| Message ID | 20240219153639.179814-8-andre.przywara@arm.com (mailing list archive) |
|---|---|
| State | New |
| Delegated to: | Daniel Lezcano |
| Headers | show |
| Series | add support for H616 thermal system | expand |
Dne ponedeljek, 19. februar 2024 ob 16:36:39 CET je Andre Przywara napisal(a): > From: Martin Botka <martin.botka@somainline.org> > > There are four thermal sensors: > - CPU > - GPU > - VE > - DRAM > > Add the thermal sensor configuration and the thermal zones. > > Signed-off-by: Martin Botka <martin.botka@somainline.org> > Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Best regards, Jernej > --- > .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 88 +++++++++++++++++++ > 1 file changed, 88 insertions(+) > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi > index 12ffabc79bcde..7c7d7c285505c 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi > @@ -9,6 +9,7 @@ > #include <dt-bindings/clock/sun6i-rtc.h> > #include <dt-bindings/reset/sun50i-h616-ccu.h> > #include <dt-bindings/reset/sun50i-h6-r-ccu.h> > +#include <dt-bindings/thermal/thermal.h> > > / { > interrupt-parent = <&gic>; > @@ -138,6 +139,10 @@ sid: efuse@3006000 { > reg = <0x03006000 0x1000>; > #address-cells = <1>; > #size-cells = <1>; > + > + ths_calibration: thermal-sensor-calibration@14 { > + reg = <0x14 0x8>; > + }; > }; > > watchdog: watchdog@30090a0 { > @@ -517,6 +522,19 @@ mdio0: mdio { > }; > }; > > + ths: thermal-sensor@5070400 { > + compatible = "allwinner,sun50i-h616-ths"; > + reg = <0x05070400 0x400>; > + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&ccu CLK_BUS_THS>; > + clock-names = "bus"; > + resets = <&ccu RST_BUS_THS>; > + nvmem-cells = <&ths_calibration>; > + nvmem-cell-names = "calibration"; > + allwinner,sram = <&syscon>; > + #thermal-sensor-cells = <1>; > + }; > + > usbotg: usb@5100000 { > compatible = "allwinner,sun50i-h616-musb", > "allwinner,sun8i-h3-musb"; > @@ -761,4 +779,74 @@ r_rsb: rsb@7083000 { > #size-cells = <0>; > }; > }; > + > + thermal-zones { > + cpu-thermal { > + polling-delay-passive = <500>; > + polling-delay = <1000>; > + thermal-sensors = <&ths 2>; > + sustainable-power = <1000>; > + > + trips { > + cpu_threshold: cpu-trip-0 { > + temperature = <60000>; > + type = "passive"; > + hysteresis = <0>; > + }; > + cpu_target: cpu-trip-1 { > + temperature = <70000>; > + type = "passive"; > + hysteresis = <0>; > + }; > + cpu_critical: cpu-trip-2 { > + temperature = <110000>; > + type = "critical"; > + hysteresis = <0>; > + }; > + }; > + }; > + > + gpu-thermal { > + polling-delay-passive = <500>; > + polling-delay = <1000>; > + thermal-sensors = <&ths 0>; > + sustainable-power = <1100>; > + > + trips { > + gpu_temp_critical: gpu-trip-0 { > + temperature = <110000>; > + type = "critical"; > + hysteresis = <0>; > + }; > + }; > + }; > + > + ve-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + thermal-sensors = <&ths 1>; > + > + trips { > + ve_temp_critical: ve-trip-0 { > + temperature = <110000>; > + type = "critical"; > + hysteresis = <0>; > + }; > + }; > + }; > + > + ddr-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + thermal-sensors = <&ths 3>; > + > + trips { > + ddr_temp_critical: ddr-trip-0 { > + temperature = <110000>; > + type = "critical"; > + hysteresis = <0>; > + }; > + }; > + }; > + }; > }; >
Dne ponedeljek, 19. februar 2024 ob 16:36:39 CET je Andre Przywara napisal(a): > From: Martin Botka <martin.botka@somainline.org> > > There are four thermal sensors: > - CPU > - GPU > - VE > - DRAM > > Add the thermal sensor configuration and the thermal zones. > > Signed-off-by: Martin Botka <martin.botka@somainline.org> > Signed-off-by: Andre Przywara <andre.przywara@arm.com> I can't cleanly apply patch on top of sunxi/dt-for-6.9. Can you please rebase? Best regards, Jernej > --- > .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 88 +++++++++++++++++++ > 1 file changed, 88 insertions(+) > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi > index 12ffabc79bcde..7c7d7c285505c 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi > @@ -9,6 +9,7 @@ > #include <dt-bindings/clock/sun6i-rtc.h> > #include <dt-bindings/reset/sun50i-h616-ccu.h> > #include <dt-bindings/reset/sun50i-h6-r-ccu.h> > +#include <dt-bindings/thermal/thermal.h> > > / { > interrupt-parent = <&gic>; > @@ -138,6 +139,10 @@ sid: efuse@3006000 { > reg = <0x03006000 0x1000>; > #address-cells = <1>; > #size-cells = <1>; > + > + ths_calibration: thermal-sensor-calibration@14 { > + reg = <0x14 0x8>; > + }; > }; > > watchdog: watchdog@30090a0 { > @@ -517,6 +522,19 @@ mdio0: mdio { > }; > }; > > + ths: thermal-sensor@5070400 { > + compatible = "allwinner,sun50i-h616-ths"; > + reg = <0x05070400 0x400>; > + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&ccu CLK_BUS_THS>; > + clock-names = "bus"; > + resets = <&ccu RST_BUS_THS>; > + nvmem-cells = <&ths_calibration>; > + nvmem-cell-names = "calibration"; > + allwinner,sram = <&syscon>; > + #thermal-sensor-cells = <1>; > + }; > + > usbotg: usb@5100000 { > compatible = "allwinner,sun50i-h616-musb", > "allwinner,sun8i-h3-musb"; > @@ -761,4 +779,74 @@ r_rsb: rsb@7083000 { > #size-cells = <0>; > }; > }; > + > + thermal-zones { > + cpu-thermal { > + polling-delay-passive = <500>; > + polling-delay = <1000>; > + thermal-sensors = <&ths 2>; > + sustainable-power = <1000>; > + > + trips { > + cpu_threshold: cpu-trip-0 { > + temperature = <60000>; > + type = "passive"; > + hysteresis = <0>; > + }; > + cpu_target: cpu-trip-1 { > + temperature = <70000>; > + type = "passive"; > + hysteresis = <0>; > + }; > + cpu_critical: cpu-trip-2 { > + temperature = <110000>; > + type = "critical"; > + hysteresis = <0>; > + }; > + }; > + }; > + > + gpu-thermal { > + polling-delay-passive = <500>; > + polling-delay = <1000>; > + thermal-sensors = <&ths 0>; > + sustainable-power = <1100>; > + > + trips { > + gpu_temp_critical: gpu-trip-0 { > + temperature = <110000>; > + type = "critical"; > + hysteresis = <0>; > + }; > + }; > + }; > + > + ve-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + thermal-sensors = <&ths 1>; > + > + trips { > + ve_temp_critical: ve-trip-0 { > + temperature = <110000>; > + type = "critical"; > + hysteresis = <0>; > + }; > + }; > + }; > + > + ddr-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + thermal-sensors = <&ths 3>; > + > + trips { > + ddr_temp_critical: ddr-trip-0 { > + temperature = <110000>; > + type = "critical"; > + hysteresis = <0>; > + }; > + }; > + }; > + }; > }; >
Dne petek, 23. februar 2024 ob 20:59:08 CET je Jernej Škrabec napisal(a): > Dne ponedeljek, 19. februar 2024 ob 16:36:39 CET je Andre Przywara napisal(a): > > From: Martin Botka <martin.botka@somainline.org> > > > > There are four thermal sensors: > > - CPU > > - GPU > > - VE > > - DRAM > > > > Add the thermal sensor configuration and the thermal zones. > > > > Signed-off-by: Martin Botka <martin.botka@somainline.org> > > Signed-off-by: Andre Przywara <andre.przywara@arm.com> > > I can't cleanly apply patch on top of sunxi/dt-for-6.9. Can you please rebase? I rebased and applied. Thanks! Best regards, Jernej > > --- > > .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 88 +++++++++++++++++++ > > 1 file changed, 88 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi > > index 12ffabc79bcde..7c7d7c285505c 100644 > > --- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi > > @@ -9,6 +9,7 @@ > > #include <dt-bindings/clock/sun6i-rtc.h> > > #include <dt-bindings/reset/sun50i-h616-ccu.h> > > #include <dt-bindings/reset/sun50i-h6-r-ccu.h> > > +#include <dt-bindings/thermal/thermal.h> > > > > / { > > interrupt-parent = <&gic>; > > @@ -138,6 +139,10 @@ sid: efuse@3006000 { > > reg = <0x03006000 0x1000>; > > #address-cells = <1>; > > #size-cells = <1>; > > + > > + ths_calibration: thermal-sensor-calibration@14 { > > + reg = <0x14 0x8>; > > + }; > > }; > > > > watchdog: watchdog@30090a0 { > > @@ -517,6 +522,19 @@ mdio0: mdio { > > }; > > }; > > > > + ths: thermal-sensor@5070400 { > > + compatible = "allwinner,sun50i-h616-ths"; > > + reg = <0x05070400 0x400>; > > + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&ccu CLK_BUS_THS>; > > + clock-names = "bus"; > > + resets = <&ccu RST_BUS_THS>; > > + nvmem-cells = <&ths_calibration>; > > + nvmem-cell-names = "calibration"; > > + allwinner,sram = <&syscon>; > > + #thermal-sensor-cells = <1>; > > + }; > > + > > usbotg: usb@5100000 { > > compatible = "allwinner,sun50i-h616-musb", > > "allwinner,sun8i-h3-musb"; > > @@ -761,4 +779,74 @@ r_rsb: rsb@7083000 { > > #size-cells = <0>; > > }; > > }; > > + > > + thermal-zones { > > + cpu-thermal { > > + polling-delay-passive = <500>; > > + polling-delay = <1000>; > > + thermal-sensors = <&ths 2>; > > + sustainable-power = <1000>; > > + > > + trips { > > + cpu_threshold: cpu-trip-0 { > > + temperature = <60000>; > > + type = "passive"; > > + hysteresis = <0>; > > + }; > > + cpu_target: cpu-trip-1 { > > + temperature = <70000>; > > + type = "passive"; > > + hysteresis = <0>; > > + }; > > + cpu_critical: cpu-trip-2 { > > + temperature = <110000>; > > + type = "critical"; > > + hysteresis = <0>; > > + }; > > + }; > > + }; > > + > > + gpu-thermal { > > + polling-delay-passive = <500>; > > + polling-delay = <1000>; > > + thermal-sensors = <&ths 0>; > > + sustainable-power = <1100>; > > + > > + trips { > > + gpu_temp_critical: gpu-trip-0 { > > + temperature = <110000>; > > + type = "critical"; > > + hysteresis = <0>; > > + }; > > + }; > > + }; > > + > > + ve-thermal { > > + polling-delay-passive = <0>; > > + polling-delay = <0>; > > + thermal-sensors = <&ths 1>; > > + > > + trips { > > + ve_temp_critical: ve-trip-0 { > > + temperature = <110000>; > > + type = "critical"; > > + hysteresis = <0>; > > + }; > > + }; > > + }; > > + > > + ddr-thermal { > > + polling-delay-passive = <0>; > > + polling-delay = <0>; > > + thermal-sensors = <&ths 3>; > > + > > + trips { > > + ddr_temp_critical: ddr-trip-0 { > > + temperature = <110000>; > > + type = "critical"; > > + hysteresis = <0>; > > + }; > > + }; > > + }; > > + }; > > }; > > > > > > >
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi index 12ffabc79bcde..7c7d7c285505c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/clock/sun6i-rtc.h> #include <dt-bindings/reset/sun50i-h616-ccu.h> #include <dt-bindings/reset/sun50i-h6-r-ccu.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&gic>; @@ -138,6 +139,10 @@ sid: efuse@3006000 { reg = <0x03006000 0x1000>; #address-cells = <1>; #size-cells = <1>; + + ths_calibration: thermal-sensor-calibration@14 { + reg = <0x14 0x8>; + }; }; watchdog: watchdog@30090a0 { @@ -517,6 +522,19 @@ mdio0: mdio { }; }; + ths: thermal-sensor@5070400 { + compatible = "allwinner,sun50i-h616-ths"; + reg = <0x05070400 0x400>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_THS>; + clock-names = "bus"; + resets = <&ccu RST_BUS_THS>; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; + allwinner,sram = <&syscon>; + #thermal-sensor-cells = <1>; + }; + usbotg: usb@5100000 { compatible = "allwinner,sun50i-h616-musb", "allwinner,sun8i-h3-musb"; @@ -761,4 +779,74 @@ r_rsb: rsb@7083000 { #size-cells = <0>; }; }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <500>; + polling-delay = <1000>; + thermal-sensors = <&ths 2>; + sustainable-power = <1000>; + + trips { + cpu_threshold: cpu-trip-0 { + temperature = <60000>; + type = "passive"; + hysteresis = <0>; + }; + cpu_target: cpu-trip-1 { + temperature = <70000>; + type = "passive"; + hysteresis = <0>; + }; + cpu_critical: cpu-trip-2 { + temperature = <110000>; + type = "critical"; + hysteresis = <0>; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <500>; + polling-delay = <1000>; + thermal-sensors = <&ths 0>; + sustainable-power = <1100>; + + trips { + gpu_temp_critical: gpu-trip-0 { + temperature = <110000>; + type = "critical"; + hysteresis = <0>; + }; + }; + }; + + ve-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 1>; + + trips { + ve_temp_critical: ve-trip-0 { + temperature = <110000>; + type = "critical"; + hysteresis = <0>; + }; + }; + }; + + ddr-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 3>; + + trips { + ddr_temp_critical: ddr-trip-0 { + temperature = <110000>; + type = "critical"; + hysteresis = <0>; + }; + }; + }; + }; };