@@ -29,12 +29,20 @@
LOONGSON2_THSENS_INT_HIGH)
#define LOONGSON2_THSENS_OUT_MASK 0xFF
+/*
+ * This flag is used to indicate the temperature reading
+ * method of the Loongson-2K2000
+ */
+#define LS2K2000_THSENS_OUT_FLAG BIT(0)
+
struct loongson2_thermal_chip_data {
unsigned int thermal_sensor_sel;
+ unsigned int flags;
};
struct loongson2_thermal_data {
- void __iomem *regs;
+ void __iomem *ctrl_reg;
+ void __iomem *temp_reg;
const struct loongson2_thermal_chip_data *chip_data;
};
@@ -48,7 +56,7 @@ static void loongson2_set_ctrl_regs(struct loongson2_thermal_data *data,
reg_ctrl = ctrl_data + HECTO;
reg_ctrl |= enable ? 0x100 : 0;
- writew(reg_ctrl, data->regs + ctrl_reg + reg_off);
+ writew(reg_ctrl, data->ctrl_reg + ctrl_reg + reg_off);
}
static int loongson2_thermal_set(struct loongson2_thermal_data *data,
@@ -65,11 +73,16 @@ static int loongson2_thermal_set(struct loongson2_thermal_data *data,
static int loongson2_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
{
- u32 reg_val;
+ int val;
struct loongson2_thermal_data *data = thermal_zone_device_priv(tz);
- reg_val = readl(data->regs + LOONGSON2_THSENS_OUT_REG);
- *temp = ((reg_val & LOONGSON2_THSENS_OUT_MASK) - HECTO) * KILO;
+ if (data->chip_data->flags) {
+ val = readl(data->temp_reg);
+ *temp = ((val & 0xffff) * 820 / 0x4000 - 311) * KILO;
+ } else {
+ val = readl(data->ctrl_reg + LOONGSON2_THSENS_OUT_REG);
+ *temp = ((val & LOONGSON2_THSENS_OUT_MASK) - HECTO) * KILO;
+ }
return 0;
}
@@ -79,7 +92,7 @@ static irqreturn_t loongson2_thermal_irq_thread(int irq, void *dev)
struct thermal_zone_device *tzd = dev;
struct loongson2_thermal_data *data = thermal_zone_device_priv(tzd);
- writeb(LOONGSON2_THSENS_INT_EN, data->regs + LOONGSON2_THSENS_STATUS_REG);
+ writeb(LOONGSON2_THSENS_INT_EN, data->ctrl_reg + LOONGSON2_THSENS_STATUS_REG);
thermal_zone_device_update(tzd, THERMAL_EVENT_UNSPECIFIED);
@@ -112,15 +125,22 @@ static int loongson2_thermal_probe(struct platform_device *pdev)
data->chip_data = device_get_match_data(dev);
- data->regs = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(data->regs))
- return PTR_ERR(data->regs);
+ data->ctrl_reg = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(data->ctrl_reg))
+ return PTR_ERR(data->ctrl_reg);
+
+ /* The temperature output register is separate for Loongson-2K2000 */
+ if (data->chip_data->flags) {
+ data->temp_reg = devm_platform_ioremap_resource(pdev, 1);
+ if (IS_ERR(data->temp_reg))
+ return PTR_ERR(data->temp_reg);
+ }
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
- writeb(LOONGSON2_THSENS_INT_EN, data->regs + LOONGSON2_THSENS_STATUS_REG);
+ writeb(LOONGSON2_THSENS_INT_EN, data->ctrl_reg + LOONGSON2_THSENS_STATUS_REG);
loongson2_thermal_set(data, 0, 0, false);
@@ -147,6 +167,12 @@ static int loongson2_thermal_probe(struct platform_device *pdev)
static const struct loongson2_thermal_chip_data loongson2_thermal_ls2k1000_data = {
.thermal_sensor_sel = 0,
+ .flags = 0,
+};
+
+static const struct loongson2_thermal_chip_data loongson2_thermal_ls2k2000_data = {
+ .thermal_sensor_sel = 0,
+ .flags = LS2K2000_THSENS_OUT_FLAG,
};
static const struct of_device_id of_loongson2_thermal_match[] = {
@@ -154,6 +180,10 @@ static const struct of_device_id of_loongson2_thermal_match[] = {
.compatible = "loongson,ls2k1000-thermal",
.data = &loongson2_thermal_ls2k1000_data,
},
+ {
+ .compatible = "loongson,ls2k2000-thermal",
+ .data = &loongson2_thermal_ls2k2000_data,
+ },
{ /* end */ }
};
MODULE_DEVICE_TABLE(of, of_loongson2_thermal_match);
The Loongson-2K2000 and Loongson-2K1000 have similar thermal sensors, except that the temperature is read differently. In particular, the temperature output registers of the Loongson-2K2000 are defined in the chip configuration domain and are read in a different way. Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> --- drivers/thermal/loongson2_thermal.c | 50 +++++++++++++++++++++++------ 1 file changed, 40 insertions(+), 10 deletions(-)