| Message ID | 20200116105909.29281-1-cw00.choi@samsung.com (mailing list archive) |
|---|---|
| State | Accepted |
| Delegated to: | Chanwoo Choi |
| Headers | show |
| Series | [v5] PM / devfreq: Add debugfs support with devfreq_summary file | expand |
On 1/16/20 7:59 PM, Chanwoo Choi wrote: > Add debugfs interface to provide debugging information of devfreq device. > It contains 'devfreq_summary' entry to show the summary of registered > devfreq devices as following and the additional debugfs file will be added. > - /sys/kernel/debug/devfreq/devfreq_summary > > [Detailed description of each field of 'devfreq_summary' debugfs file] > - dev_name : Device name of h/w > - dev : Device name made by devfreq core > - parent_dev : If devfreq device uses the passive governor, > show parent devfreq device name. Otherwise, show 'null'. > - governor : Devfreq governor name > - polling_ms : If devfreq device uses the simple_ondemand governor, > polling_ms is necessary for the period. (unit: millisecond) > - cur_freq_Hz : Current frequency (unit: Hz) > - min_freq_Hz : Minimum frequency (unit: Hz) > - max_freq_Hz : Maximum frequency (unit: Hz) > > [For example on Exynos5422-based Odroid-XU3 board] > $ cat /sys/kernel/debug/devfreq/devfreq_summary > dev_name dev parent_dev governor polling_ms cur_freq_Hz min_freq_Hz max_freq_Hz > ------------------------------ ---------- ---------- --------------- ---------- ------------ ------------ ------------ > 10c20000.memory-controller devfreq0 null simple_ondemand 0 165000000 165000000 825000000 > soc:bus_wcore devfreq1 null simple_ondemand 50 532000000 88700000 532000000 > soc:bus_noc devfreq2 devfreq1 passive 0 111000000 66600000 111000000 > soc:bus_fsys_apb devfreq3 devfreq1 passive 0 222000000 111000000 222000000 > soc:bus_fsys devfreq4 devfreq1 passive 0 200000000 75000000 200000000 > soc:bus_fsys2 devfreq5 devfreq1 passive 0 200000000 75000000 200000000 > soc:bus_mfc devfreq6 devfreq1 passive 0 333000000 83250000 333000000 > soc:bus_gen devfreq7 devfreq1 passive 0 266000000 88700000 266000000 > soc:bus_peri devfreq8 devfreq1 passive 0 66600000 66600000 66600000 > soc:bus_g2d devfreq9 devfreq1 passive 0 333000000 83250000 333000000 > soc:bus_g2d_acp devfreq10 devfreq1 passive 0 266000000 66500000 266000000 > soc:bus_jpeg devfreq11 devfreq1 passive 0 300000000 75000000 300000000 > soc:bus_jpeg_apb devfreq12 devfreq1 passive 0 166500000 83250000 166500000 > soc:bus_disp1_fimd devfreq13 devfreq1 passive 0 200000000 120000000 200000000 > soc:bus_disp1 devfreq14 devfreq1 passive 0 300000000 120000000 300000000 > soc:bus_gscl_scaler devfreq15 devfreq1 passive 0 300000000 150000000 300000000 > soc:bus_mscl devfreq16 devfreq1 passive 0 666000000 84000000 666000000 > > [lkp: Reported the build error] > Reported-by: kbuild test robot <lkp@intel.com> > Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> > --- > Changes from v4: > - Fix wrong patch description > Changes from v3: > - Remove the unneeded checking of return value when calling debugfs_create_dir > - Add missing IS_ENABLED(CONFIG_DEVFREQ_GOV_PASSIVE) condition > Changes from v2: > - Show 'null' at 'parent_dev' field when governor of devfreq device > is not passive > Changes from v1: > - Drop the patch about 'devfreq_transitions' debugfs file > - Modify from 'hz' to 'Hz' > - Edit the indentation of 'devfreq_summary' when show summary > - Exchange sequence between PTR_ERR and IS_ERR when debugfs_create_dir > > drivers/devfreq/devfreq.c | 82 +++++++++++++++++++++++++++++++++++++++ > 1 file changed, 82 insertions(+) > > diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c > index 89260b17598f..cceee8bc3c2f 100644 > --- a/drivers/devfreq/devfreq.c > +++ b/drivers/devfreq/devfreq.c > @@ -10,6 +10,7 @@ > #include <linux/kernel.h> > #include <linux/kmod.h> > #include <linux/sched.h> > +#include <linux/debugfs.h> > #include <linux/errno.h> > #include <linux/err.h> > #include <linux/init.h> > @@ -33,6 +34,7 @@ > #define HZ_PER_KHZ 1000 > > static struct class *devfreq_class; > +static struct dentry *devfreq_debugfs; > > /* > * devfreq core provides delayed work based load monitoring helper > @@ -1643,6 +1645,81 @@ static struct attribute *devfreq_attrs[] = { > }; > ATTRIBUTE_GROUPS(devfreq); > > +/** > + * devfreq_summary_show() - Show the summary of the devfreq devices > + * @s: seq_file instance to show the summary of devfreq devices > + * @data: not used > + * > + * Show the summary of the devfreq devices via 'devfreq_summary' debugfs file. > + * It helps that user can know the detailed information of the devfreq devices. > + * > + * Return 0 always because it shows the information without any data change. > + */ > +static int devfreq_summary_show(struct seq_file *s, void *data) > +{ > + struct devfreq *devfreq; > + struct devfreq *p_devfreq = NULL; > + unsigned long cur_freq, min_freq, max_freq; > + unsigned int polling_ms; > + > + seq_printf(s, "%-30s %-10s %-10s %-15s %10s %12s %12s %12s\n", > + "dev_name", > + "dev", > + "parent_dev", > + "governor", > + "polling_ms", > + "cur_freq_Hz", > + "min_freq_Hz", > + "max_freq_Hz"); > + seq_printf(s, "%30s %10s %10s %15s %10s %12s %12s %12s\n", > + "------------------------------", > + "----------", > + "----------", > + "---------------", > + "----------", > + "------------", > + "------------", > + "------------"); > + > + mutex_lock(&devfreq_list_lock); > + > + list_for_each_entry_reverse(devfreq, &devfreq_list, node) { > +#if IS_ENABLED(CONFIG_DEVFREQ_GOV_PASSIVE) > + if (!strncmp(devfreq->governor_name, DEVFREQ_GOV_PASSIVE, > + DEVFREQ_NAME_LEN)) { > + struct devfreq_passive_data *data = devfreq->data; > + > + if (data) > + p_devfreq = data->parent; > + } else { > + p_devfreq = NULL; > + } > +#endif > + > + mutex_lock(&devfreq->lock); > + cur_freq = devfreq->previous_freq, > + get_freq_range(devfreq, &min_freq, &max_freq); > + polling_ms = devfreq->profile->polling_ms, > + mutex_unlock(&devfreq->lock); > + > + seq_printf(s, > + "%-30s %-10s %-10s %-15s %10d %12ld %12ld %12ld\n", > + dev_name(devfreq->dev.parent), > + dev_name(&devfreq->dev), > + p_devfreq ? dev_name(&p_devfreq->dev) : "null", > + devfreq->governor_name, > + polling_ms, > + cur_freq, > + min_freq, > + max_freq); > + } > + > + mutex_unlock(&devfreq_list_lock); > + > + return 0; > +} > +DEFINE_SHOW_ATTRIBUTE(devfreq_summary); > + > static int __init devfreq_init(void) > { > devfreq_class = class_create(THIS_MODULE, "devfreq"); > @@ -1659,6 +1736,11 @@ static int __init devfreq_init(void) > } > devfreq_class->dev_groups = devfreq_groups; > > + devfreq_debugfs = debugfs_create_dir("devfreq", NULL); > + debugfs_create_file("devfreq_summary", 0444, > + devfreq_debugfs, NULL, > + &devfreq_summary_fops); > + > return 0; > } > subsys_initcall(devfreq_init); > Applied it.
On 16.01.2020 12:51, Chanwoo Choi wrote: > Add debugfs interface to provide debugging information of devfreq device. > It contains 'devfreq_summary' entry to show the summary of registered > devfreq devices as following and the additional debugfs file will be added. > - /sys/kernel/debug/devfreq/devfreq_summary > > [Detailed description of each field of 'devfreq_summary' debugfs file] > - dev_name : Device name of h/w > - dev : Device name made by devfreq core > - parent_dev : If devfreq device uses the passive governor, > show parent devfreq device name. Otherwise, show 'null'. > - governor : Devfreq governor name > - polling_ms : If devfreq device uses the simple_ondemand governor, > polling_ms is necessary for the period. (unit: millisecond) > - cur_freq_Hz : Current frequency (unit: Hz) > - min_freq_Hz : Minimum frequency (unit: Hz) > - max_freq_Hz : Maximum frequency (unit: Hz) > > [For example on Exynos5422-based Odroid-XU3 board] > $ cat /sys/kernel/debug/devfreq/devfreq_summary > dev_name dev parent_dev governor polling_ms cur_freq_Hz min_freq_Hz max_freq_Hz > ------------------------------ ---------- ---------- --------------- ---------- ------------ ------------ ------------ > 10c20000.memory-controller devfreq0 null simple_ondemand 0 165000000 165000000 825000000 > soc:bus_wcore devfreq1 null simple_ondemand 50 532000000 88700000 532000000 > soc:bus_noc devfreq2 devfreq1 passive 0 111000000 66600000 111000000 > soc:bus_fsys_apb devfreq3 devfreq1 passive 0 222000000 111000000 222000000 > soc:bus_fsys devfreq4 devfreq1 passive 0 200000000 75000000 200000000 > soc:bus_fsys2 devfreq5 devfreq1 passive 0 200000000 75000000 200000000 > soc:bus_mfc devfreq6 devfreq1 passive 0 333000000 83250000 333000000 > soc:bus_gen devfreq7 devfreq1 passive 0 266000000 88700000 266000000 > soc:bus_peri devfreq8 devfreq1 passive 0 66600000 66600000 66600000 > soc:bus_g2d devfreq9 devfreq1 passive 0 333000000 83250000 333000000 > soc:bus_g2d_acp devfreq10 devfreq1 passive 0 266000000 66500000 266000000 > soc:bus_jpeg devfreq11 devfreq1 passive 0 300000000 75000000 300000000 > soc:bus_jpeg_apb devfreq12 devfreq1 passive 0 166500000 83250000 166500000 > soc:bus_disp1_fimd devfreq13 devfreq1 passive 0 200000000 120000000 200000000 > soc:bus_disp1 devfreq14 devfreq1 passive 0 300000000 120000000 300000000 > soc:bus_gscl_scaler devfreq15 devfreq1 passive 0 300000000 150000000 300000000 > soc:bus_mscl devfreq16 devfreq1 passive 0 666000000 84000000 666000000 > > [lkp: Reported the build error] > Reported-by: kbuild test robot <lkp@intel.com> I'm not sure I understand why this is mentioned in the commit message. If kbuild robot reports an error for an in-flight patch that's not usually mention in the commit message. > Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> > --- > Changes from v4: > - Fix wrong patch description > Changes from v3: > - Remove the unneeded checking of return value when calling debugfs_create_dir > - Add missing IS_ENABLED(CONFIG_DEVFREQ_GOV_PASSIVE) condition > Changes from v2: > - Show 'null' at 'parent_dev' field when governor of devfreq device > is not passive > Changes from v1: > - Drop the patch about 'devfreq_transitions' debugfs file > - Modify from 'hz' to 'Hz' > - Edit the indentation of 'devfreq_summary' when show summary > - Exchange sequence between PTR_ERR and IS_ERR when debugfs_create_dir > > drivers/devfreq/devfreq.c | 82 +++++++++++++++++++++++++++++++++++++++ > 1 file changed, 82 insertions(+) > > diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c > index 89260b17598f..cceee8bc3c2f 100644 > --- a/drivers/devfreq/devfreq.c > +++ b/drivers/devfreq/devfreq.c > @@ -10,6 +10,7 @@ > #include <linux/kernel.h> > #include <linux/kmod.h> > #include <linux/sched.h> > +#include <linux/debugfs.h> > #include <linux/errno.h> > #include <linux/err.h> > #include <linux/init.h> > @@ -33,6 +34,7 @@ > #define HZ_PER_KHZ 1000 > > static struct class *devfreq_class; > +static struct dentry *devfreq_debugfs; > > /* > * devfreq core provides delayed work based load monitoring helper > @@ -1643,6 +1645,81 @@ static struct attribute *devfreq_attrs[] = { > }; > ATTRIBUTE_GROUPS(devfreq); > > +/** > + * devfreq_summary_show() - Show the summary of the devfreq devices > + * @s: seq_file instance to show the summary of devfreq devices > + * @data: not used > + * > + * Show the summary of the devfreq devices via 'devfreq_summary' debugfs file. > + * It helps that user can know the detailed information of the devfreq devices. > + * > + * Return 0 always because it shows the information without any data change. > + */ > +static int devfreq_summary_show(struct seq_file *s, void *data) > +{ > + struct devfreq *devfreq; > + struct devfreq *p_devfreq = NULL; > + unsigned long cur_freq, min_freq, max_freq; > + unsigned int polling_ms; > + > + seq_printf(s, "%-30s %-10s %-10s %-15s %10s %12s %12s %12s\n", > + "dev_name", > + "dev", > + "parent_dev", > + "governor", > + "polling_ms", > + "cur_freq_Hz", > + "min_freq_Hz", > + "max_freq_Hz"); > + seq_printf(s, "%30s %10s %10s %15s %10s %12s %12s %12s\n", > + "------------------------------", > + "----------", > + "----------", > + "---------------", > + "----------", > + "------------", > + "------------", > + "------------"); > + > + mutex_lock(&devfreq_list_lock); > + > + list_for_each_entry_reverse(devfreq, &devfreq_list, node) { > +#if IS_ENABLED(CONFIG_DEVFREQ_GOV_PASSIVE) > + if (!strncmp(devfreq->governor_name, DEVFREQ_GOV_PASSIVE, > + DEVFREQ_NAME_LEN)) { > + struct devfreq_passive_data *data = devfreq->data; > + > + if (data) > + p_devfreq = data->parent; > + } else { > + p_devfreq = NULL; > + } > +#endif > + > + mutex_lock(&devfreq->lock); > + cur_freq = devfreq->previous_freq, > + get_freq_range(devfreq, &min_freq, &max_freq); > + polling_ms = devfreq->profile->polling_ms, > + mutex_unlock(&devfreq->lock); > + > + seq_printf(s, > + "%-30s %-10s %-10s %-15s %10d %12ld %12ld %12ld\n", > + dev_name(devfreq->dev.parent), > + dev_name(&devfreq->dev), > + p_devfreq ? dev_name(&p_devfreq->dev) : "null", > + devfreq->governor_name, > + polling_ms, > + cur_freq, > + min_freq, > + max_freq); > + } > + > + mutex_unlock(&devfreq_list_lock); > + > + return 0; > +} > +DEFINE_SHOW_ATTRIBUTE(devfreq_summary); > + > static int __init devfreq_init(void) > { > devfreq_class = class_create(THIS_MODULE, "devfreq"); > @@ -1659,6 +1736,11 @@ static int __init devfreq_init(void) > } > devfreq_class->dev_groups = devfreq_groups; > > + devfreq_debugfs = debugfs_create_dir("devfreq", NULL); > + debugfs_create_file("devfreq_summary", 0444, > + devfreq_debugfs, NULL, > + &devfreq_summary_fops); > + > return 0; > } > subsys_initcall(devfreq_init); >
diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index 89260b17598f..cceee8bc3c2f 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/kmod.h> #include <linux/sched.h> +#include <linux/debugfs.h> #include <linux/errno.h> #include <linux/err.h> #include <linux/init.h> @@ -33,6 +34,7 @@ #define HZ_PER_KHZ 1000 static struct class *devfreq_class; +static struct dentry *devfreq_debugfs; /* * devfreq core provides delayed work based load monitoring helper @@ -1643,6 +1645,81 @@ static struct attribute *devfreq_attrs[] = { }; ATTRIBUTE_GROUPS(devfreq); +/** + * devfreq_summary_show() - Show the summary of the devfreq devices + * @s: seq_file instance to show the summary of devfreq devices + * @data: not used + * + * Show the summary of the devfreq devices via 'devfreq_summary' debugfs file. + * It helps that user can know the detailed information of the devfreq devices. + * + * Return 0 always because it shows the information without any data change. + */ +static int devfreq_summary_show(struct seq_file *s, void *data) +{ + struct devfreq *devfreq; + struct devfreq *p_devfreq = NULL; + unsigned long cur_freq, min_freq, max_freq; + unsigned int polling_ms; + + seq_printf(s, "%-30s %-10s %-10s %-15s %10s %12s %12s %12s\n", + "dev_name", + "dev", + "parent_dev", + "governor", + "polling_ms", + "cur_freq_Hz", + "min_freq_Hz", + "max_freq_Hz"); + seq_printf(s, "%30s %10s %10s %15s %10s %12s %12s %12s\n", + "------------------------------", + "----------", + "----------", + "---------------", + "----------", + "------------", + "------------", + "------------"); + + mutex_lock(&devfreq_list_lock); + + list_for_each_entry_reverse(devfreq, &devfreq_list, node) { +#if IS_ENABLED(CONFIG_DEVFREQ_GOV_PASSIVE) + if (!strncmp(devfreq->governor_name, DEVFREQ_GOV_PASSIVE, + DEVFREQ_NAME_LEN)) { + struct devfreq_passive_data *data = devfreq->data; + + if (data) + p_devfreq = data->parent; + } else { + p_devfreq = NULL; + } +#endif + + mutex_lock(&devfreq->lock); + cur_freq = devfreq->previous_freq, + get_freq_range(devfreq, &min_freq, &max_freq); + polling_ms = devfreq->profile->polling_ms, + mutex_unlock(&devfreq->lock); + + seq_printf(s, + "%-30s %-10s %-10s %-15s %10d %12ld %12ld %12ld\n", + dev_name(devfreq->dev.parent), + dev_name(&devfreq->dev), + p_devfreq ? dev_name(&p_devfreq->dev) : "null", + devfreq->governor_name, + polling_ms, + cur_freq, + min_freq, + max_freq); + } + + mutex_unlock(&devfreq_list_lock); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(devfreq_summary); + static int __init devfreq_init(void) { devfreq_class = class_create(THIS_MODULE, "devfreq"); @@ -1659,6 +1736,11 @@ static int __init devfreq_init(void) } devfreq_class->dev_groups = devfreq_groups; + devfreq_debugfs = debugfs_create_dir("devfreq", NULL); + debugfs_create_file("devfreq_summary", 0444, + devfreq_debugfs, NULL, + &devfreq_summary_fops); + return 0; } subsys_initcall(devfreq_init);
Add debugfs interface to provide debugging information of devfreq device. It contains 'devfreq_summary' entry to show the summary of registered devfreq devices as following and the additional debugfs file will be added. - /sys/kernel/debug/devfreq/devfreq_summary [Detailed description of each field of 'devfreq_summary' debugfs file] - dev_name : Device name of h/w - dev : Device name made by devfreq core - parent_dev : If devfreq device uses the passive governor, show parent devfreq device name. Otherwise, show 'null'. - governor : Devfreq governor name - polling_ms : If devfreq device uses the simple_ondemand governor, polling_ms is necessary for the period. (unit: millisecond) - cur_freq_Hz : Current frequency (unit: Hz) - min_freq_Hz : Minimum frequency (unit: Hz) - max_freq_Hz : Maximum frequency (unit: Hz) [For example on Exynos5422-based Odroid-XU3 board] $ cat /sys/kernel/debug/devfreq/devfreq_summary dev_name dev parent_dev governor polling_ms cur_freq_Hz min_freq_Hz max_freq_Hz ------------------------------ ---------- ---------- --------------- ---------- ------------ ------------ ------------ 10c20000.memory-controller devfreq0 null simple_ondemand 0 165000000 165000000 825000000 soc:bus_wcore devfreq1 null simple_ondemand 50 532000000 88700000 532000000 soc:bus_noc devfreq2 devfreq1 passive 0 111000000 66600000 111000000 soc:bus_fsys_apb devfreq3 devfreq1 passive 0 222000000 111000000 222000000 soc:bus_fsys devfreq4 devfreq1 passive 0 200000000 75000000 200000000 soc:bus_fsys2 devfreq5 devfreq1 passive 0 200000000 75000000 200000000 soc:bus_mfc devfreq6 devfreq1 passive 0 333000000 83250000 333000000 soc:bus_gen devfreq7 devfreq1 passive 0 266000000 88700000 266000000 soc:bus_peri devfreq8 devfreq1 passive 0 66600000 66600000 66600000 soc:bus_g2d devfreq9 devfreq1 passive 0 333000000 83250000 333000000 soc:bus_g2d_acp devfreq10 devfreq1 passive 0 266000000 66500000 266000000 soc:bus_jpeg devfreq11 devfreq1 passive 0 300000000 75000000 300000000 soc:bus_jpeg_apb devfreq12 devfreq1 passive 0 166500000 83250000 166500000 soc:bus_disp1_fimd devfreq13 devfreq1 passive 0 200000000 120000000 200000000 soc:bus_disp1 devfreq14 devfreq1 passive 0 300000000 120000000 300000000 soc:bus_gscl_scaler devfreq15 devfreq1 passive 0 300000000 150000000 300000000 soc:bus_mscl devfreq16 devfreq1 passive 0 666000000 84000000 666000000 [lkp: Reported the build error] Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> --- Changes from v4: - Fix wrong patch description Changes from v3: - Remove the unneeded checking of return value when calling debugfs_create_dir - Add missing IS_ENABLED(CONFIG_DEVFREQ_GOV_PASSIVE) condition Changes from v2: - Show 'null' at 'parent_dev' field when governor of devfreq device is not passive Changes from v1: - Drop the patch about 'devfreq_transitions' debugfs file - Modify from 'hz' to 'Hz' - Edit the indentation of 'devfreq_summary' when show summary - Exchange sequence between PTR_ERR and IS_ERR when debugfs_create_dir drivers/devfreq/devfreq.c | 82 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 82 insertions(+)