diff mbox series

[3/3] arm64: dts: mt8195: Add thermal zone and thermal policy

Message ID 20210816164307.557315-4-abailon@baylibre.com (mailing list archive)
State New, archived
Delegated to: Daniel Lezcano
Headers show
Series Add support of thermal for mt8195 | expand

Commit Message

Alexandre Bailon Aug. 16, 2021, 4:43 p.m. UTC 
From: Tinghan Shen <tinghan.shen@mediatek.com>

1. Add SoC and board thermal zones.
2. Add thermal throttle policy

Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Signed-off-by: Ben Tseng <ben.tseng@mediatek.com>
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
---
 arch/arm64/boot/dts/mediatek/mt8195.dtsi | 164 +++++++++++++++++++++++
 1 file changed, 164 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index d05492ff8f190..62d0944dea4db 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -11,6 +11,7 @@ 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
 #include <dt-bindings/reset/ti-syscon.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "mediatek,mt8195";
@@ -475,6 +476,21 @@  spi0: spi@1100a000 {
 			status = "disabled";
 		};
 
+		lvts: lvts@1100b000 {
+			compatible = "mediatek,mt8195-lvts";
+			#thermal-sensor-cells = <1>;
+			reg = <0 0x1100b000 0 0x1000>,
+				<0 0x11278000 0 0x1000>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>,
+					<GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+			clock-names = "lvts_clk";
+			resets = <&infracfg_rst 1>,
+					<&infracfg_rst 2>;
+			nvmem-cells = <&lvts_e_data1 &lvts_e_data2>;
+			nvmem-cell-names = "e_data1","e_data2";
+		};
+
 		spi1: spi@11010000 {
 			compatible = "mediatek,mt8195-spi", "mediatek,mt6765-spi";
 			reg = <0 0x11010000 0 0x100>;
@@ -830,4 +846,152 @@  vdosys1: syscon@1c100000 {
 			#clock-cells = <1>;
 		};
 	};
+
+	thermal_zones: thermal-zones {
+		soc_max {
+			polling-delay = <1000>; /* milliseconds */
+			polling-delay-passive = <1000>; /* milliseconds */
+			thermal-sensors = <&lvts 0>;
+			sustainable-power = <1500>;
+
+			trips {
+				threshold: trip-point@0 {
+					temperature = <68000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				target: target@1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				soc_max_crit: soc_max_crit@0 {
+					temperature = <115000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+								<&cpu1
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+								<&cpu2
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+								<&cpu3
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+					contribution = <3072>;
+				};
+				map1 {
+					trip = <&target>;
+					cooling-device = <&cpu4
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+								<&cpu5
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+								<&cpu6
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+								<&cpu7
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+					contribution = <1024>;
+				};
+			};
+		};
+		cpu_big1 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 1>;
+		};
+		cpu_big2 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 2>;
+		};
+		cpu_big3 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 3>;
+		};
+		cpu_big4 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 4>;
+		};
+		cpu_little1{
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 5>;
+		};
+		cpu_little2 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 6>;
+		};
+		cpu_little3 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 7>;
+		};
+		cpu_little4 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 8>;
+		};
+		vpu1 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 9>;
+		};
+		vpu2 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 10>;
+		};
+		gpu1 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 11>;
+		};
+		gpu2 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 12>;
+		};
+		vdec {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 13>;
+		};
+		img {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 14>;
+		};
+		infra {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 15>;
+		};
+		cam1 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 16>;
+		};
+		cam2 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 17>;
+		};
+	};
 };