deleted file mode 100644
@@ -1,91 +0,0 @@
-charger-manager bindings
-~~~~~~~~~~~~~~~~~~~~~~~~
-
-Required properties :
- - compatible : "charger-manager"
- - <>-supply : for regulator consumer, named according to cm-regulator-name
- - cm-chargers : name of chargers
- - cm-fuel-gauge : name of battery fuel gauge
- - subnode <regulator> :
- - cm-regulator-name : name of charger regulator
- - subnode <cable> :
- - cm-cable-name : name of charger cable - one of USB, USB-HOST,
- SDP, DCP, CDP, ACA, FAST-CHARGER, SLOW-CHARGER, WPT,
- PD, DOCK, JIG, or MECHANICAL
- - cm-cable-extcon : name of extcon dev
-(optional) - cm-cable-min : minimum current of cable
-(optional) - cm-cable-max : maximum current of cable
-
-Optional properties :
- - cm-name : charger manager's name (default : "battery")
- - cm-poll-mode : polling mode - 0 for disabled, 1 for always, 2 for when
- external power is connected, or 3 for when charging. If not present,
- then polling is disabled
- - cm-poll-interval : polling interval (in ms)
- - cm-battery-stat : battery status - 0 for battery always present, 1 for no
- battery, 2 to check presence via fuel gauge, or 3 to check presence
- via charger
- - cm-fullbatt-vchkdrop-volt : voltage drop (in uV) before restarting charging
- - cm-fullbatt-voltage : voltage (in uV) of full battery
- - cm-fullbatt-soc : state of charge to consider as full battery
- - cm-fullbatt-capacity : capcity (in uAh) to consider as full battery
- - cm-thermal-zone : name of external thermometer's thermal zone
- - cm-battery-* : threshold battery temperature for charging
- -cold : critical cold temperature of battery for charging
- -cold-in-minus : flag that cold temperature is in minus degrees
- -hot : critical hot temperature of battery for charging
- -temp-diff : temperature difference to allow recharging
- - cm-dis/charging-max = limits of charging duration
-
-Deprecated properties:
- - cm-num-chargers
- - cm-fullbatt-vchkdrop-ms
-
-Example :
- charger-manager@0 {
- compatible = "charger-manager";
- chg-reg-supply = <&charger_regulator>;
-
- cm-name = "battery";
- /* Always polling ON : 30s */
- cm-poll-mode = <1>;
- cm-poll-interval = <30000>;
-
- cm-fullbatt-vchkdrop-volt = <150000>;
- cm-fullbatt-soc = <100>;
-
- cm-battery-stat = <3>;
-
- cm-chargers = "charger0", "charger1", "charger2";
-
- cm-fuel-gauge = "fuelgauge0";
-
- cm-thermal-zone = "thermal_zone.1"
- /* in deci centigrade */
- cm-battery-cold = <50>;
- cm-battery-cold-in-minus;
- cm-battery-hot = <800>;
- cm-battery-temp-diff = <100>;
-
- /* Allow charging for 5hr */
- cm-charging-max = <18000000>;
- /* Allow discharging for 2hr */
- cm-discharging-max = <7200000>;
-
- regulator@0 {
- cm-regulator-name = "chg-reg";
- cable@0 {
- cm-cable-name = "USB";
- cm-cable-extcon = "extcon-dev.0";
- cm-cable-min = <475000>;
- cm-cable-max = <500000>;
- };
- cable@1 {
- cm-cable-name = "SDP";
- cm-cable-extcon = "extcon-dev.0";
- cm-cable-min = <650000>;
- cm-cable-max = <675000>;
- };
- };
-
- };
new file mode 100644
@@ -0,0 +1,215 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/charger-manager.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Charger Manager
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+description: |
+ Binding for the legacy charger manager driver.
+ Please do not use for new products.
+
+properties:
+ compatible:
+ const: charger-manager
+
+ cm-chargers:
+ description: name of chargers
+ $ref: /schemas/types.yaml#/definitions/string-array
+
+ cm-num-chargers:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ deprecated: true
+
+ cm-fuel-gauge:
+ description: name of battery fuel gauge
+ $ref: /schemas/types.yaml#/definitions/string
+
+ cm-name:
+ description: name of the charger manager
+ default: battery
+ $ref: /schemas/types.yaml#/definitions/string
+
+ cm-poll-mode:
+ description: polling mode
+ default: 0
+ enum:
+ - 0 # disabled
+ - 1 # always
+ - 2 # when external power is connected
+ - 3 # when charging
+
+ cm-poll-interval:
+ description: polling interval (in ms)
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cm-battery-stat:
+ description: battery status
+ enum:
+ - 0 # battery always present
+ - 1 # no battery
+ - 2 # check presence via fuel gauge
+ - 3 # check presence via charger
+
+ cm-fullbatt-vchkdrop-volt:
+ description: voltage drop before restarting charging in uV
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cm-fullbatt-vchkdrop-ms:
+ deprecated: true
+
+ cm-fullbatt-voltage:
+ description: voltage of full battery in uV
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cm-fullbatt-soc:
+ description: state of charge to consider as full battery in %
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cm-fullbatt-capacity:
+ description: capcity to consider as full battery in uAh
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cm-thermal-zone:
+ description: name of external thermometer's thermal zone
+ $ref: /schemas/types.yaml#/definitions/string
+
+ cm-discharging-max:
+ description: limits of discharging duration in ms
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cm-charging-max:
+ description: limits of charging duration in ms
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cm-battery-cold:
+ description: critical cold temperature of battery for charging in deci-degree celsius
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cm-battery-cold-in-minus:
+ description: if set cm-battery-cold temperature is in minus degrees
+ type: boolean
+
+ cm-battery-hot:
+ description: critical hot temperature of battery for charging in deci-degree celsius
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cm-battery-temp-diff:
+ description: temperature difference to allow recharging in deci-degree celsius
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+patternProperties:
+ "-supply$":
+ description: regulator consumer, named according to cm-regulator-name
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ "^regulator[@-][0-9]$":
+ type: object
+ properties:
+ cm-regulator-name:
+ description: name of charger regulator
+ $ref: /schemas/types.yaml#/definitions/string
+
+ required:
+ - cm-regulator-name
+
+ additionalProperties: false
+
+ patternProperties:
+ "^cable[@-][0-9]$":
+ type: object
+ properties:
+ cm-cable-name:
+ description: name of charger cable
+ enum:
+ - USB
+ - USB-HOST
+ - SDP
+ - DCP
+ - CDP
+ - ACA
+ - FAST-CHARGER
+ - SLOW-CHARGER
+ - WPT
+ - PD
+ - DOCK
+ - JIG
+ - MECHANICAL
+
+ cm-cable-extcon:
+ description: name of extcon dev
+ $ref: /schemas/types.yaml#/definitions/string
+
+ cm-cable-min:
+ description: minimum current of cable in uA
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cm-cable-max:
+ description: maximum current of cable in uA
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ required:
+ - cm-cable-name
+ - cm-cable-extcon
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - cm-chargers
+ - cm-fuel-gauge
+
+additionalProperties: false
+
+examples:
+ - |
+ charger-manager {
+ compatible = "charger-manager";
+ chg-reg-supply = <&charger_regulator>;
+
+ cm-name = "battery";
+ /* Always polling ON : 30s */
+ cm-poll-mode = <1>;
+ cm-poll-interval = <30000>;
+
+ cm-fullbatt-vchkdrop-volt = <150000>;
+ cm-fullbatt-soc = <100>;
+
+ cm-battery-stat = <3>;
+
+ cm-chargers = "charger0", "charger1", "charger2";
+
+ cm-fuel-gauge = "fuelgauge0";
+
+ cm-thermal-zone = "thermal_zone.1";
+ /* in deci centigrade */
+ cm-battery-cold = <50>;
+ cm-battery-cold-in-minus;
+ cm-battery-hot = <800>;
+ cm-battery-temp-diff = <100>;
+
+ /* Allow charging for 5hr */
+ cm-charging-max = <18000000>;
+ /* Allow discharging for 2hr */
+ cm-discharging-max = <7200000>;
+
+ regulator-0 {
+ cm-regulator-name = "chg-reg";
+ cable-0 {
+ cm-cable-name = "USB";
+ cm-cable-extcon = "extcon-dev.0";
+ cm-cable-min = <475000>;
+ cm-cable-max = <500000>;
+ };
+ cable-1 {
+ cm-cable-name = "SDP";
+ cm-cable-extcon = "extcon-dev.0";
+ cm-cable-min = <650000>;
+ cm-cable-max = <675000>;
+ };
+ };
+ };
Convert the binding to DT schema format. I slightly modified the binding by allowing regulator-[0-9] and cable-[0-9] instead of regulator@[0-9] and cable@[0-9], so that DT compiler does not complain about missing 'reg' property. The driver actually ignores the nodename and can handle both styles. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> --- .../bindings/power/supply/charger-manager.txt | 91 -------- .../power/supply/charger-manager.yaml | 215 ++++++++++++++++++ 2 files changed, 215 insertions(+), 91 deletions(-) delete mode 100644 Documentation/devicetree/bindings/power/supply/charger-manager.txt create mode 100644 Documentation/devicetree/bindings/power/supply/charger-manager.yaml