| Message ID | 20190916100704.26692-4-l.luba@partner.samsung.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | Exynos5 DMC minor fixes | expand |
On Mon, 16 Sep 2019 at 12:07, Lukasz Luba <l.luba@partner.samsung.com> wrote: > > Add compatible for Samsung k3qf2f20db LPDDR3 memory bindings. > Introduce minor fixes in the old documentation. > > Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com> > --- > Documentation/devicetree/bindings/ddr/lpddr3.txt | 9 ++++++--- > 1 file changed, 6 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/ddr/lpddr3.txt b/Documentation/devicetree/bindings/ddr/lpddr3.txt > index 3b2485b84b3f..49afe794daaa 100644 > --- a/Documentation/devicetree/bindings/ddr/lpddr3.txt > +++ b/Documentation/devicetree/bindings/ddr/lpddr3.txt > @@ -1,7 +1,9 @@ > * LPDDR3 SDRAM memories compliant to JEDEC JESD209-3C > > Required properties: > -- compatible : Should be - "jedec,lpddr3" > +- compatible : should be one of the following: > + Generic default - "jedec,lpddr3". The convention is first compatible, then description. I gave you the example to base on - at25. Why making it different? Best regards, Krzysztof
Hi Krzysztof, On 9/18/19 8:51 PM, Krzysztof Kozlowski wrote: > On Mon, 16 Sep 2019 at 12:07, Lukasz Luba <l.luba@partner.samsung.com> wrote: >> >> Add compatible for Samsung k3qf2f20db LPDDR3 memory bindings. >> Introduce minor fixes in the old documentation. >> >> Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com> >> --- >> Documentation/devicetree/bindings/ddr/lpddr3.txt | 9 ++++++--- >> 1 file changed, 6 insertions(+), 3 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/ddr/lpddr3.txt b/Documentation/devicetree/bindings/ddr/lpddr3.txt >> index 3b2485b84b3f..49afe794daaa 100644 >> --- a/Documentation/devicetree/bindings/ddr/lpddr3.txt >> +++ b/Documentation/devicetree/bindings/ddr/lpddr3.txt >> @@ -1,7 +1,9 @@ >> * LPDDR3 SDRAM memories compliant to JEDEC JESD209-3C >> >> Required properties: >> -- compatible : Should be - "jedec,lpddr3" >> +- compatible : should be one of the following: >> + Generic default - "jedec,lpddr3". > > The convention is first compatible, then description. I gave you the > example to base on - at25. Why making it different? I have checked at25 that you pointed me to and also checked at24, which has a bit longer "compatible" section. I found that there are many "jedec,spi-nor" compatible devices, which I thought would be a better example for my "jedec,lpddr3". For example, two configurations, where you have a single labels or dual (with specific device) arch/arm/boot/dts/imx6dl-rex-basic.dts: compatible = "sst,sst25vf016b", "jedec,spi-nor"; arch/arm/boot/dts/imx6q-ba16.dtsi: compatible = "jedec,spi-nor"; The 'compatible' in documentation for the "jedec,spi-nor" is slightly different (similar to at24). Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt It has a long explanation, which is also OK. So I thought that it is quite flexible what you put in there. I have also checked Cadance QSPI controller. Documentation/devicetree/bindings/mtd/cadence-quadspi.txt The controller might be built-in into different vendor SoC's and the "compatible" is ready to reflect it in similar fashion but with a short explanation in this section. Therefore, what you see in the patch draw heavily on Cadence's qspi, with a bit of inspiration from jedec,spi-nor usage. Should I change it to at25 "compatible" style and send next patch? PS. Thank you for taking the other two patches. I will not respond in their threads to keep the traffic low. Regards, Lukasz
On Thu, 19 Sep 2019 at 08:49, Lukasz Luba <l.luba@partner.samsung.com> wrote: > > Hi Krzysztof, > > On 9/18/19 8:51 PM, Krzysztof Kozlowski wrote: > > On Mon, 16 Sep 2019 at 12:07, Lukasz Luba <l.luba@partner.samsung.com> wrote: > >> > >> Add compatible for Samsung k3qf2f20db LPDDR3 memory bindings. > >> Introduce minor fixes in the old documentation. > >> > >> Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com> > >> --- > >> Documentation/devicetree/bindings/ddr/lpddr3.txt | 9 ++++++--- > >> 1 file changed, 6 insertions(+), 3 deletions(-) > >> > >> diff --git a/Documentation/devicetree/bindings/ddr/lpddr3.txt b/Documentation/devicetree/bindings/ddr/lpddr3.txt > >> index 3b2485b84b3f..49afe794daaa 100644 > >> --- a/Documentation/devicetree/bindings/ddr/lpddr3.txt > >> +++ b/Documentation/devicetree/bindings/ddr/lpddr3.txt > >> @@ -1,7 +1,9 @@ > >> * LPDDR3 SDRAM memories compliant to JEDEC JESD209-3C > >> > >> Required properties: > >> -- compatible : Should be - "jedec,lpddr3" > >> +- compatible : should be one of the following: > >> + Generic default - "jedec,lpddr3". > > > > The convention is first compatible, then description. I gave you the > > example to base on - at25. Why making it different? > > I have checked at25 that you pointed me to and also checked at24, which > has a bit longer "compatible" section. > > I found that there are many "jedec,spi-nor" compatible devices, which I > thought would be a better example for my "jedec,lpddr3". > For example, two configurations, where you have a single labels or dual > (with specific device) > arch/arm/boot/dts/imx6dl-rex-basic.dts: > compatible = "sst,sst25vf016b", "jedec,spi-nor"; > arch/arm/boot/dts/imx6q-ba16.dtsi: > compatible = "jedec,spi-nor"; > > The 'compatible' in documentation for the "jedec,spi-nor" is slightly > different (similar to at24). > Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt > It has a long explanation, which is also OK. So I thought that it is > quite flexible what you put in there. It is flexible but I see clear pattern in existing sources: jedec,spi-nor.txt compatible : May include a device-specific .. ... Supported chip names: at25df321a ... at25.txt: - compatible : Should be "<vendor>,<type>", and generic value "atmel,at25". Example "<vendor>,<type>" values: "anvo,anv32e61w" "microchip,25lc040" In these cases the doc says that "compatible should be" and then you have the list of values. Your example says that the compatible should be "Generic default" or "For Samsung 542x SoC"... :) The difference is slight but putting the value first is a simple and elegant solution. In your case one has to go to the end of sentence to find the most important information - the compatible value. > I have also checked Cadance QSPI controller. > Documentation/devicetree/bindings/mtd/cadence-quadspi.txt > The controller might be built-in into different vendor SoC's > and the "compatible" is ready to reflect it in similar fashion but > with a short explanation in this section. I see. I do not find this pattern as much readable as jedec-spi-nor or at25 therefore I mentioned them as an example to base on ("Exactly the same as AT24 or AT25 EEPROM bindings."). We can avoid also this entire discussion with YAML (which also follows approach of at25 - value first). > Therefore, what you see in the patch draw heavily on Cadence's qspi, > with a bit of inspiration from jedec,spi-nor usage. > > Should I change it to at25 "compatible" style and send next patch? Yes, please. Or go to YAML and make entire discussion obsolete. Best regards, Krzysztof
On 9/19/19 9:28 AM, Krzysztof Kozlowski wrote: > On Thu, 19 Sep 2019 at 08:49, Lukasz Luba <l.luba@partner.samsung.com> wrote: >> >> Hi Krzysztof, >> >> On 9/18/19 8:51 PM, Krzysztof Kozlowski wrote: >>> On Mon, 16 Sep 2019 at 12:07, Lukasz Luba <l.luba@partner.samsung.com> wrote: >>>> >>>> Add compatible for Samsung k3qf2f20db LPDDR3 memory bindings. >>>> Introduce minor fixes in the old documentation. >>>> >>>> Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com> >>>> --- >>>> Documentation/devicetree/bindings/ddr/lpddr3.txt | 9 ++++++--- >>>> 1 file changed, 6 insertions(+), 3 deletions(-) >>>> >>>> diff --git a/Documentation/devicetree/bindings/ddr/lpddr3.txt b/Documentation/devicetree/bindings/ddr/lpddr3.txt >>>> index 3b2485b84b3f..49afe794daaa 100644 >>>> --- a/Documentation/devicetree/bindings/ddr/lpddr3.txt >>>> +++ b/Documentation/devicetree/bindings/ddr/lpddr3.txt >>>> @@ -1,7 +1,9 @@ >>>> * LPDDR3 SDRAM memories compliant to JEDEC JESD209-3C >>>> >>>> Required properties: >>>> -- compatible : Should be - "jedec,lpddr3" >>>> +- compatible : should be one of the following: >>>> + Generic default - "jedec,lpddr3". >>> >>> The convention is first compatible, then description. I gave you the >>> example to base on - at25. Why making it different? >> >> I have checked at25 that you pointed me to and also checked at24, which >> has a bit longer "compatible" section. >> >> I found that there are many "jedec,spi-nor" compatible devices, which I >> thought would be a better example for my "jedec,lpddr3". >> For example, two configurations, where you have a single labels or dual >> (with specific device) >> arch/arm/boot/dts/imx6dl-rex-basic.dts: >> compatible = "sst,sst25vf016b", "jedec,spi-nor"; >> arch/arm/boot/dts/imx6q-ba16.dtsi: >> compatible = "jedec,spi-nor"; >> >> The 'compatible' in documentation for the "jedec,spi-nor" is slightly >> different (similar to at24). >> Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt >> It has a long explanation, which is also OK. So I thought that it is >> quite flexible what you put in there. > > It is flexible but I see clear pattern in existing sources: > jedec,spi-nor.txt > compatible : May include a device-specific .. > ... > Supported chip names: > at25df321a > ... > > at25.txt: > - compatible : Should be "<vendor>,<type>", and generic value "atmel,at25". > Example "<vendor>,<type>" values: > "anvo,anv32e61w" > "microchip,25lc040" > > In these cases the doc says that "compatible should be" and then you > have the list of values. Your example says that the compatible should > be "Generic default" or "For Samsung 542x SoC"... :) The difference is > slight but putting the value first is a simple and elegant solution. > In your case one has to go to the end of sentence to find the most > important information - the compatible value. > >> I have also checked Cadance QSPI controller. >> Documentation/devicetree/bindings/mtd/cadence-quadspi.txt >> The controller might be built-in into different vendor SoC's >> and the "compatible" is ready to reflect it in similar fashion but >> with a short explanation in this section. > > I see. I do not find this pattern as much readable as jedec-spi-nor or > at25 therefore I mentioned them as an example to base on ("Exactly the > same as AT24 or AT25 EEPROM bindings."). We can avoid also this entire > discussion with YAML (which also follows approach of at25 - value > first). > >> Therefore, what you see in the patch draw heavily on Cadence's qspi, >> with a bit of inspiration from jedec,spi-nor usage. >> >> Should I change it to at25 "compatible" style and send next patch? > > Yes, please. Or go to YAML and make entire discussion obsolete. OK I will change it to at25 style. Regards, Lukasz
diff --git a/Documentation/devicetree/bindings/ddr/lpddr3.txt b/Documentation/devicetree/bindings/ddr/lpddr3.txt index 3b2485b84b3f..49afe794daaa 100644 --- a/Documentation/devicetree/bindings/ddr/lpddr3.txt +++ b/Documentation/devicetree/bindings/ddr/lpddr3.txt @@ -1,7 +1,9 @@ * LPDDR3 SDRAM memories compliant to JEDEC JESD209-3C Required properties: -- compatible : Should be - "jedec,lpddr3" +- compatible : should be one of the following: + Generic default - "jedec,lpddr3". + For Samsung 542x SoC - "samsung,K3QF2F20DB", "jedec,lpddr3". - density : <u32> representing density in Mb (Mega bits) - io-width : <u32> representing bus width. Possible values are 8, 16, 32, 64 - #address-cells: Must be set to 1 @@ -43,7 +45,7 @@ Child nodes: Example: samsung_K3QF2F20DB: lpddr3 { - compatible = "Samsung,K3QF2F20DB", "jedec,lpddr3"; + compatible = "samsung,K3QF2F20DB", "jedec,lpddr3"; density = <16384>; io-width = <32>; #address-cells = <1>; @@ -73,7 +75,8 @@ samsung_K3QF2F20DB: lpddr3 { timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 { compatible = "jedec,lpddr3-timings"; - reg = <800000000>; /* workaround: it shows max-freq */ + /* workaround: 'reg' shows max-freq */ + reg = <800000000>; min-freq = <100000000>; tRFC = <65000>; tRRD = <6000>;
Add compatible for Samsung k3qf2f20db LPDDR3 memory bindings. Introduce minor fixes in the old documentation. Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com> --- Documentation/devicetree/bindings/ddr/lpddr3.txt | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)