From patchwork Thu Nov 5 13:52:11 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Georgi Djakov X-Patchwork-Id: 11884449 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 2F41516C1 for ; Thu, 5 Nov 2020 13:52:17 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id EDAB422268 for ; Thu, 5 Nov 2020 13:52:16 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="T25OkuUQ" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730466AbgKENwQ (ORCPT ); Thu, 5 Nov 2020 08:52:16 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:38592 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1730461AbgKENwP (ORCPT ); Thu, 5 Nov 2020 08:52:15 -0500 Received: from mail-wr1-x444.google.com (mail-wr1-x444.google.com [IPv6:2a00:1450:4864:20::444]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id AEACEC0613D3 for ; Thu, 5 Nov 2020 05:52:14 -0800 (PST) Received: by mail-wr1-x444.google.com with SMTP id b8so1865563wrn.0 for ; Thu, 05 Nov 2020 05:52:14 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=3y3h8Gt2B3dQV3uiCceEQJtTal2gmWJav/I0Vj+GOyU=; b=T25OkuUQXDWnngtej/+9ragOdTSWZdRg8+VnVRzO8J9CMxdJQRU2S2L2EpTfD5eyxo RMmVa35GY1K4ilU0FQiNMd1hs0CCVCKg1O12tX5cevu654FOwqI2vn8vlSNj6RDg8nX6 xGcwQNwhFXrDH6oy39zN1kOYELMUcIAzAoKqd2RAxF8mbS1EuU1tCTc+QO5AqrFI7C6j PlZerPoMdwkDLm9GZIV40/kwt+3ekNDKdFGfLAACyoVNISDlGeYNHJtaAfe0vKRb+wvF QXLCqSQ7VOUJesPd5YDlDZvPtNDJnCyHKO9bDMQFS6ugQdrQqxUczCidGWLYNtEd+6dp mx4g== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=3y3h8Gt2B3dQV3uiCceEQJtTal2gmWJav/I0Vj+GOyU=; b=XHPlmzd78cZG33SrPqsOURfXwZ36SOGRLIHLq7egz0zxLjttQ1J6L0XpfX40GjMeN1 it79qu/0J4h1Vl5TFBjRaAIwaz1NP9vvr/bWaXbcEKYlKa5L/i6gxmlLm2HRXhV4NdKh U6+oaSlqJtWSgqjfFRoBb7eJBTv7uZ9klTJUw6jqOcJeWpBK499vst20NemMWzFy5y6u VPph4E9bTCIyOZAgESpUNOD3ea/yOJ3m9EDoYUUNX7MEkLvBgG/W5Qww4C53cDDuM088 WIONlAayYOrP0Wgt+9DqeD8S/njr5/gJCNQdP3pmf6aCqsAYCe/Db0y2FAmrVOE3E+5w A6CQ== X-Gm-Message-State: AOAM532h1/rudBtOeMQg5iFMVii2UNIFmYU8GEvKfmHcpKBzGI2uKp+5 aLmhZ9pn7O/RUPaD0F3Lu/Mh7ldwYW07mA== X-Google-Smtp-Source: ABdhPJz7/5ii7HK5bMoAedQL1YRUoj6Okm1V4pgzv17MB4XJKIgWAqVCA3hJO4rrgBuiUa0w9UrzLg== X-Received: by 2002:a5d:4bd1:: with SMTP id l17mr3305932wrt.38.1604584332989; Thu, 05 Nov 2020 05:52:12 -0800 (PST) Received: from localhost.localdomain ([212.45.67.2]) by smtp.googlemail.com with ESMTPSA id h4sm2648541wrq.3.2020.11.05.05.52.11 (version=TLS1_2 cipher=ECDHE-ECDSA-AES128-GCM-SHA256 bits=128/128); Thu, 05 Nov 2020 05:52:12 -0800 (PST) From: Georgi Djakov To: linux-pm@vger.kernel.org, bjorn.andersson@linaro.org, mdtipton@codeaurora.org Cc: devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org, akashast@codeaurora.org, georgi.djakov@linaro.org Subject: [PATCH 3/3] arm64: dts: sdm845: Add interconnect properties for QUP Date: Thu, 5 Nov 2020 15:52:11 +0200 Message-Id: <20201105135211.7160-3-georgi.djakov@linaro.org> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20201105135211.7160-1-georgi.djakov@linaro.org> References: <20201105135211.7160-1-georgi.djakov@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org Add the interconnects DT property to describe the ports for GENI QUPs on the sdm845 platform. Signed-off-by: Georgi Djakov --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 160 +++++++++++++++++++++++++++ 1 file changed, 160 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index aca7e9c954e0..14e74ba889c3 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -1123,6 +1123,8 @@ qupv3_id_0: geniqup@8c0000 { #address-cells = <2>; #size-cells = <2>; ranges; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core"; status = "disabled"; i2c0: i2c@880000 { @@ -1137,6 +1139,10 @@ i2c0: i2c@880000 { #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1150,6 +1156,9 @@ spi0: spi@880000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1163,6 +1172,9 @@ uart0: serial@880000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1178,6 +1190,10 @@ i2c1: i2c@884000 { #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1191,6 +1207,9 @@ spi1: spi@884000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1204,6 +1223,9 @@ uart1: serial@884000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1219,6 +1241,10 @@ i2c2: i2c@888000 { #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1232,6 +1258,9 @@ spi2: spi@888000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1245,6 +1274,9 @@ uart2: serial@888000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1260,6 +1292,10 @@ i2c3: i2c@88c000 { #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1273,6 +1309,9 @@ spi3: spi@88c000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1286,6 +1325,9 @@ uart3: serial@88c000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1301,6 +1343,10 @@ i2c4: i2c@890000 { #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1314,6 +1360,9 @@ spi4: spi@890000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1327,6 +1376,9 @@ uart4: serial@890000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1342,6 +1394,10 @@ i2c5: i2c@894000 { #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1355,6 +1411,9 @@ spi5: spi@894000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1368,6 +1427,9 @@ uart5: serial@894000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1383,6 +1445,10 @@ i2c6: i2c@898000 { #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1396,6 +1462,9 @@ spi6: spi@898000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1409,6 +1478,9 @@ uart6: serial@898000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1437,6 +1509,9 @@ spi7: spi@89c000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1450,6 +1525,9 @@ uart7: serial@89c000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; }; @@ -1463,6 +1541,8 @@ qupv3_id_1: geniqup@ac0000 { #address-cells = <2>; #size-cells = <2>; ranges; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core"; status = "disabled"; i2c8: i2c@a80000 { @@ -1477,6 +1557,10 @@ i2c8: i2c@a80000 { #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1490,6 +1574,9 @@ spi8: spi@a80000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1503,6 +1590,9 @@ uart8: serial@a80000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1518,6 +1608,10 @@ i2c9: i2c@a84000 { #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1531,6 +1625,9 @@ spi9: spi@a84000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1544,6 +1641,9 @@ uart9: serial@a84000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1559,6 +1659,10 @@ i2c10: i2c@a88000 { #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1572,6 +1676,9 @@ spi10: spi@a88000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1585,6 +1692,9 @@ uart10: serial@a88000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1600,6 +1710,10 @@ i2c11: i2c@a8c000 { #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1613,6 +1727,9 @@ spi11: spi@a8c000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1626,6 +1743,9 @@ uart11: serial@a8c000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1641,6 +1761,10 @@ i2c12: i2c@a90000 { #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1654,6 +1778,9 @@ spi12: spi@a90000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1667,6 +1794,9 @@ uart12: serial@a90000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1682,6 +1812,10 @@ i2c13: i2c@a94000 { #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1695,6 +1829,9 @@ spi13: spi@a94000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1708,6 +1845,9 @@ uart13: serial@a94000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1723,6 +1863,10 @@ i2c14: i2c@a98000 { #size-cells = <0>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -1736,6 +1880,9 @@ spi14: spi@a98000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1749,6 +1896,9 @@ uart14: serial@a98000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1765,6 +1915,10 @@ i2c15: i2c@a9c000 { power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; status = "disabled"; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; }; spi15: spi@a9c000 { @@ -1777,6 +1931,9 @@ spi15: spi@a9c000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1790,6 +1947,9 @@ uart15: serial@a9c000 { interrupts = ; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; };