mbox series

[v6,0/4] remoteproc: restructure the remoteproc VirtIO device

Message ID 20220603163158.612513-1-arnaud.pouliquen@foss.st.com (mailing list archive)
Headers show
Series remoteproc: restructure the remoteproc VirtIO device | expand

Message

Arnaud POULIQUEN June 3, 2022, 4:31 p.m. UTC
1) Update from V5 [1]:

Updates based on Mathieu's comments.
Updates are listed in the commit message of each patch.

[1] https://lkml.org/lkml/2022/4/6/597

2) Patchset description:

This series is a part of the work initiated a long time ago in 
the series "remoteproc: Decorelate virtio from core"[2]

Objective of the work:
- Update the remoteproc VirtIO device creation (use platform device)
- Allow to declare remoteproc VirtIO device in DT
    - declare resources associated to a remote proc VirtIO
    - declare a list of VirtIO supported by the platform.
- Prepare the enhancement to more VirtIO devices (e.g I2C, audio, video, ...).
  For instance be able to declare a I2C device in a virtio-i2C node.
- Keep the legacy working!
- Try to improve the picture about concerns reported by Christoph Hellwing [3][4]

[2] https://lkml.org/lkml/2020/4/16/1817
[3] https://lkml.org/lkml/2021/6/23/607
[4] https://patchwork.kernel.org/project/linux-remoteproc/patch/AOKowLclCbOCKxyiJ71WeNyuAAj2q8EUtxrXbyky5E@cp7-web-042.plabs.ch/

In term of device tree this would result in such hierarchy (stm32mp1 example with 2 virtio RPMSG):

	m4_rproc: m4@10000000 {
		compatible = "st,stm32mp1-m4";
		reg = <0x10000000 0x40000>,
		      <0x30000000 0x40000>,
		      <0x38000000 0x10000>;
        memory-region = <&retram>, <&mcuram>,<&mcuram2>;
        mboxes = <&ipcc 2>, <&ipcc 3>;
        mbox-names = "shutdown", "detach";
        status = "okay";

        #address-cells = <1>;
        #size-cells = <0>;
        
        vdev@0 {
		compatible = "rproc-virtio";
		reg = <0>;
		virtio,id = <7>;  /* RPMSG */
		memory-region = <&vdev0vring0>, <&vdev0vring1>, <&vdev0buffer>;
		mboxes = <&ipcc 0>, <&ipcc 1>;
		mbox-names = "vq0", "vq1";
		status = "okay";
        };

        vdev@1 {
		compatible = "rproc-virtio";
		reg = <1>;
		virtio,id = <7>;  /*RPMSG */
		memory-region = <&vdev1vring0>, <&vdev1vring1>, <&vdev1buffer>;
		mboxes = <&ipcc 4>, <&ipcc 5>;
		mbox-names = "vq0", "vq1";
		status = "okay";
        };
};

I have divided the work in 4 steps to simplify the review, This series implements only
the step 1:
step 1:  redefine the remoteproc VirtIO device as a platform device
  - migrate rvdev management in remoteproc virtio.c,
  - create a remotproc virtio config ( can be disabled for platform that not use VirtIO IPC.
step 2: add possibility to declare and probe a VirtIO sub node
  - VirtIO bindings declaration,
  - multi DT VirtIO devices support,
  - introduction of a remote proc virtio bind device mechanism ,
=> https://github.com/arnopo/linux/commits/step2-virtio-in-DT
step 3: Add memory declaration in VirtIO subnode
=> https://github.com/arnopo/linux/commits/step3-virtio-memories
step 4: Add mailbox declaration in VirtIO subnode
=> https://github.com/arnopo/linux/commits/step4-virtio-mailboxes

Arnaud Pouliquen (4):
  remoteproc: core: Introduce rproc_rvdev_add_device function
  remoteproc: core: Introduce rproc_add_rvdev function
  remoteproc: Move rproc_vdev management to remoteproc_virtio.c
  remoteproc: virtio: Create platform device for the remoteproc_virtio

 drivers/remoteproc/remoteproc_core.c     | 153 +++---------------
 drivers/remoteproc/remoteproc_internal.h |  23 ++-
 drivers/remoteproc/remoteproc_virtio.c   | 188 ++++++++++++++++++++---
 include/linux/remoteproc.h               |   6 +-
 4 files changed, 209 insertions(+), 161 deletions(-)

Comments

Mathieu Poirier July 4, 2022, 5:48 p.m. UTC | #1
I have started reviewing this set.

Thanks,
Mathieu

On Fri, Jun 03, 2022 at 06:31:54PM +0200, Arnaud Pouliquen wrote:
> 1) Update from V5 [1]:
> 
> Updates based on Mathieu's comments.
> Updates are listed in the commit message of each patch.
> 
> [1] https://lkml.org/lkml/2022/4/6/597
> 
> 2) Patchset description:
> 
> This series is a part of the work initiated a long time ago in 
> the series "remoteproc: Decorelate virtio from core"[2]
> 
> Objective of the work:
> - Update the remoteproc VirtIO device creation (use platform device)
> - Allow to declare remoteproc VirtIO device in DT
>     - declare resources associated to a remote proc VirtIO
>     - declare a list of VirtIO supported by the platform.
> - Prepare the enhancement to more VirtIO devices (e.g I2C, audio, video, ...).
>   For instance be able to declare a I2C device in a virtio-i2C node.
> - Keep the legacy working!
> - Try to improve the picture about concerns reported by Christoph Hellwing [3][4]
> 
> [2] https://lkml.org/lkml/2020/4/16/1817
> [3] https://lkml.org/lkml/2021/6/23/607
> [4] https://patchwork.kernel.org/project/linux-remoteproc/patch/AOKowLclCbOCKxyiJ71WeNyuAAj2q8EUtxrXbyky5E@cp7-web-042.plabs.ch/
> 
> In term of device tree this would result in such hierarchy (stm32mp1 example with 2 virtio RPMSG):
> 
> 	m4_rproc: m4@10000000 {
> 		compatible = "st,stm32mp1-m4";
> 		reg = <0x10000000 0x40000>,
> 		      <0x30000000 0x40000>,
> 		      <0x38000000 0x10000>;
>         memory-region = <&retram>, <&mcuram>,<&mcuram2>;
>         mboxes = <&ipcc 2>, <&ipcc 3>;
>         mbox-names = "shutdown", "detach";
>         status = "okay";
> 
>         #address-cells = <1>;
>         #size-cells = <0>;
>         
>         vdev@0 {
> 		compatible = "rproc-virtio";
> 		reg = <0>;
> 		virtio,id = <7>;  /* RPMSG */
> 		memory-region = <&vdev0vring0>, <&vdev0vring1>, <&vdev0buffer>;
> 		mboxes = <&ipcc 0>, <&ipcc 1>;
> 		mbox-names = "vq0", "vq1";
> 		status = "okay";
>         };
> 
>         vdev@1 {
> 		compatible = "rproc-virtio";
> 		reg = <1>;
> 		virtio,id = <7>;  /*RPMSG */
> 		memory-region = <&vdev1vring0>, <&vdev1vring1>, <&vdev1buffer>;
> 		mboxes = <&ipcc 4>, <&ipcc 5>;
> 		mbox-names = "vq0", "vq1";
> 		status = "okay";
>         };
> };
> 
> I have divided the work in 4 steps to simplify the review, This series implements only
> the step 1:
> step 1:  redefine the remoteproc VirtIO device as a platform device
>   - migrate rvdev management in remoteproc virtio.c,
>   - create a remotproc virtio config ( can be disabled for platform that not use VirtIO IPC.
> step 2: add possibility to declare and probe a VirtIO sub node
>   - VirtIO bindings declaration,
>   - multi DT VirtIO devices support,
>   - introduction of a remote proc virtio bind device mechanism ,
> => https://github.com/arnopo/linux/commits/step2-virtio-in-DT
> step 3: Add memory declaration in VirtIO subnode
> => https://github.com/arnopo/linux/commits/step3-virtio-memories
> step 4: Add mailbox declaration in VirtIO subnode
> => https://github.com/arnopo/linux/commits/step4-virtio-mailboxes
> 
> Arnaud Pouliquen (4):
>   remoteproc: core: Introduce rproc_rvdev_add_device function
>   remoteproc: core: Introduce rproc_add_rvdev function
>   remoteproc: Move rproc_vdev management to remoteproc_virtio.c
>   remoteproc: virtio: Create platform device for the remoteproc_virtio
> 
>  drivers/remoteproc/remoteproc_core.c     | 153 +++---------------
>  drivers/remoteproc/remoteproc_internal.h |  23 ++-
>  drivers/remoteproc/remoteproc_virtio.c   | 188 ++++++++++++++++++++---
>  include/linux/remoteproc.h               |   6 +-
>  4 files changed, 209 insertions(+), 161 deletions(-)
> 
> -- 
> 2.24.3
>