[09/12] arm64: dts: qcom: qcm2290: Hook up interconnects

Message ID	20231125-topic-rb1_feat-v1-9-11d71b12b058@linaro.org (mailing list archive)
State	Handled Elsewhere, archived
Headers	show Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="RJp8o3LB" From: Konrad Dybcio <konrad.dybcio@linaro.org> Date: Sat, 25 Nov 2023 15:17:37 +0100 Subject: [PATCH 09/12] arm64: dts: qcom: qcm2290: Hook up interconnects Precedence: bulk MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Message-Id: <20231125-topic-rb1_feat-v1-9-11d71b12b058@linaro.org> References: <20231125-topic-rb1_feat-v1-0-11d71b12b058@linaro.org> In-Reply-To: <20231125-topic-rb1_feat-v1-0-11d71b12b058@linaro.org> To: Rob Clark <robdclark@gmail.com>, Abhinav Kumar <quic_abhinavk@quicinc.com>, Dmitry Baryshkov <dmitry.baryshkov@linaro.org>, Sean Paul <sean@poorly.run>, David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>, Maarten Lankhorst <maarten.lankhorst@linux.intel.com>, Maxime Ripard <mripard@kernel.org>, Thomas Zimmermann <tzimmermann@suse.de>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Loic Poulain <loic.poulain@linaro.org>, Bryan O'Donoghue <bryan.odonoghue@linaro.org>, Andy Gross <agross@kernel.org>, Bjorn Andersson <andersson@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>, Georgi Djakov <djakov@kernel.org>, Will Deacon <will@kernel.org>, Robin Murphy <robin.murphy@arm.com>, Joerg Roedel <joro@8bytes.org>, Krishna Manikandan <quic_mkrishn@quicinc.com>, Robert Marko <robimarko@gmail.com>, Das Srinagesh <quic_gurus@quicinc.com> Cc: Marijn Suijten <marijn.suijten@somainline.org>, Rob Herring <robh@kernel.org>, linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org, freedreno@lists.freedesktop.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, iommu@lists.linux.dev, Konrad Dybcio <konrad.dybcio@linaro.org>
Series	RB1/QCM2290 features \| expand [00/12] RB1/QCM2290 features [01/12] dt-bindings: display: msm: qcm2290-mdss: Use the non-deprecated DSI compat [02/12] dt-bindings: display: msm: Add reg bus and rotator interconnects [03/12] dt-bindings: display: msm: qcm2290-mdss: Allow 2 interconnects [04/12] dt-bindings: display: msm: sm8450-mdss: Allow 3 interconnects [05/12] dt-bindings: interconnect: qcom,msm8998-bwmon: Add QCM2290 bwmon instance [06/12] dt-bindings: firmware: qcom,scm: Allow interconnect for everyone [07/12] iommu/arm-smmu-qcom: Add QCM2290 DPU compatible [08/12] arm64: dts: qcom: qcm2290: Add display nodes [09/12] arm64: dts: qcom: qcm2290: Hook up interconnects [10/12] arm64: dts: qcom: qrb2210-rb1: Set up HDMI [11/12] arm64: dts: qcom: qrb2210-rb1: Enable CAN bus controller [12/12] arm64: dts: qcom: qrb2210-rb1: add wifi variant property

diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi index a3edc4667cc5..ce04d0acdede 100644 --- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi +++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi @@ -12,6 +12,8 @@ #include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interconnect/qcom,qcm2290.h> +#include <dt-bindings/interconnect/qcom,rpm-icc.h> #include <dt-bindings/power/qcom-rpmpd.h> / { @@ -151,6 +153,8 @@ scm: scm { clocks = <&rpmcc RPM_SMD_CE1_CLK>; clock-names = "core"; #reset-cells = <1>; + interconnects = <&system_noc MASTER_CRYPTO_CORE0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; }; }; @@ -669,6 +673,33 @@ usb_qmpphy: phy@1615000 { status = "disabled"; }; + system_noc: interconnect@1880000 { + compatible = "qcom,qcm2290-snoc"; + reg = <0x0 0x01880000 0x0 0x60200>; + #interconnect-cells = <2>; + + qup_virt: interconnect-qup { + compatible = "qcom,qcm2290-qup-virt"; + #interconnect-cells = <2>; + }; + + mmnrt_virt: interconnect-mmnrt { + compatible = "qcom,qcm2290-mmnrt-virt"; + #interconnect-cells = <2>; + }; + + mmrt_virt: interconnect-mmrt { + compatible = "qcom,qcm2290-mmrt-virt"; + #interconnect-cells = <2>; + }; + }; + + config_noc: interconnect@1900000 { + compatible = "qcom,qcm2290-cnoc"; + reg = <0x0 0x01900000 0x0 0x8200>; + #interconnect-cells = <2>; + }; + qfprom@1b44000 { compatible = "qcom,qcm2290-qfprom", "qcom,qfprom"; reg = <0x0 0x01b44000 0x0 0x3000>; @@ -681,6 +712,60 @@ qusb2_hstx_trim: hstx-trim@25b { }; }; + pmu@1b8e300 { + compatible = "qcom,qcm2290-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0x0 0x01b8e300 0x0 0x600>; + interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + interconnects = <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG + &bimc SLAVE_EBI1 RPM_ACTIVE_TAG>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <(200 * 4 * 1000)>; + }; + + opp-1 { + opp-peak-kBps = <(300 * 4 * 1000)>; + }; + + opp-2 { + opp-peak-kBps = <(451 * 4 * 1000)>; + }; + + opp-3 { + opp-peak-kBps = <(547 * 4 * 1000)>; + }; + + opp-4 { + opp-peak-kBps = <(681 * 4 * 1000)>; + }; + + opp-5 { + opp-peak-kBps = <(768 * 4 * 1000)>; + }; + + opp-6 { + opp-peak-kBps = <(1017 * 4 * 1000)>; + }; + + opp-7 { + opp-peak-kBps = <(1353 * 4 * 1000)>; + }; + + opp-8 { + opp-peak-kBps = <(1555 * 4 * 1000)>; + }; + + opp-9 { + opp-peak-kBps = <(1804 * 4 * 1000)>; + }; + }; + }; + spmi_bus: spmi@1c40000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0 0x01c40000 0x0 0x1100>, @@ -721,6 +806,12 @@ rng: rng@4453000 { clock-names = "core"; }; + bimc: interconnect@4480000 { + compatible = "qcom,qcm2290-bimc"; + reg = <0x0 0x04480000 0x0 0x80000>; + #interconnect-cells = <2>; + }; + rpm_msg_ram: sram@45f0000 { compatible = "qcom,rpm-msg-ram"; reg = <0x0 0x045f0000 0x0 0x7000>; @@ -756,13 +847,45 @@ sdhc_1: mmc@4744000 { resets = <&gcc GCC_SDCC1_BCR>; power-domains = <&rpmpd QCM2290_VDDCX>; + operating-points-v2 = <&sdhc1_opp_table>; iommus = <&apps_smmu 0xc0 0x0>; + interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_SDCC_1 RPM_ALWAYS_TAG>; + interconnect-names = "sdhc-ddr", + "cpu-sdhc"; qcom,dll-config = <0x000f642c>; qcom,ddr-config = <0x80040868>; bus-width = <8>; status = "disabled"; + + sdhc1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_low_svs>; + opp-peak-kBps = <250000 133320>; + opp-avg-kBps = <102400 65000>; + }; + + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + required-opps = <&rpmpd_opp_low_svs>; + opp-peak-kBps = <800000 300000>; + opp-avg-kBps = <204800 200000>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmpd_opp_svs_plus>; + opp-peak-kBps = <800000 300000>; + opp-avg-kBps = <204800 200000>; + }; + }; }; sdhc_2: mmc@4784000 { @@ -786,6 +909,12 @@ sdhc_2: mmc@4784000 { power-domains = <&rpmpd QCM2290_VDDCX>; operating-points-v2 = <&sdhc2_opp_table>; iommus = <&apps_smmu 0xa0 0x0>; + interconnects = <&system_noc MASTER_SDCC_2 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_SDCC_2 RPM_ALWAYS_TAG>; + interconnect-names = "sdhc-ddr", + "cpu-sdhc"; qcom,dll-config = <0x0007642c>; qcom,ddr-config = <0x80040868>; @@ -799,11 +928,15 @@ sdhc2_opp_table: opp-table { opp-100000000 { opp-hz = /bits/ 64 <100000000>; required-opps = <&rpmpd_opp_low_svs>; + opp-peak-kBps = <250000 133320>; + opp-avg-kBps = <261438 150000>; }; opp-202000000 { opp-hz = /bits/ 64 <202000000>; required-opps = <&rpmpd_opp_svs_plus>; + opp-peak-kBps = <800000 300000>; + opp-avg-kBps = <261438 300000>; }; }; }; @@ -851,6 +984,15 @@ i2c0: i2c@4a80000 { dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, <&gpi_dma0 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -867,6 +1009,12 @@ spi0: spi@4a80000 { dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, <&gpi_dma0 1 0 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -880,6 +1028,12 @@ uart0: serial@4a80000 { clock-names = "se"; pinctrl-0 = <&qup_uart0_default>; pinctrl-names = "default"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; @@ -894,6 +1048,15 @@ i2c1: i2c@4a84000 { dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, <&gpi_dma0 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -910,6 +1073,12 @@ spi1: spi@4a84000 { dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, <&gpi_dma0 1 1 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -926,6 +1095,15 @@ i2c2: i2c@4a88000 { dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, <&gpi_dma0 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -942,6 +1120,12 @@ spi2: spi@4a88000 { dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, <&gpi_dma0 1 2 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -958,6 +1142,15 @@ i2c3: i2c@4a8c000 { dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, <&gpi_dma0 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -974,6 +1167,12 @@ spi3: spi@4a8c000 { dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, <&gpi_dma0 1 3 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -990,6 +1189,15 @@ i2c4: i2c@4a90000 { dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, <&gpi_dma0 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1006,6 +1214,12 @@ spi4: spi@4a90000 { dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, <&gpi_dma0 1 4 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1019,6 +1233,12 @@ uart4: serial@4a90000 { clock-names = "se"; pinctrl-0 = <&qup_uart4_default>; pinctrl-names = "default"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; @@ -1033,6 +1253,15 @@ i2c5: i2c@4a94000 { dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, <&gpi_dma0 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1049,6 +1278,12 @@ spi5: spi@4a94000 { dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, <&gpi_dma0 1 5 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1081,6 +1316,13 @@ usb: usb@4ef8800 { resets = <&gcc GCC_USB30_PRIM_BCR>; power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + /* TODO: USB<->IPA path */ + interconnects = <&system_noc MASTER_USB3_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_USB3 RPM_ALWAYS_TAG>; + interconnect-names = "usb-ddr", + "apps-usb"; wakeup-source; #address-cells = <2>; @@ -1127,6 +1369,12 @@ mdss: display-subsystem@5e00000 { iommus = <&apps_smmu 0x420 0x2>, <&apps_smmu 0x421 0x0>; + interconnects = <&mmrt_virt MASTER_MDP0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_DISPLAY_CFG RPM_ALWAYS_TAG>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; #address-cells = <2>; #size-cells = <2>;

[09/12] arm64: dts: qcom: qcm2290: Hook up interconnects

Commit Message

Patch