Message ID | 20231018061714.3553817-12-s.hauer@pengutronix.de (mailing list archive) |
---|---|
State | Accepted |
Delegated to: | Chanwoo Choi |
Headers | show |
Series | Add perf support to the rockchip-dfi driver | expand |
On 23. 10. 18. 15:16, Sascha Hauer wrote: > According to the downstream driver the DDRMON_CTRL_LPDDR23 bit must be > set for both LPDDR2 and LPDDR3. Add the missing LPDDR2 case and while > at it turn the if/else if/else into switch/case which makes it easier > to read. > > Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> > Acked-by: Chanwoo Choi <cw00.choi@samsung.com> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> > --- > drivers/devfreq/event/rockchip-dfi.c | 11 +++++++++-- > 1 file changed, 9 insertions(+), 2 deletions(-) > > diff --git a/drivers/devfreq/event/rockchip-dfi.c b/drivers/devfreq/event/rockchip-dfi.c > index 571d72d1abd1c..8ce0191552ef1 100644 > --- a/drivers/devfreq/event/rockchip-dfi.c > +++ b/drivers/devfreq/event/rockchip-dfi.c > @@ -83,12 +83,19 @@ static void rockchip_dfi_start_hardware_counter(struct devfreq_event_dev *edev) > DDRMON_CTRL_HARDWARE_EN), dfi_regs + DDRMON_CTRL); > > /* set ddr type to dfi */ > - if (dfi->ddr_type == ROCKCHIP_DDRTYPE_LPDDR3) > + switch (dfi->ddr_type) { > + case ROCKCHIP_DDRTYPE_LPDDR2: > + case ROCKCHIP_DDRTYPE_LPDDR3: > writel_relaxed(HIWORD_UPDATE(DDRMON_CTRL_LPDDR23, DDRMON_CTRL_DDR_TYPE_MASK), > dfi_regs + DDRMON_CTRL); > - else if (dfi->ddr_type == ROCKCHIP_DDRTYPE_LPDDR4) > + break; > + case ROCKCHIP_DDRTYPE_LPDDR4: > writel_relaxed(HIWORD_UPDATE(DDRMON_CTRL_LPDDR4, DDRMON_CTRL_DDR_TYPE_MASK), > dfi_regs + DDRMON_CTRL); > + break; > + default: > + break; > + } > > /* enable count, use software mode */ > writel_relaxed(HIWORD_UPDATE(DDRMON_CTRL_SOFTWARE_EN, DDRMON_CTRL_SOFTWARE_EN), Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
> -----Original Message----- > From: Sascha Hauer <s.hauer@pengutronix.de> > Sent: Wednesday, October 18, 2023 3:17 PM > To: linux-rockchip@lists.infradead.org > Cc: linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org; > linux-pm@vger.kernel.org; Heiko Stuebner <heiko@sntech.de>; Chanwoo Choi > <chanwoo@kernel.org>; Kyungmin Park <kyungmin.park@samsung.com>; MyungJoo > Ham <myungjoo.ham@samsung.com>; Will Deacon <will@kernel.org>; Mark > Rutland <mark.rutland@arm.com>; kernel@pengutronix.de; Michael Riesch > <michael.riesch@wolfvision.net>; Robin Murphy <robin.murphy@arm.com>; > Vincent Legoll <vincent.legoll@gmail.com>; Rob Herring > <robh+dt@kernel.org>; Krzysztof Kozlowski > <krzysztof.kozlowski+dt@linaro.org>; Conor Dooley <conor+dt@kernel.org>; > devicetree@vger.kernel.org; Sebastian Reichel > <sebastian.reichel@collabora.com>; Sascha Hauer <s.hauer@pengutronix.de>; > Jonathan Cameron <Jonathan.Cameron@huawei.com>; Chanwoo Choi > <cw00.choi@samsung.com> > Subject: [PATCH v8 11/26] PM / devfreq: rockchip-dfi: Handle LPDDR2 > correctly > > According to the downstream driver the DDRMON_CTRL_LPDDR23 bit must be set > for both LPDDR2 and LPDDR3. Add the missing LPDDR2 case and while at it > turn the if/else if/else into switch/case which makes it easier to read. > > Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> > Acked-by: Chanwoo Choi <cw00.choi@samsung.com> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> > --- > drivers/devfreq/event/rockchip-dfi.c | 11 +++++++++-- > 1 file changed, 9 insertions(+), 2 deletions(-) > > diff --git a/drivers/devfreq/event/rockchip-dfi.c > b/drivers/devfreq/event/rockchip-dfi.c > index 571d72d1abd1c..8ce0191552ef1 100644 > --- a/drivers/devfreq/event/rockchip-dfi.c > +++ b/drivers/devfreq/event/rockchip-dfi.c > @@ -83,12 +83,19 @@ static void rockchip_dfi_start_hardware_counter(struct > devfreq_event_dev *edev) > DDRMON_CTRL_HARDWARE_EN), dfi_regs + DDRMON_CTRL); > > /* set ddr type to dfi */ > - if (dfi->ddr_type == ROCKCHIP_DDRTYPE_LPDDR3) > + switch (dfi->ddr_type) { > + case ROCKCHIP_DDRTYPE_LPDDR2: > + case ROCKCHIP_DDRTYPE_LPDDR3: > writel_relaxed(HIWORD_UPDATE(DDRMON_CTRL_LPDDR23, > DDRMON_CTRL_DDR_TYPE_MASK), > dfi_regs + DDRMON_CTRL); > - else if (dfi->ddr_type == ROCKCHIP_DDRTYPE_LPDDR4) > + break; > + case ROCKCHIP_DDRTYPE_LPDDR4: > writel_relaxed(HIWORD_UPDATE(DDRMON_CTRL_LPDDR4, > DDRMON_CTRL_DDR_TYPE_MASK), > dfi_regs + DDRMON_CTRL); > + break; > + default: > + break; > + } > > /* enable count, use software mode */ > writel_relaxed(HIWORD_UPDATE(DDRMON_CTRL_SOFTWARE_EN, > DDRMON_CTRL_SOFTWARE_EN), > -- > 2.39.2 Applied it. Thanks Best Regards, Chanwoo Choi
diff --git a/drivers/devfreq/event/rockchip-dfi.c b/drivers/devfreq/event/rockchip-dfi.c index 571d72d1abd1c..8ce0191552ef1 100644 --- a/drivers/devfreq/event/rockchip-dfi.c +++ b/drivers/devfreq/event/rockchip-dfi.c @@ -83,12 +83,19 @@ static void rockchip_dfi_start_hardware_counter(struct devfreq_event_dev *edev) DDRMON_CTRL_HARDWARE_EN), dfi_regs + DDRMON_CTRL); /* set ddr type to dfi */ - if (dfi->ddr_type == ROCKCHIP_DDRTYPE_LPDDR3) + switch (dfi->ddr_type) { + case ROCKCHIP_DDRTYPE_LPDDR2: + case ROCKCHIP_DDRTYPE_LPDDR3: writel_relaxed(HIWORD_UPDATE(DDRMON_CTRL_LPDDR23, DDRMON_CTRL_DDR_TYPE_MASK), dfi_regs + DDRMON_CTRL); - else if (dfi->ddr_type == ROCKCHIP_DDRTYPE_LPDDR4) + break; + case ROCKCHIP_DDRTYPE_LPDDR4: writel_relaxed(HIWORD_UPDATE(DDRMON_CTRL_LPDDR4, DDRMON_CTRL_DDR_TYPE_MASK), dfi_regs + DDRMON_CTRL); + break; + default: + break; + } /* enable count, use software mode */ writel_relaxed(HIWORD_UPDATE(DDRMON_CTRL_SOFTWARE_EN, DDRMON_CTRL_SOFTWARE_EN),