@@ -1,22 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
-config CPU_FREQ_CBE
- tristate "CBE frequency scaling"
- depends on CBE_RAS && PPC_CELL
- default m
- help
- This adds the cpufreq driver for Cell BE processors.
- For details, take a look at <file:Documentation/cpu-freq/>.
- If you don't have such processor, say N
-
-config CPU_FREQ_CBE_PMI
- bool "CBE frequency scaling using PMI interface"
- depends on CPU_FREQ_CBE
- default n
- help
- Select this, if you want to use the PMI interface to switch
- frequencies. Using PMI, the processor will not only be able to run at
- lower speed, but also at lower core voltage.
-
config CPU_FREQ_PMAC
bool "Support for Apple PowerBooks"
depends on ADB_PMU && PPC32
@@ -90,9 +90,6 @@ obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ) += vexpress-spc-cpufreq.o
##################################################################################
# PowerPC platform drivers
-obj-$(CONFIG_CPU_FREQ_CBE) += ppc-cbe-cpufreq.o
-ppc-cbe-cpufreq-y += ppc_cbe_cpufreq_pervasive.o ppc_cbe_cpufreq.o
-obj-$(CONFIG_CPU_FREQ_CBE_PMI) += ppc_cbe_cpufreq_pmi.o
obj-$(CONFIG_QORIQ_CPUFREQ) += qoriq-cpufreq.o
obj-$(CONFIG_CPU_FREQ_PMAC) += pmac32-cpufreq.o
obj-$(CONFIG_CPU_FREQ_PMAC64) += pmac64-cpufreq.o
deleted file mode 100644
@@ -1,173 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * cpufreq driver for the cell processor
- *
- * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007
- *
- * Author: Christian Krafft <krafft@de.ibm.com>
- */
-
-#include <linux/cpufreq.h>
-#include <linux/module.h>
-#include <linux/of.h>
-
-#include <asm/machdep.h>
-#include <asm/cell-regs.h>
-
-#include "ppc_cbe_cpufreq.h"
-
-/* the CBE supports an 8 step frequency scaling */
-static struct cpufreq_frequency_table cbe_freqs[] = {
- {0, 1, 0},
- {0, 2, 0},
- {0, 3, 0},
- {0, 4, 0},
- {0, 5, 0},
- {0, 6, 0},
- {0, 8, 0},
- {0, 10, 0},
- {0, 0, CPUFREQ_TABLE_END},
-};
-
-/*
- * hardware specific functions
- */
-
-static int set_pmode(unsigned int cpu, unsigned int slow_mode)
-{
- int rc;
-
- if (cbe_cpufreq_has_pmi)
- rc = cbe_cpufreq_set_pmode_pmi(cpu, slow_mode);
- else
- rc = cbe_cpufreq_set_pmode(cpu, slow_mode);
-
- pr_debug("register contains slow mode %d\n", cbe_cpufreq_get_pmode(cpu));
-
- return rc;
-}
-
-/*
- * cpufreq functions
- */
-
-static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy)
-{
- struct cpufreq_frequency_table *pos;
- const u32 *max_freqp;
- u32 max_freq;
- int cur_pmode;
- struct device_node *cpu;
-
- cpu = of_get_cpu_node(policy->cpu, NULL);
-
- if (!cpu)
- return -ENODEV;
-
- pr_debug("init cpufreq on CPU %d\n", policy->cpu);
-
- /*
- * Let's check we can actually get to the CELL regs
- */
- if (!cbe_get_cpu_pmd_regs(policy->cpu) ||
- !cbe_get_cpu_mic_tm_regs(policy->cpu)) {
- pr_info("invalid CBE regs pointers for cpufreq\n");
- of_node_put(cpu);
- return -EINVAL;
- }
-
- max_freqp = of_get_property(cpu, "clock-frequency", NULL);
-
- of_node_put(cpu);
-
- if (!max_freqp)
- return -EINVAL;
-
- /* we need the freq in kHz */
- max_freq = *max_freqp / 1000;
-
- pr_debug("max clock-frequency is at %u kHz\n", max_freq);
- pr_debug("initializing frequency table\n");
-
- /* initialize frequency table */
- cpufreq_for_each_entry(pos, cbe_freqs) {
- pos->frequency = max_freq / pos->driver_data;
- pr_debug("%d: %d\n", (int)(pos - cbe_freqs), pos->frequency);
- }
-
- /* if DEBUG is enabled set_pmode() measures the latency
- * of a transition */
- policy->cpuinfo.transition_latency = 25000;
-
- cur_pmode = cbe_cpufreq_get_pmode(policy->cpu);
- pr_debug("current pmode is at %d\n",cur_pmode);
-
- policy->cur = cbe_freqs[cur_pmode].frequency;
-
-#ifdef CONFIG_SMP
- cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu));
-#endif
-
- policy->freq_table = cbe_freqs;
- cbe_cpufreq_pmi_policy_init(policy);
- return 0;
-}
-
-static void cbe_cpufreq_cpu_exit(struct cpufreq_policy *policy)
-{
- cbe_cpufreq_pmi_policy_exit(policy);
-}
-
-static int cbe_cpufreq_target(struct cpufreq_policy *policy,
- unsigned int cbe_pmode_new)
-{
- pr_debug("setting frequency for cpu %d to %d kHz, " \
- "1/%d of max frequency\n",
- policy->cpu,
- cbe_freqs[cbe_pmode_new].frequency,
- cbe_freqs[cbe_pmode_new].driver_data);
-
- return set_pmode(policy->cpu, cbe_pmode_new);
-}
-
-static struct cpufreq_driver cbe_cpufreq_driver = {
- .verify = cpufreq_generic_frequency_table_verify,
- .target_index = cbe_cpufreq_target,
- .init = cbe_cpufreq_cpu_init,
- .exit = cbe_cpufreq_cpu_exit,
- .name = "cbe-cpufreq",
- .flags = CPUFREQ_CONST_LOOPS,
-};
-
-/*
- * module init and destoy
- */
-
-static int __init cbe_cpufreq_init(void)
-{
- int ret;
-
- if (!machine_is(cell))
- return -ENODEV;
-
- cbe_cpufreq_pmi_init();
-
- ret = cpufreq_register_driver(&cbe_cpufreq_driver);
- if (ret)
- cbe_cpufreq_pmi_exit();
-
- return ret;
-}
-
-static void __exit cbe_cpufreq_exit(void)
-{
- cpufreq_unregister_driver(&cbe_cpufreq_driver);
- cbe_cpufreq_pmi_exit();
-}
-
-module_init(cbe_cpufreq_init);
-module_exit(cbe_cpufreq_exit);
-
-MODULE_DESCRIPTION("cpufreq driver for Cell BE processors");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>");
deleted file mode 100644
@@ -1,33 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * ppc_cbe_cpufreq.h
- *
- * This file contains the definitions used by the cbe_cpufreq driver.
- *
- * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007
- *
- * Author: Christian Krafft <krafft@de.ibm.com>
- *
- */
-
-#include <linux/cpufreq.h>
-#include <linux/types.h>
-
-int cbe_cpufreq_set_pmode(int cpu, unsigned int pmode);
-int cbe_cpufreq_get_pmode(int cpu);
-
-int cbe_cpufreq_set_pmode_pmi(int cpu, unsigned int pmode);
-
-#if IS_ENABLED(CONFIG_CPU_FREQ_CBE_PMI)
-extern bool cbe_cpufreq_has_pmi;
-void cbe_cpufreq_pmi_policy_init(struct cpufreq_policy *policy);
-void cbe_cpufreq_pmi_policy_exit(struct cpufreq_policy *policy);
-void cbe_cpufreq_pmi_init(void);
-void cbe_cpufreq_pmi_exit(void);
-#else
-#define cbe_cpufreq_has_pmi (0)
-static inline void cbe_cpufreq_pmi_policy_init(struct cpufreq_policy *policy) {}
-static inline void cbe_cpufreq_pmi_policy_exit(struct cpufreq_policy *policy) {}
-static inline void cbe_cpufreq_pmi_init(void) {}
-static inline void cbe_cpufreq_pmi_exit(void) {}
-#endif
deleted file mode 100644
@@ -1,102 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * pervasive backend for the cbe_cpufreq driver
- *
- * This driver makes use of the pervasive unit to
- * engage the desired frequency.
- *
- * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007
- *
- * Author: Christian Krafft <krafft@de.ibm.com>
- */
-
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/time.h>
-#include <asm/machdep.h>
-#include <asm/hw_irq.h>
-#include <asm/cell-regs.h>
-
-#include "ppc_cbe_cpufreq.h"
-
-/* to write to MIC register */
-static u64 MIC_Slow_Fast_Timer_table[] = {
- [0 ... 7] = 0x007fc00000000000ull,
-};
-
-/* more values for the MIC */
-static u64 MIC_Slow_Next_Timer_table[] = {
- 0x0000240000000000ull,
- 0x0000268000000000ull,
- 0x000029C000000000ull,
- 0x00002D0000000000ull,
- 0x0000300000000000ull,
- 0x0000334000000000ull,
- 0x000039C000000000ull,
- 0x00003FC000000000ull,
-};
-
-
-int cbe_cpufreq_set_pmode(int cpu, unsigned int pmode)
-{
- struct cbe_pmd_regs __iomem *pmd_regs;
- struct cbe_mic_tm_regs __iomem *mic_tm_regs;
- unsigned long flags;
- u64 value;
-#ifdef DEBUG
- long time;
-#endif
-
- local_irq_save(flags);
-
- mic_tm_regs = cbe_get_cpu_mic_tm_regs(cpu);
- pmd_regs = cbe_get_cpu_pmd_regs(cpu);
-
-#ifdef DEBUG
- time = jiffies;
-#endif
-
- out_be64(&mic_tm_regs->slow_fast_timer_0, MIC_Slow_Fast_Timer_table[pmode]);
- out_be64(&mic_tm_regs->slow_fast_timer_1, MIC_Slow_Fast_Timer_table[pmode]);
-
- out_be64(&mic_tm_regs->slow_next_timer_0, MIC_Slow_Next_Timer_table[pmode]);
- out_be64(&mic_tm_regs->slow_next_timer_1, MIC_Slow_Next_Timer_table[pmode]);
-
- value = in_be64(&pmd_regs->pmcr);
- /* set bits to zero */
- value &= 0xFFFFFFFFFFFFFFF8ull;
- /* set bits to next pmode */
- value |= pmode;
-
- out_be64(&pmd_regs->pmcr, value);
-
-#ifdef DEBUG
- /* wait until new pmode appears in status register */
- value = in_be64(&pmd_regs->pmsr) & 0x07;
- while (value != pmode) {
- cpu_relax();
- value = in_be64(&pmd_regs->pmsr) & 0x07;
- }
-
- time = jiffies - time;
- time = jiffies_to_msecs(time);
- pr_debug("had to wait %lu ms for a transition using " \
- "pervasive unit\n", time);
-#endif
- local_irq_restore(flags);
-
- return 0;
-}
-
-
-int cbe_cpufreq_get_pmode(int cpu)
-{
- int ret;
- struct cbe_pmd_regs __iomem *pmd_regs;
-
- pmd_regs = cbe_get_cpu_pmd_regs(cpu);
- ret = in_be64(&pmd_regs->pmsr) & 0x07;
-
- return ret;
-}
-
deleted file mode 100644
@@ -1,150 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * pmi backend for the cbe_cpufreq driver
- *
- * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007
- *
- * Author: Christian Krafft <krafft@de.ibm.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/pm_qos.h>
-#include <linux/slab.h>
-
-#include <asm/processor.h>
-#include <asm/pmi.h>
-#include <asm/cell-regs.h>
-
-#ifdef DEBUG
-#include <asm/time.h>
-#endif
-
-#include "ppc_cbe_cpufreq.h"
-
-bool cbe_cpufreq_has_pmi = false;
-EXPORT_SYMBOL_GPL(cbe_cpufreq_has_pmi);
-
-/*
- * hardware specific functions
- */
-
-int cbe_cpufreq_set_pmode_pmi(int cpu, unsigned int pmode)
-{
- int ret;
- pmi_message_t pmi_msg;
-#ifdef DEBUG
- long time;
-#endif
- pmi_msg.type = PMI_TYPE_FREQ_CHANGE;
- pmi_msg.data1 = cbe_cpu_to_node(cpu);
- pmi_msg.data2 = pmode;
-
-#ifdef DEBUG
- time = jiffies;
-#endif
- pmi_send_message(pmi_msg);
-
-#ifdef DEBUG
- time = jiffies - time;
- time = jiffies_to_msecs(time);
- pr_debug("had to wait %lu ms for a transition using " \
- "PMI\n", time);
-#endif
- ret = pmi_msg.data2;
- pr_debug("PMI returned slow mode %d\n", ret);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(cbe_cpufreq_set_pmode_pmi);
-
-
-static void cbe_cpufreq_handle_pmi(pmi_message_t pmi_msg)
-{
- struct cpufreq_policy *policy;
- struct freq_qos_request *req;
- u8 node, slow_mode;
- int cpu, ret;
-
- BUG_ON(pmi_msg.type != PMI_TYPE_FREQ_CHANGE);
-
- node = pmi_msg.data1;
- slow_mode = pmi_msg.data2;
-
- cpu = cbe_node_to_cpu(node);
-
- pr_debug("cbe_handle_pmi: node: %d max_freq: %d\n", node, slow_mode);
-
- policy = cpufreq_cpu_get(cpu);
- if (!policy) {
- pr_warn("cpufreq policy not found cpu%d\n", cpu);
- return;
- }
-
- req = policy->driver_data;
-
- ret = freq_qos_update_request(req,
- policy->freq_table[slow_mode].frequency);
- if (ret < 0)
- pr_warn("Failed to update freq constraint: %d\n", ret);
- else
- pr_debug("limiting node %d to slow mode %d\n", node, slow_mode);
-
- cpufreq_cpu_put(policy);
-}
-
-static struct pmi_handler cbe_pmi_handler = {
- .type = PMI_TYPE_FREQ_CHANGE,
- .handle_pmi_message = cbe_cpufreq_handle_pmi,
-};
-
-void cbe_cpufreq_pmi_policy_init(struct cpufreq_policy *policy)
-{
- struct freq_qos_request *req;
- int ret;
-
- if (!cbe_cpufreq_has_pmi)
- return;
-
- req = kzalloc(sizeof(*req), GFP_KERNEL);
- if (!req)
- return;
-
- ret = freq_qos_add_request(&policy->constraints, req, FREQ_QOS_MAX,
- policy->freq_table[0].frequency);
- if (ret < 0) {
- pr_err("Failed to add freq constraint (%d)\n", ret);
- kfree(req);
- return;
- }
-
- policy->driver_data = req;
-}
-EXPORT_SYMBOL_GPL(cbe_cpufreq_pmi_policy_init);
-
-void cbe_cpufreq_pmi_policy_exit(struct cpufreq_policy *policy)
-{
- struct freq_qos_request *req = policy->driver_data;
-
- if (cbe_cpufreq_has_pmi) {
- freq_qos_remove_request(req);
- kfree(req);
- }
-}
-EXPORT_SYMBOL_GPL(cbe_cpufreq_pmi_policy_exit);
-
-void cbe_cpufreq_pmi_init(void)
-{
- if (!pmi_register_handler(&cbe_pmi_handler))
- cbe_cpufreq_has_pmi = true;
-}
-EXPORT_SYMBOL_GPL(cbe_cpufreq_pmi_init);
-
-void cbe_cpufreq_pmi_exit(void)
-{
- pmi_unregister_handler(&cbe_pmi_handler);
- cbe_cpufreq_has_pmi = false;
-}
-EXPORT_SYMBOL_GPL(cbe_cpufreq_pmi_exit);
This driver can no longer be built since support for IBM Cell Blades was removed, in particular CBE_RAS. Remove the driver. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> --- v2: Unchanged. Cc: linux-pm@vger.kernel.org drivers/cpufreq/Kconfig.powerpc | 18 -- drivers/cpufreq/Makefile | 3 - drivers/cpufreq/ppc_cbe_cpufreq.c | 173 -------------------- drivers/cpufreq/ppc_cbe_cpufreq.h | 33 ---- drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c | 102 ------------ drivers/cpufreq/ppc_cbe_cpufreq_pmi.c | 150 ----------------- 6 files changed, 479 deletions(-) delete mode 100644 drivers/cpufreq/ppc_cbe_cpufreq.c delete mode 100644 drivers/cpufreq/ppc_cbe_cpufreq.h delete mode 100644 drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c delete mode 100644 drivers/cpufreq/ppc_cbe_cpufreq_pmi.c