deleted file mode 100644
@@ -1,78 +0,0 @@
-* Renesas R-Car Thermal
-
-Required properties:
-- compatible : "renesas,thermal-<soctype>",
- "renesas,rcar-gen2-thermal" (with thermal-zone) or
- "renesas,rcar-thermal" (without thermal-zone) as
- fallback except R-Car V3M/E3/D3 and RZ/G2E.
- Examples with soctypes are:
- - "renesas,thermal-r8a73a4" (R-Mobile APE6)
- - "renesas,thermal-r8a7743" (RZ/G1M)
- - "renesas,thermal-r8a7744" (RZ/G1N)
- - "renesas,thermal-r8a774c0" (RZ/G2E)
- - "renesas,thermal-r8a7779" (R-Car H1)
- - "renesas,thermal-r8a7790" (R-Car H2)
- - "renesas,thermal-r8a7791" (R-Car M2-W)
- - "renesas,thermal-r8a7792" (R-Car V2H)
- - "renesas,thermal-r8a7793" (R-Car M2-N)
- - "renesas,thermal-r8a77970" (R-Car V3M)
- - "renesas,thermal-r8a77990" (R-Car E3)
- - "renesas,thermal-r8a77995" (R-Car D3)
-- reg : Address range of the thermal registers.
- The 1st reg will be recognized as common register
- if it has "interrupts".
-
-Option properties:
-
-- interrupts : If present should contain 3 interrupts for
- R-Car V3M/E3/D3 and RZ/G2E or 1 interrupt otherwise.
-
-Example (non interrupt support):
-
-thermal@ffc48000 {
- compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal";
- reg = <0xffc48000 0x38>;
-};
-
-Example (interrupt support):
-
-thermal@e61f0000 {
- compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
- reg = <0xe61f0000 0x14
- 0xe61f0100 0x38
- 0xe61f0200 0x38
- 0xe61f0300 0x38>;
- interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-Example (with thermal-zone):
-
-thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <1000>;
- polling-delay = <5000>;
-
- thermal-sensors = <&thermal>;
-
- trips {
- cpu-crit {
- temperature = <115000>;
- hysteresis = <0>;
- type = "critical";
- };
- };
- cooling-maps {
- };
- };
-};
-
-thermal: thermal@e61f0000 {
- compatible = "renesas,thermal-r8a7790",
- "renesas,rcar-gen2-thermal",
- "renesas,rcar-thermal";
- reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
- interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
- power-domains = <&cpg_clocks>;
- #thermal-sensor-cells = <0>;
-};
new file mode 100644
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Copyright (C) 2020 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/rcar-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Thermal
+
+maintainers:
+ - Niklas Söderlund <niklas.soderlund@ragnatech.se>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - renesas,thermal-r8a73a4 # R-Mobile APE6
+ - renesas,thermal-r8a7779 # R-Car H1
+ - const: renesas,rcar-thermal # Generic without thermal-zone
+ - items:
+ - enum:
+ - renesas,thermal-r8a7743 # RZ/G1M
+ - renesas,thermal-r8a7744 # RZ/G1N
+ - const: renesas,rcar-gen2-thermal # Generic thermal-zone
+ - items:
+ - enum:
+ - renesas,thermal-r8a7790 # R-Car H2
+ - renesas,thermal-r8a7791 # R-Car M2-W
+ - renesas,thermal-r8a7792 # R-Car V2H
+ - renesas,thermal-r8a7793 # R-Car M2-N
+ - const: renesas,rcar-gen2-thermal # Generic thermal-zone
+ - const: renesas,rcar-thermal # Generic without thermal-zone
+ - items:
+ - enum:
+ - renesas,thermal-r8a774c0 # RZ/G2E
+ - renesas,thermal-r8a77970 # R-Car V3M
+ - renesas,thermal-r8a77990 # R-Car E3
+ - renesas,thermal-r8a77995 # R-Car D3
+ reg:
+ description:
+ Address ranges of the thermal registers. If more then one range is given
+ the first one must be the common registers followed by each sensor
+ according the the datasheet.
+ minItems: 1
+ maxItems: 4
+
+ interrupts:
+ minItems: 1
+ maxItems: 3
+
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,thermal-r8a73a4 # R-Mobile APE6
+ - renesas,thermal-r8a7779 # R-Car H1
+then:
+ required:
+ - compatible
+ - reg
+else:
+ required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - power-domains
+ - resets
+
+examples:
+ # Example (non interrupt support)
+ - |
+ thermal@ffc48000 {
+ compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal";
+ reg = <0xffc48000 0x38>;
+ };
+
+ # Example (interrupt support)
+ - |
+ #include <dt-bindings/clock/r8a73a4-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ thermal@e61f0000 {
+ compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
+ reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>,
+ <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>;
+ power-domains = <&pd_c5>;
+ };
+
+ # Example (with thermal-zone)
+ - |
+ #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/r8a7790-sysc.h>
+
+ thermal: thermal@e61f0000 {
+ compatible = "renesas,thermal-r8a7790",
+ "renesas,rcar-gen2-thermal",
+ "renesas,rcar-thermal";
+ reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 522>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 522>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+
+ thermal-sensors = <&thermal>;
+
+ trips {
+ cpu-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ };
+ };
+ };
Convert Renesas R-Car Thermal bindings documentation to json-schema. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> --- .../bindings/thermal/rcar-thermal.txt | 78 ---------- .../bindings/thermal/rcar-thermal.yaml | 139 ++++++++++++++++++ 2 files changed, 139 insertions(+), 78 deletions(-) delete mode 100644 Documentation/devicetree/bindings/thermal/rcar-thermal.txt create mode 100644 Documentation/devicetree/bindings/thermal/rcar-thermal.yaml