diff mbox series

[RFC,01/20] ARM: dts: oxnas: remove obsolete device tree files

Message ID 20230331-topic-oxnas-upstream-remove-v1-1-5bd58fd1dd1f@linaro.org (mailing list archive)
State RFC, archived
Headers show
Series ARM: oxnas support removal | expand

Commit Message

Neil Armstrong March 31, 2023, 8:34 a.m. UTC 
Due to lack of maintainance and stall of development for a few years now,
and since no new features will ever be added upstream, remove support
for OX810 and OX820 devices.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 arch/arm/boot/dts/Makefile                         |   3 -
 arch/arm/boot/dts/ox810se-wd-mbwe.dts              | 115 -------
 arch/arm/boot/dts/ox810se.dtsi                     | 357 ---------------------
 .../dts/ox820-cloudengines-pogoplug-series-3.dts   |  93 ------
 arch/arm/boot/dts/ox820.dtsi                       | 299 -----------------
 5 files changed, 867 deletions(-)

Comments

Krzysztof Kozlowski April 2, 2023, 10:21 a.m. UTC | #1 
On 31/03/2023 10:34, Neil Armstrong wrote:
> Due to lack of maintainance and stall of development for a few years now,
> and since no new features will ever be added upstream, remove support
> for OX810 and OX820 devices.

Lack of development and new features are not really a reasons for
platform removal. Platform can stay in decent shape for many years,
without new features.

Lack of maintenance could be a reason, but first we usually make
platform orphaned to give community a chance. The best reason is lack of
users and any relevance, but your commit msg does not focus on that.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index efe4152e5846..ad83faecfdc6 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1033,9 +1033,6 @@  dtb-$(CONFIG_ARCH_PXA) += \
 	pxa300-raumfeld-speaker-m.dtb \
 	pxa300-raumfeld-speaker-one.dtb \
 	pxa300-raumfeld-speaker-s.dtb
-dtb-$(CONFIG_ARCH_OXNAS) += \
-	ox810se-wd-mbwe.dtb \
-	ox820-cloudengines-pogoplug-series-3.dtb
 dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-apq8016-sbc.dtb \
 	qcom-apq8026-asus-sparrow.dtb \
diff --git a/arch/arm/boot/dts/ox810se-wd-mbwe.dts b/arch/arm/boot/dts/ox810se-wd-mbwe.dts
deleted file mode 100644
index c59e06ff2423..000000000000
--- a/arch/arm/boot/dts/ox810se-wd-mbwe.dts
+++ /dev/null
@@ -1,115 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * wd-mbwe.dtsi - Device tree file for Western Digital My Book World Edition
- *
- * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
- */
-
-/dts-v1/;
-#include "ox810se.dtsi"
-
-/ {
-	model = "Western Digital My Book World Edition";
-
-	compatible = "wd,mbwe", "oxsemi,ox810se";
-
-	chosen {
-		bootargs = "console=ttyS1,115200n8 earlyprintk=serial";
-	};
-
-	memory {
-		/* 128Mbytes DDR */
-		reg = <0x48000000 0x8000000>;
-	};
-
-	aliases {
-		serial1 = &uart1;
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		power {
-			label = "power";
-			gpios = <&gpio0 0 1>;
-			linux,code = <0x198>;
-		};
-
-		recovery {
-			label = "recovery";
-			gpios = <&gpio0 4 1>;
-			linux,code = <0xab>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		a0 {
-			label = "activity0";
-			gpios = <&gpio0 25 0>;
-			default-state = "keep";
-		};
-
-		a1 {
-			label = "activity1";
-			gpios = <&gpio0 26 0>;
-			default-state = "keep";
-		};
-
-		a2 {
-			label = "activity2";
-			gpios = <&gpio0 5 0>;
-			default-state = "keep";
-		};
-
-		a3 {
-			label = "activity3";
-			gpios = <&gpio0 6 0>;
-			default-state = "keep";
-		};
-
-		a4 {
-			label = "activity4";
-			gpios = <&gpio0 7 0>;
-			default-state = "keep";
-		};
-
-		a5 {
-			label = "activity5";
-			gpios = <&gpio1 2 0>;
-			default-state = "keep";
-		};
-	};
-
-	i2c-gpio {
-		compatible = "i2c-gpio";
-		gpios = <&gpio0 3 0 /* sda */
-			 &gpio0 2 0 /* scl */
-			 >;
-		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rtc0: rtc@48 {
-			compatible = "st,m41t00";
-			reg = <0x68>;
-		};
-	};
-};
-
-&etha {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-};
diff --git a/arch/arm/boot/dts/ox810se.dtsi b/arch/arm/boot/dts/ox810se.dtsi
deleted file mode 100644
index 96c0745f7b70..000000000000
--- a/arch/arm/boot/dts/ox810se.dtsi
+++ /dev/null
@@ -1,357 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * ox810se.dtsi - Device tree file for Oxford Semiconductor OX810SE SoC
- *
- * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
- */
-
-#include <dt-bindings/clock/oxsemi,ox810se.h>
-#include <dt-bindings/reset/oxsemi,ox810se.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "oxsemi,ox810se";
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			device_type = "cpu";
-			compatible = "arm,arm926ej-s";
-			clocks = <&armclk>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		/* Max 256MB @ 0x48000000 */
-		reg = <0x48000000 0x10000000>;
-	};
-
-	clocks {
-		osc: oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-
-		gmacclk: gmacclk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <125000000>;
-		};
-
-		rpsclk: rpsclk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clock-div = <1>;
-			clock-mult = <1>;
-			clocks = <&osc>;
-		};
-
-		pll400: pll400 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <733333333>;
-		};
-
-		sysclk: sysclk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clock-div = <4>;
-			clock-mult = <1>;
-			clocks = <&pll400>;
-		};
-
-		armclk: armclk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-			clocks = <&pll400>;
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-		interrupt-parent = <&intc>;
-
-		etha: ethernet@40400000 {
-			compatible = "oxsemi,ox810se-dwmac", "snps,dwmac";
-			reg = <0x40400000 0x2000>;
-			interrupts = <8>;
-			interrupt-names = "macirq";
-			mac-address = [000000000000]; /* Filled in by U-Boot */
-			phy-mode = "rgmii";
-
-			clocks = <&stdclk 6>, <&gmacclk>;
-			clock-names = "gmac", "stmmaceth";
-			resets = <&reset 6>;
-
-			/* Regmap for sys registers */
-			oxsemi,sys-ctrl = <&sys>;
-
-			status = "disabled";
-		};
-
-		apb-bridge@44000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0 0x44000000 0x1000000>;
-
-			pinctrl: pinctrl {
-				compatible = "oxsemi,ox810se-pinctrl";
-
-				/* Regmap for sys registers */
-				oxsemi,sys-ctrl = <&sys>;
-
-				pinctrl_uart0: uart0 {
-					uart0a {
-						pins = "gpio31";
-						function = "fct3";
-					};
-					uart0b {
-						pins = "gpio32";
-						function = "fct3";
-					};
-				};
-
-				pinctrl_uart0_modem: uart0_modem {
-					uart0c {
-						pins = "gpio27";
-						function = "fct3";
-					};
-					uart0d {
-						pins = "gpio28";
-						function = "fct3";
-					};
-					uart0e {
-						pins = "gpio29";
-						function = "fct3";
-					};
-					uart0f {
-						pins = "gpio30";
-						function = "fct3";
-					};
-					uart0g {
-						pins = "gpio33";
-						function = "fct3";
-					};
-					uart0h {
-						pins = "gpio34";
-						function = "fct3";
-					};
-				};
-
-				pinctrl_uart1: uart1 {
-					uart1a {
-						pins = "gpio20";
-						function = "fct3";
-					};
-					uart1b {
-						pins = "gpio22";
-						function = "fct3";
-					};
-				};
-
-				pinctrl_uart1_modem: uart1_modem {
-					uart1c {
-						pins = "gpio8";
-						function = "fct3";
-					};
-					uart1d {
-						pins = "gpio9";
-						function = "fct3";
-					};
-					uart1e {
-						pins = "gpio23";
-						function = "fct3";
-					};
-					uart1f {
-						pins = "gpio24";
-						function = "fct3";
-					};
-					uart1g {
-						pins = "gpio25";
-						function = "fct3";
-					};
-					uart1h {
-						pins = "gpio26";
-						function = "fct3";
-					};
-				};
-
-				pinctrl_uart2: uart2 {
-					uart2a {
-						pins = "gpio6";
-						function = "fct3";
-					};
-					uart2b {
-						pins = "gpio7";
-						function = "fct3";
-					};
-				};
-
-				pinctrl_uart2_modem: uart2_modem {
-					uart2c {
-						pins = "gpio0";
-						function = "fct3";
-					};
-					uart2d {
-						pins = "gpio1";
-						function = "fct3";
-					};
-					uart2e {
-						pins = "gpio2";
-						function = "fct3";
-					};
-					uart2f {
-						pins = "gpio3";
-						function = "fct3";
-					};
-					uart2g {
-						pins = "gpio4";
-						function = "fct3";
-					};
-					uart2h {
-						pins = "gpio5";
-						function = "fct3";
-					};
-				};
-			};
-
-			gpio0: gpio@0 {
-				compatible = "oxsemi,ox810se-gpio";
-				reg = <0x000000 0x100000>;
-				interrupts = <21>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				ngpios = <32>;
-				oxsemi,gpio-bank = <0>;
-				gpio-ranges = <&pinctrl 0 0 32>;
-			};
-
-			gpio1: gpio@100000 {
-				compatible = "oxsemi,ox810se-gpio";
-				reg = <0x100000 0x100000>;
-				interrupts = <22>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				ngpios = <3>;
-				oxsemi,gpio-bank = <1>;
-				gpio-ranges = <&pinctrl 0 32 3>;
-			};
-
-			uart0: serial@200000 {
-			       compatible = "ns16550a";
-			       reg = <0x200000 0x100000>;
-			       clocks = <&sysclk>;
-			       interrupts = <23>;
-			       reg-shift = <0>;
-			       fifo-size = <16>;
-			       reg-io-width = <1>;
-			       current-speed = <115200>;
-			       no-loopback-test;
-			       status = "disabled";
-			       resets = <&reset RESET_UART1>;
-			};
-
-			uart1: serial@300000 {
-			       compatible = "ns16550a";
-			       reg = <0x300000 0x100000>;
-			       clocks = <&sysclk>;
-			       interrupts = <24>;
-			       reg-shift = <0>;
-			       fifo-size = <16>;
-			       reg-io-width = <1>;
-			       current-speed = <115200>;
-			       no-loopback-test;
-			       status = "disabled";
-			       resets = <&reset RESET_UART2>;
-			};
-
-			uart2: serial@900000 {
-			       compatible = "ns16550a";
-			       reg = <0x900000 0x100000>;
-			       clocks = <&sysclk>;
-			       interrupts = <29>;
-			       reg-shift = <0>;
-			       fifo-size = <16>;
-			       reg-io-width = <1>;
-			       current-speed = <115200>;
-			       no-loopback-test;
-			       status = "disabled";
-			       resets = <&reset RESET_UART3>;
-			};
-
-			uart3: serial@a00000 {
-			       compatible = "ns16550a";
-			       reg = <0xa00000 0x100000>;
-			       clocks = <&sysclk>;
-			       interrupts = <30>;
-			       reg-shift = <0>;
-			       fifo-size = <16>;
-			       reg-io-width = <1>;
-			       current-speed = <115200>;
-			       no-loopback-test;
-			       status = "disabled";
-			       resets = <&reset RESET_UART4>;
-			};
-		};
-
-		apb-bridge@45000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0 0x45000000 0x1000000>;
-
-			sys: sys-ctrl@0 {
-				compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd";
-				reg = <0x000000 0x100000>;
-
-				reset: reset-controller {
-					compatible = "oxsemi,ox810se-reset";
-					#reset-cells = <1>;
-				};
-
-				stdclk: stdclk {
-					compatible = "oxsemi,ox810se-stdclk";
-					#clock-cells = <1>;
-				};
-			};
-
-			rps@300000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "simple-bus";
-				ranges = <0 0x300000 0x100000>;
-
-				intc: interrupt-controller@0 {
-					compatible = "oxsemi,ox810se-rps-irq";
-					interrupt-controller;
-					reg = <0 0x200>;
-					#interrupt-cells = <1>;
-					valid-mask = <0xffffffff>;
-					clear-mask = <0xffffffff>;
-				};
-
-				timer0: timer@200 {
-					compatible = "oxsemi,ox810se-rps-timer";
-					reg = <0x200 0x40>;
-					clocks = <&rpsclk>;
-					interrupts = <4 5>;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts
deleted file mode 100644
index c3daceccde55..000000000000
--- a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts
+++ /dev/null
@@ -1,93 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * cloudengines-pogoplug-series-3.dtsi - Device tree file for Cloud Engines PogoPlug Series 3
- *
- * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
- */
-
-/dts-v1/;
-#include "ox820.dtsi"
-
-/ {
-	model = "Cloud Engines PogoPlug Series 3";
-
-	compatible = "cloudengines,pogoplugv3", "oxsemi,ox820";
-
-	chosen {
-		bootargs = "earlyprintk";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		/* 128Mbytes DDR */
-		reg = <0x60000000 0x8000000>;
-	};
-
-	aliases {
-		serial0 = &uart0;
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		blue {
-			label = "pogoplug:blue";
-			gpios = <&gpio0 2 0>;
-			default-state = "keep";
-		};
-
-		orange {
-			label = "pogoplug:orange";
-			gpios = <&gpio1 16 1>;
-			default-state = "keep";
-		};
-
-		green {
-			label = "pogoplug:green";
-			gpios = <&gpio1 17 1>;
-			default-state = "keep";
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart0>;
-};
-
-&nandc {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nand>;
-
-	nand@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		nand-ecc-mode = "soft";
-		nand-ecc-algo = "hamming";
-
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x00e00000>;
-			read-only;
-		};
-
-		partition@e00000 {
-			label = "ubi";
-			reg = <0x00e00000 0x07200000>;
-		};
-	};
-};
-
-&etha {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_etha_mdio>;
-};
diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi
deleted file mode 100644
index dde4364892bf..000000000000
--- a/arch/arm/boot/dts/ox820.dtsi
+++ /dev/null
@@ -1,299 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * ox820.dtsi - Device tree file for Oxford Semiconductor OX820 SoC
- *
- * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/oxsemi,ox820.h>
-#include <dt-bindings/reset/oxsemi,ox820.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "oxsemi,ox820";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "oxsemi,ox820-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,arm11mpcore";
-			clocks = <&armclk>;
-			reg = <0>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,arm11mpcore";
-			clocks = <&armclk>;
-			reg = <1>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		/* Max 512MB @ 0x60000000 */
-		reg = <0x60000000 0x20000000>;
-	};
-
-	clocks {
-		osc: oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-
-		gmacclk: gmacclk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <125000000>;
-		};
-
-		sysclk: sysclk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clock-div = <4>;
-			clock-mult = <1>;
-			clocks = <&osc>;
-		};
-
-		plla: plla {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <850000000>;
-		};
-
-		armclk: armclk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-			clocks = <&plla>;
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-		interrupt-parent = <&gic>;
-
-		nandc: nand-controller@41000000 {
-			compatible = "oxsemi,ox820-nand";
-			reg = <0x41000000 0x100000>;
-			clocks = <&stdclk CLK_820_NAND>;
-			resets = <&reset RESET_NAND>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		etha: ethernet@40400000 {
-			compatible = "oxsemi,ox820-dwmac", "snps,dwmac";
-			reg = <0x40400000 0x2000>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq", "eth_wake_irq";
-			mac-address = [000000000000]; /* Filled in by U-Boot */
-			phy-mode = "rgmii";
-
-			clocks = <&stdclk CLK_820_ETHA>, <&gmacclk>;
-			clock-names = "gmac", "stmmaceth";
-			resets = <&reset RESET_MAC>;
-
-			/* Regmap for sys registers */
-			oxsemi,sys-ctrl = <&sys>;
-
-			status = "disabled";
-		};
-
-		apb-bridge@44000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0 0x44000000 0x1000000>;
-
-			pinctrl: pinctrl {
-				compatible = "oxsemi,ox820-pinctrl";
-
-				/* Regmap for sys registers */
-				oxsemi,sys-ctrl = <&sys>;
-
-				pinctrl_uart0: uart0 {
-					uart0 {
-						pins = "gpio30", "gpio31";
-						function = "fct5";
-					};
-				};
-
-				pinctrl_uart0_modem: uart0_modem {
-					uart0_modem_a {
-						pins = "gpio24", "gpio24", "gpio26", "gpio27";
-						function = "fct4";
-					};
-					uart0_modem_b {
-						pins = "gpio28", "gpio29";
-						function = "fct5";
-					};
-				};
-
-				pinctrl_uart1: uart1 {
-					uart1 {
-						pins = "gpio7", "gpio8";
-						function = "fct4";
-					};
-				};
-
-				pinctrl_uart1_modem: uart1_modem {
-					uart1_modem {
-						pins = "gpio5", "gpio6", "gpio40", "gpio41", "gpio42", "gpio43";
-						function = "fct4";
-					};
-				};
-
-				pinctrl_etha_mdio: etha_mdio {
-					etha_mdio {
-						pins = "gpio3", "gpio4";
-						function = "fct1";
-					};
-				};
-
-				pinctrl_nand: nand {
-					nand {
-						pins = "gpio12", "gpio13", "gpio14", "gpio15",
-						     "gpio16", "gpio17", "gpio18", "gpio19",
-						     "gpio20", "gpio21", "gpio22", "gpio23",
-						     "gpio24";
-						function = "fct1";
-					};
-				};
-			};
-
-			gpio0: gpio@0 {
-				compatible = "oxsemi,ox820-gpio";
-				reg = <0x000000 0x100000>;
-				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				ngpios = <32>;
-				oxsemi,gpio-bank = <0>;
-				gpio-ranges = <&pinctrl 0 0 32>;
-			};
-
-			gpio1: gpio@100000 {
-				compatible = "oxsemi,ox820-gpio";
-				reg = <0x100000 0x100000>;
-				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				ngpios = <18>;
-				oxsemi,gpio-bank = <1>;
-				gpio-ranges = <&pinctrl 0 32 18>;
-			};
-
-			uart0: serial@200000 {
-			       compatible = "ns16550a";
-			       reg = <0x200000 0x100000>;
-			       interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			       reg-shift = <0>;
-			       fifo-size = <16>;
-			       reg-io-width = <1>;
-			       current-speed = <115200>;
-			       no-loopback-test;
-			       status = "disabled";
-			       clocks = <&sysclk>;
-			       resets = <&reset RESET_UART1>;
-			};
-
-			uart1: serial@300000 {
-			       compatible = "ns16550a";
-			       reg = <0x200000 0x100000>;
-			       interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-			       reg-shift = <0>;
-			       fifo-size = <16>;
-			       reg-io-width = <1>;
-			       current-speed = <115200>;
-			       no-loopback-test;
-			       status = "disabled";
-			       clocks = <&sysclk>;
-			       resets = <&reset RESET_UART2>;
-			};
-
-			rps@400000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "simple-bus";
-				ranges = <0 0x400000 0x100000>;
-
-				intc: interrupt-controller@0 {
-					compatible = "oxsemi,ox820-rps-irq", "oxsemi,ox810se-rps-irq";
-					interrupt-controller;
-					reg = <0 0x200>;
-					interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-					#interrupt-cells = <1>;
-					valid-mask = <0xffffffff>;
-					clear-mask = <0xffffffff>;
-				};
-
-				timer0: timer@200 {
-					compatible = "oxsemi,ox820-rps-timer";
-					reg = <0x200 0x40>;
-					clocks = <&sysclk>;
-					interrupt-parent = <&intc>;
-					interrupts = <4>;
-				};
-			};
-
-			sys: sys-ctrl@e00000 {
-				compatible = "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd";
-				reg = <0xe00000 0x200000>;
-
-				reset: reset-controller {
-					compatible = "oxsemi,ox820-reset", "oxsemi,ox810se-reset";
-					#reset-cells = <1>;
-				};
-
-				stdclk: stdclk {
-					compatible = "oxsemi,ox820-stdclk", "oxsemi,ox810se-stdclk";
-					#clock-cells = <1>;
-				};
-			};
-		};
-
-		apb-bridge@47000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0 0x47000000 0x1000000>;
-
-			scu: scu@0 {
-				compatible = "arm,arm11mp-scu";
-				reg = <0x0 0x100>;
-			};
-
-			local-timer@600 {
-				compatible = "arm,arm11mp-twd-timer";
-				reg = <0x600 0x20>;
-				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3)|IRQ_TYPE_LEVEL_HIGH)>;
-				clocks = <&armclk>;
-			};
-
-			gic: interrupt-controller@1000 {
-				compatible = "arm,arm11mp-gic";
-				interrupt-controller;
-				#interrupt-cells = <3>;
-				reg = <0x1000 0x1000>,
-				      <0x100 0x500>;
-			};
-		};
-	};
-};