| Message ID | 20e229f191031b0b0bff96dee118d1f2d988d7b3.1448263428.git.atx@atx.name (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Mon, Nov 23, 2015 at 4:02 PM, Josef Gajdusek <atx@atx.name> wrote: > This patch adds the binding documentation for the sun8i_ths driver > > Signed-off-by: Josef Gajdusek <atx@atx.name> > --- > .../devicetree/bindings/thermal/sun8i-ths.txt | 31 ++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > create mode 100644 Documentation/devicetree/bindings/thermal/sun8i-ths.txt > > diff --git a/Documentation/devicetree/bindings/thermal/sun8i-ths.txt b/Documentation/devicetree/bindings/thermal/sun8i-ths.txt > new file mode 100644 > index 0000000..67056bf > --- /dev/null > +++ b/Documentation/devicetree/bindings/thermal/sun8i-ths.txt > @@ -0,0 +1,31 @@ > +* sun8i THS > + > +Required properties: > +- compatible : "allwinner,sun8i-h3-ths" > +- reg : Address range of the thermal registers and location of the calibration > + value You are now using nvmem for the calibration data. You don't need the second entry. > +- resets : Must contain an entry for each entry in reset-names. > + see ../reset/reset.txt for details > +- reset-names : Must include the name "ahb" > +- clocks : Must contain an entry for each entry in clock-names. > +- clock-names : Must contain "ahb" for the bus gate and "ths" for the THS > + clock > + > +Optional properties: > +- nvmem-cells : Must contain an entry for each entry in nvmem-cell-names > +- nvmem-cell-names : Must contain "calibration" for the cell containing the > + temperature calibration cell, if available > + > +Example: > +ths: ths@01c25000 { > + #thermal-sensor-cells = <0>; > + compatible = "allwinner,sun8i-h3-ths"; > + reg = <0x01c25000 0x88>, <0x01c14234 0x4>; Same here. ChenYu > + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; > + resets = <&bus_rst 136>; > + reset-names = "ahb"; > + clocks = <&bus_gates 72>, <&ths_clk>; > + clock-names = "ahb", "ths"; > + nvmem-cells = <&ths_calibration>; > + nvmem-cell-names = "calibration"; > +}; > -- > 2.4.10 > -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Mon, Nov 23, 2015 at 09:02:51AM +0100, Josef Gajdusek wrote: > This patch adds the binding documentation for the sun8i_ths driver > > Signed-off-by: Josef Gajdusek <atx@atx.name> > --- > .../devicetree/bindings/thermal/sun8i-ths.txt | 31 ++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > create mode 100644 Documentation/devicetree/bindings/thermal/sun8i-ths.txt > > diff --git a/Documentation/devicetree/bindings/thermal/sun8i-ths.txt b/Documentation/devicetree/bindings/thermal/sun8i-ths.txt > new file mode 100644 > index 0000000..67056bf > --- /dev/null > +++ b/Documentation/devicetree/bindings/thermal/sun8i-ths.txt > @@ -0,0 +1,31 @@ > +* sun8i THS > + > +Required properties: > +- compatible : "allwinner,sun8i-h3-ths" > +- reg : Address range of the thermal registers and location of the calibration > + value > +- resets : Must contain an entry for each entry in reset-names. > + see ../reset/reset.txt for details > +- reset-names : Must include the name "ahb" If you have a single reset line, you don't need reset-names. Thanks! Maxime
diff --git a/Documentation/devicetree/bindings/thermal/sun8i-ths.txt b/Documentation/devicetree/bindings/thermal/sun8i-ths.txt new file mode 100644 index 0000000..67056bf --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/sun8i-ths.txt @@ -0,0 +1,31 @@ +* sun8i THS + +Required properties: +- compatible : "allwinner,sun8i-h3-ths" +- reg : Address range of the thermal registers and location of the calibration + value +- resets : Must contain an entry for each entry in reset-names. + see ../reset/reset.txt for details +- reset-names : Must include the name "ahb" +- clocks : Must contain an entry for each entry in clock-names. +- clock-names : Must contain "ahb" for the bus gate and "ths" for the THS + clock + +Optional properties: +- nvmem-cells : Must contain an entry for each entry in nvmem-cell-names +- nvmem-cell-names : Must contain "calibration" for the cell containing the + temperature calibration cell, if available + +Example: +ths: ths@01c25000 { + #thermal-sensor-cells = <0>; + compatible = "allwinner,sun8i-h3-ths"; + reg = <0x01c25000 0x88>, <0x01c14234 0x4>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + resets = <&bus_rst 136>; + reset-names = "ahb"; + clocks = <&bus_gates 72>, <&ths_clk>; + clock-names = "ahb", "ths"; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; +};
This patch adds the binding documentation for the sun8i_ths driver Signed-off-by: Josef Gajdusek <atx@atx.name> --- .../devicetree/bindings/thermal/sun8i-ths.txt | 31 ++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/sun8i-ths.txt