| Message ID | 20220110144039.5810-1-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Daniel Lezcano |
| Headers | show |
| Series | [v4] thermal: rcar_thermal: Use platform_get_irq_optional() to get the interrupt | expand |
On Tue, Jan 11, 2022 at 4:24 AM Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote: > platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static > allocation of IRQ resources in DT core code, this causes an issue > when using hierarchical interrupt domains using "interrupts" property > in the node as this bypasses the hierarchical setup and messes up the > irq chaining. > > In preparation for removal of static setup of IRQ resource from DT core > code use platform_get_irq_optional(). > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
Hi Niklas, On Mon, Jan 10, 2022 at 2:40 PM Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote: > > platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static > allocation of IRQ resources in DT core code, this causes an issue > when using hierarchical interrupt domains using "interrupts" property > in the node as this bypasses the hierarchical setup and messes up the > irq chaining. > > In preparation for removal of static setup of IRQ resource from DT core > code use platform_get_irq_optional(). > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > --- > v3->v4: > * Updated check as suggested by Andy > > v2->v3: > * Fixed review comment pointed by Andy > > v1->v2 > * Simplified checking error code > * Break loop earlier if no interrupts are seen > > v1: https://lkml.org/lkml/2021/12/18/163 > --- > drivers/thermal/rcar_thermal.c | 17 ++++++++++++----- > 1 file changed, 12 insertions(+), 5 deletions(-) > This patch is not in -next yet. In which release v5.18/19 do you plan to merge this in? Cheers, Prabhakar > diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c > index b49f04daaf47..1d729ed4d685 100644 > --- a/drivers/thermal/rcar_thermal.c > +++ b/drivers/thermal/rcar_thermal.c > @@ -445,7 +445,7 @@ static int rcar_thermal_probe(struct platform_device *pdev) > struct rcar_thermal_common *common; > struct rcar_thermal_priv *priv; > struct device *dev = &pdev->dev; > - struct resource *res, *irq; > + struct resource *res; > const struct rcar_thermal_chip *chip = of_device_get_match_data(dev); > int mres = 0; > int i; > @@ -467,9 +467,16 @@ static int rcar_thermal_probe(struct platform_device *pdev) > pm_runtime_get_sync(dev); > > for (i = 0; i < chip->nirqs; i++) { > - irq = platform_get_resource(pdev, IORESOURCE_IRQ, i); > - if (!irq) > - continue; > + int irq; > + > + ret = platform_get_irq_optional(pdev, i); > + if (ret < 0 && ret != -ENXIO) > + goto error_unregister; > + if (ret > 0) > + irq = ret; > + else > + break; > + > if (!common->base) { > /* > * platform has IRQ support. > @@ -487,7 +494,7 @@ static int rcar_thermal_probe(struct platform_device *pdev) > idle = 0; /* polling delay is not needed */ > } > > - ret = devm_request_irq(dev, irq->start, rcar_thermal_irq, > + ret = devm_request_irq(dev, irq, rcar_thermal_irq, > IRQF_SHARED, dev_name(dev), common); > if (ret) { > dev_err(dev, "irq request failed\n "); > -- > 2.17.1 >
On 09/03/2022 12:59, Lad, Prabhakar wrote: [ ... ] >> --- >> drivers/thermal/rcar_thermal.c | 17 ++++++++++++----- >> 1 file changed, 12 insertions(+), 5 deletions(-) >> > This patch is not in -next yet. In which release v5.18/19 do you plan > to merge this in? Right, I missed it, I'll try to catch it up for v5.18-rc1, may be with a second PR. It is in the linux-next branch now and will land in linux-next tree
On Wed, Mar 9, 2022 at 12:40 PM Daniel Lezcano <daniel.lezcano@linaro.org> wrote: > > On 09/03/2022 12:59, Lad, Prabhakar wrote: > > [ ... ] > > >> --- > >> drivers/thermal/rcar_thermal.c | 17 ++++++++++++----- > >> 1 file changed, 12 insertions(+), 5 deletions(-) > >> > > This patch is not in -next yet. In which release v5.18/19 do you plan > > to merge this in? > Right, I missed it, I'll try to catch it up for v5.18-rc1, may be with a > second PR. > should be OK. > It is in the linux-next branch now and will land in linux-next tree > Thanks. Cheers, Prabhakar
diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c index b49f04daaf47..1d729ed4d685 100644 --- a/drivers/thermal/rcar_thermal.c +++ b/drivers/thermal/rcar_thermal.c @@ -445,7 +445,7 @@ static int rcar_thermal_probe(struct platform_device *pdev) struct rcar_thermal_common *common; struct rcar_thermal_priv *priv; struct device *dev = &pdev->dev; - struct resource *res, *irq; + struct resource *res; const struct rcar_thermal_chip *chip = of_device_get_match_data(dev); int mres = 0; int i; @@ -467,9 +467,16 @@ static int rcar_thermal_probe(struct platform_device *pdev) pm_runtime_get_sync(dev); for (i = 0; i < chip->nirqs; i++) { - irq = platform_get_resource(pdev, IORESOURCE_IRQ, i); - if (!irq) - continue; + int irq; + + ret = platform_get_irq_optional(pdev, i); + if (ret < 0 && ret != -ENXIO) + goto error_unregister; + if (ret > 0) + irq = ret; + else + break; + if (!common->base) { /* * platform has IRQ support. @@ -487,7 +494,7 @@ static int rcar_thermal_probe(struct platform_device *pdev) idle = 0; /* polling delay is not needed */ } - ret = devm_request_irq(dev, irq->start, rcar_thermal_irq, + ret = devm_request_irq(dev, irq, rcar_thermal_irq, IRQF_SHARED, dev_name(dev), common); if (ret) { dev_err(dev, "irq request failed\n ");
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq_optional(). Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> --- v3->v4: * Updated check as suggested by Andy v2->v3: * Fixed review comment pointed by Andy v1->v2 * Simplified checking error code * Break loop earlier if no interrupts are seen v1: https://lkml.org/lkml/2021/12/18/163 --- drivers/thermal/rcar_thermal.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-)