Message ID | 20220401202643.877609-3-caleb.connolly@linaro.org (mailing list archive) |
---|---|
State | Handled Elsewhere, archived |
Headers | show |
Series | power: supply: introduce the Qualcomm smb2 | expand |
On 01/04/2022 22:26, Caleb Connolly wrote: > Add a node for the smb2 charger hardware found on the pmi8998. > > Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> > --- > arch/arm64/boot/dts/qcom/pmi8998.dtsi | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi > index da10668c361d..b98dad166a0b 100644 > --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi > +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi > @@ -9,6 +9,21 @@ pmi8998_lsid0: pmic@2 { > #address-cells = <1>; > #size-cells = <0>; > > + pmi8998_smb2: smb2@1000 { Generic node name please, so "charger". Have in mind that PMIC (parent's) schema might require it. If it exists (I did not check), it should reference also your charger's schema. Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi index da10668c361d..b98dad166a0b 100644 --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi @@ -9,6 +9,21 @@ pmi8998_lsid0: pmic@2 { #address-cells = <1>; #size-cells = <0>; + pmi8998_smb2: smb2@1000 { + compatible = "qcom,pmi8998-smb2"; + reg = <0x1000>; + + interrupts = <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "usb-plugin"; + + io-channels = <&pmi8998_rradc 3>, + <&pmi8998_rradc 4>; + io-channel-names = "usbin_i", + "usbin_v"; + + status = "disabled"; + }; + pmi8998_gpio: gpios@c000 { compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio"; reg = <0xc000>;
Add a node for the smb2 charger hardware found on the pmi8998. Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> --- arch/arm64/boot/dts/qcom/pmi8998.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+)