[v3] power: reset: add Odroid Go Ultra poweroff driver

Commit Message

Neil Armstrong Feb. 10, 2023, 10:03 a.m. UTC

The Hardkernel Odroid Go Ultra poweroff scheme requires requesting a poweroff
to its two PMICs in order, this represents the poweroff scheme needed to complete
a clean poweroff of the system.

This implement this scheme by implementing a self registering driver to permit
using probe defer until both pmics are finally probed.

Signed-off-by: Neil Armstrong <[e-mail]>
---
Previous submission was at [1], but I converted it to an independent
platform device with device auto registration to permit waiting for
both the PMICs drivers to probe.

[1] https://lore.kernel.org/all/[e-mail]/
---
Changes in v3:
- Removed dependency with rk08
- Switched to storing struct device of pmics
- Fixed module init/exit
- Link to v2: https://lore.kernel.org/r/[e-mail]

Changes in v2:
- Switched to devm_register_sys_off_handler()
- Link to v1: https://lore.kernel.org/r/[e-mail]
---
 drivers/power/reset/Kconfig                    |   7 +
 drivers/power/reset/Makefile                   |   1 +
 drivers/power/reset/odroid-go-ultra-poweroff.c | 193 +++++++++++++++++++++++++
 3 files changed, 201 insertions(+)


---
base-commit: 38d2b86a665b5e86371a1a30228bce259aa6c101
change-id: 20230126-b4-odroid-go-ultra-poweroff-c8fdca93f3eb

Best regards,

Comments

Sebastian Reichel Feb. 13, 2023, 8:42 p.m. UTC | #1

Hi,

On Fri, Feb 10, 2023 at 11:03:36AM +0100, Neil Armstrong wrote:
> The Hardkernel Odroid Go Ultra poweroff scheme requires requesting a poweroff
> to its two PMICs in order, this represents the poweroff scheme needed to complete
> a clean poweroff of the system.
> 
> This implement this scheme by implementing a self registering driver to permit
> using probe defer until both pmics are finally probed.
> 
> Signed-off-by: Neil Armstrong <[e-mail]>
> ---
> Previous submission was at [1], but I converted it to an independent
> platform device with device auto registration to permit waiting for
> both the PMICs drivers to probe.
> 
> [1] https://lore.kernel.org/all/[e-mail]/
> ---
> Changes in v3:
> - Removed dependency with rk08
> - Switched to storing struct device of pmics
> - Fixed module init/exit
> - Link to v2: https://lore.kernel.org/r/[e-mail]
> 
> Changes in v2:
> - Switched to devm_register_sys_off_handler()
> - Link to v1: https://lore.kernel.org/r/[e-mail]
> ---
>  drivers/power/reset/Kconfig                    |   7 +
>  drivers/power/reset/Makefile                   |   1 +
>  drivers/power/reset/odroid-go-ultra-poweroff.c | 193 +++++++++++++++++++++++++
>  3 files changed, 201 insertions(+)
> 
> diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
> index a8c46ba5878f..a47ef7a9fc13 100644
> --- a/drivers/power/reset/Kconfig
> +++ b/drivers/power/reset/Kconfig
> @@ -141,6 +141,13 @@ config POWER_RESET_OCELOT_RESET
>  	help
>  	  This driver supports restart for Microsemi Ocelot SoC and similar.
>  
> +config POWER_RESET_ODROID_GO_ULTRA_POWEROFF
> +	bool "Odroid Go Ultra power-off driver"
> +	depends on ARCH_MESON || COMPILE_TEST
> +	depends on OF
> +	help
> +	  This driver supports Power off for Odroid Go Ultra device.
> +
>  config POWER_RESET_OXNAS
>  	bool "OXNAS SoC restart driver"
>  	depends on ARCH_OXNAS
> diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
> index 0a39424fc558..d763e6735ee3 100644
> --- a/drivers/power/reset/Makefile
> +++ b/drivers/power/reset/Makefile
> @@ -17,6 +17,7 @@ obj-$(CONFIG_POWER_RESET_MT6323) += mt6323-poweroff.o
>  obj-$(CONFIG_POWER_RESET_OXNAS) += oxnas-restart.o
>  obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
>  obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
> +obj-$(CONFIG_POWER_RESET_ODROID_GO_ULTRA_POWEROFF) += odroid-go-ultra-poweroff.o
>  obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o
>  obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o
>  obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
> diff --git a/drivers/power/reset/odroid-go-ultra-poweroff.c b/drivers/power/reset/odroid-go-ultra-poweroff.c
> new file mode 100644
> index 000000000000..30a005088fbe
> --- /dev/null
> +++ b/drivers/power/reset/odroid-go-ultra-poweroff.c
> @@ -0,0 +1,193 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) 2023 Neil Armstrong <[e-mail]>
> + */
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/of_platform.h>
> +#include <linux/mfd/rk808.h>
> +#include <linux/regmap.h>
> +#include <linux/module.h>
> +#include <linux/reboot.h>
> +#include <linux/i2c.h>
> +
> +/*
> + * The Odroid Go Ultra has 2 PMICs:
> + * - RK818 (manages the battery and USB-C power supply)
> + * - RK817
> + * Both PMICs feeds power to the S922X SoC, so they must be powered-off in sequence.
> + * Vendor does power-off the RK817 first, then the RK818 so here we follow this sequence.
> + */
> +
> +struct odroid_go_ultra_poweroff_data {
> +	struct device *dev;
> +	struct device *rk817;
> +	struct device *rk818;
> +};
> +
> +static int odroid_go_ultra_poweroff_prepare(struct sys_off_data *data)
> +{
> +	struct odroid_go_ultra_poweroff_data *poweroff_data = data->cb_data;
> +	struct regmap *rk817, *rk818;
> +	int ret;
> +
> +	/* RK817 Regmap */
> +	rk817 = dev_get_regmap(poweroff_data->rk817, NULL);
> +	if (!rk817) {
> +		dev_err(poweroff_data->dev, "failed to get rk817 regmap\n");
> +		return notifier_from_errno(-EINVAL);
> +	}
> +
> +	/* RK818 Regmap */
> +	rk818 = dev_get_regmap(poweroff_data->rk818, NULL);
> +	if (!rk818) {
> +		dev_err(poweroff_data->dev, "failed to get rk818 regmap\n");
> +		return notifier_from_errno(-EINVAL);
> +	}
> +
> +	dev_info(poweroff_data->dev, "Setting PMICs for power off");
> +
> +	/* RK817 */
> +	ret = regmap_update_bits(rk817, RK817_SYS_CFG(3), DEV_OFF, DEV_OFF);
> +	if (ret) {
> +		dev_err(poweroff_data->dev, "failed to poweroff rk817\n");
> +		return notifier_from_errno(ret);
> +	}
> +
> +	/* RK818 */
> +	ret = regmap_update_bits(rk818, RK818_DEVCTRL_REG, DEV_OFF, DEV_OFF);
> +	if (ret) {
> +		dev_err(poweroff_data->dev, "failed to poweroff rk818\n");
> +		return notifier_from_errno(ret);
> +	}
> +
> +	return NOTIFY_OK;
> +}
> +
> +static int odroid_go_ultra_poweroff_get_pmic_device(const char *compatible, struct device **pmic)
> +{
> +	struct device_node *pmic_node;
> +	struct i2c_client *pmic_client;
> +
> +	pmic_node = of_find_compatible_node(NULL, NULL, compatible);
> +	if (!pmic_node)
> +		return -ENODEV;
> +
> +	pmic_client = of_find_i2c_device_by_node(pmic_node);
> +	of_node_put(pmic_node);
> +	if (!pmic_client)
> +		return -EPROBE_DEFER;
> +
> +	*pmic = &pmic_client->dev;
> +
> +	return 0;
> +}
> +
> +static int odroid_go_ultra_poweroff_probe(struct platform_device *pdev)
> +{
> +	struct odroid_go_ultra_poweroff_data *poweroff_data;
> +	int ret;
> +
> +	poweroff_data = devm_kzalloc(&pdev->dev, sizeof(*poweroff_data), GFP_KERNEL);
> +	if (!poweroff_data)
> +		return -ENOMEM;
> +
> +	dev_set_drvdata(&pdev->dev, poweroff_data);
> +
> +	/* RK818 PMIC Device */
> +	ret = odroid_go_ultra_poweroff_get_pmic_device("rockchip,rk818",
> +						       &poweroff_data->rk818);
> +	if (ret)
> +		return dev_err_probe(&pdev->dev, ret, "failed to get rk818 mfd data\n");
> +
> +	/* RK817 PMIC Device */
> +	ret = odroid_go_ultra_poweroff_get_pmic_device("rockchip,rk817",
> +						       &poweroff_data->rk817);
> +	if (ret) {
> +		ret  = dev_err_probe(&pdev->dev, ret, "failed to get rk817 mfd data\n");
> +		goto put_rk818_device;
> +	}
> +
> +	/* Register as SYS_OFF_MODE_POWER_OFF_PREPARE because regmap_update_bits may sleep */
> +	ret = devm_register_sys_off_handler(&pdev->dev,
> +					    SYS_OFF_MODE_POWER_OFF_PREPARE,
> +					    SYS_OFF_PRIO_DEFAULT,
> +					    odroid_go_ultra_poweroff_prepare,
> +					    poweroff_data);
> +	if (ret) {
> +		ret = dev_err_probe(&pdev->dev, ret, "failed to register sys-off handler\n");
> +		goto put_rk817_device;
> +	}

Allocating managed resources after a traditional allocation always
rings an alarm bell. The problem is, that the order at removal time
will not be the reverse of the allocation chain in this case.

You can fix this by handling the put_device for rk817 and rk818 via
devm_add_action_or_reset() (preferred by me) or by switching
devm_register_sys_off_handler() to register_sys_off_handler.

Otherwise the driver LGTM.

-- Sebastian

> +
> +	dev_info(&pdev->dev, "Registered Power-Off handler\n");
> +
> +	return 0;
> +
> +put_rk817_device:
> +	put_device(poweroff_data->rk817);
> +
> +put_rk818_device:
> +	put_device(poweroff_data->rk818);
> +
> +	return ret;
> +}
> +
> +static int odroid_go_ultra_poweroff_remove(struct platform_device *pdev)
> +{
> +	struct odroid_go_ultra_poweroff_data *poweroff_data = dev_get_drvdata(&pdev->dev);
> +
> +	put_device(poweroff_data->rk818);
> +	put_device(poweroff_data->rk817);
> +
> +	return 0;
> +}
> +
> +static struct platform_device *pdev;
> +
> +static struct platform_driver odroid_go_ultra_poweroff_driver = {
> +	.driver = {
> +		.name	= "odroid-go-ultra-poweroff",
> +	},
> +	.probe = odroid_go_ultra_poweroff_probe,
> +	.remove = odroid_go_ultra_poweroff_remove,
> +};
> +
> +static int __init odroid_go_ultra_poweroff_init(void)
> +{
> +	int ret;
> +
> +	/* Only create when running on the Odroid Go Ultra device */
> +	if (!of_device_is_compatible(of_root, "hardkernel,odroid-go-ultra"))
> +		return -ENODEV;
> +
> +	ret = platform_driver_register(&odroid_go_ultra_poweroff_driver);
> +	if (ret)
> +		return ret;
> +
> +	pdev = platform_device_register_resndata(NULL, "odroid-go-ultra-poweroff", -1,
> +						 NULL, 0, NULL, 0);
> +
> +	if (IS_ERR(pdev)) {
> +		platform_driver_unregister(&odroid_go_ultra_poweroff_driver);
> +		return PTR_ERR(pdev);
> +	}
> +
> +	return 0;
> +}
> +
> +static void __exit odroid_go_ultra_poweroff_exit(void)
> +{
> +	/* Only delete when running on the Odroid Go Ultra device */
> +	if (!of_device_is_compatible(of_root, "hardkernel,odroid-go-ultra"))
> +		return;
> +
> +	platform_device_unregister(pdev);
> +	platform_driver_unregister(&odroid_go_ultra_poweroff_driver);
> +}
> +
> +module_init(odroid_go_ultra_poweroff_init);
> +module_exit(odroid_go_ultra_poweroff_exit);
> +
> +MODULE_AUTHOR("Neil Armstrong <[e-mail]>");
> +MODULE_DESCRIPTION("Odroid Go Ultra poweroff driver");
> +MODULE_LICENSE("GPL");
> 
> ---
> base-commit: 38d2b86a665b5e86371a1a30228bce259aa6c101
> change-id: 20230126-b4-odroid-go-ultra-poweroff-c8fdca93f3eb
> 
> Best regards,
> -- 
> Neil Armstrong <[e-mail]>
>

Neil Armstrong Feb. 14, 2023, 4:33 p.m. UTC | #2

On 13/02/2023 21:42, Sebastian Reichel wrote:
> Hi,
> 
> On Fri, Feb 10, 2023 at 11:03:36AM +0100, Neil Armstrong wrote:
>> The Hardkernel Odroid Go Ultra poweroff scheme requires requesting a poweroff
>> to its two PMICs in order, this represents the poweroff scheme needed to complete
>> a clean poweroff of the system.
>>
>> This implement this scheme by implementing a self registering driver to permit
>> using probe defer until both pmics are finally probed.
>>
>> Signed-off-by: Neil Armstrong <[e-mail]>
>> ---
>> Previous submission was at [1], but I converted it to an independent
>> platform device with device auto registration to permit waiting for
>> both the PMICs drivers to probe.
>>
>> [1] https://lore.kernel.org/all/[e-mail]/
>> ---
>> Changes in v3:
>> - Removed dependency with rk08
>> - Switched to storing struct device of pmics
>> - Fixed module init/exit
>> - Link to v2: https://lore.kernel.org/r/[e-mail]
>>
>> Changes in v2:
>> - Switched to devm_register_sys_off_handler()
>> - Link to v1: https://lore.kernel.org/r/[e-mail]
>> ---
>>   drivers/power/reset/Kconfig                    |   7 +
>>   drivers/power/reset/Makefile                   |   1 +
>>   drivers/power/reset/odroid-go-ultra-poweroff.c | 193 +++++++++++++++++++++++++
>>   3 files changed, 201 insertions(+)
>>
>> diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
>> index a8c46ba5878f..a47ef7a9fc13 100644
>> --- a/drivers/power/reset/Kconfig
>> +++ b/drivers/power/reset/Kconfig
>> @@ -141,6 +141,13 @@ config POWER_RESET_OCELOT_RESET
>>   	help
>>   	  This driver supports restart for Microsemi Ocelot SoC and similar.
>>   
>> +config POWER_RESET_ODROID_GO_ULTRA_POWEROFF
>> +	bool "Odroid Go Ultra power-off driver"
>> +	depends on ARCH_MESON || COMPILE_TEST
>> +	depends on OF
>> +	help
>> +	  This driver supports Power off for Odroid Go Ultra device.
>> +
>>   config POWER_RESET_OXNAS
>>   	bool "OXNAS SoC restart driver"
>>   	depends on ARCH_OXNAS
>> diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
>> index 0a39424fc558..d763e6735ee3 100644
>> --- a/drivers/power/reset/Makefile
>> +++ b/drivers/power/reset/Makefile
>> @@ -17,6 +17,7 @@ obj-$(CONFIG_POWER_RESET_MT6323) += mt6323-poweroff.o
>>   obj-$(CONFIG_POWER_RESET_OXNAS) += oxnas-restart.o
>>   obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
>>   obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
>> +obj-$(CONFIG_POWER_RESET_ODROID_GO_ULTRA_POWEROFF) += odroid-go-ultra-poweroff.o
>>   obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o
>>   obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o
>>   obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
>> diff --git a/drivers/power/reset/odroid-go-ultra-poweroff.c b/drivers/power/reset/odroid-go-ultra-poweroff.c
>> new file mode 100644
>> index 000000000000..30a005088fbe
>> --- /dev/null
>> +++ b/drivers/power/reset/odroid-go-ultra-poweroff.c
>> @@ -0,0 +1,193 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Copyright (c) 2023 Neil Armstrong <[e-mail]>
>> + */
>> +#include <linux/kernel.h>
>> +#include <linux/init.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/mfd/rk808.h>
>> +#include <linux/regmap.h>
>> +#include <linux/module.h>
>> +#include <linux/reboot.h>
>> +#include <linux/i2c.h>
>> +
>> +/*
>> + * The Odroid Go Ultra has 2 PMICs:
>> + * - RK818 (manages the battery and USB-C power supply)
>> + * - RK817
>> + * Both PMICs feeds power to the S922X SoC, so they must be powered-off in sequence.
>> + * Vendor does power-off the RK817 first, then the RK818 so here we follow this sequence.
>> + */
>> +
>> +struct odroid_go_ultra_poweroff_data {
>> +	struct device *dev;
>> +	struct device *rk817;
>> +	struct device *rk818;
>> +};
>> +
>> +static int odroid_go_ultra_poweroff_prepare(struct sys_off_data *data)
>> +{
>> +	struct odroid_go_ultra_poweroff_data *poweroff_data = data->cb_data;
>> +	struct regmap *rk817, *rk818;
>> +	int ret;
>> +
>> +	/* RK817 Regmap */
>> +	rk817 = dev_get_regmap(poweroff_data->rk817, NULL);
>> +	if (!rk817) {
>> +		dev_err(poweroff_data->dev, "failed to get rk817 regmap\n");
>> +		return notifier_from_errno(-EINVAL);
>> +	}
>> +
>> +	/* RK818 Regmap */
>> +	rk818 = dev_get_regmap(poweroff_data->rk818, NULL);
>> +	if (!rk818) {
>> +		dev_err(poweroff_data->dev, "failed to get rk818 regmap\n");
>> +		return notifier_from_errno(-EINVAL);
>> +	}
>> +
>> +	dev_info(poweroff_data->dev, "Setting PMICs for power off");
>> +
>> +	/* RK817 */
>> +	ret = regmap_update_bits(rk817, RK817_SYS_CFG(3), DEV_OFF, DEV_OFF);
>> +	if (ret) {
>> +		dev_err(poweroff_data->dev, "failed to poweroff rk817\n");
>> +		return notifier_from_errno(ret);
>> +	}
>> +
>> +	/* RK818 */
>> +	ret = regmap_update_bits(rk818, RK818_DEVCTRL_REG, DEV_OFF, DEV_OFF);
>> +	if (ret) {
>> +		dev_err(poweroff_data->dev, "failed to poweroff rk818\n");
>> +		return notifier_from_errno(ret);
>> +	}
>> +
>> +	return NOTIFY_OK;
>> +}
>> +
>> +static int odroid_go_ultra_poweroff_get_pmic_device(const char *compatible, struct device **pmic)
>> +{
>> +	struct device_node *pmic_node;
>> +	struct i2c_client *pmic_client;
>> +
>> +	pmic_node = of_find_compatible_node(NULL, NULL, compatible);
>> +	if (!pmic_node)
>> +		return -ENODEV;
>> +
>> +	pmic_client = of_find_i2c_device_by_node(pmic_node);
>> +	of_node_put(pmic_node);
>> +	if (!pmic_client)
>> +		return -EPROBE_DEFER;
>> +
>> +	*pmic = &pmic_client->dev;
>> +
>> +	return 0;
>> +}
>> +
>> +static int odroid_go_ultra_poweroff_probe(struct platform_device *pdev)
>> +{
>> +	struct odroid_go_ultra_poweroff_data *poweroff_data;
>> +	int ret;
>> +
>> +	poweroff_data = devm_kzalloc(&pdev->dev, sizeof(*poweroff_data), GFP_KERNEL);
>> +	if (!poweroff_data)
>> +		return -ENOMEM;
>> +
>> +	dev_set_drvdata(&pdev->dev, poweroff_data);
>> +
>> +	/* RK818 PMIC Device */
>> +	ret = odroid_go_ultra_poweroff_get_pmic_device("rockchip,rk818",
>> +						       &poweroff_data->rk818);
>> +	if (ret)
>> +		return dev_err_probe(&pdev->dev, ret, "failed to get rk818 mfd data\n");
>> +
>> +	/* RK817 PMIC Device */
>> +	ret = odroid_go_ultra_poweroff_get_pmic_device("rockchip,rk817",
>> +						       &poweroff_data->rk817);
>> +	if (ret) {
>> +		ret  = dev_err_probe(&pdev->dev, ret, "failed to get rk817 mfd data\n");
>> +		goto put_rk818_device;
>> +	}
>> +
>> +	/* Register as SYS_OFF_MODE_POWER_OFF_PREPARE because regmap_update_bits may sleep */
>> +	ret = devm_register_sys_off_handler(&pdev->dev,
>> +					    SYS_OFF_MODE_POWER_OFF_PREPARE,
>> +					    SYS_OFF_PRIO_DEFAULT,
>> +					    odroid_go_ultra_poweroff_prepare,
>> +					    poweroff_data);
>> +	if (ret) {
>> +		ret = dev_err_probe(&pdev->dev, ret, "failed to register sys-off handler\n");
>> +		goto put_rk817_device;
>> +	}
> 
> Allocating managed resources after a traditional allocation always
> rings an alarm bell. The problem is, that the order at removal time
> will not be the reverse of the allocation chain in this case.
> 
> You can fix this by handling the put_device for rk817 and rk818 via
> devm_add_action_or_reset() (preferred by me) or by switching
> devm_register_sys_off_handler() to register_sys_off_handler.

Good point, I've added a devm_add_action_or_reset() into odroid_go_ultra_poweroff_get_pmic_device()

Thanks,
Neil

> 
> Otherwise the driver LGTM.
> 
> -- Sebastian
> 
>> +
>> +	dev_info(&pdev->dev, "Registered Power-Off handler\n");
>> +
>> +	return 0;
>> +
>> +put_rk817_device:
>> +	put_device(poweroff_data->rk817);
>> +
>> +put_rk818_device:
>> +	put_device(poweroff_data->rk818);
>> +
>> +	return ret;
>> +}
>> +
>> +static int odroid_go_ultra_poweroff_remove(struct platform_device *pdev)
>> +{
>> +	struct odroid_go_ultra_poweroff_data *poweroff_data = dev_get_drvdata(&pdev->dev);
>> +
>> +	put_device(poweroff_data->rk818);
>> +	put_device(poweroff_data->rk817);
>> +
>> +	return 0;
>> +}
>> +
>> +static struct platform_device *pdev;
>> +
>> +static struct platform_driver odroid_go_ultra_poweroff_driver = {
>> +	.driver = {
>> +		.name	= "odroid-go-ultra-poweroff",
>> +	},
>> +	.probe = odroid_go_ultra_poweroff_probe,
>> +	.remove = odroid_go_ultra_poweroff_remove,
>> +};
>> +
>> +static int __init odroid_go_ultra_poweroff_init(void)
>> +{
>> +	int ret;
>> +
>> +	/* Only create when running on the Odroid Go Ultra device */
>> +	if (!of_device_is_compatible(of_root, "hardkernel,odroid-go-ultra"))
>> +		return -ENODEV;
>> +
>> +	ret = platform_driver_register(&odroid_go_ultra_poweroff_driver);
>> +	if (ret)
>> +		return ret;
>> +
>> +	pdev = platform_device_register_resndata(NULL, "odroid-go-ultra-poweroff", -1,
>> +						 NULL, 0, NULL, 0);
>> +
>> +	if (IS_ERR(pdev)) {
>> +		platform_driver_unregister(&odroid_go_ultra_poweroff_driver);
>> +		return PTR_ERR(pdev);
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static void __exit odroid_go_ultra_poweroff_exit(void)
>> +{
>> +	/* Only delete when running on the Odroid Go Ultra device */
>> +	if (!of_device_is_compatible(of_root, "hardkernel,odroid-go-ultra"))
>> +		return;
>> +
>> +	platform_device_unregister(pdev);
>> +	platform_driver_unregister(&odroid_go_ultra_poweroff_driver);
>> +}
>> +
>> +module_init(odroid_go_ultra_poweroff_init);
>> +module_exit(odroid_go_ultra_poweroff_exit);
>> +
>> +MODULE_AUTHOR("Neil Armstrong <[e-mail]>");
>> +MODULE_DESCRIPTION("Odroid Go Ultra poweroff driver");
>> +MODULE_LICENSE("GPL");
>>
>> ---
>> base-commit: 38d2b86a665b5e86371a1a30228bce259aa6c101
>> change-id: 20230126-b4-odroid-go-ultra-poweroff-c8fdca93f3eb
>>
>> Best regards,
>> -- 
>> Neil Armstrong <[e-mail]>
>>

Patch

diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index a8c46ba5878f..a47ef7a9fc13 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -141,6 +141,13 @@  config POWER_RESET_OCELOT_RESET
 	help
 	  This driver supports restart for Microsemi Ocelot SoC and similar.
 
+config POWER_RESET_ODROID_GO_ULTRA_POWEROFF
+	bool "Odroid Go Ultra power-off driver"
+	depends on ARCH_MESON || COMPILE_TEST
+	depends on OF
+	help
+	  This driver supports Power off for Odroid Go Ultra device.
+
 config POWER_RESET_OXNAS
 	bool "OXNAS SoC restart driver"
 	depends on ARCH_OXNAS
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index 0a39424fc558..d763e6735ee3 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -17,6 +17,7 @@  obj-$(CONFIG_POWER_RESET_MT6323) += mt6323-poweroff.o
 obj-$(CONFIG_POWER_RESET_OXNAS) += oxnas-restart.o
 obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
 obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
+obj-$(CONFIG_POWER_RESET_ODROID_GO_ULTRA_POWEROFF) += odroid-go-ultra-poweroff.o
 obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o
 obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o
 obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
diff --git a/drivers/power/reset/odroid-go-ultra-poweroff.c b/drivers/power/reset/odroid-go-ultra-poweroff.c
new file mode 100644
index 000000000000..30a005088fbe
--- /dev/null
+++ b/drivers/power/reset/odroid-go-ultra-poweroff.c
@@ -0,0 +1,193 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2023 Neil Armstrong <[e-mail]>
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <linux/mfd/rk808.h>
+#include <linux/regmap.h>
+#include <linux/module.h>
+#include <linux/reboot.h>
+#include <linux/i2c.h>
+
+/*
+ * The Odroid Go Ultra has 2 PMICs:
+ * - RK818 (manages the battery and USB-C power supply)
+ * - RK817
+ * Both PMICs feeds power to the S922X SoC, so they must be powered-off in sequence.
+ * Vendor does power-off the RK817 first, then the RK818 so here we follow this sequence.
+ */
+
+struct odroid_go_ultra_poweroff_data {
+	struct device *dev;
+	struct device *rk817;
+	struct device *rk818;
+};
+
+static int odroid_go_ultra_poweroff_prepare(struct sys_off_data *data)
+{
+	struct odroid_go_ultra_poweroff_data *poweroff_data = data->cb_data;
+	struct regmap *rk817, *rk818;
+	int ret;
+
+	/* RK817 Regmap */
+	rk817 = dev_get_regmap(poweroff_data->rk817, NULL);
+	if (!rk817) {
+		dev_err(poweroff_data->dev, "failed to get rk817 regmap\n");
+		return notifier_from_errno(-EINVAL);
+	}
+
+	/* RK818 Regmap */
+	rk818 = dev_get_regmap(poweroff_data->rk818, NULL);
+	if (!rk818) {
+		dev_err(poweroff_data->dev, "failed to get rk818 regmap\n");
+		return notifier_from_errno(-EINVAL);
+	}
+
+	dev_info(poweroff_data->dev, "Setting PMICs for power off");
+
+	/* RK817 */
+	ret = regmap_update_bits(rk817, RK817_SYS_CFG(3), DEV_OFF, DEV_OFF);
+	if (ret) {
+		dev_err(poweroff_data->dev, "failed to poweroff rk817\n");
+		return notifier_from_errno(ret);
+	}
+
+	/* RK818 */
+	ret = regmap_update_bits(rk818, RK818_DEVCTRL_REG, DEV_OFF, DEV_OFF);
+	if (ret) {
+		dev_err(poweroff_data->dev, "failed to poweroff rk818\n");
+		return notifier_from_errno(ret);
+	}
+
+	return NOTIFY_OK;
+}
+
+static int odroid_go_ultra_poweroff_get_pmic_device(const char *compatible, struct device **pmic)
+{
+	struct device_node *pmic_node;
+	struct i2c_client *pmic_client;
+
+	pmic_node = of_find_compatible_node(NULL, NULL, compatible);
+	if (!pmic_node)
+		return -ENODEV;
+
+	pmic_client = of_find_i2c_device_by_node(pmic_node);
+	of_node_put(pmic_node);
+	if (!pmic_client)
+		return -EPROBE_DEFER;
+
+	*pmic = &pmic_client->dev;
+
+	return 0;
+}
+
+static int odroid_go_ultra_poweroff_probe(struct platform_device *pdev)
+{
+	struct odroid_go_ultra_poweroff_data *poweroff_data;
+	int ret;
+
+	poweroff_data = devm_kzalloc(&pdev->dev, sizeof(*poweroff_data), GFP_KERNEL);
+	if (!poweroff_data)
+		return -ENOMEM;
+
+	dev_set_drvdata(&pdev->dev, poweroff_data);
+
+	/* RK818 PMIC Device */
+	ret = odroid_go_ultra_poweroff_get_pmic_device("rockchip,rk818",
+						       &poweroff_data->rk818);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret, "failed to get rk818 mfd data\n");
+
+	/* RK817 PMIC Device */
+	ret = odroid_go_ultra_poweroff_get_pmic_device("rockchip,rk817",
+						       &poweroff_data->rk817);
+	if (ret) {
+		ret  = dev_err_probe(&pdev->dev, ret, "failed to get rk817 mfd data\n");
+		goto put_rk818_device;
+	}
+
+	/* Register as SYS_OFF_MODE_POWER_OFF_PREPARE because regmap_update_bits may sleep */
+	ret = devm_register_sys_off_handler(&pdev->dev,
+					    SYS_OFF_MODE_POWER_OFF_PREPARE,
+					    SYS_OFF_PRIO_DEFAULT,
+					    odroid_go_ultra_poweroff_prepare,
+					    poweroff_data);
+	if (ret) {
+		ret = dev_err_probe(&pdev->dev, ret, "failed to register sys-off handler\n");
+		goto put_rk817_device;
+	}
+
+	dev_info(&pdev->dev, "Registered Power-Off handler\n");
+
+	return 0;
+
+put_rk817_device:
+	put_device(poweroff_data->rk817);
+
+put_rk818_device:
+	put_device(poweroff_data->rk818);
+
+	return ret;
+}
+
+static int odroid_go_ultra_poweroff_remove(struct platform_device *pdev)
+{
+	struct odroid_go_ultra_poweroff_data *poweroff_data = dev_get_drvdata(&pdev->dev);
+
+	put_device(poweroff_data->rk818);
+	put_device(poweroff_data->rk817);
+
+	return 0;
+}
+
+static struct platform_device *pdev;
+
+static struct platform_driver odroid_go_ultra_poweroff_driver = {
+	.driver = {
+		.name	= "odroid-go-ultra-poweroff",
+	},
+	.probe = odroid_go_ultra_poweroff_probe,
+	.remove = odroid_go_ultra_poweroff_remove,
+};
+
+static int __init odroid_go_ultra_poweroff_init(void)
+{
+	int ret;
+
+	/* Only create when running on the Odroid Go Ultra device */
+	if (!of_device_is_compatible(of_root, "hardkernel,odroid-go-ultra"))
+		return -ENODEV;
+
+	ret = platform_driver_register(&odroid_go_ultra_poweroff_driver);
+	if (ret)
+		return ret;
+
+	pdev = platform_device_register_resndata(NULL, "odroid-go-ultra-poweroff", -1,
+						 NULL, 0, NULL, 0);
+
+	if (IS_ERR(pdev)) {
+		platform_driver_unregister(&odroid_go_ultra_poweroff_driver);
+		return PTR_ERR(pdev);
+	}
+
+	return 0;
+}
+
+static void __exit odroid_go_ultra_poweroff_exit(void)
+{
+	/* Only delete when running on the Odroid Go Ultra device */
+	if (!of_device_is_compatible(of_root, "hardkernel,odroid-go-ultra"))
+		return;
+
+	platform_device_unregister(pdev);
+	platform_driver_unregister(&odroid_go_ultra_poweroff_driver);
+}
+
+module_init(odroid_go_ultra_poweroff_init);
+module_exit(odroid_go_ultra_poweroff_exit);
+
+MODULE_AUTHOR("Neil Armstrong <[e-mail]>");
+MODULE_DESCRIPTION("Odroid Go Ultra poweroff driver");
+MODULE_LICENSE("GPL");