diff mbox series

[v3,1/4] dt-bindings: memory-controllers: Add Exynos5422 DMC interrupts description

Message ID 20191002060455.3834-2-l.luba@partner.samsung.com (mailing list archive)
State Not Applicable, archived
Headers show
Series Exynos5 DMC interrupt mode | expand

Commit Message

Lukasz Luba Oct. 2, 2019, 6:04 a.m. UTC
Add description for optional interrupt lines. It provides a new operation
mode, which uses internal performance counters interrupt when overflow.
This is more reliable than using default polling mode implemented in
devfreq.

Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
---
 .../bindings/memory-controllers/exynos5422-dmc.txt    | 11 +++++++++++
 1 file changed, 11 insertions(+)

Comments

Krzysztof Kozlowski Oct. 2, 2019, 5:23 p.m. UTC | #1
On Wed, Oct 02, 2019 at 08:04:52AM +0200, Lukasz Luba wrote:
> Add description for optional interrupt lines. It provides a new operation
> mode, which uses internal performance counters interrupt when overflow.
> This is more reliable than using default polling mode implemented in
> devfreq.
> 
> Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
> ---
>  .../bindings/memory-controllers/exynos5422-dmc.txt    | 11 +++++++++++

Thanks, applied.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt b/Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt
index 02aeb3b5a820..e2434cac4858 100644
--- a/Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt
@@ -31,6 +31,14 @@  Required properties for DMC device for Exynos5422:
 	The register offsets are in the driver code and specyfic for this SoC
 	type.
 
+Optional properties for DMC device for Exynos5422:
+- interrupt-parent : The parent interrupt controller.
+- interrupts : Contains the IRQ line numbers for the DMC internal performance
+  event counters in DREX0 and DREX1 channels. Align with specification of the
+  interrupt line(s) in the interrupt-parent controller.
+- interrupt-names : IRQ names "drex_0" and "drex_1", the order should be the
+  same as in the 'interrupts' list above.
+
 Example:
 
 	ppmu_dmc0_0: ppmu@10d00000 {
@@ -70,4 +78,7 @@  Example:
 		device-handle = <&samsung_K3QF2F20DB>;
 		vdd-supply = <&buck1_reg>;
 		samsung,syscon-clk = <&clock>;
+		interrupt-parent = <&combiner>;
+		interrupts = <16 0>, <16 1>;
+		interrupt-names = "drex_0", "drex_1";
 	};