| Message ID | 20230824094633.866043-1-djakov@kernel.org (mailing list archive) |
|---|---|
| State | Handled Elsewhere, archived |
| Headers | show |
| Series | [GIT,PULL] interconnect changes for 6.6 | expand |
On Thu, Aug 24, 2023 at 12:46:33PM +0300, Georgi Djakov wrote: > Hello Greg, > > This is the pull request with interconnect updates for the 6.6-rc1 merge > window. In contains a mix of core and driver changes as usual. This time > it might look a bit bigger as lines of code, but 97.5% of these are related > to expanding some macros in drivers and bring no functional change. There > are also a few patches that touch qcom clock drivers and these are in > immutable branch that is pulled also by the qcom tree. It contains also a > debugfs patch that you acked recently. The complete summary and details > are in the signed tag. > > All patches have been in linux-next during last few days. Please pull into > char-misc-next when possible. > > Thanks, > Georgi > > The following changes since commit 2ccdd1b13c591d306f0401d98dedc4bdcd02b421: > > Linux 6.5-rc6 (2023-08-13 11:29:55 -0700) > > are available in the Git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc.git tags/icc-6.6-rc1 Now pulled and pushed out, thanks. greg k-h
Hello Greg, This is the pull request with interconnect updates for the 6.6-rc1 merge window. In contains a mix of core and driver changes as usual. This time it might look a bit bigger as lines of code, but 97.5% of these are related to expanding some macros in drivers and bring no functional change. There are also a few patches that touch qcom clock drivers and these are in immutable branch that is pulled also by the qcom tree. It contains also a debugfs patch that you acked recently. The complete summary and details are in the signed tag. All patches have been in linux-next during last few days. Please pull into char-misc-next when possible. Thanks, Georgi The following changes since commit 2ccdd1b13c591d306f0401d98dedc4bdcd02b421: Linux 6.5-rc6 (2023-08-13 11:29:55 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc.git tags/icc-6.6-rc1 for you to fetch changes up to 6ac3f01201fa1c453fc8a8ce5a7208da9cca254d: Merge branch 'icc-debugfs' into icc-next (2023-08-22 21:05:09 +0300) ---------------------------------------------------------------- interconnect changes for 6.6 This pull request contains the interconnect changes for the 6.6-rc1 merge window which is a mix of core and driver changes with the following highlights: Core changes: - New generic test client driver that allows issuing bandwidth requests between endpoints via debugfs. - Annotate all structs with flexible array members with the __counted_by attribute. - Introduce new icc_bw_lock for cases where we need to serialize bandwidth aggregation and update to decouple that from paths that require memory allocation. Driver changes: - Move the Qualcomm SMD RPM bus-clocks from CCF to interconnect framework where they actually belong. This brings power management improvements and reduces the overhead and layering. These changes are in immutable branch that is being pulled also into the qcom tree. - Fixes for QUP nodes on SM8250. - Enable sync_state and keepalive for QCM2290. - Enable sync_state for SM8450. - Improve enable_mask-based BCMs handling and fix some bugs. - Add compatible string for the OSM-L3 on SDM670. - Add compatible strings for SC7180, SM8250 and SM6350 bandwidth monitors. - Expand and retire the DEFINE_QNODE and DEFINE_QBCM macros, which have become ugly beasts with many different arguments. Signed-off-by: Georgi Djakov <djakov@kernel.org> ---------------------------------------------------------------- Georgi Djakov (8): Merge branch 'qcom/20230526-topic-smd_icc-v7-0-09c78c175546@linaro.org' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git into icc-next interconnect: qcom: icc-rpm: Explicitly return 0 at the end of the function Merge branch 'icc-sm8250-qup' into icc-next Merge tag 'v6.5-rc6' into icc-next Merge branch 'icc-qcm2290' into icc-next Merge branch 'icc-enable-mask' into icc-next Merge branch 'icc-retire-macros' into icc-next Merge branch 'icc-debugfs' into icc-next Kees Cook (3): interconnect: icc-clk: Annotate struct icc_clk_provider with __counted_by interconnect: Annotate struct icc_path with __counted_by interconnect: qcom: Annotate struct icc_onecell_data with __counted_by Konrad Dybcio (52): dt-bindings: interconnect: qcom,bwmon: Document SC7180 BWMONs dt-bindings: interconnect: qcom,msm8998-bwmon: Add SM8250 bwmon instances dt-bindings: interconnect: qcom,msm8998-bwmon: Add SM6350 bwmon instances dt-bindings: interconnect: Add Qcom RPM ICC bindings soc: qcom: smd-rpm: Add QCOM_SMD_RPM_STATE_NUM soc: qcom: smd-rpm: Use tabs for defines clk: qcom: smd-rpm: Move some RPM resources to the common header interconnect: qcom: icc-rpm: Introduce keep_alive interconnect: qcom: Add missing headers in icc-rpm.h interconnect: qcom: Fold smd-rpm.h into icc-rpm.h interconnect: qcom: smd-rpm: Add rpmcc handling skeleton code interconnect: qcom: Define RPM bus clocks interconnect: qcom: sdm660: Hook up RPM bus clk definitions interconnect: qcom: msm8996: Hook up RPM bus clk definitions interconnect: qcom: qcs404: Hook up RPM bus clk definitions interconnect: qcom: msm8939: Hook up RPM bus clk definitions interconnect: qcom: msm8916: Hook up RPM bus clk definitions interconnect: qcom: qcm2290: Hook up RPM bus clk definitions interconnect: qcom: icc-rpm: Control bus rpmcc from icc clk: qcom: smd-rpm: Separate out interconnect bus clocks interconnect: qcom: icc-rpm: Fix bucket number interconnect: qcom: icc-rpm: Set bandwidth on both contexts interconnect: qcom: icc-rpm: Set correct bandwidth through RPM bw req interconnect: qcom: icc-rpm: Fix bandwidth calculations dt-bindings: interconnect: qcom,rpmh: Add SM8250 QUP virt dt-bindings: interconnect: qcom,sm8250: Add QUP virt interconnect: qcom: sm8250: Fix QUP0 nodes interconnect: qcom: qcm2290: Enable keep_alive on all buses interconnect: qcom: qcm2290: Enable sync state interconnect: qcom: sm8450: Enable sync_state interconnect: qcom: bcm-voter: Improve enable_mask handling interconnect: qcom: bcm-voter: Use enable_maks for keepalive voting interconnect: qcom: sc7180: Retire DEFINE_QNODE interconnect: qcom: sdm670: Retire DEFINE_QNODE interconnect: qcom: sdm845: Retire DEFINE_QNODE interconnect: qcom: sdx55: Retire DEFINE_QNODE interconnect: qcom: sdx65: Retire DEFINE_QNODE interconnect: qcom: sm6350: Retire DEFINE_QNODE interconnect: qcom: sm8150: Retire DEFINE_QNODE interconnect: qcom: sm8250: Retire DEFINE_QNODE interconnect: qcom: sm8350: Retire DEFINE_QNODE interconnect: qcom: icc-rpmh: Retire DEFINE_QNODE interconnect: qcom: sc7180: Retire DEFINE_QBCM interconnect: qcom: sdm670: Retire DEFINE_QBCM interconnect: qcom: sdm845: Retire DEFINE_QBCM interconnect: qcom: sdx55: Retire DEFINE_QBCM interconnect: qcom: sdx65: Retire DEFINE_QBCM interconnect: qcom: sm6350: Retire DEFINE_QBCM interconnect: qcom: sm8150: Retire DEFINE_QBCM interconnect: qcom: sm8250: Retire DEFINE_QBCM interconnect: qcom: sm8350: Retire DEFINE_QBCM interconnect: qcom: icc-rpmh: Retire DEFINE_QBCM Mike Tipton (3): debugfs: Add write support to debugfs_create_str() interconnect: Reintroduce icc_get() interconnect: Add debugfs test client Richard Acayan (1): dt-bindings: interconnect: OSM L3: add SDM670 compatible Rob Clark (2): interconnect: Fix locking for runpm vs reclaim interconnect: Teach lockdep about icc_bw_lock order Rob Herring (1): interconnect: Explicitly include correct DT includes Stephan Gerhold (1): soc: qcom: smd-rpm: Move icc_smd_rpm registration to clk-smd-rpm .../devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml | 6 + .../devicetree/bindings/interconnect/qcom,osm-l3.yaml | 1 + Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml | 18 +- Documentation/driver-api/interconnect.rst | 25 + drivers/clk/qcom/clk-smd-rpm.c | 314 +- drivers/interconnect/Makefile | 2 +- drivers/interconnect/core.c | 84 +- drivers/interconnect/debugfs-client.c | 168 + drivers/interconnect/icc-clk.c | 2 +- drivers/interconnect/imx/imx8mp.c | 1 - drivers/interconnect/internal.h | 5 +- drivers/interconnect/qcom/Makefile | 2 +- drivers/interconnect/qcom/bcm-voter.c | 43 +- drivers/interconnect/qcom/bcm-voter.h | 8 - drivers/interconnect/qcom/icc-rpm-clocks.c | 77 + drivers/interconnect/qcom/icc-rpm.c | 224 +- drivers/interconnect/qcom/icc-rpm.h | 56 +- drivers/interconnect/qcom/icc-rpmh.c | 5 +- drivers/interconnect/qcom/icc-rpmh.h | 10 - drivers/interconnect/qcom/msm8916.c | 7 +- drivers/interconnect/qcom/msm8939.c | 8 +- drivers/interconnect/qcom/msm8974.c | 7 +- drivers/interconnect/qcom/msm8996.c | 13 +- drivers/interconnect/qcom/osm-l3.c | 4 +- drivers/interconnect/qcom/qcm2290.c | 18 +- drivers/interconnect/qcom/qcs404.c | 7 +- drivers/interconnect/qcom/qdu1000.c | 3 +- drivers/interconnect/qcom/sa8775p.c | 3 +- drivers/interconnect/qcom/sc7180.c | 1616 ++++++- drivers/interconnect/qcom/sc7280.c | 3 +- drivers/interconnect/qcom/sc8180x.c | 3 +- drivers/interconnect/qcom/sc8280xp.c | 3 +- drivers/interconnect/qcom/sdm660.c | 11 +- drivers/interconnect/qcom/sdm670.c | 1389 +++++- drivers/interconnect/qcom/sdm845.c | 1658 ++++++- drivers/interconnect/qcom/sdx55.c | 846 +++- drivers/interconnect/qcom/sdx65.c | 833 +++- drivers/interconnect/qcom/sm6350.c | 1529 +++++- drivers/interconnect/qcom/sm8150.c | 1689 ++++++- drivers/interconnect/qcom/sm8250.c | 1822 +++++++- drivers/interconnect/qcom/sm8250.h | 6 + drivers/interconnect/qcom/sm8350.c | 1801 ++++++- drivers/interconnect/qcom/sm8450.c | 5 +- drivers/interconnect/qcom/sm8550.c | 4 +- drivers/interconnect/qcom/smd-rpm.c | 25 +- drivers/interconnect/qcom/smd-rpm.h | 15 - drivers/soc/qcom/smd-rpm.c | 17 +- fs/debugfs/file.c | 48 +- include/dt-bindings/interconnect/qcom,rpm-icc.h | 13 + include/dt-bindings/interconnect/qcom,sm8250.h | 7 + include/linux/interconnect-provider.h | 2 +- include/linux/soc/qcom/smd-rpm.h | 20 +- 52 files changed, 12766 insertions(+), 1720 deletions(-) create mode 100644 drivers/interconnect/debugfs-client.c create mode 100644 drivers/interconnect/qcom/icc-rpm-clocks.c delete mode 100644 drivers/interconnect/qcom/smd-rpm.h create mode 100644 include/dt-bindings/interconnect/qcom,rpm-icc.h