diff mbox series

[v3,1/4] devfreq: exynos-bus: Extract exynos_bus_profile_init()

Message ID 20191209104902.11904-2-a.swigon@samsung.com (mailing list archive)
State New, archived
Headers show
Series [v3,1/4] devfreq: exynos-bus: Extract exynos_bus_profile_init() | expand

Commit Message

Artur Świgoń Dec. 9, 2019, 10:48 a.m. UTC
This patch adds a new static function, exynos_bus_profile_init(), extracted
from exynos_bus_probe().

Signed-off-by: Artur Świgoń <a.swigon@samsung.com>
---
 drivers/devfreq/exynos-bus.c | 106 ++++++++++++++++++++---------------
 1 file changed, 60 insertions(+), 46 deletions(-)

Comments

Chanwoo Choi Dec. 10, 2019, 4:20 a.m. UTC | #1
On 12/9/19 7:48 PM, Artur Świgoń wrote:
> This patch adds a new static function, exynos_bus_profile_init(), extracted
> from exynos_bus_probe().
> 
> Signed-off-by: Artur Świgoń <a.swigon@samsung.com>
> ---
>  drivers/devfreq/exynos-bus.c | 106 ++++++++++++++++++++---------------
>  1 file changed, 60 insertions(+), 46 deletions(-)
> 
> diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c
> index c832673273a2..b8ca6b9f4b82 100644
> --- a/drivers/devfreq/exynos-bus.c
> +++ b/drivers/devfreq/exynos-bus.c
> @@ -287,12 +287,69 @@ static int exynos_bus_parse_of(struct device_node *np,
>  	return ret;
>  }
>  
> +static int exynos_bus_profile_init(struct exynos_bus *bus,
> +				   struct devfreq_dev_profile *profile)
> +{
> +	struct device *dev = bus->dev;
> +	struct devfreq_simple_ondemand_data *ondemand_data;
> +	int ret;
> +
> +	/* Initialize the struct profile and governor data for parent device */
> +	profile->polling_ms = 50;
> +	profile->target = exynos_bus_target;
> +	profile->get_dev_status = exynos_bus_get_dev_status;
> +	profile->exit = exynos_bus_exit;
> +
> +	ondemand_data = devm_kzalloc(dev, sizeof(*ondemand_data), GFP_KERNEL);
> +	if (!ondemand_data) {
> +		ret = -ENOMEM;
> +		goto err;
> +	}
> +	ondemand_data->upthreshold = 40;
> +	ondemand_data->downdifferential = 5;
> +
> +	/* Add devfreq device to monitor and handle the exynos bus */
> +	bus->devfreq = devm_devfreq_add_device(dev, profile,
> +						DEVFREQ_GOV_SIMPLE_ONDEMAND,
> +						ondemand_data);
> +	if (IS_ERR(bus->devfreq)) {
> +		dev_err(dev, "failed to add devfreq device\n");
> +		ret = PTR_ERR(bus->devfreq);
> +		goto err;
> +	}
> +
> +	/* Register opp_notifier to catch the change of OPP  */
> +	ret = devm_devfreq_register_opp_notifier(dev, bus->devfreq);
> +	if (ret < 0) {
> +		dev_err(dev, "failed to register opp notifier\n");
> +		goto err;
> +	}
> +
> +	/*
> +	 * Enable devfreq-event to get raw data which is used to determine
> +	 * current bus load.
> +	 */
> +	ret = exynos_bus_enable_edev(bus);
> +	if (ret < 0) {
> +		dev_err(dev, "failed to enable devfreq-event devices\n");
> +		goto err;
> +	}
> +
> +	ret = exynos_bus_set_event(bus);
> +	if (ret < 0) {
> +		dev_err(dev, "failed to set event to devfreq-event devices\n");
> +		goto err;
> +	}
> +
> +err:
> +	return ret;
> +}
> +
>  static int exynos_bus_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
>  	struct device_node *np = dev->of_node, *node;
>  	struct devfreq_dev_profile *profile;
> -	struct devfreq_simple_ondemand_data *ondemand_data;
>  	struct devfreq_passive_data *passive_data;
>  	struct devfreq *parent_devfreq;
>  	struct exynos_bus *bus;
> @@ -334,52 +391,9 @@ static int exynos_bus_probe(struct platform_device *pdev)
>  	if (passive)
>  		goto passive;
>  
> -	/* Initialize the struct profile and governor data for parent device */
> -	profile->polling_ms = 50;
> -	profile->target = exynos_bus_target;
> -	profile->get_dev_status = exynos_bus_get_dev_status;
> -	profile->exit = exynos_bus_exit;
> -
> -	ondemand_data = devm_kzalloc(dev, sizeof(*ondemand_data), GFP_KERNEL);
> -	if (!ondemand_data) {
> -		ret = -ENOMEM;
> +	ret = exynos_bus_profile_init(bus, profile);
> +	if (ret < 0)
>  		goto err;
> -	}
> -	ondemand_data->upthreshold = 40;
> -	ondemand_data->downdifferential = 5;
> -
> -	/* Add devfreq device to monitor and handle the exynos bus */
> -	bus->devfreq = devm_devfreq_add_device(dev, profile,
> -						DEVFREQ_GOV_SIMPLE_ONDEMAND,
> -						ondemand_data);
> -	if (IS_ERR(bus->devfreq)) {
> -		dev_err(dev, "failed to add devfreq device\n");
> -		ret = PTR_ERR(bus->devfreq);
> -		goto err;
> -	}
> -
> -	/* Register opp_notifier to catch the change of OPP  */
> -	ret = devm_devfreq_register_opp_notifier(dev, bus->devfreq);
> -	if (ret < 0) {
> -		dev_err(dev, "failed to register opp notifier\n");
> -		goto err;
> -	}
> -
> -	/*
> -	 * Enable devfreq-event to get raw data which is used to determine
> -	 * current bus load.
> -	 */
> -	ret = exynos_bus_enable_edev(bus);
> -	if (ret < 0) {
> -		dev_err(dev, "failed to enable devfreq-event devices\n");
> -		goto err;
> -	}
> -
> -	ret = exynos_bus_set_event(bus);
> -	if (ret < 0) {
> -		dev_err(dev, "failed to set event to devfreq-event devices\n");
> -		goto err;
> -	}
>  
>  	goto out;
>  passive:
> 

Applied it. Thanks.
diff mbox series

Patch

diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c
index c832673273a2..b8ca6b9f4b82 100644
--- a/drivers/devfreq/exynos-bus.c
+++ b/drivers/devfreq/exynos-bus.c
@@ -287,12 +287,69 @@  static int exynos_bus_parse_of(struct device_node *np,
 	return ret;
 }
 
+static int exynos_bus_profile_init(struct exynos_bus *bus,
+				   struct devfreq_dev_profile *profile)
+{
+	struct device *dev = bus->dev;
+	struct devfreq_simple_ondemand_data *ondemand_data;
+	int ret;
+
+	/* Initialize the struct profile and governor data for parent device */
+	profile->polling_ms = 50;
+	profile->target = exynos_bus_target;
+	profile->get_dev_status = exynos_bus_get_dev_status;
+	profile->exit = exynos_bus_exit;
+
+	ondemand_data = devm_kzalloc(dev, sizeof(*ondemand_data), GFP_KERNEL);
+	if (!ondemand_data) {
+		ret = -ENOMEM;
+		goto err;
+	}
+	ondemand_data->upthreshold = 40;
+	ondemand_data->downdifferential = 5;
+
+	/* Add devfreq device to monitor and handle the exynos bus */
+	bus->devfreq = devm_devfreq_add_device(dev, profile,
+						DEVFREQ_GOV_SIMPLE_ONDEMAND,
+						ondemand_data);
+	if (IS_ERR(bus->devfreq)) {
+		dev_err(dev, "failed to add devfreq device\n");
+		ret = PTR_ERR(bus->devfreq);
+		goto err;
+	}
+
+	/* Register opp_notifier to catch the change of OPP  */
+	ret = devm_devfreq_register_opp_notifier(dev, bus->devfreq);
+	if (ret < 0) {
+		dev_err(dev, "failed to register opp notifier\n");
+		goto err;
+	}
+
+	/*
+	 * Enable devfreq-event to get raw data which is used to determine
+	 * current bus load.
+	 */
+	ret = exynos_bus_enable_edev(bus);
+	if (ret < 0) {
+		dev_err(dev, "failed to enable devfreq-event devices\n");
+		goto err;
+	}
+
+	ret = exynos_bus_set_event(bus);
+	if (ret < 0) {
+		dev_err(dev, "failed to set event to devfreq-event devices\n");
+		goto err;
+	}
+
+err:
+	return ret;
+}
+
 static int exynos_bus_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node, *node;
 	struct devfreq_dev_profile *profile;
-	struct devfreq_simple_ondemand_data *ondemand_data;
 	struct devfreq_passive_data *passive_data;
 	struct devfreq *parent_devfreq;
 	struct exynos_bus *bus;
@@ -334,52 +391,9 @@  static int exynos_bus_probe(struct platform_device *pdev)
 	if (passive)
 		goto passive;
 
-	/* Initialize the struct profile and governor data for parent device */
-	profile->polling_ms = 50;
-	profile->target = exynos_bus_target;
-	profile->get_dev_status = exynos_bus_get_dev_status;
-	profile->exit = exynos_bus_exit;
-
-	ondemand_data = devm_kzalloc(dev, sizeof(*ondemand_data), GFP_KERNEL);
-	if (!ondemand_data) {
-		ret = -ENOMEM;
+	ret = exynos_bus_profile_init(bus, profile);
+	if (ret < 0)
 		goto err;
-	}
-	ondemand_data->upthreshold = 40;
-	ondemand_data->downdifferential = 5;
-
-	/* Add devfreq device to monitor and handle the exynos bus */
-	bus->devfreq = devm_devfreq_add_device(dev, profile,
-						DEVFREQ_GOV_SIMPLE_ONDEMAND,
-						ondemand_data);
-	if (IS_ERR(bus->devfreq)) {
-		dev_err(dev, "failed to add devfreq device\n");
-		ret = PTR_ERR(bus->devfreq);
-		goto err;
-	}
-
-	/* Register opp_notifier to catch the change of OPP  */
-	ret = devm_devfreq_register_opp_notifier(dev, bus->devfreq);
-	if (ret < 0) {
-		dev_err(dev, "failed to register opp notifier\n");
-		goto err;
-	}
-
-	/*
-	 * Enable devfreq-event to get raw data which is used to determine
-	 * current bus load.
-	 */
-	ret = exynos_bus_enable_edev(bus);
-	if (ret < 0) {
-		dev_err(dev, "failed to enable devfreq-event devices\n");
-		goto err;
-	}
-
-	ret = exynos_bus_set_event(bus);
-	if (ret < 0) {
-		dev_err(dev, "failed to set event to devfreq-event devices\n");
-		goto err;
-	}
 
 	goto out;
 passive: