| Message ID | 20230126150026.14590-1-ansuelsmth@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | viresh kumar |
| Headers | show |
| Series | [v4,1/3] dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional | expand |
On Thu, Jan 26, 2023 at 04:05:46PM -0600, Rob Herring wrote: > > On Thu, 26 Jan 2023 16:00:24 +0100, Christian Marangi wrote: > > The qcom-cpufreq-nvmem driver supports 2 kind of devices: > > - pre-cpr that doesn't have power-domains and base everything on nvmem > > cells and multiple named microvolt bindings. > > Doesn't need required-opp binding in the opp nodes as they are only > > used for genpd based devices. > > - cpr-based that require power-domain in the cpu nodes and use various > > source to decide the correct voltage and freq > > Require required-opp binding since they need to be linked to the > > related opp-level. > > > > When the schema was introduced, it was wrongly set to always require these > > binding but this is not the case for pre-cpr devices. > > > > Make the power-domain and the required-opp optional and set them required > > only for qcs404 based devices. > > > > Fixes: ec24d1d55469 ("dt-bindings: opp: Convert qcom-nvmem-cpufreq to DT schema") > > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> > > --- > > Changes v4: > > - Explain why required-opp needs to be conditional > > - Split additional ref part > > Changesv3: > > - No change > > Changes v2: > > - Reword commit description > > - Fix condition order > > - Add allOf > > > > .../bindings/cpufreq/qcom-cpufreq-nvmem.yaml | 62 +++++++++++-------- > > 1 file changed, 37 insertions(+), 25 deletions(-) > > > > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml: 'anyOf' conditional failed, one must be fixed: > 'type' is a required property > 'properties' is a required property > 'patternProperties' is a required property > hint: 'additionalProperties' depends on 'properties' or 'patternProperties' > from schema $id: http://devicetree.org/meta-schemas/keywords.yaml# > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml: 'anyOf' conditional failed, one must be fixed: > 'properties' is a required property > 'patternProperties' is a required property > hint: Metaschema for devicetree binding documentation > from schema $id: http://devicetree.org/meta-schemas/core.yaml# > > doc reference errors (make refcheckdocs): > > See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230126150026.14590-1-ansuelsmth@gmail.com > > The base for the series is generally the latest rc1. A different dependency > should be noted in *this* patch. > > If you already ran 'make dt_binding_check' and didn't see the above > error(s), then make sure 'yamllint' is installed and dt-schema is up to > date: > > pip3 install dtschema --upgrade > > Please check and re-submit after running the above command yourself. Note > that DT_SCHEMA_FILES can be set to your schema file to speed up checking > your schema. However, it must be unset to test all examples with your schema. > Hi, Rob, was aware of this error but it was expected from the split of patches. (since i made each part of the patch conditional the check complain for no binding defined) If we really want I can send v5 that should fix this bisect problem by swapping patch 1 with patch 2 and rebasing. I already have that ready and fix this bisect error.
On Thu, 26 Jan 2023 16:00:24 +0100, Christian Marangi wrote: > The qcom-cpufreq-nvmem driver supports 2 kind of devices: > - pre-cpr that doesn't have power-domains and base everything on nvmem > cells and multiple named microvolt bindings. > Doesn't need required-opp binding in the opp nodes as they are only > used for genpd based devices. > - cpr-based that require power-domain in the cpu nodes and use various > source to decide the correct voltage and freq > Require required-opp binding since they need to be linked to the > related opp-level. > > When the schema was introduced, it was wrongly set to always require these > binding but this is not the case for pre-cpr devices. > > Make the power-domain and the required-opp optional and set them required > only for qcs404 based devices. > > Fixes: ec24d1d55469 ("dt-bindings: opp: Convert qcom-nvmem-cpufreq to DT schema") > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> > --- > Changes v4: > - Explain why required-opp needs to be conditional > - Split additional ref part > Changesv3: > - No change > Changes v2: > - Reword commit description > - Fix condition order > - Add allOf > > .../bindings/cpufreq/qcom-cpufreq-nvmem.yaml | 62 +++++++++++-------- > 1 file changed, 37 insertions(+), 25 deletions(-) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml: 'anyOf' conditional failed, one must be fixed: 'type' is a required property 'properties' is a required property 'patternProperties' is a required property hint: 'additionalProperties' depends on 'properties' or 'patternProperties' from schema $id: http://devicetree.org/meta-schemas/keywords.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml: 'anyOf' conditional failed, one must be fixed: 'properties' is a required property 'patternProperties' is a required property hint: Metaschema for devicetree binding documentation from schema $id: http://devicetree.org/meta-schemas/core.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230126150026.14590-1-ansuelsmth@gmail.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
diff --git a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml index 9c086eac6ca7..89e99a198281 100644 --- a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml +++ b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml @@ -17,6 +17,9 @@ description: | on the CPU OPP in use. The CPUFreq driver sets the CPR power domain level according to the required OPPs defined in the CPU OPP tables. + For old implementation efuses are parsed to select the correct opp table and + voltage and CPR is not supported/used. + select: properties: compatible: @@ -33,37 +36,46 @@ select: required: - compatible -properties: - cpus: - type: object +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,qcs404 - patternProperties: - '^cpu@[0-9a-f]+$': - type: object + then: + properties: + cpus: + type: object - properties: - power-domains: - maxItems: 1 + patternProperties: + '^cpu@[0-9a-f]+$': + type: object - power-domain-names: - items: - - const: cpr + properties: + power-domains: + maxItems: 1 - required: - - power-domains - - power-domain-names + power-domain-names: + items: + - const: cpr + + required: + - power-domains + - power-domain-names -patternProperties: - '^opp-table(-[a-z0-9]+)?$': - if: - properties: - compatible: - const: operating-points-v2-kryo-cpu - then: patternProperties: - '^opp-?[0-9]+$': - required: - - required-opps + '^opp-table(-[a-z0-9]+)?$': + if: + properties: + compatible: + const: operating-points-v2-kryo-cpu + then: + patternProperties: + '^opp-?[0-9]+$': + required: + - required-opps additionalProperties: true
The qcom-cpufreq-nvmem driver supports 2 kind of devices: - pre-cpr that doesn't have power-domains and base everything on nvmem cells and multiple named microvolt bindings. Doesn't need required-opp binding in the opp nodes as they are only used for genpd based devices. - cpr-based that require power-domain in the cpu nodes and use various source to decide the correct voltage and freq Require required-opp binding since they need to be linked to the related opp-level. When the schema was introduced, it was wrongly set to always require these binding but this is not the case for pre-cpr devices. Make the power-domain and the required-opp optional and set them required only for qcs404 based devices. Fixes: ec24d1d55469 ("dt-bindings: opp: Convert qcom-nvmem-cpufreq to DT schema") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> --- Changes v4: - Explain why required-opp needs to be conditional - Split additional ref part Changesv3: - No change Changes v2: - Reword commit description - Fix condition order - Add allOf .../bindings/cpufreq/qcom-cpufreq-nvmem.yaml | 62 +++++++++++-------- 1 file changed, 37 insertions(+), 25 deletions(-)