[GIT,PULL] power-supply changes for 5.8

Hi Linus, Here is the power-supply pull request. As mentioned in my pull request for 5.7, this time there are lots of changes. Quite a few changes to the core, lots of driver changes and one change to kobject core (with Ack from Greg). Please find the details in the signed tag (or below). No merge conflicts have been reported from linux-next. -- Sebastian The following changes since commit 0e698dfa282211e414076f9dc7e83c1c288314fd: Linux 5.7-rc4 (2020-05-03 14:56:04 -0700) are available in the Git repository at: ssh://git@gitolite.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply.git tags/for-v5.8 for you to fetch changes up to 152204dbdcee6df9406f87c81f9591aeaf1ba55b: power: supply: cw2015: Attach OF ID table to the driver (2020-06-06 01:13:56 +0200) ---------------------------------------------------------------- power supply and reset changes for the v5.8 series kobject: * Increase number of allowed uevent variables power-supply core: * Add power-supply type in uevent * Cleanup property handling in core * Make property and usb_type pointers const * Convert core power-supply DT binding to YAML * Cleanup HWMON code * Add new health status "calibration required" * Add new properties for manufacture date and capacity error margin battery drivers: * new cw2015 battery driver used by pine64 Pinebook Pro laptop * axp22: blacklist on Meegopad T02 * sc27xx: support current/voltage reading * max17042: support time-to-empty reading * simple-battery: add more battery parameters * bq27xxx: convert DT binding document to YAML * sbs-battery: add TI BQ20Z65 support, fix technology property, convert DT binding to YAML, add option to disable charger broadcasts, add new properties: manufacture date, capacity error margin, average current, charge current and voltage and support calibration required health status * misc. fixes charger drivers: * bq25890: cleanup, implement charge type, precharge current and input current limiting properties * bd70528: use new linear range helper library * bd99954: new charger driver * mp2629: new charger driver * misc. fixes reboot drivers: * oxnas-restart: introduce new driver * syscon-reboot: convert DT binding to YAML, add parent syscon device support * misc. fixes ---------------------------------------------------------------- Andy Shevchenko (1): power: supply: cw2015: Attach OF ID table to the driver ChenTao (1): power: supply: cw2015: Make some symbols static Christophe JAILLET (1): power: supply: lp8788: Fix an error handling path in 'lp8788_charger_probe()' Dan Carpenter (1): power: bq25890: unlock on error paths in bq25890_resume() Dan Murphy (2): dt-bindings: power: Convert power_supply text to yaml dt-bindings: power: Convert bq27xxx dt to yaml Daniel Golle (1): power: reset: introduce oxnas-restart David Heidelberg (1): power: supply: smb347-charger: Add delay before getting IRQSTAT Dmitry Osipenko (1): power: supply: smb347-charger: IRQSTAT_D is volatile Enric Balletbo i Serra (1): power: supply: bq24257_charger: Replace depends on REGMAP_I2C with select Geordan Neukum (1): power: supply: max17042_battery: Add support for the TTE_NOW prop Hongbo Yao (1): power: reset: ltc2952: remove unused variable Jason Yan (2): power: supply: max14656: remove set but not used 'ret' power: supply: ab8500_fg: remove comparison to bool Jean-Francois Dagenais (1): power: supply: sbs-battery: add ability to disable charger broadcasts Jonathan Bakker (1): power: supply: max17040: Correct voltage reading Kejia Hu (1): power: reset: qcom-pon: reg write mask depends on pon generation Lubomir Rintel (1): power: supply: olpc_battery: fix the power supply name Luca Ceresoli (1): power: reset: gpio-poweroff: add missing ' ' in dev_err() Marek Szyprowski (1): power: charger: max14577: Add proper dt-compatible strings Mathew King (4): power: supply: core: Cleanup power supply sysfs attribute list power: supply: core: Use designated initializer for property text arrays power: supply: core: Add a macro that maps enum properties to text values power: supply: core: Add type property to uevent env Matti Vaittinen (11): lib: add linear ranges helpers lib/test_linear_ranges: add a test for the 'linear_ranges' power: supply: bd70528: rename linear_range to avoid collision regulator: use linear_ranges helper power: supply: bd70528: use linear ranges dt-bindings: battery: add new battery parameters power: supply: add battery parameters dt_bindings: ROHM BD99954 Charger power: supply: Support ROHM bd99954 charger power: supply: Fix Kconfig help text indentiation power: supply: KConfig cleanup default n Michał Mirosław (16): power: supply: core: reduce power_supply_show_usb_type() parameters power: supply: core: allow to constify property lists power: supply: core: fix HWMON temperature labels power: supply: core: hide unused HWMON labels power: charger-manager: clarify num_properties starting value power: supply: core: tabularize HWMON temperature labels power: bq25890: simplify chip name property getter power: bq25890: make property table const power: bq25890: remove redundant I2C bus check power: bq25890: protect view of the chip's state power: bq25890: use proper CURRENT_NOW property for I_BAT power: bq25890: fix ADC mode configuration power: bq25890: update state on property read power: bq25890: implement CHARGE_TYPE property power: bq25890: implement PRECHARGE_CURRENT property power: bq25890: implement INPUT_CURRENT_LIMIT property Qiushi Wu (1): power: supply: core: fix memory leak in HWMON error path Rafael Gandolfi (1): power: supply: axp288_fuel_gauge: Add the Meegopad T02 to the blacklist. Samuel Zou (1): power: supply: Make bd9995x_chip_reset static Saravanan Sekar (6): dt-bindings: mfd: Add document bindings for mp2629 mfd: mp2629: Add support for mps battery charger iio: adc: mp2629: Add support for mp2629 ADC driver power: supply: Add support for mps mp2629 battery charger power: supply: mp2629: Add impedance compensation config MAINTAINERS: Add entry for mp2629 Battery Charger driver Sebastian Reichel (24): power: supply: charger-manager: Prepare for const properties power: supply: generic-adc-battery: Prepare for const properties Merge tag 'tags/linear-ranges-lib' into psy-next Merge tag 'tags/ib-mfd-iio-power-v5.8' into psy-next kobject: increase allowed number of uevent variables power: supply: core: add capacity error margin property power: supply: core: add manufacture date properties power: supply: core: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED power: supply: sbs-battery: Add TI BQ20Z65 support power: supply: sbs-battery: add POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN support power: supply: sbs-battery: simplify read_read_string_data power: supply: sbs-battery: add PEC support power: supply: sbs-battery: add POWER_SUPPLY_PROP_CURRENT_AVG support power: supply: sbs-battery: Improve POWER_SUPPLY_PROP_TECHNOLOGY support power: supply: sbs-battery: add POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT/VOLTAGE_MAX support power: supply: sbs-battery: add MANUFACTURE_DATE support power: supply: sbs-battery: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED support power: supply: sbs-battery: fix idle battery status power: supply: sbs-battery: switch from of_property_* to device_property_* power: supply: sbs-battery: switch to i2c's probe_new power: supply: sbs-battery: constify power-supply property array dt-bindings: power: sbs-battery: Convert to yaml Revert "power: supply: sbs-battery: add PEC support" Revert "power: supply: sbs-battery: simplify read_read_string_data" Serge Semin (3): dt-bindings: power: reset: Convert syscon-reboot-mode to DT schema dt-bindings: power: reset: Unrequire regmap property in syscon-reboot node power: reset: syscon-reboot: Add parental syscon support Tang Bin (2): power: supply: 88pm860x_battery: remove redundant dev_err message power: supply: axp288_charger: Omit superfluous error message Tobias Schramm (3): dt-bindings: Document cellwise vendor-prefix dt-bindings: power: supply: add cw2015_battery bindings power: supply: add CellWise cw2015 fuel gauge driver Wolfram Sang (1): power: supply: bq24190_charger: convert to use i2c_new_client_device() Yuanjiang Yu (4): power: supply: sc27xx: Set 'no_thermal' flag for SC27xx fuel gauge power: supply: sc27xx: Allow to change the battery full capacity power: supply: sc27xx: Add CURRENT_NOW/VOLTAGE_NOW properties support power: supply: sc27xx: Add boot voltage support Documentation/ABI/testing/sysfs-class-power | 45 +- Documentation/ABI/testing/sysfs-class-power-mp2629 | 8 + .../devicetree/bindings/mfd/mps,mp2629.yaml | 62 ++ .../bindings/power/reset/syscon-reboot-mode.txt | 35 - .../bindings/power/reset/syscon-reboot-mode.yaml | 55 + .../bindings/power/reset/syscon-reboot.yaml | 15 +- .../devicetree/bindings/power/supply/battery.txt | 6 + .../devicetree/bindings/power/supply/bq27xxx.txt | 56 - .../devicetree/bindings/power/supply/bq27xxx.yaml | 91 ++ .../bindings/power/supply/cw2015_battery.yaml | 82 ++ .../bindings/power/supply/power-supply.yaml | 40 + .../bindings/power/supply/power_supply.txt | 25 +- .../bindings/power/supply/rohm,bd99954.yaml | 155 +++ .../bindings/power/supply/sbs,sbs-battery.yaml | 83 ++ .../bindings/power/supply/sbs_sbs-battery.txt | 27 - .../devicetree/bindings/vendor-prefixes.yaml | 2 + MAINTAINERS | 12 + arch/x86/platform/olpc/olpc-xo1-sci.c | 4 +- arch/x86/platform/olpc/olpc-xo15-sci.c | 4 +- drivers/iio/adc/Kconfig | 10 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/mp2629_adc.c | 208 ++++ drivers/mfd/Kconfig | 9 + drivers/mfd/Makefile | 2 + drivers/mfd/mp2629.c | 79 ++ drivers/platform/olpc/olpc-xo175-ec.c | 4 +- drivers/power/reset/Kconfig | 7 + drivers/power/reset/Makefile | 1 + drivers/power/reset/gpio-poweroff.c | 2 +- drivers/power/reset/ltc2952-poweroff.c | 3 +- drivers/power/reset/oxnas-restart.c | 233 ++++ drivers/power/reset/qcom-pon.c | 3 +- drivers/power/reset/syscon-reboot.c | 7 +- drivers/power/supply/88pm860x_battery.c | 8 +- drivers/power/supply/Kconfig | 59 +- drivers/power/supply/Makefile | 3 + drivers/power/supply/ab8500_fg.c | 2 +- drivers/power/supply/axp288_charger.c | 5 +- drivers/power/supply/axp288_fuel_gauge.c | 6 + drivers/power/supply/bd70528-charger.c | 140 +-- drivers/power/supply/bd99954-charger.c | 1142 ++++++++++++++++++++ drivers/power/supply/bd99954-charger.h | 1075 ++++++++++++++++++ drivers/power/supply/bq24190_charger.c | 2 +- drivers/power/supply/bq25890_charger.c | 200 ++-- drivers/power/supply/charger-manager.c | 40 +- drivers/power/supply/cw2015_battery.c | 750 +++++++++++++ drivers/power/supply/generic-adc-battery.c | 22 +- drivers/power/supply/lp8788-charger.c | 18 +- drivers/power/supply/max14577_charger.c | 10 + drivers/power/supply/max14656_charger_detector.c | 5 +- drivers/power/supply/max17040_battery.c | 2 +- drivers/power/supply/max17042_battery.c | 8 + drivers/power/supply/mp2629_charger.c | 669 ++++++++++++ drivers/power/supply/olpc_battery.c | 4 +- drivers/power/supply/power_supply_core.c | 8 + drivers/power/supply/power_supply_hwmon.c | 64 +- drivers/power/supply/power_supply_sysfs.c | 484 +++++---- drivers/power/supply/sbs-battery.c | 232 +++- drivers/power/supply/sc27xx_fuel_gauge.c | 77 +- drivers/power/supply/smb347-charger.c | 5 + drivers/regulator/88pg86x.c | 4 +- drivers/regulator/88pm800-regulator.c | 4 +- drivers/regulator/Kconfig | 1 + drivers/regulator/act8865-regulator.c | 4 +- drivers/regulator/act8945a-regulator.c | 2 +- drivers/regulator/arizona-ldo1.c | 2 +- drivers/regulator/arizona-micsupp.c | 4 +- drivers/regulator/as3711-regulator.c | 6 +- drivers/regulator/as3722-regulator.c | 4 +- drivers/regulator/axp20x-regulator.c | 16 +- drivers/regulator/bcm590xx-regulator.c | 8 +- drivers/regulator/bd70528-regulator.c | 8 +- drivers/regulator/bd71828-regulator.c | 10 +- drivers/regulator/bd718x7-regulator.c | 26 +- drivers/regulator/da903x.c | 2 +- drivers/regulator/helpers.c | 130 +-- drivers/regulator/hi6421-regulator.c | 4 +- drivers/regulator/lochnagar-regulator.c | 4 +- drivers/regulator/lp873x-regulator.c | 4 +- drivers/regulator/lp87565-regulator.c | 2 +- drivers/regulator/lp8788-buck.c | 2 +- drivers/regulator/max77650-regulator.c | 2 +- drivers/regulator/mcp16502.c | 4 +- drivers/regulator/mp8859.c | 2 +- drivers/regulator/mt6323-regulator.c | 6 +- drivers/regulator/mt6358-regulator.c | 8 +- drivers/regulator/mt6380-regulator.c | 6 +- drivers/regulator/mt6397-regulator.c | 6 +- drivers/regulator/palmas-regulator.c | 4 +- drivers/regulator/qcom-rpmh-regulator.c | 2 +- drivers/regulator/qcom_rpm-regulator.c | 14 +- drivers/regulator/qcom_smd-regulator.c | 78 +- drivers/regulator/rk808-regulator.c | 10 +- drivers/regulator/s2mps11.c | 14 +- drivers/regulator/sky81452-regulator.c | 2 +- drivers/regulator/stpmic1_regulator.c | 18 +- drivers/regulator/tps65086-regulator.c | 10 +- drivers/regulator/tps65217-regulator.c | 4 +- drivers/regulator/tps65218-regulator.c | 6 +- drivers/regulator/tps65912-regulator.c | 4 +- drivers/regulator/twl-regulator.c | 4 +- drivers/regulator/twl6030-regulator.c | 2 +- drivers/regulator/wm831x-dcdc.c | 2 +- drivers/regulator/wm831x-ldo.c | 4 +- drivers/regulator/wm8350-regulator.c | 2 +- drivers/regulator/wm8400-regulator.c | 2 +- include/linux/kobject.h | 2 +- include/linux/linear_range.h | 48 + include/linux/mfd/mp2629.h | 26 + include/linux/power_supply.h | 13 +- include/linux/regulator/driver.h | 27 +- lib/Kconfig | 3 + lib/Kconfig.debug | 12 + lib/Makefile | 2 + lib/linear_ranges.c | 241 +++++ lib/test_linear_ranges.c | 228 ++++ 116 files changed, 6544 insertions(+), 937 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-class-power-mp2629 create mode 100644 Documentation/devicetree/bindings/mfd/mps,mp2629.yaml delete mode 100644 Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.txt create mode 100644 Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml delete mode 100644 Documentation/devicetree/bindings/power/supply/bq27xxx.txt create mode 100644 Documentation/devicetree/bindings/power/supply/bq27xxx.yaml create mode 100644 Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml create mode 100644 Documentation/devicetree/bindings/power/supply/power-supply.yaml create mode 100644 Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml create mode 100644 Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml delete mode 100644 Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt create mode 100644 drivers/iio/adc/mp2629_adc.c create mode 100644 drivers/mfd/mp2629.c create mode 100644 drivers/power/reset/oxnas-restart.c create mode 100644 drivers/power/supply/bd99954-charger.c create mode 100644 drivers/power/supply/bd99954-charger.h create mode 100644 drivers/power/supply/cw2015_battery.c create mode 100644 drivers/power/supply/mp2629_charger.c create mode 100644 include/linux/linear_range.h create mode 100644 include/linux/mfd/mp2629.h create mode 100644 lib/linear_ranges.c create mode 100644 lib/test_linear_ranges.c

Message ID	20200609153756.rdkntdy4i6zgcpbu@earth.universe (mailing list archive)
State	Not Applicable, archived
Headers	show Return-Path: <SRS0=539E=7W=vger.kernel.org=linux-pm-owner@kernel.org> Date: Tue, 9 Jun 2020 17:37:56 +0200 From: Sebastian Reichel <sre@kernel.org> To: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org Subject: [GIT PULL] power-supply changes for 5.8 Message-ID: <20200609153756.rdkntdy4i6zgcpbu@earth.universe> MIME-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha512; protocol="application/pgp-signature"; boundary="c5hwyhkxeduuwcww" Content-Disposition: inline Sender: linux-pm-owner@vger.kernel.org Precedence: bulk
Series	[GIT,PULL] power-supply changes for 5.8 \| expand [GIT,PULL] power-supply changes for 5.8

[GIT,PULL] power-supply changes for 5.8

Pull-request

Message

Comments