| Message ID | 20230123193422.15972-1-ansuelsmth@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | viresh kumar |
| Headers | show |
| Series | [v3,1/2] dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional | expand |
On 23/01/2023 20:34, Christian Marangi wrote: > The qcom-cpufreq-nvmem driver supports 2 kind of devices: > - pre-cpr that doesn't have power-domains and base everything on nvmem > cells and multiple named microvolt bindings > - cpr-based that require power-domain in the cpu nodes and use various > source to decide the correct voltage and freq > > When the schema was introduced, it was wrongly set to always require these > binding but this is not the case for pre-cpr devices. > > Make the power-domain optional and set them required only for qcs404 > based devices. > > While at it also make more clear what the opp-table supports by adding > ref to the opp-v2-kryo-cpu and opp-v2-qcom-level schema. > > Fixes: ec24d1d55469 ("dt-bindings: opp: Convert qcom-nvmem-cpufreq to DT schema") > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> > --- > > Changes v2: > - Reword commit description > - Fix condition order > - Add allOf > > .../bindings/cpufreq/qcom-cpufreq-nvmem.yaml | 81 +++++++++++++------ > 1 file changed, 56 insertions(+), 25 deletions(-) > > diff --git a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml > index 9c086eac6ca7..6f5e7904181f 100644 > --- a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml > +++ b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml > @@ -17,6 +17,9 @@ description: | > on the CPU OPP in use. The CPUFreq driver sets the CPR power domain level > according to the required OPPs defined in the CPU OPP tables. > > + For old implementation efuses are parsed to select the correct opp table and > + voltage and CPR is not supported/used. > + > select: > properties: > compatible: > @@ -33,37 +36,65 @@ select: > required: > - compatible > > -properties: > - cpus: > - type: object > - > - patternProperties: > - '^cpu@[0-9a-f]+$': > - type: object > - > - properties: > - power-domains: > - maxItems: 1 > - > - power-domain-names: > - items: > - - const: cpr > - > - required: > - - power-domains > - - power-domain-names > - > patternProperties: > '^opp-table(-[a-z0-9]+)?$': > - if: > + allOf: > + - if: > + properties: > + compatible: > + const: operating-points-v2-kryo-cpu > + then: > + $ref: /schemas/opp/opp-v2-kryo-cpu.yaml# > + > + - if: > + properties: > + compatible: > + const: operating-points-v2-qcom-level > + then: > + $ref: /schemas/opp/opp-v2-qcom-level.yaml# This entire part looks independent, please split it into separate patch with its own explanation. What I still miss here - why do you remove "required-opps" from required properties. It's not clear to me at all. Best regards, Krzysztof
On Thu, Jan 26, 2023 at 12:17:56PM +0100, Krzysztof Kozlowski wrote: > On 23/01/2023 20:34, Christian Marangi wrote: > > The qcom-cpufreq-nvmem driver supports 2 kind of devices: > > - pre-cpr that doesn't have power-domains and base everything on nvmem > > cells and multiple named microvolt bindings > > - cpr-based that require power-domain in the cpu nodes and use various > > source to decide the correct voltage and freq > > > > When the schema was introduced, it was wrongly set to always require these > > binding but this is not the case for pre-cpr devices. > > > > Make the power-domain optional and set them required only for qcs404 > > based devices. > > > > While at it also make more clear what the opp-table supports by adding > > ref to the opp-v2-kryo-cpu and opp-v2-qcom-level schema. > > > > Fixes: ec24d1d55469 ("dt-bindings: opp: Convert qcom-nvmem-cpufreq to DT schema") > > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> > > --- > > > > Changes v2: > > - Reword commit description > > - Fix condition order > > - Add allOf > > > > .../bindings/cpufreq/qcom-cpufreq-nvmem.yaml | 81 +++++++++++++------ > > 1 file changed, 56 insertions(+), 25 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml > > index 9c086eac6ca7..6f5e7904181f 100644 > > --- a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml > > +++ b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml > > @@ -17,6 +17,9 @@ description: | > > on the CPU OPP in use. The CPUFreq driver sets the CPR power domain level > > according to the required OPPs defined in the CPU OPP tables. > > > > + For old implementation efuses are parsed to select the correct opp table and > > + voltage and CPR is not supported/used. > > + > > select: > > properties: > > compatible: > > @@ -33,37 +36,65 @@ select: > > required: > > - compatible > > > > -properties: > > - cpus: > > - type: object > > - > > - patternProperties: > > - '^cpu@[0-9a-f]+$': > > - type: object > > - > > - properties: > > - power-domains: > > - maxItems: 1 > > - > > - power-domain-names: > > - items: > > - - const: cpr > > - > > - required: > > - - power-domains > > - - power-domain-names > > - > > patternProperties: > > '^opp-table(-[a-z0-9]+)?$': > > - if: > > + allOf: > > + - if: > > + properties: > > + compatible: > > + const: operating-points-v2-kryo-cpu > > + then: > > + $ref: /schemas/opp/opp-v2-kryo-cpu.yaml# > > + > > + - if: > > + properties: > > + compatible: > > + const: operating-points-v2-qcom-level > > + then: > > + $ref: /schemas/opp/opp-v2-qcom-level.yaml# > > This entire part looks independent, please split it into separate patch > with its own explanation. What I still miss here - why do you remove > "required-opps" from required properties. It's not clear to me at all. > Hi, the required-opps needs to be part of this patch since they are only needed for genpd based devices. I will split the additional if parts in another patch since they are not related.
diff --git a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml index 9c086eac6ca7..6f5e7904181f 100644 --- a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml +++ b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml @@ -17,6 +17,9 @@ description: | on the CPU OPP in use. The CPUFreq driver sets the CPR power domain level according to the required OPPs defined in the CPU OPP tables. + For old implementation efuses are parsed to select the correct opp table and + voltage and CPR is not supported/used. + select: properties: compatible: @@ -33,37 +36,65 @@ select: required: - compatible -properties: - cpus: - type: object - - patternProperties: - '^cpu@[0-9a-f]+$': - type: object - - properties: - power-domains: - maxItems: 1 - - power-domain-names: - items: - - const: cpr - - required: - - power-domains - - power-domain-names - patternProperties: '^opp-table(-[a-z0-9]+)?$': - if: + allOf: + - if: + properties: + compatible: + const: operating-points-v2-kryo-cpu + then: + $ref: /schemas/opp/opp-v2-kryo-cpu.yaml# + + - if: + properties: + compatible: + const: operating-points-v2-qcom-level + then: + $ref: /schemas/opp/opp-v2-qcom-level.yaml# + + unevaluatedProperties: false + +allOf: + - if: properties: compatible: - const: operating-points-v2-kryo-cpu + contains: + enum: + - qcom,qcs404 + then: + properties: + cpus: + type: object + + patternProperties: + '^cpu@[0-9a-f]+$': + type: object + + properties: + power-domains: + maxItems: 1 + + power-domain-names: + items: + - const: cpr + + required: + - power-domains + - power-domain-names + patternProperties: - '^opp-?[0-9]+$': - required: - - required-opps + '^opp-table(-[a-z0-9]+)?$': + if: + properties: + compatible: + const: operating-points-v2-kryo-cpu + then: + patternProperties: + '^opp-?[0-9]+$': + required: + - required-opps additionalProperties: true
The qcom-cpufreq-nvmem driver supports 2 kind of devices: - pre-cpr that doesn't have power-domains and base everything on nvmem cells and multiple named microvolt bindings - cpr-based that require power-domain in the cpu nodes and use various source to decide the correct voltage and freq When the schema was introduced, it was wrongly set to always require these binding but this is not the case for pre-cpr devices. Make the power-domain optional and set them required only for qcs404 based devices. While at it also make more clear what the opp-table supports by adding ref to the opp-v2-kryo-cpu and opp-v2-qcom-level schema. Fixes: ec24d1d55469 ("dt-bindings: opp: Convert qcom-nvmem-cpufreq to DT schema") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> --- Changes v2: - Reword commit description - Fix condition order - Add allOf .../bindings/cpufreq/qcom-cpufreq-nvmem.yaml | 81 +++++++++++++------ 1 file changed, 56 insertions(+), 25 deletions(-)