@@ -67,10 +67,14 @@
#define LVTS_CALSCALE_CONF 0x300
#define LVTS_MONINT_CONF 0x0300318C
-#define LVTS_MONINT_OFFSET_SENSOR0 0xC
-#define LVTS_MONINT_OFFSET_SENSOR1 0x180
-#define LVTS_MONINT_OFFSET_SENSOR2 0x3000
-#define LVTS_MONINT_OFFSET_SENSOR3 0x3000000
+#define LVTS_MONINT_OFFSET_HIGH_SENSOR0 BIT(3)
+#define LVTS_MONINT_OFFSET_HIGH_SENSOR1 BIT(8)
+#define LVTS_MONINT_OFFSET_HIGH_SENSOR2 BIT(13)
+#define LVTS_MONINT_OFFSET_HIGH_SENSOR3 BIT(25)
+#define LVTS_MONINT_OFFSET_LOW_SENSOR0 BIT(2)
+#define LVTS_MONINT_OFFSET_LOW_SENSOR1 BIT(7)
+#define LVTS_MONINT_OFFSET_LOW_SENSOR2 BIT(12)
+#define LVTS_MONINT_OFFSET_LOW_SENSOR3 BIT(24)
#define LVTS_INT_SENSOR0 0x0009001F
#define LVTS_INT_SENSOR1 0x001203E0
@@ -326,11 +330,17 @@ static int lvts_get_temp(struct thermal_zone_device *tz, int *temp)
static void lvts_update_irq_mask(struct lvts_ctrl *lvts_ctrl)
{
- u32 masks[] = {
- LVTS_MONINT_OFFSET_SENSOR0,
- LVTS_MONINT_OFFSET_SENSOR1,
- LVTS_MONINT_OFFSET_SENSOR2,
- LVTS_MONINT_OFFSET_SENSOR3,
+ u32 high_offset_masks[] = {
+ LVTS_MONINT_OFFSET_HIGH_SENSOR0,
+ LVTS_MONINT_OFFSET_HIGH_SENSOR1,
+ LVTS_MONINT_OFFSET_HIGH_SENSOR2,
+ LVTS_MONINT_OFFSET_HIGH_SENSOR3,
+ };
+ u32 low_offset_masks[] = {
+ LVTS_MONINT_OFFSET_LOW_SENSOR0,
+ LVTS_MONINT_OFFSET_LOW_SENSOR1,
+ LVTS_MONINT_OFFSET_LOW_SENSOR2,
+ LVTS_MONINT_OFFSET_LOW_SENSOR3,
};
u32 value = 0;
int i;
@@ -339,10 +349,22 @@ static void lvts_update_irq_mask(struct lvts_ctrl *lvts_ctrl)
for (i = 0; i < ARRAY_SIZE(masks); i++) {
if (lvts_ctrl->sensors[i].high_thresh == lvts_ctrl->high_thresh
- && lvts_ctrl->sensors[i].low_thresh == lvts_ctrl->low_thresh)
- value |= masks[i];
- else
- value &= ~masks[i];
+ && lvts_ctrl->sensors[i].low_thresh == lvts_ctrl->low_thresh) {
+ /*
+ * The minimum threshold needs to be configured in the
+ * OFFSETL register to get working interrupts, but we
+ * don't actually want to generate interrupts when
+ * crossing it.
+ */
+ if (lvts_ctrl->low_thresh == -INT_MAX) {
+ value &= ~low_offset_masks[i];
+ value |= high_offset_masks[i];
+ } else {
+ value |= low_offset_masks[i] | high_offset_masks[i];
+ }
+ } else {
+ value &= ~(low_offset_masks[i] | high_offset_masks[i]);
+ }
}
writel(value, LVTS_MONINT(lvts_ctrl->base));
In order to get working interrupts, a low offset value needs to be configured. The minimum value for it is 20 Celsius, which is what is configured when there's no lower thermal trip (ie the thermal core passes -INT_MAX as low trip temperature). However, when the temperature gets that low and fluctuates around that value it causes an interrupt storm. Prevent that interrupt storm by not enabling the low offset interrupt if the low threshold is the minimum one. Cc: stable@vger.kernel.org Fixes: 77354eaef821 ("thermal/drivers/mediatek/lvts_thermal: Don't leave threshold zeroed") Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> --- drivers/thermal/mediatek/lvts_thermal.c | 48 ++++++++++++++++++++++++--------- 1 file changed, 35 insertions(+), 13 deletions(-)