diff mbox

[PATCHv3,1/1] IB/ipoib: add get_link_ksettings in ethtool

Message ID 1493875491-32048-2-git-send-email-yanjun.zhu@oracle.com (mailing list archive)
State Accepted
Headers show

Commit Message

Zhu Yanjun May 4, 2017, 5:24 a.m. UTC 
In order to let the bonding driver report the correct speed
of the underlaying interfaces, when they are IPoIB, the ethtool
function get_link_ksettings() in the IPoIB driver is implemented.

Cc: Joe Jin <joe.jin@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Suggested-by: Håkon Bugge <Haakon.Bugge@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
---
Changes V2-->V3
  Replace get_settings with get_link_ksettings.
---
 drivers/infiniband/ulp/ipoib/ipoib_ethtool.c | 59 ++++++++++++++++++++++++++++
 include/uapi/linux/ethtool.h                 |  1 +
 2 files changed, 60 insertions(+)

Comments

Doug Ledford May 4, 2017, 11:45 p.m. UTC | #1 
On Thu, 2017-05-04 at 01:24 -0400, Zhu Yanjun wrote:
> In order to let the bonding driver report the correct speed
> of the underlaying interfaces, when they are IPoIB, the ethtool
> function get_link_ksettings() in the IPoIB driver is implemented.
> 
> Cc: Joe Jin <joe.jin@oracle.com>
> Cc: Junxiao Bi <junxiao.bi@oracle.com>
> Suggested-by: Håkon Bugge <Haakon.Bugge@oracle.com>
> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>

Thanks.  Since I had a second pull request to send this merge window,
I've taken this in for that pull request.
diff mbox

Patch

diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c b/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c
index bac455a..dd00775 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c
@@ -155,7 +155,66 @@  static int ipoib_get_sset_count(struct net_device __always_unused *dev,
 	return -EOPNOTSUPP;
 }
 
+/* Return lane speed in unit of 1e6 bit/sec */
+static inline int ib_speed_enum_to_int(int speed)
+{
+	switch (speed) {
+	case IB_SPEED_SDR:
+		return SPEED_2500;
+	case IB_SPEED_DDR:
+		return SPEED_5000;
+	case IB_SPEED_QDR:
+	case IB_SPEED_FDR10:
+		return SPEED_10000;
+	case IB_SPEED_FDR:
+		return SPEED_14000;
+	case IB_SPEED_EDR:
+		return SPEED_25000;
+	}
+
+	return SPEED_UNKNOWN;
+}
+
+static int ipoib_get_link_ksettings(struct net_device *netdev,
+				    struct ethtool_link_ksettings *cmd)
+{
+	struct ipoib_dev_priv *priv = netdev_priv(netdev);
+	struct ib_port_attr attr;
+	int ret, speed, width;
+
+	if (!netif_carrier_ok(netdev)) {
+		cmd->base.speed = SPEED_UNKNOWN;
+		cmd->base.duplex = DUPLEX_UNKNOWN;
+		return 0;
+	}
+
+	ret = ib_query_port(priv->ca, priv->port, &attr);
+	if (ret < 0)
+		return -EINVAL;
+
+	speed = ib_speed_enum_to_int(attr.active_speed);
+	width = ib_width_enum_to_int(attr.active_width);
+
+	if (speed < 0 || width < 0)
+		return -EINVAL;
+
+	/* Except the following are set, the other members of
+	 * the struct ethtool_link_settings are initialized to
+	 * zero in the function __ethtool_get_link_ksettings.
+	 */
+	cmd->base.speed		 = speed * width;
+	cmd->base.duplex	 = DUPLEX_FULL;
+
+	cmd->base.phy_address	 = 0xFF;
+
+	cmd->base.autoneg	 = AUTONEG_ENABLE;
+	cmd->base.port		 = PORT_OTHER;
+
+	return 0;
+}
+
 static const struct ethtool_ops ipoib_ethtool_ops = {
+	.get_link_ksettings	= ipoib_get_link_ksettings,
 	.get_drvinfo		= ipoib_get_drvinfo,
 	.get_coalesce		= ipoib_get_coalesce,
 	.set_coalesce		= ipoib_set_coalesce,
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index 3dc91a4..55c3dcd 100644
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -1493,6 +1493,7 @@  enum ethtool_link_mode_bit_indices {
 #define SPEED_2500		2500
 #define SPEED_5000		5000
 #define SPEED_10000		10000
+#define SPEED_14000		14000
 #define SPEED_20000		20000
 #define SPEED_25000		25000
 #define SPEED_40000		40000