diff mbox series

[17/41] arm64: dts: qcom: sdm630: Add thermal-zones configuration

Message ID 20210226200414.167762-18-konrad.dybcio@somainline.org (mailing list archive)
State Not Applicable, archived
Headers show
Series SDM630/636/660/Nile&Ganges DT feature enablement | expand

Commit Message

Konrad Dybcio Feb. 26, 2021, 8:03 p.m. UTC
Add a basic thermal-zones configuration to make sure the SoC
doesn't overheat itself to death.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 arch/arm64/boot/dts/qcom/sdm630.dtsi | 173 +++++++++++++++++++++++++++
 1 file changed, 173 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index ffc18d0dee9e..08e499229396 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -521,6 +521,179 @@  modem_smp2p_in: slave-kernel {
 		};
 	};
 
+	thermal-zones {
+		aoss-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				aoss_alert0: trip-point0 {
+					temperature = <105000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				cpuss0_alert0: trip-point0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				cpuss1_alert0: trip-point0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		/*
+		 * According to what downstream DTS says,
+		 * the entire power efficient cluster has
+		 * only a single thermal sensor.
+		 */
+
+		pwr-cluster-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				pwr_cluster_alert0: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				pwr_cluster_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				gpu_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;