| Message ID | af01d0887e78b55f2af0a251837f7d13a00905bc.1683523370.git.quic_varada@quicinc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Daniel Lezcano |
| Headers | show |
| Series | Enable IPQ9574 TSENS support | expand |
On 8.05.2023 07:32, Varadarajan Narayanan wrote: > This patch adds thermal zone nodes for the various > sensors present in IPQ9574 > > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com> > Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > --- > [v2]: > Rename clusterX nodes as cpussX nodes > > [v1]: > Fix node names > --- > arch/arm64/boot/dts/qcom/ipq9574.dtsi | 208 ++++++++++++++++++++++++++++++++++ > 1 file changed, 208 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi > index 85bba6a..5a29ee7 100644 > --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi > +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi > @@ -1067,6 +1067,214 @@ > }; > }; > > + thermal-zones { > + nss-top-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + thermal-sensors = <&tsens 3>; > + > + trips { > + nss-top-critical { > + temperature = <125000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + }; > + > + ubi-0-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + thermal-sensors = <&tsens 4>; > + > + trips { > + ubi_0-critical { no underscores in node names Konrad > + temperature = <125000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + }; > + > + ubi-1-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + thermal-sensors = <&tsens 5>; > + > + trips { > + ubi_1-critical { > + temperature = <125000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + }; > + > + ubi-2-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + thermal-sensors = <&tsens 6>; > + > + trips { > + ubi_2-critical { > + temperature = <125000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + }; > + > + ubi-3-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + thermal-sensors = <&tsens 7>; > + > + trips { > + ubi_3-critical { > + temperature = <125000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + }; > + > + cpuss0-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + thermal-sensors = <&tsens 8>; > + > + trips { > + cpu-critical { > + temperature = <125000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + }; > + > + cpuss1-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + thermal-sensors = <&tsens 9>; > + > + trips { > + cpu-critical { > + temperature = <125000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + }; > + > + cpu0-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + thermal-sensors = <&tsens 10>; > + > + trips { > + cpu-critical { > + temperature = <120000>; > + hysteresis = <10000>; > + type = "critical"; > + }; > + > + cpu-passive { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "passive"; > + }; > + }; > + }; > + > + cpu1-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + thermal-sensors = <&tsens 11>; > + > + trips { > + cpu-critical { > + temperature = <120000>; > + hysteresis = <10000>; > + type = "critical"; > + }; > + > + cpu-passive { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "passive"; > + }; > + }; > + }; > + > + cpu2-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + thermal-sensors = <&tsens 12>; > + > + trips { > + cpu-critical { > + temperature = <120000>; > + hysteresis = <10000>; > + type = "critical"; > + }; > + > + cpu-passive { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "passive"; > + }; > + }; > + }; > + > + cpu3-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + thermal-sensors = <&tsens 13>; > + > + trips { > + cpu-critical { > + temperature = <120000>; > + hysteresis = <10000>; > + type = "critical"; > + }; > + > + cpu-passive { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "passive"; > + }; > + }; > + }; > + > + wcss-phyb-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + thermal-sensors = <&tsens 14>; > + > + trips { > + wcss_phyb-critical { > + temperature = <125000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + }; > + > + top-glue-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + thermal-sensors = <&tsens 15>; > + > + trips { > + top_glue-critical { > + temperature = <125000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + }; > + }; > + > timer { > compatible = "arm,armv8-timer"; > interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi index 85bba6a..5a29ee7 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi @@ -1067,6 +1067,214 @@ }; }; + thermal-zones { + nss-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 3>; + + trips { + nss-top-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + ubi-0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 4>; + + trips { + ubi_0-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + ubi-1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 5>; + + trips { + ubi_1-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + ubi-2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 6>; + + trips { + ubi_2-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + ubi-3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 7>; + + trips { + ubi_3-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 8>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 9>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 10>; + + trips { + cpu-critical { + temperature = <120000>; + hysteresis = <10000>; + type = "critical"; + }; + + cpu-passive { + temperature = <110000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 11>; + + trips { + cpu-critical { + temperature = <120000>; + hysteresis = <10000>; + type = "critical"; + }; + + cpu-passive { + temperature = <110000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 12>; + + trips { + cpu-critical { + temperature = <120000>; + hysteresis = <10000>; + type = "critical"; + }; + + cpu-passive { + temperature = <110000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 13>; + + trips { + cpu-critical { + temperature = <120000>; + hysteresis = <10000>; + type = "critical"; + }; + + cpu-passive { + temperature = <110000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + wcss-phyb-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 14>; + + trips { + wcss_phyb-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + top-glue-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 15>; + + trips { + top_glue-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,