diff mbox series

[15/30] RDMA/hw/hfi1/chip: Fix a bunch of kernel-doc formatting and spelling issues

Message ID 20210121094519.2044049-16-lee.jones@linaro.org (mailing list archive)
State Superseded
Delegated to: Jason Gunthorpe
Headers show
Series Rid W=1 warnings from Infiniband | expand

Commit Message

Lee Jones Jan. 21, 2021, 9:45 a.m. UTC
Fixes the following W=1 kernel build warning(s):

 drivers/infiniband/hw/hfi1/chip.c:1335: warning: Function parameter or member 'dd' not described in 'hfi1_addr_from_offset'
 drivers/infiniband/hw/hfi1/chip.c:1335: warning: Function parameter or member 'offset' not described in 'hfi1_addr_from_offset'
 drivers/infiniband/hw/hfi1/chip.c:1350: warning: Function parameter or member 'dd' not described in 'read_csr'
 drivers/infiniband/hw/hfi1/chip.c:1350: warning: Function parameter or member 'offset' not described in 'read_csr'
 drivers/infiniband/hw/hfi1/chip.c:1363: warning: Function parameter or member 'dd' not described in 'write_csr'
 drivers/infiniband/hw/hfi1/chip.c:1363: warning: Function parameter or member 'offset' not described in 'write_csr'
 drivers/infiniband/hw/hfi1/chip.c:1363: warning: Function parameter or member 'value' not described in 'write_csr'
 drivers/infiniband/hw/hfi1/chip.c:1385: warning: Function parameter or member 'dd' not described in 'get_csr_addr'
 drivers/infiniband/hw/hfi1/chip.c:1385: warning: Function parameter or member 'offset' not described in 'get_csr_addr'
 drivers/infiniband/hw/hfi1/chip.c:8442: warning: Function parameter or member 'rcd' not described in 'receive_interrupt_common'
 drivers/infiniband/hw/hfi1/chip.c:8491: warning: Function parameter or member 'napi' not described in 'hfi1_netdev_rx_napi'
 drivers/infiniband/hw/hfi1/chip.c:8491: warning: Function parameter or member 'budget' not described in 'hfi1_netdev_rx_napi'
 drivers/infiniband/hw/hfi1/chip.c:14221: warning: Function parameter or member 'dd' not described in 'init_qpmap_table'
 drivers/infiniband/hw/hfi1/chip.c:14221: warning: Function parameter or member 'first_ctxt' not described in 'init_qpmap_table'
 drivers/infiniband/hw/hfi1/chip.c:14221: warning: Function parameter or member 'last_ctxt' not described in 'init_qpmap_table'
 drivers/infiniband/hw/hfi1/chip.c:14399: warning: Function parameter or member 'dd' not described in 'init_qos'
 drivers/infiniband/hw/hfi1/chip.c:14399: warning: Function parameter or member 'rmt' not described in 'init_qos'
 drivers/infiniband/hw/hfi1/chip.c:15032: warning: Function parameter or member 'dd' not described in 'hfi1_init_dd'
 drivers/infiniband/hw/hfi1/chip.c:15032: warning: Excess function parameter 'dev' description in 'hfi1_init_dd'
 drivers/infiniband/hw/hfi1/chip.c:15032: warning: Excess function parameter 'ent' description in 'hfi1_init_dd'
 drivers/infiniband/hw/hfi1/chip.c:15395: warning: Function parameter or member 'ppd' not described in 'create_pbc'
 drivers/infiniband/hw/hfi1/chip.c:15395: warning: Function parameter or member 'srate_mbs' not described in 'create_pbc'
 drivers/infiniband/hw/hfi1/chip.c:15395: warning: Function parameter or member 'dw_len' not described in 'create_pbc'
 drivers/infiniband/hw/hfi1/chip.c:15395: warning: Excess function parameter 'srate' description in 'create_pbc'
 drivers/infiniband/hw/hfi1/chip.c:15395: warning: Excess function parameter 'dwlen' description in 'create_pbc'

Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/infiniband/hw/hfi1/chip.c | 46 +++++++++++++++----------------
 1 file changed, 23 insertions(+), 23 deletions(-)
diff mbox series

Patch

diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c
index c87b94ea29397..993cbf37e0b9e 100644
--- a/drivers/infiniband/hw/hfi1/chip.c
+++ b/drivers/infiniband/hw/hfi1/chip.c
@@ -1323,8 +1323,8 @@  CNTR_ELEM(#name, \
 
 /**
  * hfi_addr_from_offset - return addr for readq/writeq
- * @dd - the dd device
- * @offset - the offset of the CSR within bar0
+ * @dd: the dd device
+ * @offset: the offset of the CSR within bar0
  *
  * This routine selects the appropriate base address
  * based on the indicated offset.
@@ -1340,8 +1340,8 @@  static inline void __iomem *hfi1_addr_from_offset(
 
 /**
  * read_csr - read CSR at the indicated offset
- * @dd - the dd device
- * @offset - the offset of the CSR within bar0
+ * @dd: the dd device
+ * @offset: the offset of the CSR within bar0
  *
  * Return: the value read or all FF's if there
  * is no mapping
@@ -1355,9 +1355,9 @@  u64 read_csr(const struct hfi1_devdata *dd, u32 offset)
 
 /**
  * write_csr - write CSR at the indicated offset
- * @dd - the dd device
- * @offset - the offset of the CSR within bar0
- * @value - value to write
+ * @dd: the dd device
+ * @offset: the offset of the CSR within bar0
+ * @value: value to write
  */
 void write_csr(const struct hfi1_devdata *dd, u32 offset, u64 value)
 {
@@ -1373,8 +1373,8 @@  void write_csr(const struct hfi1_devdata *dd, u32 offset, u64 value)
 
 /**
  * get_csr_addr - return te iomem address for offset
- * @dd - the dd device
- * @offset - the offset of the CSR within bar0
+ * @dd: the dd device
+ * @offset: the offset of the CSR within bar0
  *
  * Return: The iomem address to use in subsequent
  * writeq/readq operations.
@@ -8433,7 +8433,7 @@  static inline int check_packet_present(struct hfi1_ctxtdata *rcd)
 	return hfi1_rcd_head(rcd) != tail;
 }
 
-/**
+/*
  * Common code for receive contexts interrupt handlers.
  * Update traces, increment kernel IRQ counter and
  * setup ASPM when needed.
@@ -8447,7 +8447,7 @@  static void receive_interrupt_common(struct hfi1_ctxtdata *rcd)
 	aspm_ctx_disable(rcd);
 }
 
-/**
+/*
  * __hfi1_rcd_eoi_intr() - Make HW issue receive interrupt
  * when there are packets present in the queue. When calling
  * with interrupts enabled please use hfi1_rcd_eoi_intr.
@@ -8484,8 +8484,8 @@  static void hfi1_rcd_eoi_intr(struct hfi1_ctxtdata *rcd)
 
 /**
  * hfi1_netdev_rx_napi - napi poll function to move eoi inline
- * @napi - pointer to napi object
- * @budget - netdev budget
+ * @napi: pointer to napi object
+ * @budget: netdev budget
  */
 int hfi1_netdev_rx_napi(struct napi_struct *napi, int budget)
 {
@@ -10142,7 +10142,7 @@  u32 lrh_max_header_bytes(struct hfi1_devdata *dd)
 
 /*
  * Set Send Length
- * @ppd - per port data
+ * @ppd: per port data
  *
  * Set the MTU by limiting how many DWs may be sent.  The SendLenCheck*
  * registers compare against LRH.PktLen, so use the max bytes included
@@ -14200,9 +14200,9 @@  u8 hfi1_get_qp_map(struct hfi1_devdata *dd, u8 idx)
 
 /**
  * init_qpmap_table
- * @dd - device data
- * @first_ctxt - first context
- * @last_ctxt - first context
+ * @dd: device data
+ * @first_ctxt: first context
+ * @last_ctxt: first context
  *
  * This return sets the qpn mapping table that
  * is indexed by qpn[8:1].
@@ -14383,8 +14383,8 @@  static int qos_rmt_entries(struct hfi1_devdata *dd, unsigned int *mp,
 
 /**
  * init_qos - init RX qos
- * @dd - device data
- * @rmt - RSM map table
+ * @dd: device data
+ * @rmt: RSM map table
  *
  * This routine initializes Rule 0 and the RSM map table to implement
  * quality of service (qos).
@@ -15022,8 +15022,7 @@  static int check_int_registers(struct hfi1_devdata *dd)
 
 /**
  * hfi1_init_dd() - Initialize most of the dd structure.
- * @dev: the pci_dev for hfi1_ib device
- * @ent: pci_device_id struct for this dev
+ * @dd: the dd device
  *
  * This is global, and is called directly at init to set up the
  * chip-specific function pointers for later use.
@@ -15378,10 +15377,11 @@  static u16 delay_cycles(struct hfi1_pportdata *ppd, u32 desired_egress_rate,
 
 /**
  * create_pbc - build a pbc for transmission
+ * @ppd: info of physical Hfi port
  * @flags: special case flags or-ed in built pbc
- * @srate: static rate
+ * @srate_mbs: static rate
  * @vl: vl
- * @dwlen: dword length (header words + data words + pbc words)
+ * @dw_len: dword length (header words + data words + pbc words)
  *
  * Create a PBC with the given flags, rate, VL, and length.
  *