| Message ID | 20241023205113.255866-1-csander@purestorage.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | mlx5: simplify EQ interrupt polling logic | expand |
On 23/10/2024 23:51, Caleb Sander Mateos wrote: > Use a while loop in mlx5_eq_comp_int() and mlx5_eq_async_int() to > clarify the EQE polling logic. This consolidates the next_eqe_sw() calls > for the first and subequent iterations. It also avoids a goto. Turn the > num_eqes < MLX5_EQ_POLLING_BUDGET check into a break condition. > > Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> > --- > drivers/net/ethernet/mellanox/mlx5/core/eq.c | 22 +++++++------------- > 1 file changed, 8 insertions(+), 14 deletions(-) > > diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eq.c b/drivers/net/ethernet/mellanox/mlx5/core/eq.c > index 68cb86b37e56..859dcf09b770 100644 > --- a/drivers/net/ethernet/mellanox/mlx5/core/eq.c > +++ b/drivers/net/ethernet/mellanox/mlx5/core/eq.c > @@ -114,15 +114,11 @@ static int mlx5_eq_comp_int(struct notifier_block *nb, > struct mlx5_eq *eq = &eq_comp->core; > struct mlx5_eqe *eqe; > int num_eqes = 0; > u32 cqn = -1; > > - eqe = next_eqe_sw(eq); > - if (!eqe) > - goto out; > - > - do { > + while ((eqe = next_eqe_sw(eq))) { > struct mlx5_core_cq *cq; > > /* Make sure we read EQ entry contents after we've > * checked the ownership bit. > */ > @@ -140,13 +136,14 @@ static int mlx5_eq_comp_int(struct notifier_block *nb, > "Completion event for bogus CQ 0x%x\n", cqn); > } > > ++eq->cons_index; > > - } while ((++num_eqes < MLX5_EQ_POLLING_BUDGET) && (eqe = next_eqe_sw(eq))); > + if (++num_eqes >= MLX5_EQ_POLLING_BUDGET) > + break; > + } > > -out: > eq_update_ci(eq, 1); > > if (cqn != -1) > tasklet_schedule(&eq_comp->tasklet_ctx.task); > > @@ -213,15 +210,11 @@ static int mlx5_eq_async_int(struct notifier_block *nb, > eqt = dev->priv.eq_table; > > recovery = action == ASYNC_EQ_RECOVER; > mlx5_eq_async_int_lock(eq_async, recovery, &flags); > > - eqe = next_eqe_sw(eq); > - if (!eqe) > - goto out; > - > - do { > + while ((eqe = next_eqe_sw(eq))) { > /* > * Make sure we read EQ entry contents after we've > * checked the ownership bit. > */ > dma_rmb(); > @@ -229,13 +222,14 @@ static int mlx5_eq_async_int(struct notifier_block *nb, > atomic_notifier_call_chain(&eqt->nh[eqe->type], eqe->type, eqe); > atomic_notifier_call_chain(&eqt->nh[MLX5_EVENT_TYPE_NOTIFY_ANY], eqe->type, eqe); > > ++eq->cons_index; > > - } while ((++num_eqes < MLX5_EQ_POLLING_BUDGET) && (eqe = next_eqe_sw(eq))); > + if (++num_eqes >= MLX5_EQ_POLLING_BUDGET) > + break; > + } > > -out: > eq_update_ci(eq, 1); > mlx5_eq_async_int_unlock(eq_async, recovery, &flags); > > return unlikely(recovery) ? num_eqes : 0; > } LGTM. Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Thanks.
On Wed, Oct 23, 2024 at 02:51:12PM -0600, Caleb Sander Mateos wrote: > Use a while loop in mlx5_eq_comp_int() and mlx5_eq_async_int() to > clarify the EQE polling logic. This consolidates the next_eqe_sw() calls > for the first and subequent iterations. It also avoids a goto. Turn the > num_eqes < MLX5_EQ_POLLING_BUDGET check into a break condition. > > Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Reviewed-by: Simon Horman <horms@kernel.org>
On Wed, 23 Oct 2024 14:51:12 -0600 Caleb Sander Mateos wrote: > Use a while loop in mlx5_eq_comp_int() and mlx5_eq_async_int() to > clarify the EQE polling logic. This consolidates the next_eqe_sw() calls > for the first and subequent iterations. It also avoids a goto. Turn the > num_eqes < MLX5_EQ_POLLING_BUDGET check into a break condition. Applied, thanks!
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eq.c b/drivers/net/ethernet/mellanox/mlx5/core/eq.c index 68cb86b37e56..859dcf09b770 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eq.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eq.c @@ -114,15 +114,11 @@ static int mlx5_eq_comp_int(struct notifier_block *nb, struct mlx5_eq *eq = &eq_comp->core; struct mlx5_eqe *eqe; int num_eqes = 0; u32 cqn = -1; - eqe = next_eqe_sw(eq); - if (!eqe) - goto out; - - do { + while ((eqe = next_eqe_sw(eq))) { struct mlx5_core_cq *cq; /* Make sure we read EQ entry contents after we've * checked the ownership bit. */ @@ -140,13 +136,14 @@ static int mlx5_eq_comp_int(struct notifier_block *nb, "Completion event for bogus CQ 0x%x\n", cqn); } ++eq->cons_index; - } while ((++num_eqes < MLX5_EQ_POLLING_BUDGET) && (eqe = next_eqe_sw(eq))); + if (++num_eqes >= MLX5_EQ_POLLING_BUDGET) + break; + } -out: eq_update_ci(eq, 1); if (cqn != -1) tasklet_schedule(&eq_comp->tasklet_ctx.task); @@ -213,15 +210,11 @@ static int mlx5_eq_async_int(struct notifier_block *nb, eqt = dev->priv.eq_table; recovery = action == ASYNC_EQ_RECOVER; mlx5_eq_async_int_lock(eq_async, recovery, &flags); - eqe = next_eqe_sw(eq); - if (!eqe) - goto out; - - do { + while ((eqe = next_eqe_sw(eq))) { /* * Make sure we read EQ entry contents after we've * checked the ownership bit. */ dma_rmb(); @@ -229,13 +222,14 @@ static int mlx5_eq_async_int(struct notifier_block *nb, atomic_notifier_call_chain(&eqt->nh[eqe->type], eqe->type, eqe); atomic_notifier_call_chain(&eqt->nh[MLX5_EVENT_TYPE_NOTIFY_ANY], eqe->type, eqe); ++eq->cons_index; - } while ((++num_eqes < MLX5_EQ_POLLING_BUDGET) && (eqe = next_eqe_sw(eq))); + if (++num_eqes >= MLX5_EQ_POLLING_BUDGET) + break; + } -out: eq_update_ci(eq, 1); mlx5_eq_async_int_unlock(eq_async, recovery, &flags); return unlikely(recovery) ? num_eqes : 0; }
Use a while loop in mlx5_eq_comp_int() and mlx5_eq_async_int() to clarify the EQE polling logic. This consolidates the next_eqe_sw() calls for the first and subequent iterations. It also avoids a goto. Turn the num_eqes < MLX5_EQ_POLLING_BUDGET check into a break condition. Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> --- drivers/net/ethernet/mellanox/mlx5/core/eq.c | 22 +++++++------------- 1 file changed, 8 insertions(+), 14 deletions(-)