| Message ID | 20230330104526.3196-1-rui.zhang@intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Daniel Lezcano |
| Headers | show |
| Series | thermal/core: Remove thermal_bind_params structure | expand |
Hi Rui, On 30/03/2023 12:45, Zhang Rui wrote: > Remove struct thermal_bind_params because no one is using it for thermal > binding now. > > Signed-off-by: Zhang Rui <rui.zhang@intel.com> Thanks for the cleanup, always good to remove unused code. Rafael, is it fine if I pick it ? > --- > .../driver-api/thermal/sysfs-api.rst | 40 ------ > drivers/thermal/thermal_core.c | 129 ++---------------- > include/linux/thermal.h | 38 ------ > 3 files changed, 11 insertions(+), 196 deletions(-) > > diff --git a/Documentation/driver-api/thermal/sysfs-api.rst b/Documentation/driver-api/thermal/sysfs-api.rst > index 2e0f79a9e2ee..6c1175c6afba 100644 > --- a/Documentation/driver-api/thermal/sysfs-api.rst > +++ b/Documentation/driver-api/thermal/sysfs-api.rst > @@ -304,42 +304,6 @@ temperature) and throttle appropriate devices. > 1.4 Thermal Zone Parameters > --------------------------- > > - :: > - > - struct thermal_bind_params > - > - This structure defines the following parameters that are used to bind > - a zone with a cooling device for a particular trip point. > - > - .cdev: > - The cooling device pointer > - .weight: > - The 'influence' of a particular cooling device on this > - zone. This is relative to the rest of the cooling > - devices. For example, if all cooling devices have a > - weight of 1, then they all contribute the same. You can > - use percentages if you want, but it's not mandatory. A > - weight of 0 means that this cooling device doesn't > - contribute to the cooling of this zone unless all cooling > - devices have a weight of 0. If all weights are 0, then > - they all contribute the same. > - .trip_mask: > - This is a bit mask that gives the binding relation between > - this thermal zone and cdev, for a particular trip point. > - If nth bit is set, then the cdev and thermal zone are bound > - for trip point n. > - .binding_limits: > - This is an array of cooling state limits. Must have > - exactly 2 * thermal_zone.number_of_trip_points. It is an > - array consisting of tuples <lower-state upper-state> of > - state limits. Each trip will be associated with one state > - limit tuple when binding. A NULL pointer means > - <THERMAL_NO_LIMITS THERMAL_NO_LIMITS> on all trips. > - These limits are used when binding a cdev to a trip point. > - .match: > - This call back returns success(0) if the 'tz and cdev' need to > - be bound, as per platform data. > - > :: > > struct thermal_zone_params > @@ -357,10 +321,6 @@ temperature) and throttle appropriate devices. > will be created. when no_hwmon == true, nothing will be done. > In case the thermal_zone_params is NULL, the hwmon interface > will be created (for backward compatibility). > - .num_tbps: > - Number of thermal_bind_params entries for this zone > - .tbp: > - thermal_bind_params entries > > 2. sysfs attributes structure > ============================= > diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c > index d51cacd66756..2e6a49dd527d 100644 > --- a/drivers/thermal/thermal_core.c > +++ b/drivers/thermal/thermal_core.c > @@ -794,64 +794,18 @@ void print_bind_err_msg(struct thermal_zone_device *tz, > tz->type, cdev->type, ret); > } > > -static void __bind(struct thermal_zone_device *tz, int mask, > - struct thermal_cooling_device *cdev, > - unsigned long *limits, > - unsigned int weight) > -{ > - int i, ret; > - > - for (i = 0; i < tz->num_trips; i++) { > - if (mask & (1 << i)) { > - unsigned long upper, lower; > - > - upper = THERMAL_NO_LIMIT; > - lower = THERMAL_NO_LIMIT; > - if (limits) { > - lower = limits[i * 2]; > - upper = limits[i * 2 + 1]; > - } > - ret = thermal_zone_bind_cooling_device(tz, i, cdev, > - upper, lower, > - weight); > - if (ret) > - print_bind_err_msg(tz, cdev, ret); > - } > - } > -} > - > static void bind_cdev(struct thermal_cooling_device *cdev) > { > - int i, ret; > - const struct thermal_zone_params *tzp; > + int ret; > struct thermal_zone_device *pos = NULL; > > mutex_lock(&thermal_list_lock); > > list_for_each_entry(pos, &thermal_tz_list, node) { > - if (!pos->tzp && !pos->ops->bind) > - continue; > - > if (pos->ops->bind) { > ret = pos->ops->bind(pos, cdev); > if (ret) > print_bind_err_msg(pos, cdev, ret); > - continue; > - } > - > - tzp = pos->tzp; > - if (!tzp || !tzp->tbp) > - continue; > - > - for (i = 0; i < tzp->num_tbps; i++) { > - if (tzp->tbp[i].cdev || !tzp->tbp[i].match) > - continue; > - if (tzp->tbp[i].match(pos, cdev)) > - continue; > - tzp->tbp[i].cdev = cdev; > - __bind(pos, tzp->tbp[i].trip_mask, cdev, > - tzp->tbp[i].binding_limits, > - tzp->tbp[i].weight); > } > } > > @@ -1138,16 +1092,6 @@ void thermal_cooling_device_update(struct thermal_cooling_device *cdev) > } > EXPORT_SYMBOL_GPL(thermal_cooling_device_update); > > -static void __unbind(struct thermal_zone_device *tz, int mask, > - struct thermal_cooling_device *cdev) > -{ > - int i; > - > - for (i = 0; i < tz->num_trips; i++) > - if (mask & (1 << i)) > - thermal_zone_unbind_cooling_device(tz, i, cdev); > -} > - > /** > * thermal_cooling_device_unregister - removes a thermal cooling device > * @cdev: the thermal cooling device to remove. > @@ -1157,8 +1101,6 @@ static void __unbind(struct thermal_zone_device *tz, int mask, > */ > void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev) > { > - int i; > - const struct thermal_zone_params *tzp; > struct thermal_zone_device *tz; > > if (!cdev) > @@ -1175,21 +1117,8 @@ void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev) > > /* Unbind all thermal zones associated with 'this' cdev */ > list_for_each_entry(tz, &thermal_tz_list, node) { > - if (tz->ops->unbind) { > + if (tz->ops->unbind) > tz->ops->unbind(tz, cdev); > - continue; > - } > - > - if (!tz->tzp || !tz->tzp->tbp) > - continue; > - > - tzp = tz->tzp; > - for (i = 0; i < tzp->num_tbps; i++) { > - if (tzp->tbp[i].cdev == cdev) { > - __unbind(tz, tzp->tbp[i].trip_mask, cdev); > - tzp->tbp[i].cdev = NULL; > - } > - } > } > > mutex_unlock(&thermal_list_lock); > @@ -1200,41 +1129,20 @@ EXPORT_SYMBOL_GPL(thermal_cooling_device_unregister); > > static void bind_tz(struct thermal_zone_device *tz) > { > - int i, ret; > + int ret; > struct thermal_cooling_device *pos = NULL; > - const struct thermal_zone_params *tzp = tz->tzp; > > - if (!tzp && !tz->ops->bind) > + if (!tz->ops->bind) > return; > > mutex_lock(&thermal_list_lock); > > - /* If there is ops->bind, try to use ops->bind */ > - if (tz->ops->bind) { > - list_for_each_entry(pos, &thermal_cdev_list, node) { > - ret = tz->ops->bind(tz, pos); > - if (ret) > - print_bind_err_msg(tz, pos, ret); > - } > - goto exit; > - } > - > - if (!tzp || !tzp->tbp) > - goto exit; > - > list_for_each_entry(pos, &thermal_cdev_list, node) { > - for (i = 0; i < tzp->num_tbps; i++) { > - if (tzp->tbp[i].cdev || !tzp->tbp[i].match) > - continue; > - if (tzp->tbp[i].match(tz, pos)) > - continue; > - tzp->tbp[i].cdev = pos; > - __bind(tz, tzp->tbp[i].trip_mask, pos, > - tzp->tbp[i].binding_limits, > - tzp->tbp[i].weight); > - } > + ret = tz->ops->bind(tz, pos); > + if (ret) > + print_bind_err_msg(tz, pos, ret); > } > -exit: > + > mutex_unlock(&thermal_list_lock); > } > > @@ -1491,15 +1399,13 @@ EXPORT_SYMBOL_GPL(thermal_zone_device_id); > */ > void thermal_zone_device_unregister(struct thermal_zone_device *tz) > { > - int i, tz_id; > - const struct thermal_zone_params *tzp; > + int tz_id; > struct thermal_cooling_device *cdev; > struct thermal_zone_device *pos = NULL; > > if (!tz) > return; > > - tzp = tz->tzp; > tz_id = tz->id; > > mutex_lock(&thermal_list_lock); > @@ -1514,22 +1420,9 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) > list_del(&tz->node); > > /* Unbind all cdevs associated with 'this' thermal zone */ > - list_for_each_entry(cdev, &thermal_cdev_list, node) { > - if (tz->ops->unbind) { > + list_for_each_entry(cdev, &thermal_cdev_list, node) > + if (tz->ops->unbind) > tz->ops->unbind(tz, cdev); > - continue; > - } > - > - if (!tzp || !tzp->tbp) > - break; > - > - for (i = 0; i < tzp->num_tbps; i++) { > - if (tzp->tbp[i].cdev == cdev) { > - __unbind(tz, tzp->tbp[i].trip_mask, cdev); > - tzp->tbp[i].cdev = NULL; > - } > - } > - } > > mutex_unlock(&thermal_list_lock); > > diff --git a/include/linux/thermal.h b/include/linux/thermal.h > index fef625f799ae..ab7460bfdcf6 100644 > --- a/include/linux/thermal.h > +++ b/include/linux/thermal.h > @@ -207,41 +207,6 @@ struct thermal_governor { > struct list_head governor_list; > }; > > -/* Structure that holds binding parameters for a zone */ > -struct thermal_bind_params { > - struct thermal_cooling_device *cdev; > - > - /* > - * This is a measure of 'how effectively these devices can > - * cool 'this' thermal zone. It shall be determined by > - * platform characterization. This value is relative to the > - * rest of the weights so a cooling device whose weight is > - * double that of another cooling device is twice as > - * effective. See Documentation/driver-api/thermal/sysfs-api.rst for more > - * information. > - */ > - int weight; > - > - /* > - * This is a bit mask that gives the binding relation between this > - * thermal zone and cdev, for a particular trip point. > - * See Documentation/driver-api/thermal/sysfs-api.rst for more information. > - */ > - int trip_mask; > - > - /* > - * This is an array of cooling state limits. Must have exactly > - * 2 * thermal_zone.number_of_trip_points. It is an array consisting > - * of tuples <lower-state upper-state> of state limits. Each trip > - * will be associated with one state limit tuple when binding. > - * A NULL pointer means <THERMAL_NO_LIMITS THERMAL_NO_LIMITS> > - * on all trips. > - */ > - unsigned long *binding_limits; > - int (*match) (struct thermal_zone_device *tz, > - struct thermal_cooling_device *cdev); > -}; > - > /* Structure to define Thermal Zone parameters */ > struct thermal_zone_params { > char governor_name[THERMAL_NAME_LENGTH]; > @@ -253,9 +218,6 @@ struct thermal_zone_params { > */ > bool no_hwmon; > > - int num_tbps; /* Number of tbp entries */ > - struct thermal_bind_params *tbp; > - > /* > * Sustainable power (heat) that this thermal zone can dissipate in > * mW
On Fri, Mar 31, 2023 at 10:49 AM Daniel Lezcano <daniel.lezcano@linaro.org> wrote: > > > Hi Rui, > > > On 30/03/2023 12:45, Zhang Rui wrote: > > Remove struct thermal_bind_params because no one is using it for thermal > > binding now. > > > > Signed-off-by: Zhang Rui <rui.zhang@intel.com> > > Thanks for the cleanup, always good to remove unused code. > > Rafael, is it fine if I pick it ? Sure, no problem. > > > --- > > .../driver-api/thermal/sysfs-api.rst | 40 ------ > > drivers/thermal/thermal_core.c | 129 ++---------------- > > include/linux/thermal.h | 38 ------ > > 3 files changed, 11 insertions(+), 196 deletions(-) > > > > diff --git a/Documentation/driver-api/thermal/sysfs-api.rst b/Documentation/driver-api/thermal/sysfs-api.rst > > index 2e0f79a9e2ee..6c1175c6afba 100644 > > --- a/Documentation/driver-api/thermal/sysfs-api.rst > > +++ b/Documentation/driver-api/thermal/sysfs-api.rst > > @@ -304,42 +304,6 @@ temperature) and throttle appropriate devices. > > 1.4 Thermal Zone Parameters > > --------------------------- > > > > - :: > > - > > - struct thermal_bind_params > > - > > - This structure defines the following parameters that are used to bind > > - a zone with a cooling device for a particular trip point. > > - > > - .cdev: > > - The cooling device pointer > > - .weight: > > - The 'influence' of a particular cooling device on this > > - zone. This is relative to the rest of the cooling > > - devices. For example, if all cooling devices have a > > - weight of 1, then they all contribute the same. You can > > - use percentages if you want, but it's not mandatory. A > > - weight of 0 means that this cooling device doesn't > > - contribute to the cooling of this zone unless all cooling > > - devices have a weight of 0. If all weights are 0, then > > - they all contribute the same. > > - .trip_mask: > > - This is a bit mask that gives the binding relation between > > - this thermal zone and cdev, for a particular trip point. > > - If nth bit is set, then the cdev and thermal zone are bound > > - for trip point n. > > - .binding_limits: > > - This is an array of cooling state limits. Must have > > - exactly 2 * thermal_zone.number_of_trip_points. It is an > > - array consisting of tuples <lower-state upper-state> of > > - state limits. Each trip will be associated with one state > > - limit tuple when binding. A NULL pointer means > > - <THERMAL_NO_LIMITS THERMAL_NO_LIMITS> on all trips. > > - These limits are used when binding a cdev to a trip point. > > - .match: > > - This call back returns success(0) if the 'tz and cdev' need to > > - be bound, as per platform data. > > - > > :: > > > > struct thermal_zone_params > > @@ -357,10 +321,6 @@ temperature) and throttle appropriate devices. > > will be created. when no_hwmon == true, nothing will be done. > > In case the thermal_zone_params is NULL, the hwmon interface > > will be created (for backward compatibility). > > - .num_tbps: > > - Number of thermal_bind_params entries for this zone > > - .tbp: > > - thermal_bind_params entries > > > > 2. sysfs attributes structure > > ============================= > > diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c > > index d51cacd66756..2e6a49dd527d 100644 > > --- a/drivers/thermal/thermal_core.c > > +++ b/drivers/thermal/thermal_core.c > > @@ -794,64 +794,18 @@ void print_bind_err_msg(struct thermal_zone_device *tz, > > tz->type, cdev->type, ret); > > } > > > > -static void __bind(struct thermal_zone_device *tz, int mask, > > - struct thermal_cooling_device *cdev, > > - unsigned long *limits, > > - unsigned int weight) > > -{ > > - int i, ret; > > - > > - for (i = 0; i < tz->num_trips; i++) { > > - if (mask & (1 << i)) { > > - unsigned long upper, lower; > > - > > - upper = THERMAL_NO_LIMIT; > > - lower = THERMAL_NO_LIMIT; > > - if (limits) { > > - lower = limits[i * 2]; > > - upper = limits[i * 2 + 1]; > > - } > > - ret = thermal_zone_bind_cooling_device(tz, i, cdev, > > - upper, lower, > > - weight); > > - if (ret) > > - print_bind_err_msg(tz, cdev, ret); > > - } > > - } > > -} > > - > > static void bind_cdev(struct thermal_cooling_device *cdev) > > { > > - int i, ret; > > - const struct thermal_zone_params *tzp; > > + int ret; > > struct thermal_zone_device *pos = NULL; > > > > mutex_lock(&thermal_list_lock); > > > > list_for_each_entry(pos, &thermal_tz_list, node) { > > - if (!pos->tzp && !pos->ops->bind) > > - continue; > > - > > if (pos->ops->bind) { > > ret = pos->ops->bind(pos, cdev); > > if (ret) > > print_bind_err_msg(pos, cdev, ret); > > - continue; > > - } > > - > > - tzp = pos->tzp; > > - if (!tzp || !tzp->tbp) > > - continue; > > - > > - for (i = 0; i < tzp->num_tbps; i++) { > > - if (tzp->tbp[i].cdev || !tzp->tbp[i].match) > > - continue; > > - if (tzp->tbp[i].match(pos, cdev)) > > - continue; > > - tzp->tbp[i].cdev = cdev; > > - __bind(pos, tzp->tbp[i].trip_mask, cdev, > > - tzp->tbp[i].binding_limits, > > - tzp->tbp[i].weight); > > } > > } > > > > @@ -1138,16 +1092,6 @@ void thermal_cooling_device_update(struct thermal_cooling_device *cdev) > > } > > EXPORT_SYMBOL_GPL(thermal_cooling_device_update); > > > > -static void __unbind(struct thermal_zone_device *tz, int mask, > > - struct thermal_cooling_device *cdev) > > -{ > > - int i; > > - > > - for (i = 0; i < tz->num_trips; i++) > > - if (mask & (1 << i)) > > - thermal_zone_unbind_cooling_device(tz, i, cdev); > > -} > > - > > /** > > * thermal_cooling_device_unregister - removes a thermal cooling device > > * @cdev: the thermal cooling device to remove. > > @@ -1157,8 +1101,6 @@ static void __unbind(struct thermal_zone_device *tz, int mask, > > */ > > void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev) > > { > > - int i; > > - const struct thermal_zone_params *tzp; > > struct thermal_zone_device *tz; > > > > if (!cdev) > > @@ -1175,21 +1117,8 @@ void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev) > > > > /* Unbind all thermal zones associated with 'this' cdev */ > > list_for_each_entry(tz, &thermal_tz_list, node) { > > - if (tz->ops->unbind) { > > + if (tz->ops->unbind) > > tz->ops->unbind(tz, cdev); > > - continue; > > - } > > - > > - if (!tz->tzp || !tz->tzp->tbp) > > - continue; > > - > > - tzp = tz->tzp; > > - for (i = 0; i < tzp->num_tbps; i++) { > > - if (tzp->tbp[i].cdev == cdev) { > > - __unbind(tz, tzp->tbp[i].trip_mask, cdev); > > - tzp->tbp[i].cdev = NULL; > > - } > > - } > > } > > > > mutex_unlock(&thermal_list_lock); > > @@ -1200,41 +1129,20 @@ EXPORT_SYMBOL_GPL(thermal_cooling_device_unregister); > > > > static void bind_tz(struct thermal_zone_device *tz) > > { > > - int i, ret; > > + int ret; > > struct thermal_cooling_device *pos = NULL; > > - const struct thermal_zone_params *tzp = tz->tzp; > > > > - if (!tzp && !tz->ops->bind) > > + if (!tz->ops->bind) > > return; > > > > mutex_lock(&thermal_list_lock); > > > > - /* If there is ops->bind, try to use ops->bind */ > > - if (tz->ops->bind) { > > - list_for_each_entry(pos, &thermal_cdev_list, node) { > > - ret = tz->ops->bind(tz, pos); > > - if (ret) > > - print_bind_err_msg(tz, pos, ret); > > - } > > - goto exit; > > - } > > - > > - if (!tzp || !tzp->tbp) > > - goto exit; > > - > > list_for_each_entry(pos, &thermal_cdev_list, node) { > > - for (i = 0; i < tzp->num_tbps; i++) { > > - if (tzp->tbp[i].cdev || !tzp->tbp[i].match) > > - continue; > > - if (tzp->tbp[i].match(tz, pos)) > > - continue; > > - tzp->tbp[i].cdev = pos; > > - __bind(tz, tzp->tbp[i].trip_mask, pos, > > - tzp->tbp[i].binding_limits, > > - tzp->tbp[i].weight); > > - } > > + ret = tz->ops->bind(tz, pos); > > + if (ret) > > + print_bind_err_msg(tz, pos, ret); > > } > > -exit: > > + > > mutex_unlock(&thermal_list_lock); > > } > > > > @@ -1491,15 +1399,13 @@ EXPORT_SYMBOL_GPL(thermal_zone_device_id); > > */ > > void thermal_zone_device_unregister(struct thermal_zone_device *tz) > > { > > - int i, tz_id; > > - const struct thermal_zone_params *tzp; > > + int tz_id; > > struct thermal_cooling_device *cdev; > > struct thermal_zone_device *pos = NULL; > > > > if (!tz) > > return; > > > > - tzp = tz->tzp; > > tz_id = tz->id; > > > > mutex_lock(&thermal_list_lock); > > @@ -1514,22 +1420,9 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) > > list_del(&tz->node); > > > > /* Unbind all cdevs associated with 'this' thermal zone */ > > - list_for_each_entry(cdev, &thermal_cdev_list, node) { > > - if (tz->ops->unbind) { > > + list_for_each_entry(cdev, &thermal_cdev_list, node) > > + if (tz->ops->unbind) > > tz->ops->unbind(tz, cdev); > > - continue; > > - } > > - > > - if (!tzp || !tzp->tbp) > > - break; > > - > > - for (i = 0; i < tzp->num_tbps; i++) { > > - if (tzp->tbp[i].cdev == cdev) { > > - __unbind(tz, tzp->tbp[i].trip_mask, cdev); > > - tzp->tbp[i].cdev = NULL; > > - } > > - } > > - } > > > > mutex_unlock(&thermal_list_lock); > > > > diff --git a/include/linux/thermal.h b/include/linux/thermal.h > > index fef625f799ae..ab7460bfdcf6 100644 > > --- a/include/linux/thermal.h > > +++ b/include/linux/thermal.h > > @@ -207,41 +207,6 @@ struct thermal_governor { > > struct list_head governor_list; > > }; > > > > -/* Structure that holds binding parameters for a zone */ > > -struct thermal_bind_params { > > - struct thermal_cooling_device *cdev; > > - > > - /* > > - * This is a measure of 'how effectively these devices can > > - * cool 'this' thermal zone. It shall be determined by > > - * platform characterization. This value is relative to the > > - * rest of the weights so a cooling device whose weight is > > - * double that of another cooling device is twice as > > - * effective. See Documentation/driver-api/thermal/sysfs-api.rst for more > > - * information. > > - */ > > - int weight; > > - > > - /* > > - * This is a bit mask that gives the binding relation between this > > - * thermal zone and cdev, for a particular trip point. > > - * See Documentation/driver-api/thermal/sysfs-api.rst for more information. > > - */ > > - int trip_mask; > > - > > - /* > > - * This is an array of cooling state limits. Must have exactly > > - * 2 * thermal_zone.number_of_trip_points. It is an array consisting > > - * of tuples <lower-state upper-state> of state limits. Each trip > > - * will be associated with one state limit tuple when binding. > > - * A NULL pointer means <THERMAL_NO_LIMITS THERMAL_NO_LIMITS> > > - * on all trips. > > - */ > > - unsigned long *binding_limits; > > - int (*match) (struct thermal_zone_device *tz, > > - struct thermal_cooling_device *cdev); > > -}; > > - > > /* Structure to define Thermal Zone parameters */ > > struct thermal_zone_params { > > char governor_name[THERMAL_NAME_LENGTH]; > > @@ -253,9 +218,6 @@ struct thermal_zone_params { > > */ > > bool no_hwmon; > > > > - int num_tbps; /* Number of tbp entries */ > > - struct thermal_bind_params *tbp; > > - > > /* > > * Sustainable power (heat) that this thermal zone can dissipate in > > * mW > > -- > <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs > > Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | > <http://twitter.com/#!/linaroorg> Twitter | > <http://www.linaro.org/linaro-blog/> Blog >
diff --git a/Documentation/driver-api/thermal/sysfs-api.rst b/Documentation/driver-api/thermal/sysfs-api.rst index 2e0f79a9e2ee..6c1175c6afba 100644 --- a/Documentation/driver-api/thermal/sysfs-api.rst +++ b/Documentation/driver-api/thermal/sysfs-api.rst @@ -304,42 +304,6 @@ temperature) and throttle appropriate devices. 1.4 Thermal Zone Parameters --------------------------- - :: - - struct thermal_bind_params - - This structure defines the following parameters that are used to bind - a zone with a cooling device for a particular trip point. - - .cdev: - The cooling device pointer - .weight: - The 'influence' of a particular cooling device on this - zone. This is relative to the rest of the cooling - devices. For example, if all cooling devices have a - weight of 1, then they all contribute the same. You can - use percentages if you want, but it's not mandatory. A - weight of 0 means that this cooling device doesn't - contribute to the cooling of this zone unless all cooling - devices have a weight of 0. If all weights are 0, then - they all contribute the same. - .trip_mask: - This is a bit mask that gives the binding relation between - this thermal zone and cdev, for a particular trip point. - If nth bit is set, then the cdev and thermal zone are bound - for trip point n. - .binding_limits: - This is an array of cooling state limits. Must have - exactly 2 * thermal_zone.number_of_trip_points. It is an - array consisting of tuples <lower-state upper-state> of - state limits. Each trip will be associated with one state - limit tuple when binding. A NULL pointer means - <THERMAL_NO_LIMITS THERMAL_NO_LIMITS> on all trips. - These limits are used when binding a cdev to a trip point. - .match: - This call back returns success(0) if the 'tz and cdev' need to - be bound, as per platform data. - :: struct thermal_zone_params @@ -357,10 +321,6 @@ temperature) and throttle appropriate devices. will be created. when no_hwmon == true, nothing will be done. In case the thermal_zone_params is NULL, the hwmon interface will be created (for backward compatibility). - .num_tbps: - Number of thermal_bind_params entries for this zone - .tbp: - thermal_bind_params entries 2. sysfs attributes structure ============================= diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index d51cacd66756..2e6a49dd527d 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -794,64 +794,18 @@ void print_bind_err_msg(struct thermal_zone_device *tz, tz->type, cdev->type, ret); } -static void __bind(struct thermal_zone_device *tz, int mask, - struct thermal_cooling_device *cdev, - unsigned long *limits, - unsigned int weight) -{ - int i, ret; - - for (i = 0; i < tz->num_trips; i++) { - if (mask & (1 << i)) { - unsigned long upper, lower; - - upper = THERMAL_NO_LIMIT; - lower = THERMAL_NO_LIMIT; - if (limits) { - lower = limits[i * 2]; - upper = limits[i * 2 + 1]; - } - ret = thermal_zone_bind_cooling_device(tz, i, cdev, - upper, lower, - weight); - if (ret) - print_bind_err_msg(tz, cdev, ret); - } - } -} - static void bind_cdev(struct thermal_cooling_device *cdev) { - int i, ret; - const struct thermal_zone_params *tzp; + int ret; struct thermal_zone_device *pos = NULL; mutex_lock(&thermal_list_lock); list_for_each_entry(pos, &thermal_tz_list, node) { - if (!pos->tzp && !pos->ops->bind) - continue; - if (pos->ops->bind) { ret = pos->ops->bind(pos, cdev); if (ret) print_bind_err_msg(pos, cdev, ret); - continue; - } - - tzp = pos->tzp; - if (!tzp || !tzp->tbp) - continue; - - for (i = 0; i < tzp->num_tbps; i++) { - if (tzp->tbp[i].cdev || !tzp->tbp[i].match) - continue; - if (tzp->tbp[i].match(pos, cdev)) - continue; - tzp->tbp[i].cdev = cdev; - __bind(pos, tzp->tbp[i].trip_mask, cdev, - tzp->tbp[i].binding_limits, - tzp->tbp[i].weight); } } @@ -1138,16 +1092,6 @@ void thermal_cooling_device_update(struct thermal_cooling_device *cdev) } EXPORT_SYMBOL_GPL(thermal_cooling_device_update); -static void __unbind(struct thermal_zone_device *tz, int mask, - struct thermal_cooling_device *cdev) -{ - int i; - - for (i = 0; i < tz->num_trips; i++) - if (mask & (1 << i)) - thermal_zone_unbind_cooling_device(tz, i, cdev); -} - /** * thermal_cooling_device_unregister - removes a thermal cooling device * @cdev: the thermal cooling device to remove. @@ -1157,8 +1101,6 @@ static void __unbind(struct thermal_zone_device *tz, int mask, */ void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev) { - int i; - const struct thermal_zone_params *tzp; struct thermal_zone_device *tz; if (!cdev) @@ -1175,21 +1117,8 @@ void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev) /* Unbind all thermal zones associated with 'this' cdev */ list_for_each_entry(tz, &thermal_tz_list, node) { - if (tz->ops->unbind) { + if (tz->ops->unbind) tz->ops->unbind(tz, cdev); - continue; - } - - if (!tz->tzp || !tz->tzp->tbp) - continue; - - tzp = tz->tzp; - for (i = 0; i < tzp->num_tbps; i++) { - if (tzp->tbp[i].cdev == cdev) { - __unbind(tz, tzp->tbp[i].trip_mask, cdev); - tzp->tbp[i].cdev = NULL; - } - } } mutex_unlock(&thermal_list_lock); @@ -1200,41 +1129,20 @@ EXPORT_SYMBOL_GPL(thermal_cooling_device_unregister); static void bind_tz(struct thermal_zone_device *tz) { - int i, ret; + int ret; struct thermal_cooling_device *pos = NULL; - const struct thermal_zone_params *tzp = tz->tzp; - if (!tzp && !tz->ops->bind) + if (!tz->ops->bind) return; mutex_lock(&thermal_list_lock); - /* If there is ops->bind, try to use ops->bind */ - if (tz->ops->bind) { - list_for_each_entry(pos, &thermal_cdev_list, node) { - ret = tz->ops->bind(tz, pos); - if (ret) - print_bind_err_msg(tz, pos, ret); - } - goto exit; - } - - if (!tzp || !tzp->tbp) - goto exit; - list_for_each_entry(pos, &thermal_cdev_list, node) { - for (i = 0; i < tzp->num_tbps; i++) { - if (tzp->tbp[i].cdev || !tzp->tbp[i].match) - continue; - if (tzp->tbp[i].match(tz, pos)) - continue; - tzp->tbp[i].cdev = pos; - __bind(tz, tzp->tbp[i].trip_mask, pos, - tzp->tbp[i].binding_limits, - tzp->tbp[i].weight); - } + ret = tz->ops->bind(tz, pos); + if (ret) + print_bind_err_msg(tz, pos, ret); } -exit: + mutex_unlock(&thermal_list_lock); } @@ -1491,15 +1399,13 @@ EXPORT_SYMBOL_GPL(thermal_zone_device_id); */ void thermal_zone_device_unregister(struct thermal_zone_device *tz) { - int i, tz_id; - const struct thermal_zone_params *tzp; + int tz_id; struct thermal_cooling_device *cdev; struct thermal_zone_device *pos = NULL; if (!tz) return; - tzp = tz->tzp; tz_id = tz->id; mutex_lock(&thermal_list_lock); @@ -1514,22 +1420,9 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) list_del(&tz->node); /* Unbind all cdevs associated with 'this' thermal zone */ - list_for_each_entry(cdev, &thermal_cdev_list, node) { - if (tz->ops->unbind) { + list_for_each_entry(cdev, &thermal_cdev_list, node) + if (tz->ops->unbind) tz->ops->unbind(tz, cdev); - continue; - } - - if (!tzp || !tzp->tbp) - break; - - for (i = 0; i < tzp->num_tbps; i++) { - if (tzp->tbp[i].cdev == cdev) { - __unbind(tz, tzp->tbp[i].trip_mask, cdev); - tzp->tbp[i].cdev = NULL; - } - } - } mutex_unlock(&thermal_list_lock); diff --git a/include/linux/thermal.h b/include/linux/thermal.h index fef625f799ae..ab7460bfdcf6 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -207,41 +207,6 @@ struct thermal_governor { struct list_head governor_list; }; -/* Structure that holds binding parameters for a zone */ -struct thermal_bind_params { - struct thermal_cooling_device *cdev; - - /* - * This is a measure of 'how effectively these devices can - * cool 'this' thermal zone. It shall be determined by - * platform characterization. This value is relative to the - * rest of the weights so a cooling device whose weight is - * double that of another cooling device is twice as - * effective. See Documentation/driver-api/thermal/sysfs-api.rst for more - * information. - */ - int weight; - - /* - * This is a bit mask that gives the binding relation between this - * thermal zone and cdev, for a particular trip point. - * See Documentation/driver-api/thermal/sysfs-api.rst for more information. - */ - int trip_mask; - - /* - * This is an array of cooling state limits. Must have exactly - * 2 * thermal_zone.number_of_trip_points. It is an array consisting - * of tuples <lower-state upper-state> of state limits. Each trip - * will be associated with one state limit tuple when binding. - * A NULL pointer means <THERMAL_NO_LIMITS THERMAL_NO_LIMITS> - * on all trips. - */ - unsigned long *binding_limits; - int (*match) (struct thermal_zone_device *tz, - struct thermal_cooling_device *cdev); -}; - /* Structure to define Thermal Zone parameters */ struct thermal_zone_params { char governor_name[THERMAL_NAME_LENGTH]; @@ -253,9 +218,6 @@ struct thermal_zone_params { */ bool no_hwmon; - int num_tbps; /* Number of tbp entries */ - struct thermal_bind_params *tbp; - /* * Sustainable power (heat) that this thermal zone can dissipate in * mW
Remove struct thermal_bind_params because no one is using it for thermal binding now. Signed-off-by: Zhang Rui <rui.zhang@intel.com> --- .../driver-api/thermal/sysfs-api.rst | 40 ------ drivers/thermal/thermal_core.c | 129 ++---------------- include/linux/thermal.h | 38 ------ 3 files changed, 11 insertions(+), 196 deletions(-)