| Message ID | 2208889.a1Ck7xDyoJ@aspire.rjw.lan (mailing list archive) |
|---|---|
| State | Mainlined |
| Delegated to: | Rafael Wysocki |
| Headers | show |
On 28 October 2017 at 00:17, Rafael J. Wysocki <rjw@rjwysocki.net> wrote: > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > The motivation for this change is to provide a way to work around > a problem with the direct-complete mechanism used for avoiding > system suspend/resume handling for devices in runtime suspend. > > The problem is that some middle layer code (the PCI bus type and > the ACPI PM domain in particular) returns positive values from its > system suspend ->prepare callbacks regardless of whether the driver's > ->prepare returns a positive value or 0, which effectively prevents > drivers from being able to control the direct-complete feature. > Some drivers need that control, however, and the PCI bus type has > grown its own flag to deal with this issue, but since it is not > limited to PCI, it is better to address it by adding driver flags at > the core level. > > To that end, add a driver_flags field to struct dev_pm_info for flags > that can be set by device drivers at the probe time to inform the PM > core and/or bus types, PM domains and so on on the capabilities and/or > preferences of device drivers. Also add two static inline helpers > for setting that field and testing it against a given set of flags > and make the driver core clear it automatically on driver remove > and probe failures. > > Define and document two PM driver flags related to the direct- > complete feature: NEVER_SKIP and SMART_PREPARE that can be used, > respectively, to indicate to the PM core that the direct-complete > mechanism should never be used for the device and to inform the > middle layer code (bus types, PM domains etc) that it can only > request the PM core to use the direct-complete mechanism for > the device (by returning a positive value from its ->prepare > callback) if it also has been requested by the driver. > > While at it, make the core check pm_runtime_suspended() when > setting power.direct_complete so that it doesn't need to be > checked by ->prepare callbacks. > > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Acked-by: Bjorn Helgaas <bhelgaas@google.com> If not too late: Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> > --- > > -> v2: Do not use pm_generic_prepare() in acpi_subsys_prepare() > as the latter has to distinguish between the lack of the > driver's ->prepare callback and the situation in which that > callback has returned 0 if DPM_FLAG_SMART_PREPARE is set. > > --- > Documentation/driver-api/pm/devices.rst | 14 ++++++++++++++ > Documentation/power/pci.txt | 19 +++++++++++++++++++ > drivers/acpi/device_pm.c | 13 +++++++++---- > drivers/base/dd.c | 2 ++ > drivers/base/power/main.c | 4 +++- > drivers/pci/pci-driver.c | 5 ++++- > include/linux/device.h | 10 ++++++++++ > include/linux/pm.h | 20 ++++++++++++++++++++ > 8 files changed, 81 insertions(+), 6 deletions(-) > > Index: linux-pm/include/linux/device.h > =================================================================== > --- linux-pm.orig/include/linux/device.h > +++ linux-pm/include/linux/device.h > @@ -1070,6 +1070,16 @@ static inline void dev_pm_syscore_device > #endif > } > > +static inline void dev_pm_set_driver_flags(struct device *dev, u32 flags) > +{ > + dev->power.driver_flags = flags; > +} > + > +static inline bool dev_pm_test_driver_flags(struct device *dev, u32 flags) > +{ > + return !!(dev->power.driver_flags & flags); > +} > + > static inline void device_lock(struct device *dev) > { > mutex_lock(&dev->mutex); > Index: linux-pm/include/linux/pm.h > =================================================================== > --- linux-pm.orig/include/linux/pm.h > +++ linux-pm/include/linux/pm.h > @@ -550,6 +550,25 @@ struct pm_subsys_data { > #endif > }; > > +/* > + * Driver flags to control system suspend/resume behavior. > + * > + * These flags can be set by device drivers at the probe time. They need not be > + * cleared by the drivers as the driver core will take care of that. > + * > + * NEVER_SKIP: Do not skip system suspend/resume callbacks for the device. > + * SMART_PREPARE: Check the return value of the driver's ->prepare callback. > + * > + * Setting SMART_PREPARE instructs bus types and PM domains which may want > + * system suspend/resume callbacks to be skipped for the device to return 0 from > + * their ->prepare callbacks if the driver's ->prepare callback returns 0 (in > + * other words, the system suspend/resume callbacks can only be skipped for the > + * device if its driver doesn't object against that). This flag has no effect > + * if NEVER_SKIP is set. > + */ > +#define DPM_FLAG_NEVER_SKIP BIT(0) > +#define DPM_FLAG_SMART_PREPARE BIT(1) > + > struct dev_pm_info { > pm_message_t power_state; > unsigned int can_wakeup:1; > @@ -561,6 +580,7 @@ struct dev_pm_info { > bool is_late_suspended:1; > bool early_init:1; /* Owned by the PM core */ > bool direct_complete:1; /* Owned by the PM core */ > + u32 driver_flags; > spinlock_t lock; > #ifdef CONFIG_PM_SLEEP > struct list_head entry; > Index: linux-pm/drivers/base/dd.c > =================================================================== > --- linux-pm.orig/drivers/base/dd.c > +++ linux-pm/drivers/base/dd.c > @@ -464,6 +464,7 @@ pinctrl_bind_failed: > if (dev->pm_domain && dev->pm_domain->dismiss) > dev->pm_domain->dismiss(dev); > pm_runtime_reinit(dev); > + dev_pm_set_driver_flags(dev, 0); > > switch (ret) { > case -EPROBE_DEFER: > @@ -869,6 +870,7 @@ static void __device_release_driver(stru > if (dev->pm_domain && dev->pm_domain->dismiss) > dev->pm_domain->dismiss(dev); > pm_runtime_reinit(dev); > + dev_pm_set_driver_flags(dev, 0); > > klist_remove(&dev->p->knode_driver); > device_pm_check_callbacks(dev); > Index: linux-pm/drivers/base/power/main.c > =================================================================== > --- linux-pm.orig/drivers/base/power/main.c > +++ linux-pm/drivers/base/power/main.c > @@ -1700,7 +1700,9 @@ unlock: > * applies to suspend transitions, however. > */ > spin_lock_irq(&dev->power.lock); > - dev->power.direct_complete = ret > 0 && state.event == PM_EVENT_SUSPEND; > + dev->power.direct_complete = state.event == PM_EVENT_SUSPEND && > + pm_runtime_suspended(dev) && ret > 0 && > + !dev_pm_test_driver_flags(dev, DPM_FLAG_NEVER_SKIP); > spin_unlock_irq(&dev->power.lock); > return 0; > } > Index: linux-pm/drivers/pci/pci-driver.c > =================================================================== > --- linux-pm.orig/drivers/pci/pci-driver.c > +++ linux-pm/drivers/pci/pci-driver.c > @@ -682,8 +682,11 @@ static int pci_pm_prepare(struct device > > if (drv && drv->pm && drv->pm->prepare) { > int error = drv->pm->prepare(dev); > - if (error) > + if (error < 0) > return error; > + > + if (!error && dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_PREPARE)) > + return 0; > } > return pci_dev_keep_suspended(to_pci_dev(dev)); > } > Index: linux-pm/drivers/acpi/device_pm.c > =================================================================== > --- linux-pm.orig/drivers/acpi/device_pm.c > +++ linux-pm/drivers/acpi/device_pm.c > @@ -959,11 +959,16 @@ static bool acpi_dev_needs_resume(struct > int acpi_subsys_prepare(struct device *dev) > { > struct acpi_device *adev = ACPI_COMPANION(dev); > - int ret; > > - ret = pm_generic_prepare(dev); > - if (ret < 0) > - return ret; > + if (dev->driver && dev->driver->pm && dev->driver->pm->prepare) { > + int ret = dev->driver->pm->prepare(dev); > + > + if (ret < 0) > + return ret; > + > + if (!ret && dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_PREPARE)) > + return 0; > + } > > if (!adev || !pm_runtime_suspended(dev)) > return 0; > Index: linux-pm/Documentation/driver-api/pm/devices.rst > =================================================================== > --- linux-pm.orig/Documentation/driver-api/pm/devices.rst > +++ linux-pm/Documentation/driver-api/pm/devices.rst > @@ -354,6 +354,20 @@ the phases are: ``prepare``, ``suspend`` > is because all such devices are initially set to runtime-suspended with > runtime PM disabled. > > + This feature also can be controlled by device drivers by using the > + ``DPM_FLAG_NEVER_SKIP`` and ``DPM_FLAG_SMART_PREPARE`` driver power > + management flags. [Typically, they are set at the time the driver is > + probed against the device in question by passing them to the > + :c:func:`dev_pm_set_driver_flags` helper function.] If the first of > + these flags is set, the PM core will not apply the direct-complete > + procedure described above to the given device and, consequenty, to any > + of its ancestors. The second flag, when set, informs the middle layer > + code (bus types, device types, PM domains, classes) that it should take > + the return value of the ``->prepare`` callback provided by the driver > + into account and it may only return a positive value from its own > + ``->prepare`` callback if the driver's one also has returned a positive > + value. > + > 2. The ``->suspend`` methods should quiesce the device to stop it from > performing I/O. They also may save the device registers and put it into > the appropriate low-power state, depending on the bus type the device is > Index: linux-pm/Documentation/power/pci.txt > =================================================================== > --- linux-pm.orig/Documentation/power/pci.txt > +++ linux-pm/Documentation/power/pci.txt > @@ -961,6 +961,25 @@ dev_pm_ops to indicate that one suspend > .suspend(), .freeze(), and .poweroff() members and one resume routine is to > be pointed to by the .resume(), .thaw(), and .restore() members. > > +3.1.19. Driver Flags for Power Management > + > +The PM core allows device drivers to set flags that influence the handling of > +power management for the devices by the core itself and by middle layer code > +including the PCI bus type. The flags should be set once at the driver probe > +time with the help of the dev_pm_set_driver_flags() function and they should not > +be updated directly afterwards. > + > +The DPM_FLAG_NEVER_SKIP flag prevents the PM core from using the direct-complete > +mechanism allowing device suspend/resume callbacks to be skipped if the device > +is in runtime suspend when the system suspend starts. That also affects all of > +the ancestors of the device, so this flag should only be used if absolutely > +necessary. > + > +The DPM_FLAG_SMART_PREPARE flag instructs the PCI bus type to only return a > +positive value from pci_pm_prepare() if the ->prepare callback provided by the > +driver of the device returns a positive value. That allows the driver to opt > +out from using the direct-complete mechanism dynamically. > + > 3.2. Device Runtime Power Management > ------------------------------------ > In addition to providing device power management callbacks PCI device drivers >
Index: linux-pm/include/linux/device.h =================================================================== --- linux-pm.orig/include/linux/device.h +++ linux-pm/include/linux/device.h @@ -1070,6 +1070,16 @@ static inline void dev_pm_syscore_device #endif } +static inline void dev_pm_set_driver_flags(struct device *dev, u32 flags) +{ + dev->power.driver_flags = flags; +} + +static inline bool dev_pm_test_driver_flags(struct device *dev, u32 flags) +{ + return !!(dev->power.driver_flags & flags); +} + static inline void device_lock(struct device *dev) { mutex_lock(&dev->mutex); Index: linux-pm/include/linux/pm.h =================================================================== --- linux-pm.orig/include/linux/pm.h +++ linux-pm/include/linux/pm.h @@ -550,6 +550,25 @@ struct pm_subsys_data { #endif }; +/* + * Driver flags to control system suspend/resume behavior. + * + * These flags can be set by device drivers at the probe time. They need not be + * cleared by the drivers as the driver core will take care of that. + * + * NEVER_SKIP: Do not skip system suspend/resume callbacks for the device. + * SMART_PREPARE: Check the return value of the driver's ->prepare callback. + * + * Setting SMART_PREPARE instructs bus types and PM domains which may want + * system suspend/resume callbacks to be skipped for the device to return 0 from + * their ->prepare callbacks if the driver's ->prepare callback returns 0 (in + * other words, the system suspend/resume callbacks can only be skipped for the + * device if its driver doesn't object against that). This flag has no effect + * if NEVER_SKIP is set. + */ +#define DPM_FLAG_NEVER_SKIP BIT(0) +#define DPM_FLAG_SMART_PREPARE BIT(1) + struct dev_pm_info { pm_message_t power_state; unsigned int can_wakeup:1; @@ -561,6 +580,7 @@ struct dev_pm_info { bool is_late_suspended:1; bool early_init:1; /* Owned by the PM core */ bool direct_complete:1; /* Owned by the PM core */ + u32 driver_flags; spinlock_t lock; #ifdef CONFIG_PM_SLEEP struct list_head entry; Index: linux-pm/drivers/base/dd.c =================================================================== --- linux-pm.orig/drivers/base/dd.c +++ linux-pm/drivers/base/dd.c @@ -464,6 +464,7 @@ pinctrl_bind_failed: if (dev->pm_domain && dev->pm_domain->dismiss) dev->pm_domain->dismiss(dev); pm_runtime_reinit(dev); + dev_pm_set_driver_flags(dev, 0); switch (ret) { case -EPROBE_DEFER: @@ -869,6 +870,7 @@ static void __device_release_driver(stru if (dev->pm_domain && dev->pm_domain->dismiss) dev->pm_domain->dismiss(dev); pm_runtime_reinit(dev); + dev_pm_set_driver_flags(dev, 0); klist_remove(&dev->p->knode_driver); device_pm_check_callbacks(dev); Index: linux-pm/drivers/base/power/main.c =================================================================== --- linux-pm.orig/drivers/base/power/main.c +++ linux-pm/drivers/base/power/main.c @@ -1700,7 +1700,9 @@ unlock: * applies to suspend transitions, however. */ spin_lock_irq(&dev->power.lock); - dev->power.direct_complete = ret > 0 && state.event == PM_EVENT_SUSPEND; + dev->power.direct_complete = state.event == PM_EVENT_SUSPEND && + pm_runtime_suspended(dev) && ret > 0 && + !dev_pm_test_driver_flags(dev, DPM_FLAG_NEVER_SKIP); spin_unlock_irq(&dev->power.lock); return 0; } Index: linux-pm/drivers/pci/pci-driver.c =================================================================== --- linux-pm.orig/drivers/pci/pci-driver.c +++ linux-pm/drivers/pci/pci-driver.c @@ -682,8 +682,11 @@ static int pci_pm_prepare(struct device if (drv && drv->pm && drv->pm->prepare) { int error = drv->pm->prepare(dev); - if (error) + if (error < 0) return error; + + if (!error && dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_PREPARE)) + return 0; } return pci_dev_keep_suspended(to_pci_dev(dev)); } Index: linux-pm/drivers/acpi/device_pm.c =================================================================== --- linux-pm.orig/drivers/acpi/device_pm.c +++ linux-pm/drivers/acpi/device_pm.c @@ -959,11 +959,16 @@ static bool acpi_dev_needs_resume(struct int acpi_subsys_prepare(struct device *dev) { struct acpi_device *adev = ACPI_COMPANION(dev); - int ret; - ret = pm_generic_prepare(dev); - if (ret < 0) - return ret; + if (dev->driver && dev->driver->pm && dev->driver->pm->prepare) { + int ret = dev->driver->pm->prepare(dev); + + if (ret < 0) + return ret; + + if (!ret && dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_PREPARE)) + return 0; + } if (!adev || !pm_runtime_suspended(dev)) return 0; Index: linux-pm/Documentation/driver-api/pm/devices.rst =================================================================== --- linux-pm.orig/Documentation/driver-api/pm/devices.rst +++ linux-pm/Documentation/driver-api/pm/devices.rst @@ -354,6 +354,20 @@ the phases are: ``prepare``, ``suspend`` is because all such devices are initially set to runtime-suspended with runtime PM disabled. + This feature also can be controlled by device drivers by using the + ``DPM_FLAG_NEVER_SKIP`` and ``DPM_FLAG_SMART_PREPARE`` driver power + management flags. [Typically, they are set at the time the driver is + probed against the device in question by passing them to the + :c:func:`dev_pm_set_driver_flags` helper function.] If the first of + these flags is set, the PM core will not apply the direct-complete + procedure described above to the given device and, consequenty, to any + of its ancestors. The second flag, when set, informs the middle layer + code (bus types, device types, PM domains, classes) that it should take + the return value of the ``->prepare`` callback provided by the driver + into account and it may only return a positive value from its own + ``->prepare`` callback if the driver's one also has returned a positive + value. + 2. The ``->suspend`` methods should quiesce the device to stop it from performing I/O. They also may save the device registers and put it into the appropriate low-power state, depending on the bus type the device is Index: linux-pm/Documentation/power/pci.txt =================================================================== --- linux-pm.orig/Documentation/power/pci.txt +++ linux-pm/Documentation/power/pci.txt @@ -961,6 +961,25 @@ dev_pm_ops to indicate that one suspend .suspend(), .freeze(), and .poweroff() members and one resume routine is to be pointed to by the .resume(), .thaw(), and .restore() members. +3.1.19. Driver Flags for Power Management + +The PM core allows device drivers to set flags that influence the handling of +power management for the devices by the core itself and by middle layer code +including the PCI bus type. The flags should be set once at the driver probe +time with the help of the dev_pm_set_driver_flags() function and they should not +be updated directly afterwards. + +The DPM_FLAG_NEVER_SKIP flag prevents the PM core from using the direct-complete +mechanism allowing device suspend/resume callbacks to be skipped if the device +is in runtime suspend when the system suspend starts. That also affects all of +the ancestors of the device, so this flag should only be used if absolutely +necessary. + +The DPM_FLAG_SMART_PREPARE flag instructs the PCI bus type to only return a +positive value from pci_pm_prepare() if the ->prepare callback provided by the +driver of the device returns a positive value. That allows the driver to opt +out from using the direct-complete mechanism dynamically. + 3.2. Device Runtime Power Management ------------------------------------ In addition to providing device power management callbacks PCI device drivers