| Message ID | 20190923120348.2908-1-horms+renesas@verge.net.au (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Eduardo Valentin |
| Headers | show |
| Series | [v2] dt-bindings: thermal: rcar-thermal: convert bindings to json-schema | expand |
On Mon, Sep 23, 2019 at 02:03:48PM +0200, Simon Horman wrote: > Convert Renesas R-Car Thermal bindings documentation to json-schema. > Also name bindings documentation file according to the compat string > being documented. > > As a side effect of this change all currently supported/used compat > strings are listed while no while card compat string is documented. > This, in my opinion, is desirable as only supported hardware should > be documented. > > A possible follow-up is to deprecate renesas,rcar-thermal > after describing thermal zones in the DT for R-Mobile APE6 and R-Car H1. > > Signed-off-by: Simon Horman <horms+renesas@verge.net.au> > --- > Based on v5.3 > Tested using: > ARCH=arm make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/thermal/renesas,rcar-thermal.yaml > > v2 > * Update compat strings to reflect that: > - RZ/G1M and RZ/G1N are not compatible with renesas,rcar-gen2-thermal > - R-Car V3M, E3 and D3, and RZ/G2E are not compatible with > renesas,rcar-thermal > * Update reg property > - Drop uninformative comment > - Do not limit to a maximum of one item > * Add SPDX tag > --- > .../devicetree/bindings/thermal/rcar-thermal.txt | 78 -------------- > .../bindings/thermal/renesas,rcar-thermal.yaml | 116 +++++++++++++++++++++ > 2 files changed, 116 insertions(+), 78 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/thermal/rcar-thermal.txt > create mode 100644 Documentation/devicetree/bindings/thermal/renesas,rcar-thermal.yaml > diff --git a/Documentation/devicetree/bindings/thermal/renesas,rcar-thermal.yaml b/Documentation/devicetree/bindings/thermal/renesas,rcar-thermal.yaml > new file mode 100644 > index 000000000000..a55c018a3a1f > --- /dev/null > +++ b/Documentation/devicetree/bindings/thermal/renesas,rcar-thermal.yaml > @@ -0,0 +1,116 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/thermal/renesas,rcar-thermal.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Renesas R-Car Thermal > + > +maintainers: > + - Niklas Söderlund <niklas.soderlund@ragnatech.se> > + - Geert Uytterhoeven <geert+renesas@glider.be> > + > +properties: > + compatible: > + oneOf: > + - items: > + - enum: > + - renesas,thermal-r8a73a4 # R-Mobile APE6 > + - renesas,thermal-r8a7779 # R-Car H1 > + - const: renesas,rcar-thermal # Without thermal-zone > + > + - items: > + - enum: > + - renesas,thermal-r8a7790 # R-Car H2 > + - renesas,thermal-r8a7791 # R-Car M2-W > + - renesas,thermal-r8a7792 # R-Car V2H > + - renesas,thermal-r8a7793 # R-Car M2-N > + - const: renesas,rcar-gen2-thermal # With thermal-zone > + - const: renesas,rcar-thermal # Without thermal-zone > + > + - items: > + - enum: > + - renesas,thermal-r8a7743 # RZ/G1M > + - renesas,thermal-r8a7744 # RZ/G1N > + - const: renesas,rcar-gen2-thermal # With thermal-zone > + > + - items: > + - enum: > + - renesas,thermal-r8a774c0 # RZ/G2E > + - renesas,thermal-r8a77970 # R-Car V3M > + - renesas,thermal-r8a77990 # R-Car E3 > + - renesas,thermal-r8a77995 # R-Car D3 > + > + reg: true > + # The 1st reg will be recognized as common register if it has "interrupts". reg: minItems: 1 maxItems: 4 (or ?, I assume there is some known max) additionalItems: true items: - description: common register if it has "interrupts" or ... - description: ... > + > + interrupts: > + # If present should contain 3 interrupts for R-Car V3M/E3/D3 and RZ/G2E, > + # otherwise 1 interrupt. > + minItems: 1 > + maxItems: 3 > + > + clocks: > + maxItems: 1 > + > + power-domains: > + maxItems: 1 > + > +required: > + - compatible > + - reg > + > +examples : > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/clock/r8a7790-clock.h> > + > + # Example (non interrupt support): > + - | > + thermal@ffc48000 { > + compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal"; > + reg = <0xffc48000 0x38>; > + }; > + > + # Example (interrupt support): > + - | > + thermal@e61f0000 { > + compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal"; > + reg = <0xe61f0000 0x14 > + 0xe61f0100 0x38 > + 0xe61f0200 0x38 > + 0xe61f0300 0x38>; This should be bracketed for each item or the schema thinks this is 1 item instead of 4. > + interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + # Example (with thermal-zone): > + - | > + thermal-zones { > + cpu_thermal: cpu-thermal { > + polling-delay-passive = <1000>; > + polling-delay = <5000>; > + > + thermal-sensors = <&thermal>; > + > + trips { > + cpu-crit { > + temperature = <115000>; > + hysteresis = <0>; > + type = "critical"; > + }; > + }; > + cooling-maps { > + }; > + }; > + }; > + > + thermal: thermal@e61f0000 { > + compatible = "renesas,thermal-r8a7790", > + "renesas,rcar-gen2-thermal", > + "renesas,rcar-thermal"; > + reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; > + interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&mstp5_clks R8A7790_CLK_THERMAL>; > + power-domains = <&cpg_clocks>; > + #thermal-sensor-cells = <0>; > + }; > -- > 2.11.0 >
diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt deleted file mode 100644 index 196112d23b1e..000000000000 --- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt +++ /dev/null @@ -1,78 +0,0 @@ -* Renesas R-Car Thermal - -Required properties: -- compatible : "renesas,thermal-<soctype>", - "renesas,rcar-gen2-thermal" (with thermal-zone) or - "renesas,rcar-thermal" (without thermal-zone) as - fallback except R-Car V3M/E3/D3 and RZ/G2E. - Examples with soctypes are: - - "renesas,thermal-r8a73a4" (R-Mobile APE6) - - "renesas,thermal-r8a7743" (RZ/G1M) - - "renesas,thermal-r8a7744" (RZ/G1N) - - "renesas,thermal-r8a774c0" (RZ/G2E) - - "renesas,thermal-r8a7779" (R-Car H1) - - "renesas,thermal-r8a7790" (R-Car H2) - - "renesas,thermal-r8a7791" (R-Car M2-W) - - "renesas,thermal-r8a7792" (R-Car V2H) - - "renesas,thermal-r8a7793" (R-Car M2-N) - - "renesas,thermal-r8a77970" (R-Car V3M) - - "renesas,thermal-r8a77990" (R-Car E3) - - "renesas,thermal-r8a77995" (R-Car D3) -- reg : Address range of the thermal registers. - The 1st reg will be recognized as common register - if it has "interrupts". - -Option properties: - -- interrupts : If present should contain 3 interrupts for - R-Car V3M/E3/D3 and RZ/G2E or 1 interrupt otherwise. - -Example (non interrupt support): - -thermal@ffc48000 { - compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal"; - reg = <0xffc48000 0x38>; -}; - -Example (interrupt support): - -thermal@e61f0000 { - compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal"; - reg = <0xe61f0000 0x14 - 0xe61f0100 0x38 - 0xe61f0200 0x38 - 0xe61f0300 0x38>; - interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; -}; - -Example (with thermal-zone): - -thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <5000>; - - thermal-sensors = <&thermal>; - - trips { - cpu-crit { - temperature = <115000>; - hysteresis = <0>; - type = "critical"; - }; - }; - cooling-maps { - }; - }; -}; - -thermal: thermal@e61f0000 { - compatible = "renesas,thermal-r8a7790", - "renesas,rcar-gen2-thermal", - "renesas,rcar-thermal"; - reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; - interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp5_clks R8A7790_CLK_THERMAL>; - power-domains = <&cpg_clocks>; - #thermal-sensor-cells = <0>; -}; diff --git a/Documentation/devicetree/bindings/thermal/renesas,rcar-thermal.yaml b/Documentation/devicetree/bindings/thermal/renesas,rcar-thermal.yaml new file mode 100644 index 000000000000..a55c018a3a1f --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/renesas,rcar-thermal.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/renesas,rcar-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car Thermal + +maintainers: + - Niklas Söderlund <niklas.soderlund@ragnatech.se> + - Geert Uytterhoeven <geert+renesas@glider.be> + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,thermal-r8a73a4 # R-Mobile APE6 + - renesas,thermal-r8a7779 # R-Car H1 + - const: renesas,rcar-thermal # Without thermal-zone + + - items: + - enum: + - renesas,thermal-r8a7790 # R-Car H2 + - renesas,thermal-r8a7791 # R-Car M2-W + - renesas,thermal-r8a7792 # R-Car V2H + - renesas,thermal-r8a7793 # R-Car M2-N + - const: renesas,rcar-gen2-thermal # With thermal-zone + - const: renesas,rcar-thermal # Without thermal-zone + + - items: + - enum: + - renesas,thermal-r8a7743 # RZ/G1M + - renesas,thermal-r8a7744 # RZ/G1N + - const: renesas,rcar-gen2-thermal # With thermal-zone + + - items: + - enum: + - renesas,thermal-r8a774c0 # RZ/G2E + - renesas,thermal-r8a77970 # R-Car V3M + - renesas,thermal-r8a77990 # R-Car E3 + - renesas,thermal-r8a77995 # R-Car D3 + + reg: true + # The 1st reg will be recognized as common register if it has "interrupts". + + interrupts: + # If present should contain 3 interrupts for R-Car V3M/E3/D3 and RZ/G2E, + # otherwise 1 interrupt. + minItems: 1 + maxItems: 3 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + +examples : + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/r8a7790-clock.h> + + # Example (non interrupt support): + - | + thermal@ffc48000 { + compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal"; + reg = <0xffc48000 0x38>; + }; + + # Example (interrupt support): + - | + thermal@e61f0000 { + compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal"; + reg = <0xe61f0000 0x14 + 0xe61f0100 0x38 + 0xe61f0200 0x38 + 0xe61f0300 0x38>; + interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; + }; + + # Example (with thermal-zone): + - | + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + }; + }; + }; + + thermal: thermal@e61f0000 { + compatible = "renesas,thermal-r8a7790", + "renesas,rcar-gen2-thermal", + "renesas,rcar-thermal"; + reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; + interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp5_clks R8A7790_CLK_THERMAL>; + power-domains = <&cpg_clocks>; + #thermal-sensor-cells = <0>; + };
Convert Renesas R-Car Thermal bindings documentation to json-schema. Also name bindings documentation file according to the compat string being documented. As a side effect of this change all currently supported/used compat strings are listed while no while card compat string is documented. This, in my opinion, is desirable as only supported hardware should be documented. A possible follow-up is to deprecate renesas,rcar-thermal after describing thermal zones in the DT for R-Mobile APE6 and R-Car H1. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> --- Based on v5.3 Tested using: ARCH=arm make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/thermal/renesas,rcar-thermal.yaml v2 * Update compat strings to reflect that: - RZ/G1M and RZ/G1N are not compatible with renesas,rcar-gen2-thermal - R-Car V3M, E3 and D3, and RZ/G2E are not compatible with renesas,rcar-thermal * Update reg property - Drop uninformative comment - Do not limit to a maximum of one item * Add SPDX tag --- .../devicetree/bindings/thermal/rcar-thermal.txt | 78 -------------- .../bindings/thermal/renesas,rcar-thermal.yaml | 116 +++++++++++++++++++++ 2 files changed, 116 insertions(+), 78 deletions(-) delete mode 100644 Documentation/devicetree/bindings/thermal/rcar-thermal.txt create mode 100644 Documentation/devicetree/bindings/thermal/renesas,rcar-thermal.yaml