@@ -60,6 +60,7 @@ struct ths_thermal_chip {
int ft_deviation;
int temp_data_base;
int (*init)(struct ths_device *tmdev);
+ int (*irq_ack)(struct ths_device *tmdev);
};
struct ths_device {
@@ -116,23 +117,34 @@ static const struct regmap_config config = {
.fast_io = true,
};
-static irqreturn_t sun50i_h6_irq_thread(int irq, void *data)
+static int sun50i_h6_irq_ack(struct ths_device *tmdev)
{
- struct ths_device *tmdev = data;
- int i, state;
+ int i, state, ret = 0;
regmap_read(tmdev->regmap, SUN50I_H6_THS_DIS, &state);
for (i = 0; i < tmdev->chip->sensor_num; i++) {
-
if (state & SUN50I_H6_THS_DATA_IRQ_STS(i)) {
- /* clear data irq pending */
regmap_write(tmdev->regmap, SUN50I_H6_THS_DIS,
SUN50I_H6_THS_DATA_IRQ_STS(i));
+ ret |= BIT(i);
+ }
+ }
+
+ return ret;
+}
+static irqreturn_t sun8i_irq_thread(int irq, void *data)
+{
+ struct ths_device *tmdev = data;
+ int i, state;
+
+ state = tmdev->chip->irq_ack(tmdev);
+
+ for (i = 0; i < tmdev->chip->sensor_num; i++) {
+ if (state & BIT(i))
thermal_zone_device_update(tmdev->sensor[i].tzd,
THERMAL_EVENT_UNSPECIFIED);
- }
}
return IRQ_HANDLED;
@@ -377,7 +389,7 @@ static int sun8i_ths_probe(struct platform_device *pdev)
* the end.
*/
ret = devm_request_threaded_irq(dev, irq, NULL,
- sun50i_h6_irq_thread,
+ sun8i_irq_thread,
IRQF_ONESHOT, "ths", tmdev);
if (ret)
return ret;
@@ -402,6 +414,7 @@ static const struct ths_thermal_chip sun50i_h6_ths = {
.ft_deviation = SUN50I_H6_FT_DEVIATION,
.temp_data_base = SUN50I_H6_THS_TEMP_DATA,
.init = sun50i_thermal_init,
+ .irq_ack = sun50i_h6_irq_ack,
};
static const struct of_device_id of_ths_match[] = {
Here, we do something to prepare for the subsequent support of multiple platforms. 1) rename sun50i_h6_irq_thread to sun8i_irq_thread, because this function should be suitable for all platforms. 2) introduce irq_ack callback to mask interrupt register differences. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> --- drivers/thermal/sun8i_thermal.c | 27 ++++++++++++++++++++------- 1 file changed, 20 insertions(+), 7 deletions(-)