diff mbox series

[v2,09/15] powercap/intel_rapl: Cleanup Power Limits support

Message ID 20230419024419.324436-10-rui.zhang@intel.com (mailing list archive)
State Mainlined, archived
Headers show
Series powercap/intel_rapl: Introduce RAPL TPMI support | expand

Commit Message

Zhang Rui April 19, 2023, 2:44 a.m. UTC 
The same set of operations are shared by different Powert Limits,
including Power Limit get/set, Power Limit enable/disable, clamping
enable/disable, time window get/set, and max power get/set, etc.

But the same operation for different Power Limit has different
primitives because they use different registers/register bits.

A lot of dirty/duplicate code was introduced to handle this difference.

Introduce a universal way to issue Power Limit operations.
Instead of using hardcoded primitive name directly, use Power Limit id
+ operation type, and hide all the Power Limit difference details in a
central place, get_pl_prim(). Two helpers, rapl_read_pl_data() and
rapl_write_pl_data(), are introduced at the same time to simplify the
code for issuing Power Limit operations.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
---
 drivers/powercap/intel_rapl_common.c | 343 ++++++++++++---------------
 include/linux/intel_rapl.h           |   1 -
 2 files changed, 146 insertions(+), 198 deletions(-)

Comments

Ville Syrjala Sept. 5, 2023, 6:21 a.m. UTC | #1 
On Wed, Apr 19, 2023 at 10:44:13AM +0800, Zhang Rui wrote:
> The same set of operations are shared by different Powert Limits,
> including Power Limit get/set, Power Limit enable/disable, clamping
> enable/disable, time window get/set, and max power get/set, etc.
> 
> But the same operation for different Power Limit has different
> primitives because they use different registers/register bits.
> 
> A lot of dirty/duplicate code was introduced to handle this difference.
> 
> Introduce a universal way to issue Power Limit operations.
> Instead of using hardcoded primitive name directly, use Power Limit id
> + operation type, and hide all the Power Limit difference details in a
> central place, get_pl_prim(). Two helpers, rapl_read_pl_data() and
> rapl_write_pl_data(), are introduced at the same time to simplify the
> code for issuing Power Limit operations.
> 
> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
> Tested-by: Wang Wendy <wendy.wang@intel.com>
> ---
>  drivers/powercap/intel_rapl_common.c | 343 ++++++++++++---------------
>  include/linux/intel_rapl.h           |   1 -
>  2 files changed, 146 insertions(+), 198 deletions(-)
> 
> diff --git a/drivers/powercap/intel_rapl_common.c b/drivers/powercap/intel_rapl_common.c
> index 8e77df42257a..7f80c35e5c86 100644
> --- a/drivers/powercap/intel_rapl_common.c
> +++ b/drivers/powercap/intel_rapl_common.c
<snip>
> @@ -818,6 +778,33 @@ static int rapl_write_data_raw(struct rapl_domain *rd,
>  	return ret;
>  }
>  
> +static int rapl_read_pl_data(struct rapl_domain *rd, int pl,
> +			      enum pl_prims pl_prim, bool xlate, u64 *data)
> +{
> +	enum rapl_primitives prim = get_pl_prim(pl, pl_prim);
> +
> +	if (!is_pl_valid(rd, pl))
> +		return -EINVAL;
> +
> +	return rapl_read_data_raw(rd, prim, xlate, data);
> +}
> +
> +static int rapl_write_pl_data(struct rapl_domain *rd, int pl,
> +			       enum pl_prims pl_prim,
> +			       unsigned long long value)
> +{
> +	enum rapl_primitives prim = get_pl_prim(pl, pl_prim);
> +
> +	if (!is_pl_valid(rd, pl))
> +		return -EINVAL;
> +
> +	if (rd->state & DOMAIN_STATE_BIOS_LOCKED) {
> +		pr_warn("%s:%s:%s locked by BIOS\n", rd->rp->name, rd->name, pl_names[pl]);
> +		return -EACCES;

This seems to be causing a lot of WARN level dmesg spam [1] during
suspend/resume on several machines. I suppose previously the
warning was only printed when trying to change the limits explicitly,
but now it gets printed in a lot more cases even if the user didn't
try to change anything.

[1] https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13594/fi-snb-2520m/igt@i915_suspend@basic-s2idle-without-i915.html
Zhang Rui Sept. 6, 2023, 3:14 a.m. UTC | #2 
Hi, Ville,

On Tue, 2023-09-05 at 09:21 +0300, Ville Syrjälä wrote:
> On Wed, Apr 19, 2023 at 10:44:13AM +0800, Zhang Rui wrote:
> > The same set of operations are shared by different Powert Limits,
> > including Power Limit get/set, Power Limit enable/disable, clamping
> > enable/disable, time window get/set, and max power get/set, etc.
> > 
> > But the same operation for different Power Limit has different
> > primitives because they use different registers/register bits.
> > 
> > A lot of dirty/duplicate code was introduced to handle this
> > difference.
> > 
> > Introduce a universal way to issue Power Limit operations.
> > Instead of using hardcoded primitive name directly, use Power Limit
> > id
> > + operation type, and hide all the Power Limit difference details
> > in a
> > central place, get_pl_prim(). Two helpers, rapl_read_pl_data() and
> > rapl_write_pl_data(), are introduced at the same time to simplify
> > the
> > code for issuing Power Limit operations.
> > 
> > Signed-off-by: Zhang Rui <rui.zhang@intel.com>
> > Tested-by: Wang Wendy <wendy.wang@intel.com>
> > ---
> >  drivers/powercap/intel_rapl_common.c | 343 ++++++++++++-----------
> > ----
> >  include/linux/intel_rapl.h           |   1 -
> >  2 files changed, 146 insertions(+), 198 deletions(-)
> > 
> > diff --git a/drivers/powercap/intel_rapl_common.c
> > b/drivers/powercap/intel_rapl_common.c
> > index 8e77df42257a..7f80c35e5c86 100644
> > --- a/drivers/powercap/intel_rapl_common.c
> > +++ b/drivers/powercap/intel_rapl_common.c
> <snip>
> > @@ -818,6 +778,33 @@ static int rapl_write_data_raw(struct
> > rapl_domain *rd,
> >         return ret;
> >  }
> >  
> > +static int rapl_read_pl_data(struct rapl_domain *rd, int pl,
> > +                             enum pl_prims pl_prim, bool xlate,
> > u64 *data)
> > +{
> > +       enum rapl_primitives prim = get_pl_prim(pl, pl_prim);
> > +
> > +       if (!is_pl_valid(rd, pl))
> > +               return -EINVAL;
> > +
> > +       return rapl_read_data_raw(rd, prim, xlate, data);
> > +}
> > +
> > +static int rapl_write_pl_data(struct rapl_domain *rd, int pl,
> > +                              enum pl_prims pl_prim,
> > +                              unsigned long long value)
> > +{
> > +       enum rapl_primitives prim = get_pl_prim(pl, pl_prim);
> > +
> > +       if (!is_pl_valid(rd, pl))
> > +               return -EINVAL;
> > +
> > +       if (rd->state & DOMAIN_STATE_BIOS_LOCKED) {
> > +               pr_warn("%s:%s:%s locked by BIOS\n", rd->rp->name,
> > rd->name, pl_names[pl]);
> > +               return -EACCES;
> 
> This seems to be causing a lot of WARN level dmesg spam [1] during
> suspend/resume on several machines. I suppose previously the
> warning was only printed when trying to change the limits explicitly,

Before this patch, when enabling a power limit, it doesn't give a
warning but returns -EACCES directly.

After this patch, it gives a warning when any change is made to a
locked power limit, and this includes enabling/setting the power limit,
changing the time window, etc.

So I think in your case, the RAPL Package domain is enabled upon resume
for some reason, maybe requested by thermald, and that's why we see
this new warning.

The below change keeps the previous logic, can you confirm this?

IMO, the new logic is right because making any change to a 
locked power limit is meaningless.

Srinivas,

Do we check if a domain/power_limit is locked before we enabling it in
thermald?

thanks,
rui

diff --git a/drivers/powercap/intel_rapl_common.c
b/drivers/powercap/intel_rapl_common.c
index 5c2e6d5eea2a..f6816a91d027 100644
--- a/drivers/powercap/intel_rapl_common.c
+++ b/drivers/powercap/intel_rapl_common.c
@@ -893,7 +893,7 @@ static int rapl_write_pl_data(struct rapl_domain
*rd, int pl,
 	if (!is_pl_valid(rd, pl))
 		return -EINVAL;
 
-	if (rd->rpl[pl].locked) {
+	if (rd->rpl[pl].locked && pl_prim == PL_LIMIT) {
 		pr_warn("%s:%s:%s locked by BIOS\n", rd->rp->name, rd-
>name, pl_names[pl]);
 		return -EACCES;
 	}
Pandruvada, Srinivas Sept. 6, 2023, 3:32 p.m. UTC | #3 
On Wed, 2023-09-06 at 03:14 +0000, Zhang, Rui wrote:
> Hi, Ville,
> 
> 
[...]

> The below change keeps the previous logic, can you confirm this?
> 
> IMO, the new logic is right because making any change to a 
> locked power limit is meaningless.
> 
> Srinivas,
> 
> Do we check if a domain/power_limit is locked before we enabling it
> in
> thermald?
There is no way to check locked bit from user space.

This was an issue several years back and thermald added logic to avoid
trying.
"
             if (ret == -ENODATA) {
                        thd_log_info("powercap RAPL is BIOS locked,
cannot update\n");
                        bios_locked = true;
}
"

But here it seems that issue with suspend/resume. thermald doesn't do
anything during suspend/resume.

Thanks,
Srinivas

> 
> thanks,
> rui
> 
> diff --git a/drivers/powercap/intel_rapl_common.c
> b/drivers/powercap/intel_rapl_common.c
> index 5c2e6d5eea2a..f6816a91d027 100644
> --- a/drivers/powercap/intel_rapl_common.c
> +++ b/drivers/powercap/intel_rapl_common.c
> @@ -893,7 +893,7 @@ static int rapl_write_pl_data(struct rapl_domain
> *rd, int pl,
>         if (!is_pl_valid(rd, pl))
>                 return -EINVAL;
>  
> -       if (rd->rpl[pl].locked) {
> +       if (rd->rpl[pl].locked && pl_prim == PL_LIMIT) {
>                 pr_warn("%s:%s:%s locked by BIOS\n", rd->rp->name,
> rd-
> > name, pl_names[pl]);
>                 return -EACCES;
>         }
> 
> 
> 
> 
>
diff mbox series

Patch

diff --git a/drivers/powercap/intel_rapl_common.c b/drivers/powercap/intel_rapl_common.c
index 8e77df42257a..7f80c35e5c86 100644
--- a/drivers/powercap/intel_rapl_common.c
+++ b/drivers/powercap/intel_rapl_common.c
@@ -96,9 +96,67 @@  enum unit_type {
 #define	DOMAIN_STATE_POWER_LIMIT_SET    BIT(1)
 #define DOMAIN_STATE_BIOS_LOCKED        BIT(2)
 
-static const char pl1_name[] = "long_term";
-static const char pl2_name[] = "short_term";
-static const char pl4_name[] = "peak_power";
+static const char *pl_names[NR_POWER_LIMITS] = {
+	[POWER_LIMIT1] = "long_term",
+	[POWER_LIMIT2] = "short_term",
+	[POWER_LIMIT4] = "peak_power",
+};
+
+enum pl_prims {
+	PL_ENABLE,
+	PL_CLAMP,
+	PL_LIMIT,
+	PL_TIME_WINDOW,
+	PL_MAX_POWER,
+};
+
+static bool is_pl_valid(struct rapl_domain *rd, int pl)
+{
+	if (pl < POWER_LIMIT1 || pl > POWER_LIMIT4)
+		return false;
+	return rd->rpl[pl].name ? true : false;
+}
+
+static int get_pl_prim(int pl, enum pl_prims prim)
+{
+	switch (pl) {
+	case POWER_LIMIT1:
+		if (prim == PL_ENABLE)
+			return PL1_ENABLE;
+		if (prim == PL_CLAMP)
+			return PL1_CLAMP;
+		if (prim == PL_LIMIT)
+			return POWER_LIMIT1;
+		if (prim == PL_TIME_WINDOW)
+			return TIME_WINDOW1;
+		if (prim == PL_MAX_POWER)
+			return THERMAL_SPEC_POWER;
+		return -EINVAL;
+	case POWER_LIMIT2:
+		if (prim == PL_ENABLE)
+			return PL2_ENABLE;
+		if (prim == PL_CLAMP)
+			return PL2_CLAMP;
+		if (prim == PL_LIMIT)
+			return POWER_LIMIT2;
+		if (prim == PL_TIME_WINDOW)
+			return TIME_WINDOW2;
+		if (prim == PL_MAX_POWER)
+			return MAX_POWER;
+		return -EINVAL;
+	case POWER_LIMIT4:
+		if (prim == PL_LIMIT)
+			return POWER_LIMIT4;
+		if (prim == PL_ENABLE)
+			return PL4_ENABLE;
+		/* PL4 would be around two times PL2, use same prim as PL2. */
+		if (prim == PL_MAX_POWER)
+			return MAX_POWER;
+		return -EINVAL;
+	default:
+		return -EINVAL;
+	}
+}
 
 #define power_zone_to_rapl_domain(_zone) \
 	container_of(_zone, struct rapl_domain, power_zone)
@@ -155,6 +213,12 @@  static int rapl_read_data_raw(struct rapl_domain *rd,
 static int rapl_write_data_raw(struct rapl_domain *rd,
 			       enum rapl_primitives prim,
 			       unsigned long long value);
+static int rapl_read_pl_data(struct rapl_domain *rd, int pl,
+			      enum pl_prims pl_prim,
+			      bool xlate, u64 *data);
+static int rapl_write_pl_data(struct rapl_domain *rd, int pl,
+			       enum pl_prims pl_prim,
+			       unsigned long long value);
 static u64 rapl_unit_xlate(struct rapl_domain *rd,
 			   enum unit_type type, u64 value, int to_raw);
 static void package_power_limit_irq_save(struct rapl_package *rp);
@@ -222,7 +286,7 @@  static int find_nr_power_limit(struct rapl_domain *rd)
 	int i, nr_pl = 0;
 
 	for (i = 0; i < NR_POWER_LIMITS; i++) {
-		if (rd->rpl[i].name)
+		if (is_pl_valid(rd, i))
 			nr_pl++;
 	}
 
@@ -233,37 +297,34 @@  static int set_domain_enable(struct powercap_zone *power_zone, bool mode)
 {
 	struct rapl_domain *rd = power_zone_to_rapl_domain(power_zone);
 	struct rapl_defaults *defaults = get_defaults(rd->rp);
-
-	if (rd->state & DOMAIN_STATE_BIOS_LOCKED)
-		return -EACCES;
+	int ret;
 
 	cpus_read_lock();
-	rapl_write_data_raw(rd, PL1_ENABLE, mode);
-	if (defaults->set_floor_freq)
+	ret = rapl_write_pl_data(rd, POWER_LIMIT1, PL_ENABLE, mode);
+	if (!ret && defaults->set_floor_freq)
 		defaults->set_floor_freq(rd, mode);
 	cpus_read_unlock();
 
-	return 0;
+	return ret;
 }
 
 static int get_domain_enable(struct powercap_zone *power_zone, bool *mode)
 {
 	struct rapl_domain *rd = power_zone_to_rapl_domain(power_zone);
 	u64 val;
+	int ret;
 
 	if (rd->state & DOMAIN_STATE_BIOS_LOCKED) {
 		*mode = false;
 		return 0;
 	}
 	cpus_read_lock();
-	if (rapl_read_data_raw(rd, PL1_ENABLE, true, &val)) {
-		cpus_read_unlock();
-		return -EIO;
-	}
-	*mode = val;
+	ret = rapl_read_pl_data(rd, POWER_LIMIT1, PL_ENABLE, true, &val);
+	if (!ret)
+		*mode = val;
 	cpus_read_unlock();
 
-	return 0;
+	return ret;
 }
 
 /* per RAPL domain ops, in the order of rapl_domain_type */
@@ -319,8 +380,8 @@  static int contraint_to_pl(struct rapl_domain *rd, int cid)
 {
 	int i, j;
 
-	for (i = 0, j = 0; i < NR_POWER_LIMITS; i++) {
-		if ((rd->rpl[i].name) && j++ == cid) {
+	for (i = POWER_LIMIT1, j = 0; i < NR_POWER_LIMITS; i++) {
+		if (is_pl_valid(rd, i) && j++ == cid) {
 			pr_debug("%s: index %d\n", __func__, i);
 			return i;
 		}
@@ -341,36 +402,11 @@  static int set_power_limit(struct powercap_zone *power_zone, int cid,
 	cpus_read_lock();
 	rd = power_zone_to_rapl_domain(power_zone);
 	id = contraint_to_pl(rd, cid);
-	if (id < 0) {
-		ret = id;
-		goto set_exit;
-	}
-
 	rp = rd->rp;
 
-	if (rd->state & DOMAIN_STATE_BIOS_LOCKED) {
-		dev_warn(&power_zone->dev,
-			 "%s locked by BIOS, monitoring only\n", rd->name);
-		ret = -EACCES;
-		goto set_exit;
-	}
-
-	switch (rd->rpl[id].prim_id) {
-	case PL1_ENABLE:
-		rapl_write_data_raw(rd, POWER_LIMIT1, power_limit);
-		break;
-	case PL2_ENABLE:
-		rapl_write_data_raw(rd, POWER_LIMIT2, power_limit);
-		break;
-	case PL4_ENABLE:
-		rapl_write_data_raw(rd, POWER_LIMIT4, power_limit);
-		break;
-	default:
-		ret = -EINVAL;
-	}
+	ret = rapl_write_pl_data(rd, id, PL_LIMIT, power_limit);
 	if (!ret)
 		package_power_limit_irq_save(rp);
-set_exit:
 	cpus_read_unlock();
 	return ret;
 }
@@ -380,38 +416,17 @@  static int get_current_power_limit(struct powercap_zone *power_zone, int cid,
 {
 	struct rapl_domain *rd;
 	u64 val;
-	int prim;
 	int ret = 0;
 	int id;
 
 	cpus_read_lock();
 	rd = power_zone_to_rapl_domain(power_zone);
 	id = contraint_to_pl(rd, cid);
-	if (id < 0) {
-		ret = id;
-		goto get_exit;
-	}
 
-	switch (rd->rpl[id].prim_id) {
-	case PL1_ENABLE:
-		prim = POWER_LIMIT1;
-		break;
-	case PL2_ENABLE:
-		prim = POWER_LIMIT2;
-		break;
-	case PL4_ENABLE:
-		prim = POWER_LIMIT4;
-		break;
-	default:
-		cpus_read_unlock();
-		return -EINVAL;
-	}
-	if (rapl_read_data_raw(rd, prim, true, &val))
-		ret = -EIO;
-	else
+	ret = rapl_read_pl_data(rd, id, PL_LIMIT, true, &val);
+	if (!ret)
 		*data = val;
 
-get_exit:
 	cpus_read_unlock();
 
 	return ret;
@@ -427,23 +442,9 @@  static int set_time_window(struct powercap_zone *power_zone, int cid,
 	cpus_read_lock();
 	rd = power_zone_to_rapl_domain(power_zone);
 	id = contraint_to_pl(rd, cid);
-	if (id < 0) {
-		ret = id;
-		goto set_time_exit;
-	}
 
-	switch (rd->rpl[id].prim_id) {
-	case PL1_ENABLE:
-		rapl_write_data_raw(rd, TIME_WINDOW1, window);
-		break;
-	case PL2_ENABLE:
-		rapl_write_data_raw(rd, TIME_WINDOW2, window);
-		break;
-	default:
-		ret = -EINVAL;
-	}
+	ret = rapl_write_pl_data(rd, id, PL_TIME_WINDOW, window);
 
-set_time_exit:
 	cpus_read_unlock();
 	return ret;
 }
@@ -459,33 +460,11 @@  static int get_time_window(struct powercap_zone *power_zone, int cid,
 	cpus_read_lock();
 	rd = power_zone_to_rapl_domain(power_zone);
 	id = contraint_to_pl(rd, cid);
-	if (id < 0) {
-		ret = id;
-		goto get_time_exit;
-	}
 
-	switch (rd->rpl[id].prim_id) {
-	case PL1_ENABLE:
-		ret = rapl_read_data_raw(rd, TIME_WINDOW1, true, &val);
-		break;
-	case PL2_ENABLE:
-		ret = rapl_read_data_raw(rd, TIME_WINDOW2, true, &val);
-		break;
-	case PL4_ENABLE:
-		/*
-		 * Time window parameter is not applicable for PL4 entry
-		 * so assigining '0' as default value.
-		 */
-		val = 0;
-		break;
-	default:
-		cpus_read_unlock();
-		return -EINVAL;
-	}
+	ret = rapl_read_pl_data(rd, id, PL_TIME_WINDOW, true, &val);
 	if (!ret)
 		*data = val;
 
-get_time_exit:
 	cpus_read_unlock();
 
 	return ret;
@@ -505,36 +484,23 @@  static const char *get_constraint_name(struct powercap_zone *power_zone,
 	return NULL;
 }
 
-static int get_max_power(struct powercap_zone *power_zone, int id, u64 *data)
+static int get_max_power(struct powercap_zone *power_zone, int cid, u64 *data)
 {
 	struct rapl_domain *rd;
 	u64 val;
-	int prim;
 	int ret = 0;
+	int id;
 
 	cpus_read_lock();
 	rd = power_zone_to_rapl_domain(power_zone);
-	switch (rd->rpl[id].prim_id) {
-	case PL1_ENABLE:
-		prim = THERMAL_SPEC_POWER;
-		break;
-	case PL2_ENABLE:
-		prim = MAX_POWER;
-		break;
-	case PL4_ENABLE:
-		prim = MAX_POWER;
-		break;
-	default:
-		cpus_read_unlock();
-		return -EINVAL;
-	}
-	if (rapl_read_data_raw(rd, prim, true, &val))
-		ret = -EIO;
-	else
+	id = contraint_to_pl(rd, cid);
+
+	ret = rapl_read_pl_data(rd, id, PL_MAX_POWER, true, &val);
+	if (!ret)
 		*data = val;
 
 	/* As a generalization rule, PL4 would be around two times PL2. */
-	if (rd->rpl[id].prim_id == PL4_ENABLE)
+	if (id == POWER_LIMIT4)
 		*data = *data * 2;
 
 	cpus_read_unlock();
@@ -560,6 +526,7 @@  static void rapl_init_domains(struct rapl_package *rp)
 
 	for (i = 0; i < RAPL_DOMAIN_MAX; i++) {
 		unsigned int mask = rp->domain_map & (1 << i);
+		int t;
 
 		if (!mask)
 			continue;
@@ -577,17 +544,10 @@  static void rapl_init_domains(struct rapl_package *rp)
 
 		/* PL1 is supported by default */
 		rp->priv->limits[i] |= BIT(POWER_LIMIT1);
-		rd->rpl[0].prim_id = PL1_ENABLE;
-		rd->rpl[0].name = pl1_name;
 
-		if (rp->priv->limits[i] & BIT(POWER_LIMIT2)) {
-			rd->rpl[1].prim_id = PL2_ENABLE;
-			rd->rpl[1].name = pl2_name;
-		}
-
-		if (rp->priv->limits[i] & BIT(POWER_LIMIT4)) {
-			rd->rpl[2].prim_id = PL4_ENABLE;
-			rd->rpl[2].name = pl4_name;
+		for (t = POWER_LIMIT1; t < NR_POWER_LIMITS; t++) {
+			if (rp->priv->limits[i] & BIT(t))
+				rd->rpl[t].name = pl_names[t];
 		}
 
 		for (j = 0; j < RAPL_DOMAIN_REG_MAX; j++)
@@ -818,6 +778,33 @@  static int rapl_write_data_raw(struct rapl_domain *rd,
 	return ret;
 }
 
+static int rapl_read_pl_data(struct rapl_domain *rd, int pl,
+			      enum pl_prims pl_prim, bool xlate, u64 *data)
+{
+	enum rapl_primitives prim = get_pl_prim(pl, pl_prim);
+
+	if (!is_pl_valid(rd, pl))
+		return -EINVAL;
+
+	return rapl_read_data_raw(rd, prim, xlate, data);
+}
+
+static int rapl_write_pl_data(struct rapl_domain *rd, int pl,
+			       enum pl_prims pl_prim,
+			       unsigned long long value)
+{
+	enum rapl_primitives prim = get_pl_prim(pl, pl_prim);
+
+	if (!is_pl_valid(rd, pl))
+		return -EINVAL;
+
+	if (rd->state & DOMAIN_STATE_BIOS_LOCKED) {
+		pr_warn("%s:%s:%s locked by BIOS\n", rd->rp->name, rd->name, pl_names[pl]);
+		return -EACCES;
+	}
+
+	return rapl_write_data_raw(rd, prim, value);
+}
 /*
  * Raw RAPL data stored in MSRs are in certain scales. We need to
  * convert them into standard units based on the units reported in
@@ -945,17 +932,16 @@  static void package_power_limit_irq_restore(struct rapl_package *rp)
 
 static void set_floor_freq_default(struct rapl_domain *rd, bool mode)
 {
-	int nr_powerlimit = find_nr_power_limit(rd);
+	int i;
 
 	/* always enable clamp such that p-state can go below OS requested
 	 * range. power capping priority over guranteed frequency.
 	 */
-	rapl_write_data_raw(rd, PL1_CLAMP, mode);
+	rapl_write_pl_data(rd, POWER_LIMIT1, PL_CLAMP, mode);
 
-	/* some domains have pl2 */
-	if (nr_powerlimit > 1) {
-		rapl_write_data_raw(rd, PL2_ENABLE, mode);
-		rapl_write_data_raw(rd, PL2_CLAMP, mode);
+	for (i = POWER_LIMIT2; i < NR_POWER_LIMITS; i++) {
+		rapl_write_pl_data(rd, i, PL_ENABLE, mode);
+		rapl_write_pl_data(rd, i, PL_CLAMP, mode);
 	}
 }
 
@@ -1327,11 +1313,10 @@  static void rapl_detect_powerlimit(struct rapl_domain *rd)
 			rd->state |= DOMAIN_STATE_BIOS_LOCKED;
 		}
 	}
-	/* check if power limit MSR exists, otherwise domain is monitoring only */
-	for (i = 0; i < NR_POWER_LIMITS; i++) {
-		int prim = rd->rpl[i].prim_id;
 
-		if (rapl_read_data_raw(rd, prim, false, &val64))
+	/* check if power limit exists, otherwise domain is monitoring only */
+	for (i = POWER_LIMIT1; i < NR_POWER_LIMITS; i++) {
+		if (rapl_read_pl_data(rd, i, PL_ENABLE, false, &val64))
 			rd->rpl[i].name = NULL;
 	}
 }
@@ -1381,13 +1366,13 @@  void rapl_remove_package(struct rapl_package *rp)
 	package_power_limit_irq_restore(rp);
 
 	for (rd = rp->domains; rd < rp->domains + rp->nr_domains; rd++) {
-		rapl_write_data_raw(rd, PL1_ENABLE, 0);
-		rapl_write_data_raw(rd, PL1_CLAMP, 0);
-		if (find_nr_power_limit(rd) > 1) {
-			rapl_write_data_raw(rd, PL2_ENABLE, 0);
-			rapl_write_data_raw(rd, PL2_CLAMP, 0);
-			rapl_write_data_raw(rd, PL4_ENABLE, 0);
+		int i;
+
+		for (i = POWER_LIMIT1; i < NR_POWER_LIMITS; i++) {
+			rapl_write_pl_data(rd, i, PL_ENABLE, 0);
+			rapl_write_pl_data(rd, i, PL_CLAMP, 0);
 		}
+
 		if (rd->id == RAPL_DOMAIN_PACKAGE) {
 			rd_package = rd;
 			continue;
@@ -1472,38 +1457,18 @@  static void power_limit_state_save(void)
 {
 	struct rapl_package *rp;
 	struct rapl_domain *rd;
-	int nr_pl, ret, i;
+	int ret, i;
 
 	cpus_read_lock();
 	list_for_each_entry(rp, &rapl_packages, plist) {
 		if (!rp->power_zone)
 			continue;
 		rd = power_zone_to_rapl_domain(rp->power_zone);
-		nr_pl = find_nr_power_limit(rd);
-		for (i = 0; i < nr_pl; i++) {
-			switch (rd->rpl[i].prim_id) {
-			case PL1_ENABLE:
-				ret = rapl_read_data_raw(rd,
-						 POWER_LIMIT1, true,
+		for (i = POWER_LIMIT1; i < NR_POWER_LIMITS; i++) {
+			ret = rapl_read_pl_data(rd, i, PL_LIMIT, true,
 						 &rd->rpl[i].last_power_limit);
-				if (ret)
-					rd->rpl[i].last_power_limit = 0;
-				break;
-			case PL2_ENABLE:
-				ret = rapl_read_data_raw(rd,
-						 POWER_LIMIT2, true,
-						 &rd->rpl[i].last_power_limit);
-				if (ret)
-					rd->rpl[i].last_power_limit = 0;
-				break;
-			case PL4_ENABLE:
-				ret = rapl_read_data_raw(rd,
-						 POWER_LIMIT4, true,
-						 &rd->rpl[i].last_power_limit);
-				if (ret)
-					rd->rpl[i].last_power_limit = 0;
-				break;
-			}
+			if (ret)
+				rd->rpl[i].last_power_limit = 0;
 		}
 	}
 	cpus_read_unlock();
@@ -1513,33 +1478,17 @@  static void power_limit_state_restore(void)
 {
 	struct rapl_package *rp;
 	struct rapl_domain *rd;
-	int nr_pl, i;
+	int i;
 
 	cpus_read_lock();
 	list_for_each_entry(rp, &rapl_packages, plist) {
 		if (!rp->power_zone)
 			continue;
 		rd = power_zone_to_rapl_domain(rp->power_zone);
-		nr_pl = find_nr_power_limit(rd);
-		for (i = 0; i < nr_pl; i++) {
-			switch (rd->rpl[i].prim_id) {
-			case PL1_ENABLE:
-				if (rd->rpl[i].last_power_limit)
-					rapl_write_data_raw(rd, POWER_LIMIT1,
-					    rd->rpl[i].last_power_limit);
-				break;
-			case PL2_ENABLE:
-				if (rd->rpl[i].last_power_limit)
-					rapl_write_data_raw(rd, POWER_LIMIT2,
-					    rd->rpl[i].last_power_limit);
-				break;
-			case PL4_ENABLE:
-				if (rd->rpl[i].last_power_limit)
-					rapl_write_data_raw(rd, POWER_LIMIT4,
-					    rd->rpl[i].last_power_limit);
-				break;
-			}
-		}
+		for (i = POWER_LIMIT1; i < NR_POWER_LIMITS; i++)
+			if (rd->rpl[i].last_power_limit)
+				rapl_write_pl_data(rd, i, PL_LIMIT,
+					       rd->rpl[i].last_power_limit);
 	}
 	cpus_read_unlock();
 }
diff --git a/include/linux/intel_rapl.h b/include/linux/intel_rapl.h
index bbd03b17dc8d..df17f4e51dbf 100644
--- a/include/linux/intel_rapl.h
+++ b/include/linux/intel_rapl.h
@@ -79,7 +79,6 @@  struct rapl_domain_data {
 
 struct rapl_power_limit {
 	struct powercap_zone_constraint *constraint;
-	int prim_id;		/* primitive ID used to enable */
 	struct rapl_domain *domain;
 	const char *name;
 	u64 last_power_limit;