From patchwork Thu Jul 23 13:09:42 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Georgi Djakov X-Patchwork-Id: 11680973 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 13D33138A for ; Thu, 23 Jul 2020 13:09:59 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id DCCE322BEA for ; Thu, 23 Jul 2020 13:09:58 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="vviuEPQm" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729053AbgGWNJz (ORCPT ); Thu, 23 Jul 2020 09:09:55 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:36962 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729049AbgGWNJx (ORCPT ); Thu, 23 Jul 2020 09:09:53 -0400 Received: from mail-wr1-x443.google.com (mail-wr1-x443.google.com [IPv6:2a00:1450:4864:20::443]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 2582FC0619DC for ; Thu, 23 Jul 2020 06:09:52 -0700 (PDT) Received: by mail-wr1-x443.google.com with SMTP id b6so5092609wrs.11 for ; Thu, 23 Jul 2020 06:09:52 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=n+YRVEMhnbtayqfrSyBvmCm5bK/RwwiScDdw5E9JYC4=; b=vviuEPQmcvhQqv1Z0x0GJ9ykx0dLrTanjL3H1DFreVW2ToWT3rgBB5PpVyO8u+YrH9 KfbHY6nhjnsbTXvXLYXWVmxquDJRNkayAp5yzGmzdOrVxoktL+eLbvQrFFawxqxGXSRr gF+oKSnTHu8CeKPh9b4Qlg1zqCY30cqain6+moI13gihSzzI5hSyOQRgvi53W+w0/WpS U2+n72vXb0Vaw7g4GkgelfEun7do1s5VWCjvsRh9t6d4jIVvYdreuZEnz1HkH+nY6Tpv WHMqtVwiTHX/plNh1WQHayzhiR7i4LbkoknVrDOlsO7/yg/0zVDIOnM7QWg8NL1LXcHm mNDQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=n+YRVEMhnbtayqfrSyBvmCm5bK/RwwiScDdw5E9JYC4=; b=LDF9ELCPOki8bXPXCJIE3+IWWhVzgGw1wpvtCNFMnbdAs50nyLPfWWFtf1eYKErbjB I/2STSXCJnNHrYsKnnQtGATyX4caH707llruuy6yLOguTMGGurdN5oWN/iDMSJasoxmf mhummDMCd50tmIjJZL/p+9evPChDH74nooLY9+awM3+ZQwTiTV93PJf6a1LwzZZzTpIO YQHMjhWXkDV39XoKToOJ07eKpDKe+0pUHbF3jIeds5Md5wvToGAYJoiwEsPAisMGjrF8 ZmpaoCLcVn6BDJPHgS98ZaIS7yI1ns7zCw9IN4GlgJc34aAKPsNlISngGik3KRmIrZVf RocQ== X-Gm-Message-State: AOAM531/WrO2rHEAES0wgPwPuS8rN01T2xaeB6K+YwtCSNB0gJPUmwi/ mBeDUQ1qRL8sRWxmO44qZp20rm0aRG8= X-Google-Smtp-Source: ABdhPJwnVaJNJ5YE1Z+K7EJmo6WoWQmnILaUidasCk7/aniLjVKwMYiCIOjtiU6ZZuHbkaHi9S1mMg== X-Received: by 2002:adf:9bdd:: with SMTP id e29mr4334632wrc.394.1595509790015; Thu, 23 Jul 2020 06:09:50 -0700 (PDT) Received: from localhost.localdomain ([212.45.67.2]) by smtp.googlemail.com with ESMTPSA id w7sm3594632wmc.32.2020.07.23.06.09.48 (version=TLS1_2 cipher=ECDHE-ECDSA-AES128-GCM-SHA256 bits=128/128); Thu, 23 Jul 2020 06:09:49 -0700 (PDT) From: Georgi Djakov To: linux-pm@vger.kernel.org, devicetree@vger.kernel.org Cc: bjorn.andersson@linaro.org, robh+dt@kernel.org, sibis@codeaurora.org, mka@chromium.org, dianders@chromium.org, georgi.djakov@linaro.org, linux-kernel@vger.kernel.org Subject: [PATCH 6/6] arm64: dts: qcom: sc7180: Increase the number of interconnect cells Date: Thu, 23 Jul 2020 16:09:42 +0300 Message-Id: <20200723130942.28491-7-georgi.djakov@linaro.org> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20200723130942.28491-1-georgi.djakov@linaro.org> References: <20200723130942.28491-1-georgi.djakov@linaro.org> MIME-Version: 1.0 Sender: linux-pm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org From: Sibi Sankar Increase the number of interconnect-cells, as now we can include the tag information. The consumers can specify the path tag as an additional argument to the endpoints. Signed-off-by: Sibi Sankar Signed-off-by: Georgi Djakov Tested-by: Matthias Kaehlcke Reviewed-by: Matthias Kaehlcke --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 216 +++++++++++++-------------- 1 file changed, 108 insertions(+), 108 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 16df08d9ef8f..fe80e1b8acee 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -132,7 +132,7 @@ &LITTLE_CPU_SLEEP_1 capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; next-level-cache = <&L2_0>; #cooling-cells = <2>; @@ -158,7 +158,7 @@ &LITTLE_CPU_SLEEP_1 dynamic-power-coefficient = <100>; next-level-cache = <&L2_100>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -180,7 +180,7 @@ &LITTLE_CPU_SLEEP_1 dynamic-power-coefficient = <100>; next-level-cache = <&L2_200>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -202,7 +202,7 @@ &LITTLE_CPU_SLEEP_1 dynamic-power-coefficient = <100>; next-level-cache = <&L2_300>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -224,7 +224,7 @@ &LITTLE_CPU_SLEEP_1 dynamic-power-coefficient = <100>; next-level-cache = <&L2_400>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -246,7 +246,7 @@ &LITTLE_CPU_SLEEP_1 dynamic-power-coefficient = <100>; next-level-cache = <&L2_500>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -268,7 +268,7 @@ &BIG_CPU_SLEEP_1 dynamic-power-coefficient = <405>; next-level-cache = <&L2_600>; operating-points-v2 = <&cpu6_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -290,7 +290,7 @@ &BIG_CPU_SLEEP_1 dynamic-power-coefficient = <405>; next-level-cache = <&L2_700>; operating-points-v2 = <&cpu6_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -742,7 +742,7 @@ qupv3_id_0: geniqup@8c0000 { #size-cells = <2>; ranges; iommus = <&apps_smmu 0x43 0x0>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>; interconnect-names = "qup-core"; status = "disabled"; @@ -756,9 +756,9 @@ i2c0: i2c@880000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, - <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -776,8 +776,8 @@ spi0: spi@880000 { #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -792,8 +792,8 @@ uart0: serial@880000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -808,9 +808,9 @@ i2c1: i2c@884000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, - <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -828,8 +828,8 @@ spi1: spi@884000 { #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -844,8 +844,8 @@ uart1: serial@884000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -860,9 +860,9 @@ i2c2: i2c@888000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, - <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -878,8 +878,8 @@ uart2: serial@888000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -894,9 +894,9 @@ i2c3: i2c@88c000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, - <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -914,8 +914,8 @@ spi3: spi@88c000 { #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -930,8 +930,8 @@ uart3: serial@88c000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -946,9 +946,9 @@ i2c4: i2c@890000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, - <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -964,8 +964,8 @@ uart4: serial@890000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -980,9 +980,9 @@ i2c5: i2c@894000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, - <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -1000,8 +1000,8 @@ spi5: spi@894000 { #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1016,8 +1016,8 @@ uart5: serial@894000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1033,7 +1033,7 @@ qupv3_id_1: geniqup@ac0000 { #size-cells = <2>; ranges; iommus = <&apps_smmu 0x4c3 0x0>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>; interconnect-names = "qup-core"; status = "disabled"; @@ -1047,9 +1047,9 @@ i2c6: i2c@a80000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, - <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -1067,8 +1067,8 @@ spi6: spi@a80000 { #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1083,8 +1083,8 @@ uart6: serial@a80000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1099,9 +1099,9 @@ i2c7: i2c@a84000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, - <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -1117,8 +1117,8 @@ uart7: serial@a84000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1133,9 +1133,9 @@ i2c8: i2c@a88000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, - <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -1153,8 +1153,8 @@ spi8: spi@a88000 { #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1169,8 +1169,8 @@ uart8: serial@a88000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1185,9 +1185,9 @@ i2c9: i2c@a8c000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, - <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -1203,8 +1203,8 @@ uart9: serial@a8c000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1219,9 +1219,9 @@ i2c10: i2c@a90000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, - <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -1239,8 +1239,8 @@ spi10: spi@a90000 { #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1255,8 +1255,8 @@ uart10: serial@a90000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1271,9 +1271,9 @@ i2c11: i2c@a94000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, - <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -1291,8 +1291,8 @@ spi11: spi@a94000 { #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1307,8 +1307,8 @@ uart11: serial@a94000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1317,63 +1317,63 @@ uart11: serial@a94000 { config_noc: interconnect@1500000 { compatible = "qcom,sc7180-config-noc"; reg = <0 0x01500000 0 0x28000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; system_noc: interconnect@1620000 { compatible = "qcom,sc7180-system-noc"; reg = <0 0x01620000 0 0x17080>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; mc_virt: interconnect@1638000 { compatible = "qcom,sc7180-mc-virt"; reg = <0 0x01638000 0 0x1000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; qup_virt: interconnect@1650000 { compatible = "qcom,sc7180-qup-virt"; reg = <0 0x01650000 0 0x1000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre1_noc: interconnect@16e0000 { compatible = "qcom,sc7180-aggre1-noc"; reg = <0 0x016e0000 0 0x15080>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre2_noc: interconnect@1705000 { compatible = "qcom,sc7180-aggre2-noc"; reg = <0 0x01705000 0 0x9000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; compute_noc: interconnect@170e000 { compatible = "qcom,sc7180-compute-noc"; reg = <0 0x0170e000 0 0x6000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; mmss_noc: interconnect@1740000 { compatible = "qcom,sc7180-mmss-noc"; reg = <0 0x01740000 0 0x1c100>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; ipa_virt: interconnect@1e00000 { compatible = "qcom,sc7180-ipa-virt"; reg = <0 0x01e00000 0 0x1000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -1400,9 +1400,9 @@ ipa: ipa@1e40000 { clocks = <&rpmhcc RPMH_IPA_CLK>; clock-names = "core"; - interconnects = <&aggre2_noc MASTER_IPA &mc_virt SLAVE_EBI1>, - <&aggre2_noc MASTER_IPA &system_noc SLAVE_IMEM>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>; + interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>, + <&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>; interconnect-names = "memory", "imem", "config"; @@ -2526,8 +2526,8 @@ qspi: spi@88dc000 { clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, <&gcc GCC_QSPI_CORE_CLK>; clock-names = "iface", "core"; - interconnects = <&gem_noc MASTER_APPSS_PROC - &config_noc SLAVE_QSPI_0>; + interconnects = <&gem_noc MASTER_APPSS_PROC 0 + &config_noc SLAVE_QSPI_0 0>; interconnect-names = "qspi-config"; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qspi_opp_table>; @@ -2586,7 +2586,7 @@ usb_1_ssphy: phy@88e9200 { dc_noc: interconnect@9160000 { compatible = "qcom,sc7180-dc-noc"; reg = <0 0x09160000 0 0x03200>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -2600,14 +2600,14 @@ system-cache-controller@9200000 { gem_noc: interconnect@9680000 { compatible = "qcom,sc7180-gem-noc"; reg = <0 0x09680000 0 0x3e200>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; npu_noc: interconnect@9990000 { compatible = "qcom,sc7180-npu-noc"; reg = <0 0x09990000 0 0x1600>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -2643,8 +2643,8 @@ usb_1: usb@a6f8800 { resets = <&gcc GCC_USB30_PRIM_BCR>; - interconnects = <&aggre2_noc MASTER_USB3 &mc_virt SLAVE_EBI1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_USB3>; + interconnects = <&aggre2_noc MASTER_USB3 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>; interconnect-names = "usb-ddr", "apps-usb"; usb_1_dwc3: dwc3@a600000 { @@ -2675,8 +2675,8 @@ venus: video-codec@aa00000 { "vcodec0_core", "vcodec0_bus"; iommus = <&apps_smmu 0x0c00 0x60>; memory-region = <&venus_mem>; - interconnects = <&mmss_noc MASTER_VIDEO_P0 &mc_virt SLAVE_EBI1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_VENUS_CFG>; + interconnects = <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>; interconnect-names = "video-mem", "cpu-cfg"; video-decoder { @@ -2701,7 +2701,7 @@ videocc: clock-controller@ab00000 { camnoc_virt: interconnect@ac00000 { compatible = "qcom,sc7180-camnoc-virt"; reg = <0 0x0ac00000 0 0x1000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; };