diff mbox series

[v1,06/10] cpufreq: qti: Enable cpufreq for ipq53xx

Message ID 558c6b70090ea7220bfb0b6e7d81828025018376.1693996662.git.quic_varada@quicinc.com (mailing list archive)
State New, archived
Delegated to: viresh kumar
Headers show
Series Enable cpufreq for IPQ5332 & IPQ9574 | expand

Commit Message

Varadarajan Narayanan Sept. 7, 2023, 5:21 a.m. UTC 
IPQ53xx have different OPPs available for the CPU based on
SoC variant. This can be determined through use of an eFuse
register present in the silicon.

Added support for ipq53xx on nvmem driver which helps to
determine OPPs at runtime based on the eFuse register which
has the CPU frequency limits. opp-supported-hw dt binding
can be used to indicate the available OPPs for each limit.

nvmem driver also creates the "cpufreq-dt" platform_device after
passing the version matching data to the OPP framework so that the
cpufreq-dt handles the actual cpufreq implementation.

Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
 drivers/cpufreq/cpufreq-dt-platdev.c |  1 +
 drivers/cpufreq/qcom-cpufreq-nvmem.c | 15 +++++++++++++++
 2 files changed, 16 insertions(+)

Comments

Konrad Dybcio Sept. 7, 2023, 8:34 a.m. UTC | #1 
On 7.09.2023 07:21, Varadarajan Narayanan wrote:
> IPQ53xx have different OPPs available for the CPU based on
> SoC variant. This can be determined through use of an eFuse
> register present in the silicon.
> 
> Added support for ipq53xx on nvmem driver which helps to
> determine OPPs at runtime based on the eFuse register which
> has the CPU frequency limits. opp-supported-hw dt binding
> can be used to indicate the available OPPs for each limit.
> 
> nvmem driver also creates the "cpufreq-dt" platform_device after
> passing the version matching data to the OPP framework so that the
> cpufreq-dt handles the actual cpufreq implementation.
> 
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> ---
>  drivers/cpufreq/cpufreq-dt-platdev.c |  1 +
>  drivers/cpufreq/qcom-cpufreq-nvmem.c | 15 +++++++++++++++
>  2 files changed, 16 insertions(+)
> 
> diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
> index 02ec58a..f0c45d4 100644
> --- a/drivers/cpufreq/cpufreq-dt-platdev.c
> +++ b/drivers/cpufreq/cpufreq-dt-platdev.c
Viresh probably picks up patches for both files, so it should
be fine, but I'd say it's 'eeeh' to edit 2 separate drivers at
once.

> @@ -178,6 +178,7 @@ static const struct of_device_id blocklist[] __initconst = {
>  	{ .compatible = "ti,am625", },
>  	{ .compatible = "ti,am62a7", },
>  
> +	{ .compatible = "qcom,ipq5332", },
>  	{ .compatible = "qcom,ipq8064", },
>  	{ .compatible = "qcom,apq8064", },
>  	{ .compatible = "qcom,msm8974", },
> diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c
> index 84d7033..49d21b0 100644
> --- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
> +++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
> @@ -146,6 +146,20 @@ static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
>  		return PTR_ERR(speedbin);
>  
>  	switch (msm_id) {
> +	case QCOM_ID_IPQ5332:
> +	case QCOM_ID_IPQ5322:
> +	case QCOM_ID_IPQ5312:
> +	case QCOM_ID_IPQ5302:
> +	case QCOM_ID_IPQ5300:
> +		/* Fuse Value    Freq    BIT to set
> +		 * ---------------------------------
> +		 *   2’b00     No Limit     BIT(0)
> +		 *   2’b01     1.5 GHz      BIT(1)
> +		 *   2’b10     1.2 Ghz      BIT(2)
> +		 *   2’b11     1.0 GHz      BIT(3)
I think the last column is a bit excessive, it says exactly
the same as the line below.

Actually, with this data being present in the devicetree, perhaps
this comment could be entirely skipped.

Konrad
> +		 */
> +		drv->versions = 1 << (unsigned int)(*speedbin);
> +		break;
>  	case QCOM_ID_MSM8996:
>  	case QCOM_ID_APQ8096:
>  		drv->versions = 1 << (unsigned int)(*speedbin);
> @@ -359,6 +373,7 @@ static const struct of_device_id qcom_cpufreq_match_list[] __initconst = {
>  	{ .compatible = "qcom,apq8096", .data = &match_data_kryo },
>  	{ .compatible = "qcom,msm8996", .data = &match_data_kryo },
>  	{ .compatible = "qcom,qcs404", .data = &match_data_qcs404 },
> +	{ .compatible = "qcom,ipq5332", .data = &match_data_kryo },
>  	{ .compatible = "qcom,ipq8064", .data = &match_data_krait },
>  	{ .compatible = "qcom,apq8064", .data = &match_data_krait },
>  	{ .compatible = "qcom,msm8974", .data = &match_data_krait },
Dmitry Baryshkov Sept. 7, 2023, 1:57 p.m. UTC | #2 
On Thu, 7 Sept 2023 at 08:23, Varadarajan Narayanan
<quic_varada@quicinc.com> wrote:
>
> IPQ53xx have different OPPs available for the CPU based on
> SoC variant. This can be determined through use of an eFuse
> register present in the silicon.
>
> Added support for ipq53xx on nvmem driver which helps to
> determine OPPs at runtime based on the eFuse register which
> has the CPU frequency limits. opp-supported-hw dt binding
> can be used to indicate the available OPPs for each limit.
>
> nvmem driver also creates the "cpufreq-dt" platform_device after
> passing the version matching data to the OPP framework so that the
> cpufreq-dt handles the actual cpufreq implementation.
>
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> ---
>  drivers/cpufreq/cpufreq-dt-platdev.c |  1 +
>  drivers/cpufreq/qcom-cpufreq-nvmem.c | 15 +++++++++++++++
>  2 files changed, 16 insertions(+)
>
> diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
> index 02ec58a..f0c45d4 100644
> --- a/drivers/cpufreq/cpufreq-dt-platdev.c
> +++ b/drivers/cpufreq/cpufreq-dt-platdev.c
> @@ -178,6 +178,7 @@ static const struct of_device_id blocklist[] __initconst = {
>         { .compatible = "ti,am625", },
>         { .compatible = "ti,am62a7", },
>
> +       { .compatible = "qcom,ipq5332", },
>         { .compatible = "qcom,ipq8064", },
>         { .compatible = "qcom,apq8064", },
>         { .compatible = "qcom,msm8974", },
> diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c
> index 84d7033..49d21b0 100644
> --- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
> +++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
> @@ -146,6 +146,20 @@ static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
>                 return PTR_ERR(speedbin);
>
>         switch (msm_id) {
> +       case QCOM_ID_IPQ5332:
> +       case QCOM_ID_IPQ5322:
> +       case QCOM_ID_IPQ5312:
> +       case QCOM_ID_IPQ5302:
> +       case QCOM_ID_IPQ5300:

msm8996 was bad enough. Can we use compat strings instead? Or make
this a default for qcom_cpufreq_kryo_name_version()?

> +               /* Fuse Value    Freq    BIT to set
> +                * ---------------------------------
> +                *   2’b00     No Limit     BIT(0)
> +                *   2’b01     1.5 GHz      BIT(1)
> +                *   2’b10     1.2 Ghz      BIT(2)
> +                *   2’b11     1.0 GHz      BIT(3)
> +                */
> +               drv->versions = 1 << (unsigned int)(*speedbin);
> +               break;
>         case QCOM_ID_MSM8996:
>         case QCOM_ID_APQ8096:
>                 drv->versions = 1 << (unsigned int)(*speedbin);
> @@ -359,6 +373,7 @@ static const struct of_device_id qcom_cpufreq_match_list[] __initconst = {
>         { .compatible = "qcom,apq8096", .data = &match_data_kryo },
>         { .compatible = "qcom,msm8996", .data = &match_data_kryo },
>         { .compatible = "qcom,qcs404", .data = &match_data_qcs404 },
> +       { .compatible = "qcom,ipq5332", .data = &match_data_kryo },
>         { .compatible = "qcom,ipq8064", .data = &match_data_krait },
>         { .compatible = "qcom,apq8064", .data = &match_data_krait },
>         { .compatible = "qcom,msm8974", .data = &match_data_krait },
> --
> 2.7.4
>
Bryan O'Donoghue Sept. 7, 2023, 3:46 p.m. UTC | #3 
On 07/09/2023 06:21, Varadarajan Narayanan wrote:
> IPQ53xx have different OPPs available for the CPU based on
> SoC variant. This can be determined through use of an eFuse
> register present in the silicon.
> 
> Added support for ipq53xx on nvmem driver which helps to
> determine OPPs at runtime based on the eFuse register which
> has the CPU frequency limits. opp-supported-hw dt binding
> can be used to indicate the available OPPs for each limit.
> 
> nvmem driver also creates the "cpufreq-dt" platform_device after
> passing the version matching data to the OPP framework so that the
> cpufreq-dt handles the actual cpufreq implementation.
> 
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> ---
>   drivers/cpufreq/cpufreq-dt-platdev.c |  1 +
>   drivers/cpufreq/qcom-cpufreq-nvmem.c | 15 +++++++++++++++
>   2 files changed, 16 insertions(+)
> 
> diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
> index 02ec58a..f0c45d4 100644
> --- a/drivers/cpufreq/cpufreq-dt-platdev.c
> +++ b/drivers/cpufreq/cpufreq-dt-platdev.c
> @@ -178,6 +178,7 @@ static const struct of_device_id blocklist[] __initconst = {
>   	{ .compatible = "ti,am625", },
>   	{ .compatible = "ti,am62a7", },
>   
> +	{ .compatible = "qcom,ipq5332", },
>   	{ .compatible = "qcom,ipq8064", },
>   	{ .compatible = "qcom,apq8064", },
>   	{ .compatible = "qcom,msm8974", },
> diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c
> index 84d7033..49d21b0 100644
> --- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
> +++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
> @@ -146,6 +146,20 @@ static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
>   		return PTR_ERR(speedbin);
>   
>   	switch (msm_id) {
> +	case QCOM_ID_IPQ5332:
> +	case QCOM_ID_IPQ5322:
> +	case QCOM_ID_IPQ5312:
> +	case QCOM_ID_IPQ5302:
> +	case QCOM_ID_IPQ5300:
> +		/* Fuse Value    Freq    BIT to set
> +		 * ---------------------------------
> +		 *   2’b00     No Limit     BIT(0)
> +		 *   2’b01     1.5 GHz      BIT(1)
> +		 *   2’b10     1.2 Ghz      BIT(2)
> +		 *   2’b11     1.0 GHz      BIT(3)
> +		 */
> +		drv->versions = 1 << (unsigned int)(*speedbin);
> +		break;

I like that you've included a comment however, the switch is an ordered 
list and these values should come after QCOM_ID_APQ8096SG

#define QCOM_ID_MSM8996                 246
#define QCOM_ID_APQ8096                 291
#define QCOM_ID_MSM8996SG               305
#define QCOM_ID_APQ8096SG               312
#define QCOM_ID_IPQ5332                 592
...
#define QCOM_ID_IPQ5300                 624

>   	case QCOM_ID_MSM8996:
>   	case QCOM_ID_APQ8096:
>   		drv->versions = 1 << (unsigned int)(*speedbin);


> @@ -359,6 +373,7 @@ static const struct of_device_id qcom_cpufreq_match_list[] __initconst = {
>   	{ .compatible = "qcom,apq8096", .data = &match_data_kryo },
>   	{ .compatible = "qcom,msm8996", .data = &match_data_kryo },
>   	{ .compatible = "qcom,qcs404", .data = &match_data_qcs404 },
> +	{ .compatible = "qcom,ipq5332", .data = &match_data_kryo },
>   	{ .compatible = "qcom,ipq8064", .data = &match_data_krait },
>   	{ .compatible = "qcom,apq8064", .data = &match_data_krait },
>   	{ .compatible = "qcom,msm8974", .data = &match_data_krait },

Other than that.

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

---
bod
diff mbox series

Patch

diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index 02ec58a..f0c45d4 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -178,6 +178,7 @@  static const struct of_device_id blocklist[] __initconst = {
 	{ .compatible = "ti,am625", },
 	{ .compatible = "ti,am62a7", },
 
+	{ .compatible = "qcom,ipq5332", },
 	{ .compatible = "qcom,ipq8064", },
 	{ .compatible = "qcom,apq8064", },
 	{ .compatible = "qcom,msm8974", },
diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c
index 84d7033..49d21b0 100644
--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
@@ -146,6 +146,20 @@  static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
 		return PTR_ERR(speedbin);
 
 	switch (msm_id) {
+	case QCOM_ID_IPQ5332:
+	case QCOM_ID_IPQ5322:
+	case QCOM_ID_IPQ5312:
+	case QCOM_ID_IPQ5302:
+	case QCOM_ID_IPQ5300:
+		/* Fuse Value    Freq    BIT to set
+		 * ---------------------------------
+		 *   2’b00     No Limit     BIT(0)
+		 *   2’b01     1.5 GHz      BIT(1)
+		 *   2’b10     1.2 Ghz      BIT(2)
+		 *   2’b11     1.0 GHz      BIT(3)
+		 */
+		drv->versions = 1 << (unsigned int)(*speedbin);
+		break;
 	case QCOM_ID_MSM8996:
 	case QCOM_ID_APQ8096:
 		drv->versions = 1 << (unsigned int)(*speedbin);
@@ -359,6 +373,7 @@  static const struct of_device_id qcom_cpufreq_match_list[] __initconst = {
 	{ .compatible = "qcom,apq8096", .data = &match_data_kryo },
 	{ .compatible = "qcom,msm8996", .data = &match_data_kryo },
 	{ .compatible = "qcom,qcs404", .data = &match_data_qcs404 },
+	{ .compatible = "qcom,ipq5332", .data = &match_data_kryo },
 	{ .compatible = "qcom,ipq8064", .data = &match_data_krait },
 	{ .compatible = "qcom,apq8064", .data = &match_data_krait },
 	{ .compatible = "qcom,msm8974", .data = &match_data_krait },