| Message ID | 20241202151228.32609-1-ansuelsmth@gmail.com (mailing list archive) |
|---|---|
| State | New |
| Delegated to: | viresh kumar |
| Headers | show |
| Series | [v4,1/2] dt-bindings: cpufreq: Document support for Airoha EN7581 CPUFreq | expand |
On Mon, 2 Dec 2024 at 16:20, Christian Marangi <ansuelsmth@gmail.com> wrote: > > Document required property for Airoha EN7581 CPUFreq . > > On newer Airoha SoC, CPU Frequency is scaled indirectly with SMCCC commands > to ATF and no clocks are exposed to the OS. > > The SoC have performance state described by ID for each OPP, for this a > Power Domain is used that sets the performance state ID according to the > required OPPs defined in the CPU OPP tables. > > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> > --- > Changes v4: > - Add this patch > > .../cpufreq/airoha,en7581-cpufreq.yaml | 259 ++++++++++++++++++ > 1 file changed, 259 insertions(+) > create mode 100644 Documentation/devicetree/bindings/cpufreq/airoha,en7581-cpufreq.yaml > > diff --git a/Documentation/devicetree/bindings/cpufreq/airoha,en7581-cpufreq.yaml b/Documentation/devicetree/bindings/cpufreq/airoha,en7581-cpufreq.yaml > new file mode 100644 > index 000000000000..a5bdea7f34b5 > --- /dev/null > +++ b/Documentation/devicetree/bindings/cpufreq/airoha,en7581-cpufreq.yaml [...] > +examples: > + - | > + / { > + #address-cells = <2>; > + #size-cells = <2>; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + > + cpu0: cpu@0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53"; > + reg = <0x0>; > + operating-points-v2 = <&cpu_opp_table>; > + enable-method = "psci"; > + clocks = <&cpufreq>; > + clock-names = "cpu"; > + power-domains = <&cpufreq>; > + power-domain-names = "cpu_pd"; Nitpick: Perhaps clarify the name to be "perf" or "cpu_perf", to indicate it's a power-domain with performance scaling support. > + next-level-cache = <&l2>; > + #cooling-cells = <2>; > + }; > + [...] Other than the very minor thing above, feel free to add: Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Kind regards Uffe
On Mon, Dec 02, 2024 at 04:42:33PM +0100, Ulf Hansson wrote: > On Mon, 2 Dec 2024 at 16:20, Christian Marangi <ansuelsmth@gmail.com> wrote: > > > > Document required property for Airoha EN7581 CPUFreq . > > > > On newer Airoha SoC, CPU Frequency is scaled indirectly with SMCCC commands > > to ATF and no clocks are exposed to the OS. > > > > The SoC have performance state described by ID for each OPP, for this a > > Power Domain is used that sets the performance state ID according to the > > required OPPs defined in the CPU OPP tables. > > > > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> > > --- > > Changes v4: > > - Add this patch > > > > .../cpufreq/airoha,en7581-cpufreq.yaml | 259 ++++++++++++++++++ > > 1 file changed, 259 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/cpufreq/airoha,en7581-cpufreq.yaml > > > > diff --git a/Documentation/devicetree/bindings/cpufreq/airoha,en7581-cpufreq.yaml b/Documentation/devicetree/bindings/cpufreq/airoha,en7581-cpufreq.yaml > > new file mode 100644 > > index 000000000000..a5bdea7f34b5 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/cpufreq/airoha,en7581-cpufreq.yaml > > [...] > > > +examples: > > + - | > > + / { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + > > + cpus { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + cpu0: cpu@0 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a53"; > > + reg = <0x0>; > > + operating-points-v2 = <&cpu_opp_table>; > > + enable-method = "psci"; > > + clocks = <&cpufreq>; > > + clock-names = "cpu"; > > + power-domains = <&cpufreq>; > > + power-domain-names = "cpu_pd"; > > Nitpick: Perhaps clarify the name to be "perf" or "cpu_perf", to > indicate it's a power-domain with performance scaling support. > Will change to cpu_perf. Thanks a lot for the review! > > + next-level-cache = <&l2>; > > + #cooling-cells = <2>; > > + }; > > + > > [...] > > Other than the very minor thing above, feel free to add: > > Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> > > Kind regards > Uffe
On Mon, 02 Dec 2024 16:12:03 +0100, Christian Marangi wrote: > Document required property for Airoha EN7581 CPUFreq . > > On newer Airoha SoC, CPU Frequency is scaled indirectly with SMCCC commands > to ATF and no clocks are exposed to the OS. > > The SoC have performance state described by ID for each OPP, for this a > Power Domain is used that sets the performance state ID according to the > required OPPs defined in the CPU OPP tables. > > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> > --- > Changes v4: > - Add this patch > > .../cpufreq/airoha,en7581-cpufreq.yaml | 259 ++++++++++++++++++ > 1 file changed, 259 insertions(+) > create mode 100644 Documentation/devicetree/bindings/cpufreq/airoha,en7581-cpufreq.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/cpufreq/airoha,en7581-cpufreq.example.dtb: /: 'compatible' is a required property from schema $id: http://devicetree.org/schemas/root-node.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/cpufreq/airoha,en7581-cpufreq.example.dtb: /: 'model' is a required property from schema $id: http://devicetree.org/schemas/root-node.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/cpufreq/airoha,en7581-cpufreq.example.dtb: opp-table-cpu-smcc: $nodename:0: 'opp-table-cpu-smcc' does not match '^opp-table(-[a-z0-9]+)?$' from schema $id: http://devicetree.org/schemas/opp/opp-v2.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/cpufreq/airoha,en7581-cpufreq.example.dtb: opp-table-cpu-smcc: Unevaluated properties are not allowed ('opp0', 'opp1', 'opp10', 'opp11', 'opp12', 'opp13', 'opp14', 'opp2', 'opp3', 'opp4', 'opp5', 'opp6', 'opp7', 'opp8', 'opp9' were unexpected) from schema $id: http://devicetree.org/schemas/opp/opp-v2.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241202151228.32609-1-ansuelsmth@gmail.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
diff --git a/Documentation/devicetree/bindings/cpufreq/airoha,en7581-cpufreq.yaml b/Documentation/devicetree/bindings/cpufreq/airoha,en7581-cpufreq.yaml new file mode 100644 index 000000000000..a5bdea7f34b5 --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/airoha,en7581-cpufreq.yaml @@ -0,0 +1,259 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/cpufreq/airoha,en7581-cpufreq.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Airoha EN7581 CPUFreq + +maintainers: + - Christian Marangi <ansuelsmth@gmail.com> + +description: | + On newer Airoha SoC, CPU Frequency is scaled indirectly with SMCCC commands + to ATF and no clocks are exposed to the OS. + + The SoC have performance state described by ID for each OPP, for this a + Power Domain is used that sets the performance state ID according to the + required OPPs defined in the CPU OPP tables. + +properties: + compatible: + const: airoha,en7581-cpufreq + + '#clock-cells': + const: 0 + + '#power-domain-cells': + const: 0 + + operating-points-v2: true + +required: + - compatible + - '#clock-cells' + - '#power-domain-cells' + - operating-points-v2 + +additionalProperties: false + +examples: + - | + / { + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + operating-points-v2 = <&cpu_opp_table>; + enable-method = "psci"; + clocks = <&cpufreq>; + clock-names = "cpu"; + power-domains = <&cpufreq>; + power-domain-names = "cpu_pd"; + next-level-cache = <&l2>; + #cooling-cells = <2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + operating-points-v2 = <&cpu_opp_table>; + enable-method = "psci"; + clocks = <&cpufreq>; + clock-names = "cpu"; + power-domains = <&cpufreq>; + power-domain-names = "cpu_pd"; + next-level-cache = <&l2>; + #cooling-cells = <2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + operating-points-v2 = <&cpu_opp_table>; + enable-method = "psci"; + clocks = <&cpufreq>; + clock-names = "cpu"; + power-domains = <&cpufreq>; + power-domain-names = "cpu_pd"; + next-level-cache = <&l2>; + #cooling-cells = <2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + operating-points-v2 = <&cpu_opp_table>; + enable-method = "psci"; + clocks = <&cpufreq>; + clock-names = "cpu"; + power-domains = <&cpufreq>; + power-domain-names = "cpu_pd"; + next-level-cache = <&l2>; + #cooling-cells = <2>; + }; + }; + + cpu_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + required-opps = <&smcc_opp0>; + }; + + opp-550000000 { + opp-hz = /bits/ 64 <550000000>; + required-opps = <&smcc_opp1>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + required-opps = <&smcc_opp2>; + }; + + opp-650000000 { + opp-hz = /bits/ 64 <650000000>; + required-opps = <&smcc_opp3>; + }; + + opp-7000000000 { + opp-hz = /bits/ 64 <700000000>; + required-opps = <&smcc_opp4>; + }; + + opp-7500000000 { + opp-hz = /bits/ 64 <750000000>; + required-opps = <&smcc_opp5>; + }; + + opp-8000000000 { + opp-hz = /bits/ 64 <800000000>; + required-opps = <&smcc_opp6>; + }; + + opp-8500000000 { + opp-hz = /bits/ 64 <850000000>; + required-opps = <&smcc_opp7>; + }; + + opp-9000000000 { + opp-hz = /bits/ 64 <900000000>; + required-opps = <&smcc_opp8>; + }; + + opp-9500000000 { + opp-hz = /bits/ 64 <950000000>; + required-opps = <&smcc_opp9>; + }; + + opp-10000000000 { + opp-hz = /bits/ 64 <1000000000>; + required-opps = <&smcc_opp10>; + }; + + opp-10500000000 { + opp-hz = /bits/ 64 <1050000000>; + required-opps = <&smcc_opp11>; + }; + + opp-11000000000 { + opp-hz = /bits/ 64 <1100000000>; + required-opps = <&smcc_opp12>; + }; + + opp-11500000000 { + opp-hz = /bits/ 64 <1150000000>; + required-opps = <&smcc_opp13>; + }; + + opp-12000000000 { + opp-hz = /bits/ 64 <1200000000>; + required-opps = <&smcc_opp14>; + }; + }; + + cpu_smcc_opp_table: opp-table-cpu-smcc { + compatible = "operating-points-v2"; + + smcc_opp0: opp0 { + opp-level = <0>; + }; + + smcc_opp1: opp1 { + opp-level = <1>; + }; + + smcc_opp2: opp2 { + opp-level = <2>; + }; + + smcc_opp3: opp3 { + opp-level = <3>; + }; + + smcc_opp4: opp4 { + opp-level = <4>; + }; + + smcc_opp5: opp5 { + opp-level = <5>; + }; + + smcc_opp6: opp6 { + opp-level = <6>; + }; + + smcc_opp7: opp7 { + opp-level = <7>; + }; + + smcc_opp8: opp8 { + opp-level = <8>; + }; + + smcc_opp9: opp9 { + opp-level = <9>; + }; + + smcc_opp10: opp10 { + opp-level = <10>; + }; + + smcc_opp11: opp11 { + opp-level = <11>; + }; + + smcc_opp12: opp12 { + opp-level = <12>; + }; + + smcc_opp13: opp13 { + opp-level = <13>; + }; + + smcc_opp14: opp14 { + opp-level = <14>; + }; + }; + + cpufreq: cpufreq { + compatible = "airoha,en7581-cpufreq"; + + operating-points-v2 = <&cpu_smcc_opp_table>; + + #power-domain-cells = <0>; + #clock-cells = <0>; + }; + };
Document required property for Airoha EN7581 CPUFreq . On newer Airoha SoC, CPU Frequency is scaled indirectly with SMCCC commands to ATF and no clocks are exposed to the OS. The SoC have performance state described by ID for each OPP, for this a Power Domain is used that sets the performance state ID according to the required OPPs defined in the CPU OPP tables. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> --- Changes v4: - Add this patch .../cpufreq/airoha,en7581-cpufreq.yaml | 259 ++++++++++++++++++ 1 file changed, 259 insertions(+) create mode 100644 Documentation/devicetree/bindings/cpufreq/airoha,en7581-cpufreq.yaml