@@ -93,17 +93,27 @@ static struct avs_tmon_trip avs_tmon_trips[] = {
},
};
+struct brcmstb_thermal_params {
+ unsigned int offset;
+ unsigned int mult;
+};
+
struct brcmstb_thermal_priv {
void __iomem *tmon_base;
struct device *dev;
struct thermal_zone_device *thermal;
+ /* Process specific thermal parameters used for calculations */
+ struct brcmstb_thermal_params temp_params;
};
/* Convert a HW code to a temperature reading (millidegree celsius) */
-static inline int avs_tmon_code_to_temp(struct thermal_zone_device *tz,
+static inline int avs_tmon_code_to_temp(struct brcmstb_thermal_priv *priv,
u32 code)
{
- return (410040 - (int)((code & 0x3FF) * 487));
+ int offset = priv->temp_params.offset;
+ int mult = priv->temp_params.mult;
+
+ return (offset - (int)((code & 0x3FF) * mult));
}
/*
@@ -112,19 +122,22 @@ static inline int avs_tmon_code_to_temp(struct thermal_zone_device *tz,
* @temp: temperature to convert
* @low: if true, round toward the low side
*/
-static inline u32 avs_tmon_temp_to_code(struct thermal_zone_device *tz,
+static inline u32 avs_tmon_temp_to_code(struct brcmstb_thermal_priv *priv,
int temp, bool low)
{
+ int offset = priv->temp_params.offset;
+ int mult = priv->temp_params.mult;
+
if (temp < -88161)
return 0x3FF; /* Maximum code value */
- if (temp >= 410040)
+ if (temp >= offset)
return 0; /* Minimum code value */
if (low)
- return (u32)(DIV_ROUND_UP(410040 - temp, 487));
+ return (u32)(DIV_ROUND_UP(offset - temp, mult));
else
- return (u32)((410040 - temp) / 487);
+ return (u32)((offset - temp) / mult);
}
static int brcmstb_get_temp(void *data, int *temp)
@@ -142,7 +155,7 @@ static int brcmstb_get_temp(void *data, int *temp)
val = (val & AVS_TMON_STATUS_data_msk) >> AVS_TMON_STATUS_data_shift;
- t = avs_tmon_code_to_temp(priv->thermal, val);
+ t = avs_tmon_code_to_temp(priv, val);
if (t < 0)
*temp = 0;
else
@@ -176,7 +189,7 @@ static int avs_tmon_get_trip_temp(struct brcmstb_thermal_priv *priv,
val &= trip->reg_msk;
val >>= trip->reg_shift;
- return avs_tmon_code_to_temp(priv->thermal, val);
+ return avs_tmon_code_to_temp(priv, val);
}
static void avs_tmon_set_trip_temp(struct brcmstb_thermal_priv *priv,
@@ -189,7 +202,7 @@ static void avs_tmon_set_trip_temp(struct brcmstb_thermal_priv *priv,
dev_dbg(priv->dev, "set temp %d to %d\n", type, temp);
/* round toward low temp for the low interrupt */
- val = avs_tmon_temp_to_code(priv->thermal, temp,
+ val = avs_tmon_temp_to_code(priv, temp,
type == TMON_TRIP_TYPE_LOW);
val <<= trip->reg_shift;
@@ -206,7 +219,7 @@ static int avs_tmon_get_intr_temp(struct brcmstb_thermal_priv *priv)
u32 val;
val = __raw_readl(priv->tmon_base + AVS_TMON_TEMP_INT_CODE);
- return avs_tmon_code_to_temp(priv->thermal, val);
+ return avs_tmon_code_to_temp(priv, val);
}
static irqreturn_t brcmstb_tmon_irq_thread(int irq, void *data)
@@ -270,19 +283,32 @@ static const struct thermal_zone_of_device_ops of_ops = {
.set_trips = brcmstb_set_trips,
};
+static const struct brcmstb_thermal_params brcmstb_28nm_params = {
+ .offset = 410040,
+ .mult = 487,
+};
+
static const struct of_device_id brcmstb_thermal_id_table[] = {
- { .compatible = "brcm,avs-tmon" },
+ { .compatible = "brcm,avs-tmon", .data = &brcmstb_28nm_params },
{},
};
MODULE_DEVICE_TABLE(of, brcmstb_thermal_id_table);
static int brcmstb_thermal_probe(struct platform_device *pdev)
{
+ const struct brcmstb_thermal_params *params;
+ const struct of_device_id *of_id = NULL;
struct thermal_zone_device *thermal;
struct brcmstb_thermal_priv *priv;
struct resource *res;
int irq, ret;
+ of_id = of_match_node(brcmstb_thermal_id_table, pdev->dev.of_node);
+ if (!of_id || !of_id->data)
+ return -EINVAL;
+
+ params = of_id->data;
+
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
@@ -292,6 +318,7 @@ static int brcmstb_thermal_probe(struct platform_device *pdev)
if (IS_ERR(priv->tmon_base))
return PTR_ERR(priv->tmon_base);
+ memcpy(&priv->temp_params, params, sizeof(priv->temp_params));
priv->dev = &pdev->dev;
platform_set_drvdata(pdev, priv);
The driver is currently assuming that it is operating with a 28nm process chip, which has a specific formula to convert temperature to a code and vice versa. Update the code to support providing two key values: offset and multiplier to derive the correct formulas. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- drivers/thermal/broadcom/brcmstb_thermal.c | 49 +++++++++++++++++----- 1 file changed, 38 insertions(+), 11 deletions(-)