| Message ID | 20240205-mlx5-codespell-v1-1-63b86dffbb61@kernel.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | [net-nex] mlx4: Address spelling errors | expand |
On 05/02/2024 13:51, Simon Horman wrote: > Address spelling errors flagged by codespell. > > This patch follows-up on an earlier patch by Colin Ian King, > which addressed a spelling error in a user-visible log message [1]. > This patch includes that change. > > [1] https://lore.kernel.org/netdev/20231209225135.4055334-1-colin.i.king@gmail.com/ > > This patch is intended to cover all files under > drivers/net/ethernet/mellanox/mlx4 > > Signed-off-by: Simon Horman <horms@kernel.org> > --- > drivers/net/ethernet/mellanox/mlx4/cmd.c | 7 ++++--- > drivers/net/ethernet/mellanox/mlx4/cq.c | 4 ++-- > drivers/net/ethernet/mellanox/mlx4/en_clock.c | 4 ++-- > drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 5 +++-- > drivers/net/ethernet/mellanox/mlx4/en_rx.c | 2 +- > drivers/net/ethernet/mellanox/mlx4/en_tx.c | 2 +- > drivers/net/ethernet/mellanox/mlx4/eq.c | 2 +- > drivers/net/ethernet/mellanox/mlx4/fw_qos.h | 8 ++++---- > drivers/net/ethernet/mellanox/mlx4/main.c | 4 ++-- > drivers/net/ethernet/mellanox/mlx4/mlx4_stats.h | 2 +- > drivers/net/ethernet/mellanox/mlx4/port.c | 2 +- > 11 files changed, 22 insertions(+), 20 deletions(-) > > diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c > index f5b1f8c7834f..7f20813456e2 100644 > --- a/drivers/net/ethernet/mellanox/mlx4/cmd.c > +++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c > @@ -2199,8 +2199,9 @@ static void mlx4_master_do_cmd(struct mlx4_dev *dev, int slave, u8 cmd, > if (cmd != MLX4_COMM_CMD_RESET) { > mlx4_warn(dev, "Turn on internal error to force reset, slave=%d, cmd=0x%x\n", > slave, cmd); > - /* Turn on internal error letting slave reset itself immeditaly, > - * otherwise it might take till timeout on command is passed > + /* Turn on internal error letting slave reset itself > + * immediately, otherwise it might take till timeout on > + * command is passed > */ > reply |= ((u32)COMM_CHAN_EVENT_INTERNAL_ERR); > } > @@ -2954,7 +2955,7 @@ static bool mlx4_valid_vf_state_change(struct mlx4_dev *dev, int port, > dummy_admin.default_vlan = vlan; > > /* VF wants to move to other VST state which is valid with current > - * rate limit. Either differnt default vlan in VST or other > + * rate limit. Either different default vlan in VST or other > * supported QoS priority. Otherwise we don't allow this change when > * the TX rate is still configured. > */ > diff --git a/drivers/net/ethernet/mellanox/mlx4/cq.c b/drivers/net/ethernet/mellanox/mlx4/cq.c > index 4d4f9cf9facb..e130e7259275 100644 > --- a/drivers/net/ethernet/mellanox/mlx4/cq.c > +++ b/drivers/net/ethernet/mellanox/mlx4/cq.c > @@ -115,7 +115,7 @@ void mlx4_cq_completion(struct mlx4_dev *dev, u32 cqn) > return; > } > > - /* Acessing the CQ outside of rcu_read_lock is safe, because > + /* Accessing the CQ outside of rcu_read_lock is safe, because > * the CQ is freed only after interrupt handling is completed. > */ > ++cq->arm_sn; > @@ -137,7 +137,7 @@ void mlx4_cq_event(struct mlx4_dev *dev, u32 cqn, int event_type) > return; > } > > - /* Acessing the CQ outside of rcu_read_lock is safe, because > + /* Accessing the CQ outside of rcu_read_lock is safe, because > * the CQ is freed only after interrupt handling is completed. > */ > cq->event(cq, event_type); > diff --git a/drivers/net/ethernet/mellanox/mlx4/en_clock.c b/drivers/net/ethernet/mellanox/mlx4/en_clock.c > index 9e3b76182088..cd754cd76bde 100644 > --- a/drivers/net/ethernet/mellanox/mlx4/en_clock.c > +++ b/drivers/net/ethernet/mellanox/mlx4/en_clock.c > @@ -96,8 +96,8 @@ void mlx4_en_remove_timestamp(struct mlx4_en_dev *mdev) > > #define MLX4_EN_WRAP_AROUND_SEC 10UL > /* By scheduling the overflow check every 5 seconds, we have a reasonably > - * good chance we wont miss a wrap around. > - * TOTO: Use a timer instead of a work queue to increase the guarantee. > + * good chance we won't miss a wrap around. > + * TODO: Use a timer instead of a work queue to increase the guarantee. > */ > #define MLX4_EN_OVERFLOW_PERIOD (MLX4_EN_WRAP_AROUND_SEC * HZ / 2) > > diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c > index 33bbcced8105..d7da62cda821 100644 > --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c > +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c > @@ -1072,7 +1072,8 @@ static void mlx4_en_do_multicast(struct mlx4_en_priv *priv, > 1, MLX4_MCAST_CONFIG); > > /* Update multicast list - we cache all addresses so they won't > - * change while HW is updated holding the command semaphor */ > + * change while HW is updated holding the command semaphore > + */ > netif_addr_lock_bh(dev); > mlx4_en_cache_mclist(dev); > netif_addr_unlock_bh(dev); > @@ -1817,7 +1818,7 @@ int mlx4_en_start_port(struct net_device *dev) > mlx4_en_set_rss_steer_rules(priv)) > mlx4_warn(mdev, "Failed setting steering rules\n"); > > - /* Attach rx QP to bradcast address */ > + /* Attach rx QP to broadcast address */ > eth_broadcast_addr(&mc_list[10]); > mc_list[5] = priv->port; /* needed for B0 steering support */ > if (mlx4_multicast_attach(mdev->dev, priv->rss_map.indir_qp, mc_list, > diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c > index a09b6e05337d..eac49657bd07 100644 > --- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c > +++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c > @@ -762,7 +762,7 @@ int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int bud > /* Drop packet on bad receive or bad checksum */ > if (unlikely((cqe->owner_sr_opcode & MLX4_CQE_OPCODE_MASK) == > MLX4_CQE_OPCODE_ERROR)) { > - en_err(priv, "CQE completed in error - vendor syndrom:%d syndrom:%d\n", > + en_err(priv, "CQE completed in error - vendor syndrome:%d syndrome:%d\n", > ((struct mlx4_err_cqe *)cqe)->vendor_err_syndrome, > ((struct mlx4_err_cqe *)cqe)->syndrome); > goto next; > diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c > index 65cb63f6c465..1ddb11cb25f9 100644 > --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c > +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c > @@ -992,7 +992,7 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev) > tx_info->ts_requested = 1; > } > > - /* Prepare ctrl segement apart opcode+ownership, which depends on > + /* Prepare ctrl segment apart opcode+ownership, which depends on > * whether LSO is used */ > tx_desc->ctrl.srcrb_flags = priv->ctrl_flags; > if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) { > diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c > index 6598b10a9ff4..9572a45f6143 100644 > --- a/drivers/net/ethernet/mellanox/mlx4/eq.c > +++ b/drivers/net/ethernet/mellanox/mlx4/eq.c > @@ -210,7 +210,7 @@ static void slave_event(struct mlx4_dev *dev, u8 slave, struct mlx4_eqe *eqe) > > memcpy(s_eqe, eqe, sizeof(struct mlx4_eqe) - 1); > s_eqe->slave_id = slave; > - /* ensure all information is written before setting the ownersip bit */ > + /* ensure all information is written before setting the ownership bit */ > dma_wmb(); > s_eqe->owner = !!(slave_eq->prod & SLAVE_EVENT_EQ_SIZE) ? 0x0 : 0x80; > ++slave_eq->prod; > diff --git a/drivers/net/ethernet/mellanox/mlx4/fw_qos.h b/drivers/net/ethernet/mellanox/mlx4/fw_qos.h > index 954b86faac29..40ca29bb928c 100644 > --- a/drivers/net/ethernet/mellanox/mlx4/fw_qos.h > +++ b/drivers/net/ethernet/mellanox/mlx4/fw_qos.h > @@ -44,7 +44,7 @@ > /* Default supported priorities for VPP allocation */ > #define MLX4_DEFAULT_QOS_PRIO (0) > > -/* Derived from FW feature definition, 0 is the default vport fo all QPs */ > +/* Derived from FW feature definition, 0 is the default vport for all QPs */ > #define MLX4_VPP_DEFAULT_VPORT (0) > > struct mlx4_vport_qos_param { > @@ -98,7 +98,7 @@ int mlx4_SET_PORT_SCHEDULER(struct mlx4_dev *dev, u8 port, u8 *tc_tx_bw, > int mlx4_ALLOCATE_VPP_get(struct mlx4_dev *dev, u8 port, > u16 *available_vpp, u8 *vpp_p_up); > /** > - * mlx4_ALLOCATE_VPP_set - Distribution of VPPs among differnt priorities. > + * mlx4_ALLOCATE_VPP_set - Distribution of VPPs among different priorities. > * The total number of VPPs assigned to all for a port must not exceed > * the value reported by available_vpp in mlx4_ALLOCATE_VPP_get. > * VPP allocation is allowed only after the port type has been set, > @@ -113,7 +113,7 @@ int mlx4_ALLOCATE_VPP_get(struct mlx4_dev *dev, u8 port, > int mlx4_ALLOCATE_VPP_set(struct mlx4_dev *dev, u8 port, u8 *vpp_p_up); > > /** > - * mlx4_SET_VPORT_QOS_get - Query QoS proporties of a Vport. > + * mlx4_SET_VPORT_QOS_get - Query QoS properties of a Vport. > * Each priority allowed for the Vport is assigned with a share of the BW, > * and a BW limitation. This commands query the current QoS values. > * > @@ -128,7 +128,7 @@ int mlx4_SET_VPORT_QOS_get(struct mlx4_dev *dev, u8 port, u8 vport, > struct mlx4_vport_qos_param *out_param); > > /** > - * mlx4_SET_VPORT_QOS_set - Set QoS proporties of a Vport. > + * mlx4_SET_VPORT_QOS_set - Set QoS properties of a Vport. > * QoS parameters can be modified at any time, but must be initialized > * before any QP is associated with the VPort. > * > diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c > index 2581226836b5..7b02ff61126d 100644 > --- a/drivers/net/ethernet/mellanox/mlx4/main.c > +++ b/drivers/net/ethernet/mellanox/mlx4/main.c > @@ -129,7 +129,7 @@ static const struct mlx4_profile default_profile = { > .num_cq = 1 << 16, > .num_mcg = 1 << 13, > .num_mpt = 1 << 19, > - .num_mtt = 1 << 20, /* It is really num mtt segements */ > + .num_mtt = 1 << 20, /* It is really num mtt segments */ > }; > > static const struct mlx4_profile low_mem_profile = { > @@ -1508,7 +1508,7 @@ static int mlx4_port_map_set(struct mlx4_dev *dev, struct mlx4_port_map *v2p) > priv->v2p.port1 = port1; > priv->v2p.port2 = port2; > } else { > - mlx4_err(dev, "Failed to change port mape: %d\n", err); > + mlx4_err(dev, "Failed to change port map: %d\n", err); > } > } > > diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_stats.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_stats.h > index e9cd4bb6f83d..d3d9ec042d2c 100644 > --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_stats.h > +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_stats.h > @@ -112,7 +112,7 @@ struct mlx4_en_stat_out_flow_control_mbox { > __be64 tx_pause_duration; > /* Number of transmitter transitions from XOFF state to XON state */ > __be64 tx_pause_transition; > - /* Reserverd */ > + /* Reserved */ > __be64 reserved[2]; > }; > > diff --git a/drivers/net/ethernet/mellanox/mlx4/port.c b/drivers/net/ethernet/mellanox/mlx4/port.c > index 256a06b3c096..4e43f4a7d246 100644 > --- a/drivers/net/ethernet/mellanox/mlx4/port.c > +++ b/drivers/net/ethernet/mellanox/mlx4/port.c > @@ -2118,7 +2118,7 @@ static void mlx4_qsfp_eeprom_params_set(u8 *i2c_addr, u8 *page_num, u16 *offset) > * @data: output buffer to put the requested data into. > * > * Reads cable module eeprom data, puts the outcome data into > - * data pointer paramer. > + * data pointer parameter. > * Returns num of read bytes on success or a negative error > * code. > */ > > Thanks for your patch. Reviewed-by: Tariq Toukan <tariqt@nvidia.com> I'm ignoring the branch name typo in the mail subject :) [PATCH net-nex]
Hi Simon, On 2/5/24 03:51, Simon Horman wrote: > Address spelling errors flagged by codespell. > > This patch follows-up on an earlier patch by Colin Ian King, > which addressed a spelling error in a user-visible log message [1]. > This patch includes that change. > > [1] https://lore.kernel.org/netdev/20231209225135.4055334-1-colin.i.king@gmail.com/ > > This patch is intended to cover all files under > drivers/net/ethernet/mellanox/mlx4 > > Signed-off-by: Simon Horman <horms@kernel.org> > --- > drivers/net/ethernet/mellanox/mlx4/cmd.c | 7 ++++--- > drivers/net/ethernet/mellanox/mlx4/cq.c | 4 ++-- > drivers/net/ethernet/mellanox/mlx4/en_clock.c | 4 ++-- > drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 5 +++-- > drivers/net/ethernet/mellanox/mlx4/en_rx.c | 2 +- > drivers/net/ethernet/mellanox/mlx4/en_tx.c | 2 +- > drivers/net/ethernet/mellanox/mlx4/eq.c | 2 +- > drivers/net/ethernet/mellanox/mlx4/fw_qos.h | 8 ++++---- > drivers/net/ethernet/mellanox/mlx4/main.c | 4 ++-- > drivers/net/ethernet/mellanox/mlx4/mlx4_stats.h | 2 +- > drivers/net/ethernet/mellanox/mlx4/port.c | 2 +- > 11 files changed, 22 insertions(+), 20 deletions(-) > Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Thanks.
Hello: This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <kuba@kernel.org>: On Mon, 05 Feb 2024 11:51:57 +0000 you wrote: > Address spelling errors flagged by codespell. > > This patch follows-up on an earlier patch by Colin Ian King, > which addressed a spelling error in a user-visible log message [1]. > This patch includes that change. > > [1] https://lore.kernel.org/netdev/20231209225135.4055334-1-colin.i.king@gmail.com/ > > [...] Here is the summary with links: - [net-nex] mlx4: Address spelling errors https://git.kernel.org/netdev/net-next/c/6cc9c6fbc79f You are awesome, thank you!
diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c index f5b1f8c7834f..7f20813456e2 100644 --- a/drivers/net/ethernet/mellanox/mlx4/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c @@ -2199,8 +2199,9 @@ static void mlx4_master_do_cmd(struct mlx4_dev *dev, int slave, u8 cmd, if (cmd != MLX4_COMM_CMD_RESET) { mlx4_warn(dev, "Turn on internal error to force reset, slave=%d, cmd=0x%x\n", slave, cmd); - /* Turn on internal error letting slave reset itself immeditaly, - * otherwise it might take till timeout on command is passed + /* Turn on internal error letting slave reset itself + * immediately, otherwise it might take till timeout on + * command is passed */ reply |= ((u32)COMM_CHAN_EVENT_INTERNAL_ERR); } @@ -2954,7 +2955,7 @@ static bool mlx4_valid_vf_state_change(struct mlx4_dev *dev, int port, dummy_admin.default_vlan = vlan; /* VF wants to move to other VST state which is valid with current - * rate limit. Either differnt default vlan in VST or other + * rate limit. Either different default vlan in VST or other * supported QoS priority. Otherwise we don't allow this change when * the TX rate is still configured. */ diff --git a/drivers/net/ethernet/mellanox/mlx4/cq.c b/drivers/net/ethernet/mellanox/mlx4/cq.c index 4d4f9cf9facb..e130e7259275 100644 --- a/drivers/net/ethernet/mellanox/mlx4/cq.c +++ b/drivers/net/ethernet/mellanox/mlx4/cq.c @@ -115,7 +115,7 @@ void mlx4_cq_completion(struct mlx4_dev *dev, u32 cqn) return; } - /* Acessing the CQ outside of rcu_read_lock is safe, because + /* Accessing the CQ outside of rcu_read_lock is safe, because * the CQ is freed only after interrupt handling is completed. */ ++cq->arm_sn; @@ -137,7 +137,7 @@ void mlx4_cq_event(struct mlx4_dev *dev, u32 cqn, int event_type) return; } - /* Acessing the CQ outside of rcu_read_lock is safe, because + /* Accessing the CQ outside of rcu_read_lock is safe, because * the CQ is freed only after interrupt handling is completed. */ cq->event(cq, event_type); diff --git a/drivers/net/ethernet/mellanox/mlx4/en_clock.c b/drivers/net/ethernet/mellanox/mlx4/en_clock.c index 9e3b76182088..cd754cd76bde 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_clock.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_clock.c @@ -96,8 +96,8 @@ void mlx4_en_remove_timestamp(struct mlx4_en_dev *mdev) #define MLX4_EN_WRAP_AROUND_SEC 10UL /* By scheduling the overflow check every 5 seconds, we have a reasonably - * good chance we wont miss a wrap around. - * TOTO: Use a timer instead of a work queue to increase the guarantee. + * good chance we won't miss a wrap around. + * TODO: Use a timer instead of a work queue to increase the guarantee. */ #define MLX4_EN_OVERFLOW_PERIOD (MLX4_EN_WRAP_AROUND_SEC * HZ / 2) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 33bbcced8105..d7da62cda821 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1072,7 +1072,8 @@ static void mlx4_en_do_multicast(struct mlx4_en_priv *priv, 1, MLX4_MCAST_CONFIG); /* Update multicast list - we cache all addresses so they won't - * change while HW is updated holding the command semaphor */ + * change while HW is updated holding the command semaphore + */ netif_addr_lock_bh(dev); mlx4_en_cache_mclist(dev); netif_addr_unlock_bh(dev); @@ -1817,7 +1818,7 @@ int mlx4_en_start_port(struct net_device *dev) mlx4_en_set_rss_steer_rules(priv)) mlx4_warn(mdev, "Failed setting steering rules\n"); - /* Attach rx QP to bradcast address */ + /* Attach rx QP to broadcast address */ eth_broadcast_addr(&mc_list[10]); mc_list[5] = priv->port; /* needed for B0 steering support */ if (mlx4_multicast_attach(mdev->dev, priv->rss_map.indir_qp, mc_list, diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c index a09b6e05337d..eac49657bd07 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c @@ -762,7 +762,7 @@ int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int bud /* Drop packet on bad receive or bad checksum */ if (unlikely((cqe->owner_sr_opcode & MLX4_CQE_OPCODE_MASK) == MLX4_CQE_OPCODE_ERROR)) { - en_err(priv, "CQE completed in error - vendor syndrom:%d syndrom:%d\n", + en_err(priv, "CQE completed in error - vendor syndrome:%d syndrome:%d\n", ((struct mlx4_err_cqe *)cqe)->vendor_err_syndrome, ((struct mlx4_err_cqe *)cqe)->syndrome); goto next; diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c index 65cb63f6c465..1ddb11cb25f9 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c @@ -992,7 +992,7 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev) tx_info->ts_requested = 1; } - /* Prepare ctrl segement apart opcode+ownership, which depends on + /* Prepare ctrl segment apart opcode+ownership, which depends on * whether LSO is used */ tx_desc->ctrl.srcrb_flags = priv->ctrl_flags; if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) { diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c index 6598b10a9ff4..9572a45f6143 100644 --- a/drivers/net/ethernet/mellanox/mlx4/eq.c +++ b/drivers/net/ethernet/mellanox/mlx4/eq.c @@ -210,7 +210,7 @@ static void slave_event(struct mlx4_dev *dev, u8 slave, struct mlx4_eqe *eqe) memcpy(s_eqe, eqe, sizeof(struct mlx4_eqe) - 1); s_eqe->slave_id = slave; - /* ensure all information is written before setting the ownersip bit */ + /* ensure all information is written before setting the ownership bit */ dma_wmb(); s_eqe->owner = !!(slave_eq->prod & SLAVE_EVENT_EQ_SIZE) ? 0x0 : 0x80; ++slave_eq->prod; diff --git a/drivers/net/ethernet/mellanox/mlx4/fw_qos.h b/drivers/net/ethernet/mellanox/mlx4/fw_qos.h index 954b86faac29..40ca29bb928c 100644 --- a/drivers/net/ethernet/mellanox/mlx4/fw_qos.h +++ b/drivers/net/ethernet/mellanox/mlx4/fw_qos.h @@ -44,7 +44,7 @@ /* Default supported priorities for VPP allocation */ #define MLX4_DEFAULT_QOS_PRIO (0) -/* Derived from FW feature definition, 0 is the default vport fo all QPs */ +/* Derived from FW feature definition, 0 is the default vport for all QPs */ #define MLX4_VPP_DEFAULT_VPORT (0) struct mlx4_vport_qos_param { @@ -98,7 +98,7 @@ int mlx4_SET_PORT_SCHEDULER(struct mlx4_dev *dev, u8 port, u8 *tc_tx_bw, int mlx4_ALLOCATE_VPP_get(struct mlx4_dev *dev, u8 port, u16 *available_vpp, u8 *vpp_p_up); /** - * mlx4_ALLOCATE_VPP_set - Distribution of VPPs among differnt priorities. + * mlx4_ALLOCATE_VPP_set - Distribution of VPPs among different priorities. * The total number of VPPs assigned to all for a port must not exceed * the value reported by available_vpp in mlx4_ALLOCATE_VPP_get. * VPP allocation is allowed only after the port type has been set, @@ -113,7 +113,7 @@ int mlx4_ALLOCATE_VPP_get(struct mlx4_dev *dev, u8 port, int mlx4_ALLOCATE_VPP_set(struct mlx4_dev *dev, u8 port, u8 *vpp_p_up); /** - * mlx4_SET_VPORT_QOS_get - Query QoS proporties of a Vport. + * mlx4_SET_VPORT_QOS_get - Query QoS properties of a Vport. * Each priority allowed for the Vport is assigned with a share of the BW, * and a BW limitation. This commands query the current QoS values. * @@ -128,7 +128,7 @@ int mlx4_SET_VPORT_QOS_get(struct mlx4_dev *dev, u8 port, u8 vport, struct mlx4_vport_qos_param *out_param); /** - * mlx4_SET_VPORT_QOS_set - Set QoS proporties of a Vport. + * mlx4_SET_VPORT_QOS_set - Set QoS properties of a Vport. * QoS parameters can be modified at any time, but must be initialized * before any QP is associated with the VPort. * diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 2581226836b5..7b02ff61126d 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -129,7 +129,7 @@ static const struct mlx4_profile default_profile = { .num_cq = 1 << 16, .num_mcg = 1 << 13, .num_mpt = 1 << 19, - .num_mtt = 1 << 20, /* It is really num mtt segements */ + .num_mtt = 1 << 20, /* It is really num mtt segments */ }; static const struct mlx4_profile low_mem_profile = { @@ -1508,7 +1508,7 @@ static int mlx4_port_map_set(struct mlx4_dev *dev, struct mlx4_port_map *v2p) priv->v2p.port1 = port1; priv->v2p.port2 = port2; } else { - mlx4_err(dev, "Failed to change port mape: %d\n", err); + mlx4_err(dev, "Failed to change port map: %d\n", err); } } diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_stats.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_stats.h index e9cd4bb6f83d..d3d9ec042d2c 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_stats.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_stats.h @@ -112,7 +112,7 @@ struct mlx4_en_stat_out_flow_control_mbox { __be64 tx_pause_duration; /* Number of transmitter transitions from XOFF state to XON state */ __be64 tx_pause_transition; - /* Reserverd */ + /* Reserved */ __be64 reserved[2]; }; diff --git a/drivers/net/ethernet/mellanox/mlx4/port.c b/drivers/net/ethernet/mellanox/mlx4/port.c index 256a06b3c096..4e43f4a7d246 100644 --- a/drivers/net/ethernet/mellanox/mlx4/port.c +++ b/drivers/net/ethernet/mellanox/mlx4/port.c @@ -2118,7 +2118,7 @@ static void mlx4_qsfp_eeprom_params_set(u8 *i2c_addr, u8 *page_num, u16 *offset) * @data: output buffer to put the requested data into. * * Reads cable module eeprom data, puts the outcome data into - * data pointer paramer. + * data pointer parameter. * Returns num of read bytes on success or a negative error * code. */
Address spelling errors flagged by codespell. This patch follows-up on an earlier patch by Colin Ian King, which addressed a spelling error in a user-visible log message [1]. This patch includes that change. [1] https://lore.kernel.org/netdev/20231209225135.4055334-1-colin.i.king@gmail.com/ This patch is intended to cover all files under drivers/net/ethernet/mellanox/mlx4 Signed-off-by: Simon Horman <horms@kernel.org> --- drivers/net/ethernet/mellanox/mlx4/cmd.c | 7 ++++--- drivers/net/ethernet/mellanox/mlx4/cq.c | 4 ++-- drivers/net/ethernet/mellanox/mlx4/en_clock.c | 4 ++-- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 5 +++-- drivers/net/ethernet/mellanox/mlx4/en_rx.c | 2 +- drivers/net/ethernet/mellanox/mlx4/en_tx.c | 2 +- drivers/net/ethernet/mellanox/mlx4/eq.c | 2 +- drivers/net/ethernet/mellanox/mlx4/fw_qos.h | 8 ++++---- drivers/net/ethernet/mellanox/mlx4/main.c | 4 ++-- drivers/net/ethernet/mellanox/mlx4/mlx4_stats.h | 2 +- drivers/net/ethernet/mellanox/mlx4/port.c | 2 +- 11 files changed, 22 insertions(+), 20 deletions(-)