| Message ID | 20170722220942.78852-9-salil.mehta@huawei.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
On Sat, Jul 22, 2017 at 11:09:42PM +0100, Salil Mehta wrote: > This patch updates the MAINTAINERS file with HNS3 Ethernet driver > maintainers names and other details. This also introduces the new > Makefiles required to build the HNS3 Ethernet driver and updates > the existing Kconfig file in the hisilicon folder. > > Signed-off-by: Salil Mehta <salil.mehta@huawei.com> > --- > Patch V3: Addressed below errors: > 1. Intel kbuild: https://lkml.org/lkml/2017/6/14/313 > 2. Intel Kbuild: https://lkml.org/lkml/2017/6/14/636 > Patch V2: No change > Patch V1: Initial Submit > --- > MAINTAINERS | 8 +++++++ > drivers/net/ethernet/hisilicon/Kconfig | 27 ++++++++++++++++++++++ > drivers/net/ethernet/hisilicon/Makefile | 1 + > drivers/net/ethernet/hisilicon/hns3/Makefile | 7 ++++++ > .../net/ethernet/hisilicon/hns3/hns3pf/Makefile | 11 +++++++++ > 5 files changed, 54 insertions(+) > create mode 100644 drivers/net/ethernet/hisilicon/hns3/Makefile > create mode 100644 drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile > > diff --git a/MAINTAINERS b/MAINTAINERS > index 297e610c9163..a22d5b86c2b7 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -6197,6 +6197,14 @@ S: Maintained > F: drivers/net/ethernet/hisilicon/ > F: Documentation/devicetree/bindings/net/hisilicon*.txt > > +HISILICON NETWORK SUBSYSTEM 3 DRIVER (HNS3) > +M: Yisen Zhuang <yisen.zhuang@huawei.com> > +M: Salil Mehta <salil.mehta@huawei.com> > +L: netdev@vger.kernel.org > +W: http://www.hisilicon.com > +S: Maintained > +F: drivers/net/ethernet/hisilicon/hns3/ > + > HISILICON ROCE DRIVER > M: Lijun Ou <oulijun@huawei.com> > M: Wei Hu(Xavier) <xavier.huwei@huawei.com> > diff --git a/drivers/net/ethernet/hisilicon/Kconfig b/drivers/net/ethernet/hisilicon/Kconfig > index d11287e11371..9f8ea283c531 100644 > --- a/drivers/net/ethernet/hisilicon/Kconfig > +++ b/drivers/net/ethernet/hisilicon/Kconfig > @@ -76,4 +76,31 @@ config HNS_ENET > This selects the general ethernet driver for HNS. This module make > use of any HNS AE driver, such as HNS_DSAF > > +config HNS3 > + tristate "Hisilicon Network Subsystem Support HNS3 (Framework)" > + depends on PCI > + ---help--- > + This selects the framework support for Hisilicon Network Subsystem 3. > + This layer facilitates clients like ENET, RoCE and user-space ethernet > + drivers(like ODP)to register with HNAE devices and their associated > + operations. > + > +config HNS3_HCLGE > + tristate "Hisilicon HNS3 HCLGE Acceleration Engine & Compatibility Layer Support" > + depends on PCI_MSI > + select HNS3 IMHO it should be "depends" and not "select". > + ---help--- > + This selects the HNS3_HCLGE network acceleration engine & its hardware > + compatibility layer. The engine would be used in Hisilicon hip08 family of > + SoCs and further upcoming SoCs. > + > +config HNS3_ENET > + tristate "Hisilicon HNS3 Ethernet Device Support" > + depends on 64BIT && PCI > + select HNS3 Ditto > + ---help--- > + This selects the Ethernet Driver for Hisilicon Network Subsystem 3 for hip08 > + family of SoCs. This module depends upon HNAE3 driver to access the HNAE3 > + devices and their associated operations. > + > endif # NET_VENDOR_HISILICON > diff --git a/drivers/net/ethernet/hisilicon/Makefile b/drivers/net/ethernet/hisilicon/Makefile > index 8661695024dc..3828c435c18f 100644 > --- a/drivers/net/ethernet/hisilicon/Makefile > +++ b/drivers/net/ethernet/hisilicon/Makefile > @@ -6,4 +6,5 @@ obj-$(CONFIG_HIX5HD2_GMAC) += hix5hd2_gmac.o > obj-$(CONFIG_HIP04_ETH) += hip04_eth.o > obj-$(CONFIG_HNS_MDIO) += hns_mdio.o > obj-$(CONFIG_HNS) += hns/ > +obj-$(CONFIG_HNS3) += hns3/ > obj-$(CONFIG_HISI_FEMAC) += hisi_femac.o > diff --git a/drivers/net/ethernet/hisilicon/hns3/Makefile b/drivers/net/ethernet/hisilicon/hns3/Makefile > new file mode 100644 > index 000000000000..5e53735b2d4e > --- /dev/null > +++ b/drivers/net/ethernet/hisilicon/hns3/Makefile > @@ -0,0 +1,7 @@ > +# > +# Makefile for the HISILICON network device drivers. > +# > + > +obj-$(CONFIG_HNS3) += hns3pf/ > + > +obj-$(CONFIG_HNS3) +=hnae3.o There is a missing space after "+=" > diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile b/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile > new file mode 100644 > index 000000000000..c0a92b5690a9 > --- /dev/null > +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile > @@ -0,0 +1,11 @@ > +# > +# Makefile for the HISILICON network device drivers. > +# > + > +ccflags-y := -Idrivers/net/ethernet/hisilicon/hns3 > + > +obj-$(CONFIG_HNS3_HCLGE) += hclge.o > +hclge-objs =hclge_main.o hclge_cmd.o hclge_mdio.o hclge_tm.o Missing space. > + > +obj-$(CONFIG_HNS3_ENET) += hns3.o > +hns3-objs = hns3_enet.o hns3_ethtool.o > -- > 2.11.0 > >
Hi Leon, > -----Original Message----- > From: linux-rdma-owner@vger.kernel.org [mailto:linux-rdma- > owner@vger.kernel.org] On Behalf Of Leon Romanovsky > Sent: Sunday, July 23, 2017 2:12 PM > To: Salil Mehta > Cc: davem@davemloft.net; Zhuangyuzeng (Yisen); huangdaode; lipeng (Y); > mehta.salil.lnk@gmail.com; netdev@vger.kernel.org; linux- > kernel@vger.kernel.org; linux-rdma@vger.kernel.org; Linuxarm > Subject: Re: [PATCH V4 net-next 8/8] net: hns3: Add HNS3 driver to > kernel build framework & MAINTAINERS > > On Sat, Jul 22, 2017 at 11:09:42PM +0100, Salil Mehta wrote: > > This patch updates the MAINTAINERS file with HNS3 Ethernet driver > > maintainers names and other details. This also introduces the new > > Makefiles required to build the HNS3 Ethernet driver and updates > > the existing Kconfig file in the hisilicon folder. > > > > Signed-off-by: Salil Mehta <salil.mehta@huawei.com> > > --- > > Patch V3: Addressed below errors: > > 1. Intel kbuild: https://lkml.org/lkml/2017/6/14/313 > > 2. Intel Kbuild: https://lkml.org/lkml/2017/6/14/636 > > Patch V2: No change > > Patch V1: Initial Submit > > --- > > MAINTAINERS | 8 +++++++ > > drivers/net/ethernet/hisilicon/Kconfig | 27 > ++++++++++++++++++++++ > > drivers/net/ethernet/hisilicon/Makefile | 1 + > > drivers/net/ethernet/hisilicon/hns3/Makefile | 7 ++++++ > > .../net/ethernet/hisilicon/hns3/hns3pf/Makefile | 11 +++++++++ > > 5 files changed, 54 insertions(+) > > create mode 100644 drivers/net/ethernet/hisilicon/hns3/Makefile > > create mode 100644 > drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > index 297e610c9163..a22d5b86c2b7 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -6197,6 +6197,14 @@ S: Maintained > > F: drivers/net/ethernet/hisilicon/ > > F: Documentation/devicetree/bindings/net/hisilicon*.txt > > > > +HISILICON NETWORK SUBSYSTEM 3 DRIVER (HNS3) > > +M: Yisen Zhuang <yisen.zhuang@huawei.com> > > +M: Salil Mehta <salil.mehta@huawei.com> > > +L: netdev@vger.kernel.org > > +W: http://www.hisilicon.com > > +S: Maintained > > +F: drivers/net/ethernet/hisilicon/hns3/ > > + > > HISILICON ROCE DRIVER > > M: Lijun Ou <oulijun@huawei.com> > > M: Wei Hu(Xavier) <xavier.huwei@huawei.com> > > diff --git a/drivers/net/ethernet/hisilicon/Kconfig > b/drivers/net/ethernet/hisilicon/Kconfig > > index d11287e11371..9f8ea283c531 100644 > > --- a/drivers/net/ethernet/hisilicon/Kconfig > > +++ b/drivers/net/ethernet/hisilicon/Kconfig > > @@ -76,4 +76,31 @@ config HNS_ENET > > This selects the general ethernet driver for HNS. This module > make > > use of any HNS AE driver, such as HNS_DSAF > > > > +config HNS3 > > + tristate "Hisilicon Network Subsystem Support HNS3 (Framework)" > > + depends on PCI > > + ---help--- > > + This selects the framework support for Hisilicon Network > Subsystem 3. > > + This layer facilitates clients like ENET, RoCE and user-space > ethernet > > + drivers(like ODP)to register with HNAE devices and their > associated > > + operations. > > + > > +config HNS3_HCLGE > > + tristate "Hisilicon HNS3 HCLGE Acceleration Engine & > Compatibility Layer Support" > > + depends on PCI_MSI > > + select HNS3 > > IMHO it should be "depends" and not "select". Agreed, will fix in next patch. Thanks > > > + ---help--- > > + This selects the HNS3_HCLGE network acceleration engine & its > hardware > > + compatibility layer. The engine would be used in Hisilicon > hip08 family of > > + SoCs and further upcoming SoCs. > > + > > +config HNS3_ENET > > + tristate "Hisilicon HNS3 Ethernet Device Support" > > + depends on 64BIT && PCI > > + select HNS3 > > Ditto Agreed, will fix in next patch. Thanks > > + ---help--- > > + This selects the Ethernet Driver for Hisilicon Network > Subsystem 3 for hip08 > > + family of SoCs. This module depends upon HNAE3 driver to access > the HNAE3 > > + devices and their associated operations. > > + > > endif # NET_VENDOR_HISILICON > > diff --git a/drivers/net/ethernet/hisilicon/Makefile > b/drivers/net/ethernet/hisilicon/Makefile > > index 8661695024dc..3828c435c18f 100644 > > --- a/drivers/net/ethernet/hisilicon/Makefile > > +++ b/drivers/net/ethernet/hisilicon/Makefile > > @@ -6,4 +6,5 @@ obj-$(CONFIG_HIX5HD2_GMAC) += hix5hd2_gmac.o > > obj-$(CONFIG_HIP04_ETH) += hip04_eth.o > > obj-$(CONFIG_HNS_MDIO) += hns_mdio.o > > obj-$(CONFIG_HNS) += hns/ > > +obj-$(CONFIG_HNS3) += hns3/ > > obj-$(CONFIG_HISI_FEMAC) += hisi_femac.o > > diff --git a/drivers/net/ethernet/hisilicon/hns3/Makefile > b/drivers/net/ethernet/hisilicon/hns3/Makefile > > new file mode 100644 > > index 000000000000..5e53735b2d4e > > --- /dev/null > > +++ b/drivers/net/ethernet/hisilicon/hns3/Makefile > > @@ -0,0 +1,7 @@ > > +# > > +# Makefile for the HISILICON network device drivers. > > +# > > + > > +obj-$(CONFIG_HNS3) += hns3pf/ > > + > > +obj-$(CONFIG_HNS3) +=hnae3.o > > There is a missing space after "+=" Will fix. thanks. > > > diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile > b/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile > > new file mode 100644 > > index 000000000000..c0a92b5690a9 > > --- /dev/null > > +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile > > @@ -0,0 +1,11 @@ > > +# > > +# Makefile for the HISILICON network device drivers. > > +# > > + > > +ccflags-y := -Idrivers/net/ethernet/hisilicon/hns3 > > + > > +obj-$(CONFIG_HNS3_HCLGE) += hclge.o > > +hclge-objs =hclge_main.o hclge_cmd.o hclge_mdio.o hclge_tm.o > > Missing space. Okay. Will fix. Thanks > > > + > > +obj-$(CONFIG_HNS3_ENET) += hns3.o > > +hns3-objs = hns3_enet.o hns3_ethtool.o > > -- > > 2.11.0 > > > > -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/MAINTAINERS b/MAINTAINERS index 297e610c9163..a22d5b86c2b7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6197,6 +6197,14 @@ S: Maintained F: drivers/net/ethernet/hisilicon/ F: Documentation/devicetree/bindings/net/hisilicon*.txt +HISILICON NETWORK SUBSYSTEM 3 DRIVER (HNS3) +M: Yisen Zhuang <yisen.zhuang@huawei.com> +M: Salil Mehta <salil.mehta@huawei.com> +L: netdev@vger.kernel.org +W: http://www.hisilicon.com +S: Maintained +F: drivers/net/ethernet/hisilicon/hns3/ + HISILICON ROCE DRIVER M: Lijun Ou <oulijun@huawei.com> M: Wei Hu(Xavier) <xavier.huwei@huawei.com> diff --git a/drivers/net/ethernet/hisilicon/Kconfig b/drivers/net/ethernet/hisilicon/Kconfig index d11287e11371..9f8ea283c531 100644 --- a/drivers/net/ethernet/hisilicon/Kconfig +++ b/drivers/net/ethernet/hisilicon/Kconfig @@ -76,4 +76,31 @@ config HNS_ENET This selects the general ethernet driver for HNS. This module make use of any HNS AE driver, such as HNS_DSAF +config HNS3 + tristate "Hisilicon Network Subsystem Support HNS3 (Framework)" + depends on PCI + ---help--- + This selects the framework support for Hisilicon Network Subsystem 3. + This layer facilitates clients like ENET, RoCE and user-space ethernet + drivers(like ODP)to register with HNAE devices and their associated + operations. + +config HNS3_HCLGE + tristate "Hisilicon HNS3 HCLGE Acceleration Engine & Compatibility Layer Support" + depends on PCI_MSI + select HNS3 + ---help--- + This selects the HNS3_HCLGE network acceleration engine & its hardware + compatibility layer. The engine would be used in Hisilicon hip08 family of + SoCs and further upcoming SoCs. + +config HNS3_ENET + tristate "Hisilicon HNS3 Ethernet Device Support" + depends on 64BIT && PCI + select HNS3 + ---help--- + This selects the Ethernet Driver for Hisilicon Network Subsystem 3 for hip08 + family of SoCs. This module depends upon HNAE3 driver to access the HNAE3 + devices and their associated operations. + endif # NET_VENDOR_HISILICON diff --git a/drivers/net/ethernet/hisilicon/Makefile b/drivers/net/ethernet/hisilicon/Makefile index 8661695024dc..3828c435c18f 100644 --- a/drivers/net/ethernet/hisilicon/Makefile +++ b/drivers/net/ethernet/hisilicon/Makefile @@ -6,4 +6,5 @@ obj-$(CONFIG_HIX5HD2_GMAC) += hix5hd2_gmac.o obj-$(CONFIG_HIP04_ETH) += hip04_eth.o obj-$(CONFIG_HNS_MDIO) += hns_mdio.o obj-$(CONFIG_HNS) += hns/ +obj-$(CONFIG_HNS3) += hns3/ obj-$(CONFIG_HISI_FEMAC) += hisi_femac.o diff --git a/drivers/net/ethernet/hisilicon/hns3/Makefile b/drivers/net/ethernet/hisilicon/hns3/Makefile new file mode 100644 index 000000000000..5e53735b2d4e --- /dev/null +++ b/drivers/net/ethernet/hisilicon/hns3/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for the HISILICON network device drivers. +# + +obj-$(CONFIG_HNS3) += hns3pf/ + +obj-$(CONFIG_HNS3) +=hnae3.o diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile b/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile new file mode 100644 index 000000000000..c0a92b5690a9 --- /dev/null +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for the HISILICON network device drivers. +# + +ccflags-y := -Idrivers/net/ethernet/hisilicon/hns3 + +obj-$(CONFIG_HNS3_HCLGE) += hclge.o +hclge-objs =hclge_main.o hclge_cmd.o hclge_mdio.o hclge_tm.o + +obj-$(CONFIG_HNS3_ENET) += hns3.o +hns3-objs = hns3_enet.o hns3_ethtool.o
This patch updates the MAINTAINERS file with HNS3 Ethernet driver maintainers names and other details. This also introduces the new Makefiles required to build the HNS3 Ethernet driver and updates the existing Kconfig file in the hisilicon folder. Signed-off-by: Salil Mehta <salil.mehta@huawei.com> --- Patch V3: Addressed below errors: 1. Intel kbuild: https://lkml.org/lkml/2017/6/14/313 2. Intel Kbuild: https://lkml.org/lkml/2017/6/14/636 Patch V2: No change Patch V1: Initial Submit --- MAINTAINERS | 8 +++++++ drivers/net/ethernet/hisilicon/Kconfig | 27 ++++++++++++++++++++++ drivers/net/ethernet/hisilicon/Makefile | 1 + drivers/net/ethernet/hisilicon/hns3/Makefile | 7 ++++++ .../net/ethernet/hisilicon/hns3/hns3pf/Makefile | 11 +++++++++ 5 files changed, 54 insertions(+) create mode 100644 drivers/net/ethernet/hisilicon/hns3/Makefile create mode 100644 drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile