@@ -5657,6 +5657,7 @@ F: drivers/cpufreq/
F: include/linux/cpufreq.h
F: include/linux/sched/cpufreq.h
F: kernel/sched/cpufreq*.c
+F: rust/kernel/cpufreq.rs
F: tools/testing/selftests/cpufreq/
CPU HOTPLUG
@@ -7,6 +7,7 @@
*/
#include <kunit/test.h>
+#include <linux/cpufreq.h>
#include <linux/errname.h>
#include <linux/ethtool.h>
#include <linux/firmware.h>
@@ -24,6 +24,7 @@
#include <linux/bug.h>
#include <linux/build_bug.h>
#include <linux/cpumask.h>
+#include <linux/cpufreq.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/errname.h>
@@ -357,6 +358,20 @@ void rust_helper_free_cpumask_var(cpumask_var_t mask)
EXPORT_SYMBOL_GPL(rust_helper_free_cpumask_var);
#endif
+#ifdef CONFIG_CPU_FREQ
+unsigned int rust_helper_cpufreq_table_len(struct cpufreq_frequency_table *freq_table)
+{
+ return cpufreq_table_len(freq_table);
+}
+EXPORT_SYMBOL_GPL(rust_helper_cpufreq_table_len);
+
+void rust_helper_cpufreq_register_em_with_opp(struct cpufreq_policy *policy)
+{
+ cpufreq_register_em_with_opp(policy);
+}
+EXPORT_SYMBOL_GPL(rust_helper_cpufreq_register_em_with_opp);
+#endif
+
#ifndef CONFIG_OF_DYNAMIC
struct device_node *rust_helper_of_node_get(struct device_node *node)
{
new file mode 100644
@@ -0,0 +1,254 @@
+// SPDX-License-Identifier: GPL-2.0
+
+//! CPU frequency scaling.
+//!
+//! This module provides bindings for interacting with the cpufreq subsystem.
+//!
+//! C header: [`include/linux/cpufreq.h`](srctree/include/linux/cpufreq.h)
+
+use crate::{
+ bindings,
+ error::{code::*, to_result, Result},
+ prelude::*,
+};
+
+use core::{
+ pin::Pin,
+};
+
+/// Default transition latency value.
+pub const ETERNAL_LATENCY: u32 = bindings::CPUFREQ_ETERNAL as u32;
+
+/// Container for cpufreq driver flags.
+pub mod flags {
+ use crate::bindings;
+
+ /// Set by drivers that need to update internal upper and lower boundaries along with the
+ /// target frequency and so the core and governors should also invoke the driver if the target
+ /// frequency does not change, but the policy min or max may have changed.
+ pub const NEED_UPDATE_LIMITS: u16 = bindings::CPUFREQ_NEED_UPDATE_LIMITS as _;
+
+ /// Set by drivers for platforms where loops_per_jiffy or other kernel "constants" aren't
+ /// affected by frequency transitions.
+ pub const CONST_LOOPS: u16 = bindings::CPUFREQ_CONST_LOOPS as _;
+
+ /// Set by drivers that want the core to automatically register the cpufreq driver as a thermal
+ /// cooling device.
+ pub const IS_COOLING_DEV: u16 = bindings::CPUFREQ_IS_COOLING_DEV as _;
+
+ /// Set by drivers for platforms that have multiple clock-domains, i.e. supporting multiple
+ /// policies. With this sysfs directories of governor would be created in cpu/cpuN/cpufreq/
+ /// directory and so they can use the same governor with different tunables for different
+ /// clusters.
+ pub const HAVE_GOVERNOR_PER_POLICY: u16 = bindings::CPUFREQ_HAVE_GOVERNOR_PER_POLICY as _;
+
+ /// Set by drivers which do POSTCHANGE notifications from outside of their ->target() routine.
+ pub const ASYNC_NOTIFICATION: u16 = bindings::CPUFREQ_ASYNC_NOTIFICATION as _;
+
+ /// Set by drivers that want cpufreq core to check if CPU is running at a frequency present in
+ /// freq-table exposed by the driver. For these drivers if CPU is found running at an out of
+ /// table freq, the cpufreq core will try to change the frequency to a value from the table.
+ /// And if that fails, it will stop further boot process by issuing a BUG_ON().
+ pub const NEED_INITIAL_FREQ_CHECK: u16 = bindings::CPUFREQ_NEED_INITIAL_FREQ_CHECK as _;
+
+ /// Set by drivers to disallow use of governors with "dynamic_switching" flag set.
+ pub const NO_AUTO_DYNAMIC_SWITCHING: u16 = bindings::CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING as _;
+}
+
+/// CPU frequency selection relations. Each value contains a `bool` argument which corresponds to
+/// the Relation being efficient.
+#[derive(Copy, Clone, Debug, Eq, PartialEq)]
+pub enum Relation {
+ /// Select the lowest frequency at or above target.
+ Low(bool),
+ /// Select the highest frequency below or at target.
+ High(bool),
+ /// Select the closest frequency to the target.
+ Close(bool),
+}
+
+impl Relation {
+ // Converts from a value compatible with the C code.
+ fn new(val: u32) -> Result<Self> {
+ let efficient = val & bindings::CPUFREQ_RELATION_E != 0;
+
+ Ok(match val & !bindings::CPUFREQ_RELATION_E {
+ bindings::CPUFREQ_RELATION_L => Self::Low(efficient),
+ bindings::CPUFREQ_RELATION_H => Self::High(efficient),
+ bindings::CPUFREQ_RELATION_C => Self::Close(efficient),
+ _ => return Err(EINVAL),
+ })
+ }
+
+ /// Converts to a value compatible with the C code.
+ pub fn val(&self) -> u32 {
+ let (mut val, e) = match self {
+ Self::Low(e) => (bindings::CPUFREQ_RELATION_L, e),
+ Self::High(e) => (bindings::CPUFREQ_RELATION_H, e),
+ Self::Close(e) => (bindings::CPUFREQ_RELATION_C, e),
+ };
+
+ if *e {
+ val |= bindings::CPUFREQ_RELATION_E;
+ }
+
+ val
+ }
+}
+
+/// Equivalent to `struct cpufreq_policy_data` in the C code.
+#[repr(transparent)]
+pub struct PolicyData(*mut bindings::cpufreq_policy_data);
+
+impl PolicyData {
+ /// Creates new instance of [`PolicyData`].
+ ///
+ /// # Safety
+ ///
+ /// Callers must ensure that `ptr` is valid and non-null.
+ pub unsafe fn from_raw_policy_data(ptr: *mut bindings::cpufreq_policy_data) -> Self {
+ Self(ptr)
+ }
+
+ /// Returns the raw pointer to the C structure.
+ #[inline]
+ pub fn as_raw(&self) -> *mut bindings::cpufreq_policy_data {
+ self.0
+ }
+
+ /// Provides a wrapper to the generic verify routine.
+ pub fn generic_verify(&self) -> Result<()> {
+ // SAFETY: By the type invariants, we know that `self` owns a reference, so it is safe to
+ // use it now.
+ to_result(unsafe { bindings::cpufreq_generic_frequency_table_verify(self.as_raw()) })
+ }
+}
+
+/// Builder for the `struct cpufreq_frequency_table` in the C code.
+#[repr(transparent)]
+#[derive(Default)]
+pub struct TableBuilder {
+ entries: Vec<bindings::cpufreq_frequency_table>,
+}
+
+impl TableBuilder {
+ /// Creates new instance of [`TableBuilder`].
+ pub fn new() -> Self {
+ Self {
+ entries: Vec::new(),
+ }
+ }
+
+ /// Adds a new entry to the table.
+ pub fn add(&mut self, frequency: u32, flags: u32, driver_data: u32) -> Result<()> {
+ // Adds new entry to the end of the vector.
+ Ok(self.entries.push(
+ bindings::cpufreq_frequency_table {
+ flags,
+ driver_data,
+ frequency,
+ },
+ GFP_KERNEL,
+ )?)
+ }
+
+ /// Creates [`Table`] from [`TableBuilder`].
+ pub fn into_table(mut self) -> Result<Table> {
+ // Add last entry to the table.
+ self.add(bindings::CPUFREQ_TABLE_END as u32, 0, 0)?;
+ Table::from_builder(self.entries)
+ }
+}
+
+/// A simple implementation of the cpufreq table, equivalent to the `struct
+/// cpufreq_frequency_table` in the C code.
+pub struct Table {
+ #[allow(dead_code)]
+ // Dynamically created table.
+ entries: Option<Pin<Vec<bindings::cpufreq_frequency_table>>>,
+
+ // Pointer to the statically or dynamically created table.
+ ptr: *mut bindings::cpufreq_frequency_table,
+
+ // Number of entries in the table.
+ len: usize,
+}
+
+impl Table {
+ /// Creates new instance of [`Table`] from [`TableBuilder`].
+ fn from_builder(entries: Vec<bindings::cpufreq_frequency_table>) -> Result<Self> {
+ let len = entries.len();
+ if len == 0 {
+ return Err(EINVAL);
+ }
+
+ // Pin the entries to memory, since we are passing its pointer to the C code.
+ let mut entries = Pin::new(entries);
+
+ // The pointer is valid until the table gets dropped.
+ let ptr = entries.as_mut_ptr();
+
+ Ok(Self {
+ entries: Some(entries),
+ ptr,
+ // The last entry in table is reserved for `CPUFREQ_TABLE_END`.
+ len: len - 1,
+ })
+ }
+
+ /// Creates new instance of [`Table`] from raw pointer.
+ ///
+ /// # Safety
+ ///
+ /// Callers must ensure that `ptr` is valid and non-null for the lifetime of the [`Table`].
+ pub unsafe fn from_raw(ptr: *mut bindings::cpufreq_frequency_table) -> Self {
+ Self {
+ entries: None,
+ ptr,
+ // SAFETY: The pointer is guaranteed to be valid for the lifetime of `Self`.
+ len: unsafe { bindings::cpufreq_table_len(ptr) } as usize,
+ }
+ }
+
+ // Validate the index.
+ fn validate(&self, index: usize) -> Result<()> {
+ if index >= self.len {
+ Err(EINVAL)
+ } else {
+ Ok(())
+ }
+ }
+
+ /// Returns raw pointer to the `struct cpufreq_frequency_table` compatible with the C code.
+ #[inline]
+ pub fn as_raw(&self) -> *mut bindings::cpufreq_frequency_table {
+ self.ptr
+ }
+
+ /// Returns `frequency` at index in the [`Table`].
+ pub fn freq(&self, index: usize) -> Result<u32> {
+ self.validate(index)?;
+
+ // SAFETY: The pointer is guaranteed to be valid for the lifetime of `self` and `index` is
+ // also validated before this and is guaranteed to be within limits of the frequency table.
+ Ok(unsafe { (*self.ptr.add(index)).frequency })
+ }
+
+ /// Returns `flags` at index in the [`Table`].
+ pub fn flags(&self, index: usize) -> Result<u32> {
+ self.validate(index)?;
+
+ // SAFETY: The pointer is guaranteed to be valid for the lifetime of `self` and `index` is
+ // also validated before this and is guaranteed to be within limits of the frequency table.
+ Ok(unsafe { (*self.ptr.add(index)).flags })
+ }
+
+ /// Returns `data` at index in the [`Table`].
+ pub fn data(&self, index: usize) -> Result<u32> {
+ self.validate(index)?;
+
+ // SAFETY: The pointer is guaranteed to be valid for the lifetime of `self` and `index` is
+ // also validated before this and is guaranteed to be within limits of the frequency table.
+ Ok(unsafe { (*self.ptr.add(index)).driver_data })
+ }
+}
@@ -30,6 +30,8 @@
pub mod alloc;
mod build_assert;
pub mod clk;
+#[cfg(CONFIG_CPU_FREQ)]
+pub mod cpufreq;
pub mod cpumask;
pub mod device;
pub mod device_id;