diff --git a/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp b/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp
index 00fa04c76ff3..f5724bb5b462 100644
--- a/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp
+++ b/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp
@@ -12,13 +12,15 @@ Description:
 		resets. Three registers are used by the FSBL and
 		other Xilinx software products: GLOBAL_GEN_STORAGE{4:6}.
 
-		Usage:
-		# cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
-		# echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+		Usage::
 
-		Example:
-		# cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
-		# echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+		    # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+		    # echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+
+		Example::
+
+		    # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+		    # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
 
 Users:		Xilinx
 
@@ -39,13 +41,15 @@ Description:
 		software products: PERS_GLOB_GEN_STORAGE{4:7}.
 		Register is reset only by a POR reset.
 
-		Usage:
-		# cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
-		# echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+		Usage::
 
-		Example:
-		# cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
-		# echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+		    # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+		    # echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+
+		Example::
+
+		    # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+		    # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
 
 Users:		Xilinx
 
@@ -61,23 +65,28 @@ Description:
 
 		Following are available shutdown scopes(subtypes):
 
-		subsystem:	Only the APU along with all of its peripherals
+		subsystem:
+				Only the APU along with all of its peripherals
 				not used by other processing units will be
 				shut down. This may result in the FPD power
 				domain being shut down provided that no other
 				processing unit uses FPD peripherals or DRAM.
-		ps_only:	The complete PS will be shut down, including the
+		ps_only:
+				The complete PS will be shut down, including the
 				RPU, PMU, etc.  Only the PL domain (FPGA)
 				remains untouched.
-		system:		The complete system/device is shut down.
+		system:
+				The complete system/device is shut down.
 
-		Usage:
-		# cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
-		# echo <scope> > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+		Usage::
 
-		Example:
-		# cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
-		# echo "subsystem" > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+		    # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+		    # echo <scope> > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+
+		Example::
+
+		    # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+		    # echo "subsystem" > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
 
 Users:		Xilinx
 
@@ -94,10 +103,13 @@ Description:
 		system restart.
 
 		Usage:
-		Set healthy bit
-		# echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
 
-		Unset healthy bit
-		# echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
+		Set healthy bit::
+
+		    # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
+
+		Unset healthy bit::
+
+		    # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
 
 Users:		Xilinx
diff --git a/Documentation/ABI/testing/debugfs-moxtet b/Documentation/ABI/testing/debugfs-moxtet
index 67b1717794d8..15dfaecb2892 100644
--- a/Documentation/ABI/testing/debugfs-moxtet
+++ b/Documentation/ABI/testing/debugfs-moxtet
@@ -5,10 +5,16 @@ Contact:	Marek Behún <marek.behun@nic.cz>
 Description:	(R) Read input from the shift registers, in hexadecimal.
 		Returns N+1 bytes, where N is the number of Moxtet connected
 		modules. The first byte is from the CPU board itself.
-		Example: 101214
-			 10: CPU board with SD card
-			 12: 2 = PCIe module, 1 = IRQ not active
-			 14: 4 = Peridot module, 1 = IRQ not active
+
+		Example::
+
+			101214
+
+		==  =======================================
+		10  CPU board with SD card
+		12  2 = PCIe module, 1 = IRQ not active
+		14  4 = Peridot module, 1 = IRQ not active
+		==  =======================================
 
 What:		/sys/kernel/debug/moxtet/output
 Date:		March 2019
@@ -17,7 +23,13 @@ Contact:	Marek Behún <marek.behun@nic.cz>
 Description:	(RW) Read last written value to the shift registers, in
 		hexadecimal, or write values to the shift registers, also
 		in hexadecimal.
-		Example: 0102
-			 01: 01 was last written, or is to be written, to the
-			     first module's shift register
-			 02: the same for second module
+
+		Example::
+
+		    0102
+
+		==  ================================================
+		01  01 was last written, or is to be written, to the
+		    first module's shift register
+		02  the same for second module
+		==  ================================================
diff --git a/Documentation/ABI/testing/debugfs-turris-mox-rwtm b/Documentation/ABI/testing/debugfs-turris-mox-rwtm
index 2b3255ee68fd..c8f7dadd591c 100644
--- a/Documentation/ABI/testing/debugfs-turris-mox-rwtm
+++ b/Documentation/ABI/testing/debugfs-turris-mox-rwtm
@@ -2,8 +2,10 @@ What:		/sys/kernel/debug/turris-mox-rwtm/do_sign
 Date:		Jun 2020
 KernelVersion:	5.8
 Contact:	Marek Behún <marek.behun@nic.cz>
-Description:	(W) Message to sign with the ECDSA private key stored in
+Description:	(W)
+		    Message to sign with the ECDSA private key stored in
 		    device's OTP. The message must be exactly 64 bytes (since
 		    this is intended for SHA-512 hashes).
-		(R) The resulting signature, 136 bytes. This contains the R and
+		(R)
+		    The resulting signature, 136 bytes. This contains the R and
 		    S values of the ECDSA signature, both in big-endian format.
diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-dfl_fme b/Documentation/ABI/testing/sysfs-bus-event_source-devices-dfl_fme
index c9278a3b3df1..63a32ddcb95e 100644
--- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-dfl_fme
+++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-dfl_fme
@@ -8,13 +8,13 @@ Description:	Read-only. Attribute group to describe the magic bits
 
 		Each attribute under this group defines a bit range of the
 		perf_event_attr.config. All supported attributes are listed
-		below.
+		below::
 
 		    event  = "config:0-11"  - event ID
 		    evtype = "config:12-15" - event type
 		    portid = "config:16-23" - event source
 
-		For example,
+		For example::
 
 		    fab_mmio_read = "event=0x06,evtype=0x02,portid=0xff"
 
@@ -40,11 +40,11 @@ Description:	Read-only. Attribute group to describe performance monitoring
 
 		All supported performance monitoring events are listed below.
 
-		Basic events (evtype=0x00)
+		Basic events (evtype=0x00)::
 
 		    clock = "event=0x00,evtype=0x00,portid=0xff"
 
-		Cache events (evtype=0x01)
+		Cache events (evtype=0x01)::
 
 		    cache_read_hit      = "event=0x00,evtype=0x01,portid=0xff"
 		    cache_read_miss     = "event=0x01,evtype=0x01,portid=0xff"
@@ -59,7 +59,7 @@ Description:	Read-only. Attribute group to describe performance monitoring
 		    cache_rx_req_stall  = "event=0x09,evtype=0x01,portid=0xff"
 		    cache_eviction      = "event=0x0a,evtype=0x01,portid=0xff"
 
-		Fabric events (evtype=0x02)
+		Fabric events (evtype=0x02)::
 
 		    fab_pcie0_read       = "event=0x00,evtype=0x02,portid=0xff"
 		    fab_pcie0_write      = "event=0x01,evtype=0x02,portid=0xff"
@@ -78,7 +78,7 @@ Description:	Read-only. Attribute group to describe performance monitoring
 		    fab_port_mmio_read   = "event=0x06,evtype=0x02,portid=?"
 		    fab_port_mmio_write  = "event=0x07,evtype=0x02,portid=?"
 
-		VTD events (evtype=0x03)
+		VTD events (evtype=0x03)::
 
 		    vtd_port_read_transaction  = "event=0x00,evtype=0x03,portid=?"
 		    vtd_port_write_transaction = "event=0x01,evtype=0x03,portid=?"
@@ -88,7 +88,7 @@ Description:	Read-only. Attribute group to describe performance monitoring
 		    vtd_port_devtlb_2m_fill    = "event=0x05,evtype=0x03,portid=?"
 		    vtd_port_devtlb_1g_fill    = "event=0x06,evtype=0x03,portid=?"
 
-		VTD SIP events (evtype=0x04)
+		VTD SIP events (evtype=0x04)::
 
 		    vtd_sip_iotlb_4k_hit  = "event=0x00,evtype=0x04,portid=0xff"
 		    vtd_sip_iotlb_2m_hit  = "event=0x01,evtype=0x04,portid=0xff"
diff --git a/Documentation/ABI/testing/sysfs-bus-most b/Documentation/ABI/testing/sysfs-bus-most
index ec0a603d804b..38cc03e408e7 100644
--- a/Documentation/ABI/testing/sysfs-bus-most
+++ b/Documentation/ABI/testing/sysfs-bus-most
@@ -235,7 +235,8 @@ KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
 		This is to read back the configured direction of the channel.
-		The following strings will be accepted:
+		The following strings will be accepted::
+
 			'tx',
 			'rx'
 Users:
@@ -246,7 +247,8 @@ KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
 		This is to read back the configured data type of the channel.
-		The following strings will be accepted:
+		The following strings will be accepted::
+
 			'control',
 			'async',
 			'sync',
diff --git a/Documentation/ABI/testing/sysfs-class-devfreq b/Documentation/ABI/testing/sysfs-class-devfreq
index 67af3f31e17c..386bc230a33d 100644
--- a/Documentation/ABI/testing/sysfs-class-devfreq
+++ b/Documentation/ABI/testing/sysfs-class-devfreq
@@ -48,7 +48,8 @@ Description:
 		driver should provide the list of available frequencies
 		with its profile. If need to reset the statistics of devfreq
 		behavior on a specific device, enter 0(zero) to 'trans_stat'
-		as following:
+		as following::
+
 			echo 0 > /sys/class/devfreq/.../trans_stat
 
 What:		/sys/class/devfreq/.../available_frequencies
@@ -124,7 +125,8 @@ Description:
 		This work timer is used by devfreq workqueue in order to
 		monitor the device status such as utilization. The user
 		can change the work timer on runtime according to their demand
-		as following:
+		as following::
+
 			echo deferrable > /sys/class/devfreq/.../timer
 			echo delayed > /sys/class/devfreq/.../timer
 
diff --git a/Documentation/ABI/testing/sysfs-class-ocxl b/Documentation/ABI/testing/sysfs-class-ocxl
index bf33f4fda58f..847a7edc3113 100644
--- a/Documentation/ABI/testing/sysfs-class-ocxl
+++ b/Documentation/ABI/testing/sysfs-class-ocxl
@@ -13,8 +13,8 @@ Description:	read only
 		where:
 
 			====	===============================================
-			n:	number of currently active contexts, for debug
-			max:	maximum number of contexts supported by the AFU
+			n	number of currently active contexts, for debug
+			max	maximum number of contexts supported by the AFU
 			====	===============================================
 
 What:		/sys/class/ocxl/<afu name>/pp_mmio_size
@@ -43,7 +43,9 @@ Contact:	linuxppc-dev@lists.ozlabs.org
 Description:	read/write
 		Control whether the FPGA is reloaded on a link reset. Enabled
 		through a vendor-specific logic block on the FPGA.
-			0	Do not reload FPGA image from flash
-			1	Reload FPGA image from flash
-			unavailable
-				The device does not support this capability
+
+			===========  ===========================================
+			0	     Do not reload FPGA image from flash
+			1	     Reload FPGA image from flash
+			unavailable  The device does not support this capability
+			===========  ===========================================
diff --git a/Documentation/ABI/testing/sysfs-class-power-wilco b/Documentation/ABI/testing/sysfs-class-power-wilco
index 84fde1d0ada0..82af180fcaab 100644
--- a/Documentation/ABI/testing/sysfs-class-power-wilco
+++ b/Documentation/ABI/testing/sysfs-class-power-wilco
@@ -4,17 +4,23 @@ KernelVersion:	5.2
 Description:
 		What charging algorithm to use:
 
-		Standard: Fully charges battery at a standard rate.
-		Adaptive: Battery settings adaptively optimized based on
+		Standard:
+			Fully charges battery at a standard rate.
+		Adaptive:
+			Battery settings adaptively optimized based on
 			typical battery usage pattern.
-		Fast: Battery charges over a shorter period.
-		Trickle: Extends battery lifespan, intended for users who
+		Fast:
+			Battery charges over a shorter period.
+		Trickle:
+			Extends battery lifespan, intended for users who
 			primarily use their Chromebook while connected to AC.
-		Custom: A low and high threshold percentage is specified.
+		Custom:
+			A low and high threshold percentage is specified.
 			Charging begins when level drops below
 			charge_control_start_threshold, and ceases when
 			level is above charge_control_end_threshold.
-		Long Life: Customized charge rate for last longer battery life.
+		Long Life:
+			Customized charge rate for last longer battery life.
 			On Wilco device this mode is pre-configured in the factory
 			through EC's private PID. Swiching to a different mode will
 			be denied by Wilco EC when Long Life mode is enabled.
diff --git a/Documentation/ABI/testing/sysfs-class-rnbd-client b/Documentation/ABI/testing/sysfs-class-rnbd-client
index c084f203b41e..00c0286733d4 100644
--- a/Documentation/ABI/testing/sysfs-class-rnbd-client
+++ b/Documentation/ABI/testing/sysfs-class-rnbd-client
@@ -5,62 +5,70 @@ Contact:	Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud
 Description:	Provide information about RNBD-client.
 		All sysfs files that are not read-only provide the usage information on read:
 
-		Example:
-		# cat /sys/class/rnbd-client/ctl/map_device
+		Example::
 
-		> Usage: echo "sessname=<name of the rtrs session> path=<[srcaddr,]dstaddr>
-		> [path=<[srcaddr,]dstaddr>] device_path=<full path on remote side>
-		> [access_mode=<ro|rw|migration>] > map_device
-		>
-		> addr ::= [ ip:<ipv4> | ip:<ipv6> | gid:<gid> ]
+		    # cat /sys/class/rnbd-client/ctl/map_device
+
+		    > Usage: echo "sessname=<name of the rtrs session> path=<[srcaddr,]dstaddr>
+		    > [path=<[srcaddr,]dstaddr>] device_path=<full path on remote side>
+		    > [access_mode=<ro|rw|migration>] > map_device
+		    >
+		    > addr ::= [ ip:<ipv4> | ip:<ipv6> | gid:<gid> ]
 
 What:		/sys/class/rnbd-client/ctl/map_device
 Date:		Feb 2020
 KernelVersion:	5.7
 Contact:	Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com>
-Description:	Expected format is the following:
+Description:	Expected format is the following::
 
-		sessname=<name of the rtrs session>
-		path=<[srcaddr,]dstaddr> [path=<[srcaddr,]dstaddr> ...]
-		device_path=<full path on remote side>
-		[access_mode=<ro|rw|migration>]
+		    sessname=<name of the rtrs session>
+		    path=<[srcaddr,]dstaddr> [path=<[srcaddr,]dstaddr> ...]
+		    device_path=<full path on remote side>
+		    [access_mode=<ro|rw|migration>]
 
 		Where:
 
-		sessname: accepts a string not bigger than 256 chars, which identifies
-		a given session on the client and on the server.
-		I.e. "clt_hostname-srv_hostname" could be a natural choice.
+		sessname:
+		    accepts a string not bigger than 256 chars, which identifies
+		    a given session on the client and on the server.
+		    I.e. "clt_hostname-srv_hostname" could be a natural choice.
 
-		path:     describes a connection between the client and the server by
-		specifying destination and, when required, the source address.
-		The addresses are to be provided in the following format:
+		path:
+		    describes a connection between the client and the server by
+		    specifying destination and, when required, the source address.
+		    The addresses are to be provided in the following format::
 
-		ip:<IPv6>
-		ip:<IPv4>
-		gid:<GID>
+			ip:<IPv6>
+			ip:<IPv4>
+			gid:<GID>
 
-		for example:
+		for example::
+
+		    path=ip:10.0.0.66
 
-		path=ip:10.0.0.66
 		The single addr is treated as the destination.
 		The connection will be established to this server from any client IP address.
 
-		path=ip:10.0.0.66,ip:10.0.1.66
+		::
+
+		    path=ip:10.0.0.66,ip:10.0.1.66
+
 		First addr is the source address and the second is the destination.
 
 		If multiple "path=" options are specified multiple connection
 		will be established and data will be sent according to
 		the selected multipath policy (see RTRS mp_policy sysfs entry description).
 
-		device_path: Path to the block device on the server side. Path is specified
-		relative to the directory on server side configured in the
-		'dev_search_path' module parameter of the rnbd_server.
-		The rnbd_server prepends the <device_path> received from client
-		with <dev_search_path> and tries to open the
-		<dev_search_path>/<device_path> block device.  On success,
-		a /dev/rnbd<N> device file, a /sys/block/rnbd_client/rnbd<N>/
-		directory and an entry in /sys/class/rnbd-client/ctl/devices
-		will be created.
+		device_path:
+		    Path to the block device on the server side. Path is specified
+		    relative to the directory on server side configured in the
+		    'dev_search_path' module parameter of the rnbd_server.
+		    The rnbd_server prepends the <device_path> received from client
+		    with <dev_search_path> and tries to open the
+		    <dev_search_path>/<device_path> block device.  On success,
+		    a /dev/rnbd<N> device file, a /sys/block/rnbd_client/rnbd<N>/
+		    directory and an entry in /sys/class/rnbd-client/ctl/devices
+		    will be created.
 
 		If 'dev_search_path' contains '%SESSNAME%', then each session can
 		have different devices namespace, e.g. server was configured with
@@ -68,11 +76,12 @@ Description:	Expected format is the following:
 		client has this string "sessname=blya device_path=sda", then server
 		will try to open: /run/rnbd-devs/blya/sda.
 
-		access_mode: the access_mode parameter specifies if the device is to be
-		mapped as "ro" read-only or "rw" read-write. The server allows
-		a device to be exported in rw mode only once. The "migration"
-		access mode has to be specified if a second mapping in read-write
-		mode is desired.
+		access_mode:
+		    the access_mode parameter specifies if the device is to be
+		    mapped as "ro" read-only or "rw" read-write. The server allows
+		    a device to be exported in rw mode only once. The "migration"
+		    access mode has to be specified if a second mapping in read-write
+		    mode is desired.
 
 		By default "rw" is used.
 
@@ -91,7 +100,7 @@ Description:	Expected format is the following:
 		is the same as the device name.  By extracting the last part of the
 		path the path to the device /dev/<dev-name> can be build.
 
-		o /dev/block/$(cat /sys/class/rnbd-client/ctl/devices/<device_id>/dev)
+		* /dev/block/$(cat /sys/class/rnbd-client/ctl/devices/<device_id>/dev)
 
 		How to find the <device_id> of the device is described on the next
 		section.
@@ -106,6 +115,6 @@ Description:	For each device mapped on the client a new symbolic link is created
 		The <device_id> of each device is created as follows:
 
 		- If the 'device_path' provided during mapping contains slashes ("/"),
-		they are replaced by exclamation mark ("!") and used as as the
-		<device_id>. Otherwise, the <device_id> will be the same as the
-		"device_path" provided.
+		  they are replaced by exclamation mark ("!") and used as as the
+		  <device_id>. Otherwise, the <device_id> will be the same as the
+		  "device_path" provided.
diff --git a/Documentation/ABI/testing/sysfs-class-rtrs-client b/Documentation/ABI/testing/sysfs-class-rtrs-client
index e7e718db8941..0f7165aab251 100644
--- a/Documentation/ABI/testing/sysfs-class-rtrs-client
+++ b/Documentation/ABI/testing/sysfs-class-rtrs-client
@@ -10,10 +10,10 @@ Date:		Feb 2020
 KernelVersion:	5.7
 Contact:	Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com>
 Description:	RW, adds a new path (connection) to an existing session. Expected format is the
-		following:
+		following::
 
-		<[source addr,]destination addr>
-		*addr ::= [ ip:<ipv4|ipv6> | gid:<gid> ]
+		    <[source addr,]destination addr>
+		    *addr ::= [ ip:<ipv4|ipv6> | gid:<gid> ]
 
 What:		/sys/class/rtrs-client/<session-name>/max_reconnect_attempts
 Date:		Feb 2020
@@ -29,10 +29,10 @@ Contact:	Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud
 Description:	Multipath policy specifies which path should be selected on each IO:
 
 		round-robin (0):
-		select path in per CPU round-robin manner.
+		    select path in per CPU round-robin manner.
 
 		min-inflight (1):
-		select path with minimum inflights.
+		    select path with minimum inflights.
 
 What:		/sys/class/rtrs-client/<session-name>/paths/
 Date:		Feb 2020
@@ -109,8 +109,11 @@ Description:	RTRS expects that each HCA IRQ is pinned to a separate CPU. If it's
 		not the case, the processing of an I/O response could be processed on a
 		different CPU than where it was originally submitted.  This file shows
 		how many interrupts where generated on a non expected CPU.
-		"from:" is the CPU on which the IRQ was expected, but not generated.
-		"to:" is the CPU on which the IRQ was generated, but not expected.
+
+		"from:"
+		    is the CPU on which the IRQ was expected, but not generated.
+		"to:"
+		    is the CPU on which the IRQ was generated, but not expected.
 
 What:		/sys/class/rtrs-client/<session-name>/paths/<src@dst>/stats/reconnects
 Date:		Feb 2020
@@ -125,7 +128,7 @@ Date:		Feb 2020
 KernelVersion:	5.7
 Contact:	Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com>
 Description:	Contains statistics regarding rdma operations and inflight operations.
-		The output consists of 6 values:
+		The output consists of 6 values::
 
-		<read-count> <read-total-size> <write-count> <write-total-size> \
-		<inflights> <failovered>
+		    <read-count> <read-total-size> <write-count> \
+		    <write-total-size> <inflights> <failovered>
diff --git a/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu b/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu
index a8daceb4a956..ee253b033280 100644
--- a/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu
+++ b/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu
@@ -102,6 +102,8 @@ Description:
 		b[15:0]
 			inform firmware the current software execution
 			stage.
+
+			==	===========================================
 			0	the first stage bootloader didn't run or
 				didn't reach the point of launching second
 				stage bootloader.
@@ -111,21 +113,29 @@ Description:
 			2	both first and second stage bootloader ran
 				and the operating system launch was
 				attempted.
+			==	===========================================
 
 		b[16]
+			==	===========================================
 			1	firmware to reset current image retry
 				counter.
 			0	no action.
+			==	===========================================
 
 		b[17]
+			==	===========================================
 			1	firmware to clear RSU log
 			0	no action.
+			==	===========================================
 
 		b[18]
 			this is negative logic
+
+			==	===========================================
 			1	no action
 			0	firmware record the notify code defined
 				in b[15:0].
+			==	===========================================
 
 What:		/sys/devices/platform/stratix10-rsu.0/dcmf0
 Date:		June 2020
diff --git a/Documentation/ABI/testing/sysfs-driver-w1_therm b/Documentation/ABI/testing/sysfs-driver-w1_therm
index 8873bbb075cb..6a37dc33ffdb 100644
--- a/Documentation/ABI/testing/sysfs-driver-w1_therm
+++ b/Documentation/ABI/testing/sysfs-driver-w1_therm
@@ -22,8 +22,10 @@ Description:
 		device data to its embedded EEPROM, either restore data
 		embedded in device EEPROM. Be aware that devices support
 		limited EEPROM writing cycles (typical 50k)
+
 			* 'save': save device RAM to EEPROM
 			* 'restore': restore EEPROM data in device RAM
+
 Users:		any user space application which wants to communicate with
 		w1_term device
 
@@ -33,9 +35,11 @@ Date:		May 2020
 Contact:	Akira Shimahara <akira215corp@gmail.com>
 Description:
 		(RO) return the power status by asking the device
+
 			* '0': device parasite powered
 			* '1': device externally powered
 			* '-xx': xx is kernel error when reading power status
+
 Users:		any user space application which wants to communicate with
 		w1_term device
 
@@ -49,10 +53,12 @@ Description:
 		will be changed only in device RAM, so it will be cleared when
 		power is lost. Trigger a 'save' to EEPROM command to keep
 		values after power-on. Read or write are :
+
 			* '9..14': device resolution in bit
-			or resolution to set in bit
+			  or resolution to set in bit
 			* '-xx': xx is kernel error when reading the resolution
 			* Anything else: do nothing
+
 		Some DS18B20 clones are fixed in 12-bit resolution, so the
 		actual resolution is read back from the chip and verified. Error
 		is reported if the results differ.
@@ -65,16 +71,18 @@ Date:		May 2020
 Contact:	Akira Shimahara <akira215corp@gmail.com>
 Description:
 		(RO) return the temperature in 1/1000 degC.
+
 			* If a bulk read has been triggered, it will directly
-			return the temperature computed when the bulk read
-			occurred, if available. If not yet available, nothing
-			is returned (a debug kernel message is sent), you
-			should retry later on.
+			  return the temperature computed when the bulk read
+			  occurred, if available. If not yet available, nothing
+			  is returned (a debug kernel message is sent), you
+			  should retry later on.
 			* If no bulk read has been triggered, it will trigger
-			a conversion and send the result. Note that the
-			conversion duration depend on the resolution (if
-			device support this feature). It takes 94ms in 9bits
-			resolution, 750ms for 12bits.
+			  a conversion and send the result. Note that the
+			  conversion duration depend on the resolution (if
+			  device support this feature). It takes 94ms in 9bits
+			  resolution, 750ms for 12bits.
+
 Users:		any user space application which wants to communicate with
 		w1_term device
 
@@ -86,12 +94,14 @@ Description:
 		(RW) return the temperature in 1/1000 degC.
 		*read*: return 2 lines with the hexa output data sent on the
 		bus, return the CRC check and temperature in 1/1000 degC
-		*write* :
+		*write*:
+
 			* '0' : save the 2 or 3 bytes to the device EEPROM
-			(i.e. TH, TL and config register)
+			  (i.e. TH, TL and config register)
 			* '9..14' : set the device resolution in RAM
-			(if supported)
+			  (if supported)
 			* Anything else: do nothing
+
 		refer to Documentation/w1/slaves/w1_therm.rst for detailed
 		information.
 Users:		any user space application which wants to communicate with
@@ -103,14 +113,21 @@ Date:		May 2020
 Contact:	Akira Shimahara <akira215corp@gmail.com>
 Description:
 		(RW) trigger a bulk read conversion. read the status
+
 		*read*:
-			* '-1': conversion in progress on at least 1 sensor
-			* '1' :	conversion complete but at least one sensor
+			* '-1':
+				conversion in progress on at least 1 sensor
+			* '1' :
+				conversion complete but at least one sensor
 				value has not been read yet
-			* '0' :	no bulk operation. Reading temperature will
+			* '0' :
+				no bulk operation. Reading temperature will
 				trigger a conversion on each device
-		*write*: 'trigger': trigger a bulk read on all supporting
+
+		*write*:
+			'trigger': trigger a bulk read on all supporting
 			devices on the bus
+
 		Note that if a bulk read is sent but one sensor is not read
 		immediately, the next access to temperature on this device
 		will return the temperature measured at the time of issue
@@ -128,14 +145,19 @@ Description:
 		reset to default (datasheet) conversion time for a new
 		resolution.
 
-		*read*: Actual conversion time in milliseconds. *write*:
-			'0': Set the default conversion time from the datasheet.
-			'1': Measure and set the conversion time. Make a single
+		*read*:
+			Actual conversion time in milliseconds.
+
+		*write*:
+			* '0':
+			     Set the default conversion time from the datasheet.
+			* '1':
+			     Measure and set the conversion time. Make a single
 			     temperature conversion, measure an actual value.
 			     Increase it by 20% for temperature range. A new
 			     conversion time can be obtained by reading this
 			     same attribute.
-			other positive value:
+			* other positive value:
 			     Set the conversion time in milliseconds.
 
 Users:		An application using the w1_term device
@@ -148,16 +170,21 @@ Description:
 		(RW) Control optional driver settings.
 		Bit masks to read/write (bitwise OR):
 
-                1: Enable check for conversion success. If byte 6 of
+		== ============================================================
+                 1 Enable check for conversion success. If byte 6 of
                    scratchpad memory is 0xC after conversion, and
                    temperature reads 85.00 (powerup value) or 127.94
                    (insufficient power) - return a conversion error.
 
-                2: Enable poll for conversion completion. Generate read cycles
+                2  Enable poll for conversion completion. Generate read cycles
                    after the conversion start and wait for 1's. In parasite
                    power mode this feature is not available.
+		== ============================================================
 
-		*read*:  Currently selected features.
-		*write*: Select features.
+		*read*:
+		    Currently selected features.
+
+		*write*:
+		    Select features.
 
 Users:		An application using the w1_term device
diff --git a/Documentation/ABI/testing/sysfs-platform-dfl-fme b/Documentation/ABI/testing/sysfs-platform-dfl-fme
index 3683cb1cdc3d..d6ab34e81b9b 100644
--- a/Documentation/ABI/testing/sysfs-platform-dfl-fme
+++ b/Documentation/ABI/testing/sysfs-platform-dfl-fme
@@ -113,8 +113,11 @@ KernelVersion:	5.5
 Contact:	Wu Hao <hao.wu@intel.com>
 Description:	Read-Only. Read this file to get the name of hwmon device, it
 		supports values:
-		    'dfl_fme_thermal' - thermal hwmon device name
-		    'dfl_fme_power'   - power hwmon device name
+
+		=================  =========================
+		'dfl_fme_thermal'  thermal hwmon device name
+		'dfl_fme_power'    power hwmon device name
+		=================  =========================
 
 What:		/sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/temp1_input
 Date:		October 2019
@@ -169,8 +172,11 @@ KernelVersion:	5.5
 Contact:	Wu Hao <hao.wu@intel.com>
 Description:	Read-Only. Read this file to get the policy of hardware threshold1
 		(see 'temp1_max'). It only supports two values (policies):
-		    0 - AP2 state (90% throttling)
-		    1 - AP1 state (50% throttling)
+
+		==  ==========================
+		 0  AP2 state (90% throttling)
+	         1  AP1 state (50% throttling)
+		==  ==========================
 
 What:		/sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_input
 Date:		October 2019
diff --git a/Documentation/ABI/testing/sysfs-platform-dptf b/Documentation/ABI/testing/sysfs-platform-dptf
index 2cbc660d163b..141834342a4d 100644
--- a/Documentation/ABI/testing/sysfs-platform-dptf
+++ b/Documentation/ABI/testing/sysfs-platform-dptf
@@ -27,12 +27,15 @@ KernelVersion:	v4.10
 Contact:	linux-acpi@vger.kernel.org
 Description:
 		(RO) Display the platform power source
+
+		========= ============================
 		bits[3:0] Current power source
-			0x00 = DC
-			0x01 = AC
-			0x02 = USB
-			0x03 = Wireless Charger
+			  - 0x00 = DC
+			  - 0x01 = AC
+			  - 0x02 = USB
+			  - 0x03 = Wireless Charger
 		bits[7:4] Power source sequence number
+		========= ============================
 
 What:		/sys/bus/platform/devices/INT3407:00/dptf_power/battery_steady_power
 Date:		Jul, 2016
diff --git a/Documentation/ABI/testing/sysfs-platform-intel-wmi-sbl-fw-update b/Documentation/ABI/testing/sysfs-platform-intel-wmi-sbl-fw-update
index 5aa618987cad..02ae1e9bbfc8 100644
--- a/Documentation/ABI/testing/sysfs-platform-intel-wmi-sbl-fw-update
+++ b/Documentation/ABI/testing/sysfs-platform-intel-wmi-sbl-fw-update
@@ -8,5 +8,6 @@ Description:
 		of 0 and userspace can signal SBL to update firmware,
 		on next reboot, by writing a value of 1.
 		There are two available states:
+
 		    * 0 -> Skip firmware update while rebooting
 		    * 1 -> Attempt firmware update on next reboot
diff --git a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl
index 401d202f478b..e79ca22e2f45 100644
--- a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl
+++ b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl
@@ -5,10 +5,13 @@ Contact:	"Liming Sun <lsun@mellanox.com>"
 Description:
 		The Life-cycle state of the SoC, which could be one of the
 		following values.
-		  Production - Production state and can be updated to secure
-		  GA Secured - Secure chip and not able to change state
-		  GA Non-Secured - Non-Secure chip and not able to change state
-		  RMA - Return Merchandise Authorization
+
+		==============  =============================================
+		Production      Production state and can be updated to secure
+		GA Secured      Secure chip and not able to change state
+		GA Non-Secured  Non-Secure chip and not able to change state
+		RMA             Return Merchandise Authorization
+		==============  =============================================
 
 What:		/sys/bus/platform/devices/MLNXBF04:00/post_reset_wdog
 Date:		Oct 2019
@@ -25,10 +28,13 @@ KernelVersion:	5.5
 Contact:	"Liming Sun <lsun@mellanox.com>"
 Description:
 		The source of the boot stream for the next reset. It could be
-		one of the following values.
-		  external - boot from external source (USB or PCIe)
-		  emmc - boot from the onchip eMMC
-		  emmc_legacy - boot from the onchip eMMC in legacy (slow) mode
+		one of the following values:
+
+		===========  ===============================================
+		external     boot from external source (USB or PCIe)
+		emmc         boot from the onchip eMMC
+		emmc_legacy  boot from the onchip eMMC in legacy (slow) mode
+		===========  ===============================================
 
 What:		/sys/bus/platform/devices/MLNXBF04:00/second_reset_action
 Date:		Oct 2019
@@ -38,11 +44,14 @@ Description:
 		Update the source of the boot stream after next reset. It could
 		be one of the following values and will be applied after next
 		reset.
-		  external - boot from external source (USB or PCIe)
-		  emmc - boot from the onchip eMMC
-		  emmc_legacy - boot from the onchip eMMC in legacy (slow) mode
-		  swap_emmc - swap the primary / secondary boot partition
-		  none - cancel the action
+
+		===========  ===============================================
+		external     boot from external source (USB or PCIe)
+		emmc         boot from the onchip eMMC
+		emmc_legacy  boot from the onchip eMMC in legacy (slow) mode
+		swap_emmc    swap the primary / secondary boot partition
+		none         cancel the action
+		===========  ===============================================
 
 What:		/sys/bus/platform/devices/MLNXBF04:00/secure_boot_fuse_state
 Date:		Oct 2019
@@ -50,9 +59,12 @@ KernelVersion:	5.5
 Contact:	"Liming Sun <lsun@mellanox.com>"
 Description:
 		The state of eFuse versions with the following values.
-		  InUse - burnt, valid and currently in use
-		  Used - burnt and valid
-		  Free - not burnt and free to use
-		  Skipped - not burnt but not free (skipped)
-		  Wasted - burnt and invalid
-		  Invalid - not burnt but marked as valid (error state).
+
+		=======  ===============================================
+		InUse    burnt, valid and currently in use
+		Used     burnt and valid
+		Free     not burnt and free to use
+		Skipped  not burnt but not free (skipped)
+		Wasted   burnt and invalid
+		Invalid  not burnt but marked as valid (error state).
+		=======  ===============================================
diff --git a/Documentation/ABI/testing/sysfs-platform-wilco-ec b/Documentation/ABI/testing/sysfs-platform-wilco-ec
index 5f60b184a5a5..4439d0644091 100644
--- a/Documentation/ABI/testing/sysfs-platform-wilco-ec
+++ b/Documentation/ABI/testing/sysfs-platform-wilco-ec
@@ -39,6 +39,7 @@ Description:
                which affects charging via the special USB PowerShare port
                (marked with a small lightning bolt or battery icon) when in
                low power states:
+
                - In S0, the port will always provide power.
                - In S0ix, if usb_charge is enabled, then power will be
                  supplied to the port when on AC or if battery is > 50%.
