diff mbox series

[v3,3/5] arm64: dts: imx8m: Document the fuse address calculation

Message ID 20221202162353.274009-3-marex@denx.de (mailing list archive)
State New, archived
Delegated to: Daniel Lezcano
Headers show
Series [v3,1/5] dt-bindings: thermal: imx8mm-thermal: Document optional nvmem-cells | expand

Commit Message

Marek Vasut Dec. 2, 2022, 4:23 p.m. UTC
The mapping from OCOTP reg DT property to Fusemap Descriptions Table in
the datasheet is often unclear. Add a comment to make it easier to find
out how it works. No functional change.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Adam Ford <aford173@gmail.com>
Cc: Alice Guo <alice.guo@nxp.com>
Cc: Amit Kucheria <amitk@kernel.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Li Jun <jun.li@nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: devicetree@vger.kernel.org
To: linux-pm@vger.kernel.org
To: linux-arm-kernel@lists.infradead.org
---
V2: Add RB from Peng
V3: No change
---
 arch/arm64/boot/dts/freescale/imx8mm.dtsi | 19 ++++++++++++++++---
 arch/arm64/boot/dts/freescale/imx8mn.dtsi | 19 ++++++++++++++++---
 arch/arm64/boot/dts/freescale/imx8mp.dtsi | 21 +++++++++++++++++----
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 19 ++++++++++++++++---
 4 files changed, 65 insertions(+), 13 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 423cb36cbcd53..513c2de0caa15 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -563,15 +563,28 @@  ocotp: efuse@30350000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 
-				imx8mm_uid: unique-id@4 {
+				/*
+				 * The register address below maps to the MX8M
+				 * Fusemap Description Table entries this way.
+				 * Assuming
+				 *   reg = <ADDR SIZE>;
+				 * then
+				 *   Fuse Address = (ADDR * 4) + 0x400
+				 * Note that if SIZE is greater than 4, then
+				 * each subsequent fuse is located at offset
+				 * +0x10 in Fusemap Description Table (e.g.
+				 * reg = <0x4 0x8> describes fuses 0x410 and
+				 * 0x420).
+				 */
+				imx8mm_uid: unique-id@4 { /* 0x410-0x420 */
 					reg = <0x4 0x8>;
 				};
 
-				cpu_speed_grade: speed-grade@10 {
+				cpu_speed_grade: speed-grade@10 { /* 0x440 */
 					reg = <0x10 4>;
 				};
 
-				fec_mac_address: mac-address@90 {
+				fec_mac_address: mac-address@90 { /* 0x640 */
 					reg = <0x90 6>;
 				};
 			};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 312e3abc35ea8..068f599cdf757 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -564,15 +564,28 @@  ocotp: efuse@30350000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 
-				imx8mn_uid: unique-id@4 {
+				/*
+				 * The register address below maps to the MX8M
+				 * Fusemap Description Table entries this way.
+				 * Assuming
+				 *   reg = <ADDR SIZE>;
+				 * then
+				 *   Fuse Address = (ADDR * 4) + 0x400
+				 * Note that if SIZE is greater than 4, then
+				 * each subsequent fuse is located at offset
+				 * +0x10 in Fusemap Description Table (e.g.
+				 * reg = <0x4 0x8> describes fuses 0x410 and
+				 * 0x420).
+				 */
+				imx8mn_uid: unique-id@4 { /* 0x410-0x420 */
 					reg = <0x4 0x8>;
 				};
 
-				cpu_speed_grade: speed-grade@10 {
+				cpu_speed_grade: speed-grade@10 { /* 0x440 */
 					reg = <0x10 4>;
 				};
 
-				fec_mac_address: mac-address@90 {
+				fec_mac_address: mac-address@90 { /* 0x640 */
 					reg = <0x90 6>;
 				};
 			};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index c9459ed21b243..ddcd5e23ba47d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -426,19 +426,32 @@  ocotp: efuse@30350000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 
-				imx8mp_uid: unique-id@8 {
+				/*
+				 * The register address below maps to the MX8M
+				 * Fusemap Description Table entries this way.
+				 * Assuming
+				 *   reg = <ADDR SIZE>;
+				 * then
+				 *   Fuse Address = (ADDR * 4) + 0x400
+				 * Note that if SIZE is greater than 4, then
+				 * each subsequent fuse is located at offset
+				 * +0x10 in Fusemap Description Table (e.g.
+				 * reg = <0x8 0x8> describes fuses 0x420 and
+				 * 0x430).
+				 */
+				imx8mp_uid: unique-id@8 { /* 0x420-0x430 */
 					reg = <0x8 0x8>;
 				};
 
-				cpu_speed_grade: speed-grade@10 {
+				cpu_speed_grade: speed-grade@10 { /* 0x440 */
 					reg = <0x10 4>;
 				};
 
-				eth_mac1: mac-address@90 {
+				eth_mac1: mac-address@90 { /* 0x640 */
 					reg = <0x90 6>;
 				};
 
-				eth_mac2: mac-address@96 {
+				eth_mac2: mac-address@96 { /* 0x658 */
 					reg = <0x96 6>;
 				};
 			};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 2b6d3f4ff5d93..8a2ec90b493d9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -593,15 +593,28 @@  ocotp: efuse@30350000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 
-				imx8mq_uid: soc-uid@4 {
+				/*
+				 * The register address below maps to the MX8M
+				 * Fusemap Description Table entries this way.
+				 * Assuming
+				 *   reg = <ADDR SIZE>;
+				 * then
+				 *   Fuse Address = (ADDR * 4) + 0x400
+				 * Note that if SIZE is greater than 4, then
+				 * each subsequent fuse is located at offset
+				 * +0x10 in Fusemap Description Table (e.g.
+				 * reg = <0x4 0x8> describes fuses 0x410 and
+				 * 0x420).
+				 */
+				imx8mq_uid: soc-uid@4 { /* 0x410-0x420 */
 					reg = <0x4 0x8>;
 				};
 
-				cpu_speed_grade: speed-grade@10 {
+				cpu_speed_grade: speed-grade@10 { /* 0x440 */
 					reg = <0x10 4>;
 				};
 
-				fec_mac_address: mac-address@90 {
+				fec_mac_address: mac-address@90 { /* 0x640 */
 					reg = <0x90 6>;
 				};
 			};