| Message ID | 1476878748-32097-2-git-send-email-matt.redfearn@imgtec.com (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
HI Matt, Thanks for your patch. I am trying it. Please see my questions inline. Thanks, Wendy On Wed, Oct 19, 2016 at 5:05 AM, Matt Redfearn <matt.redfearn@imgtec.com> wrote: > This patch adds a sysfs interface to rproc allowing the firmware name > and processor state to be changed dynamically. > > State was previously available in debugfs, and is replicated here. The > firmware file allows retrieval of the running firmware name, and a new > one to be specified at run time, so long as the remote processor has > been stopped. > > Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> > > --- > > Changes in v3: > Drop call to rproc_add_virtio_devices from sysfs firmware_store > Use strcspn to find firmware name length > Explicit indexes for state strings > > Changes in v2: > Have firmware_store perform the necessary steps inline. > Use sysfs_streq when dealing with writes to sysfs files > > Documentation/ABI/testing/sysfs-class-remoteproc | 50 ++++++++ > drivers/remoteproc/Makefile | 1 + > drivers/remoteproc/remoteproc_core.c | 3 + > drivers/remoteproc/remoteproc_internal.h | 5 + > drivers/remoteproc/remoteproc_sysfs.c | 151 +++++++++++++++++++++++ > 5 files changed, 210 insertions(+) > create mode 100644 Documentation/ABI/testing/sysfs-class-remoteproc > create mode 100644 drivers/remoteproc/remoteproc_sysfs.c > > diff --git a/Documentation/ABI/testing/sysfs-class-remoteproc b/Documentation/ABI/testing/sysfs-class-remoteproc > new file mode 100644 > index 000000000000..d188afebc8ba > --- /dev/null > +++ b/Documentation/ABI/testing/sysfs-class-remoteproc > @@ -0,0 +1,50 @@ > +What: /sys/class/remoteproc/.../firmware > +Date: October 2016 > +Contact: Matt Redfearn <matt.redfearn@imgtec.com> > +Description: Remote processor firmware > + > + Reports the name of the firmware currently loaded to the > + remote processor. > + > + To change the running firmware, ensure the remote processor is > + stopped (using /sys/class/remoteproc/.../state) and write a new filename. > + > +What: /sys/class/remoteproc/.../state > +Date: October 2016 > +Contact: Matt Redfearn <matt.redfearn@imgtec.com> > +Description: Remote processor state > + > + Reports the state of the remote processor, which will be one of: > + > + "offline" > + "suspended" > + "running" > + "crashed" > + "invalid" > + > + "offline" means the remote processor is powered off. > + > + "suspended" means that the remote processor is suspended and > + must be woken to receive messages. > + > + "running" is the normal state of an available remote processor > + > + "crashed" indicates that a problem/crash has been detected on > + the remote processor. > + > + "invalid" is returned if the remote processor is in an > + unknown state. > + > + Writing this file controls the state of the remote processor. > + The following states can be written: > + > + "start" > + "stop" > + > + Writing "start" will attempt to start the processor running the > + firmware indicated by, or written to, > + /sys/class/remoteproc/.../firmware. The remote processor should > + transition to "running" state. > + > + Writing "stop" will attempt to halt the remote processor and > + return it to the "offline" state. > diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile > index 6dfb62ed643f..6da9b12f9798 100644 > --- a/drivers/remoteproc/Makefile > +++ b/drivers/remoteproc/Makefile > @@ -5,6 +5,7 @@ > obj-$(CONFIG_REMOTEPROC) += remoteproc.o > remoteproc-y := remoteproc_core.o > remoteproc-y += remoteproc_debugfs.o > +remoteproc-y += remoteproc_sysfs.o > remoteproc-y += remoteproc_virtio.o > remoteproc-y += remoteproc_elf_loader.o > obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o > diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c > index ccc2a73e94dd..b1860949d106 100644 > --- a/drivers/remoteproc/remoteproc_core.c > +++ b/drivers/remoteproc/remoteproc_core.c > @@ -1347,6 +1347,7 @@ struct rproc *rproc_alloc(struct device *dev, const char *name, > device_initialize(&rproc->dev); > rproc->dev.parent = dev; > rproc->dev.type = &rproc_type; > + rproc->dev.class = &rproc_class; > > /* Assign a unique device index and name */ > rproc->index = ida_simple_get(&rproc_dev_index, 0, 0, GFP_KERNEL); > @@ -1485,6 +1486,7 @@ EXPORT_SYMBOL(rproc_report_crash); > > static int __init remoteproc_init(void) > { > + rproc_init_sysfs(); > rproc_init_debugfs(); > > return 0; > @@ -1496,6 +1498,7 @@ static void __exit remoteproc_exit(void) > ida_destroy(&rproc_dev_index); > > rproc_exit_debugfs(); > + rproc_exit_sysfs(); > } > module_exit(remoteproc_exit); > > diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h > index 4cf93ca2816e..c2c3e4762b90 100644 > --- a/drivers/remoteproc/remoteproc_internal.h > +++ b/drivers/remoteproc/remoteproc_internal.h > @@ -63,6 +63,11 @@ void rproc_create_debug_dir(struct rproc *rproc); > void rproc_init_debugfs(void); > void rproc_exit_debugfs(void); > > +/* from remoteproc_sysfs.c */ > +extern struct class rproc_class; > +int rproc_init_sysfs(void); > +void rproc_exit_sysfs(void); > + > void rproc_free_vring(struct rproc_vring *rvring); > int rproc_alloc_vring(struct rproc_vdev *rvdev, int i); > > diff --git a/drivers/remoteproc/remoteproc_sysfs.c b/drivers/remoteproc/remoteproc_sysfs.c > new file mode 100644 > index 000000000000..bc5b0e00efb1 > --- /dev/null > +++ b/drivers/remoteproc/remoteproc_sysfs.c > @@ -0,0 +1,151 @@ > +/* > + * Remote Processor Framework > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include <linux/remoteproc.h> > + > +#include "remoteproc_internal.h" > + > +#define to_rproc(d) container_of(d, struct rproc, dev) > + > +/* Expose the loaded / running firmware name via sysfs */ > +static ssize_t firmware_show(struct device *dev, struct device_attribute *attr, > + char *buf) > +{ > + struct rproc *rproc = to_rproc(dev); > + > + return sprintf(buf, "%s\n", rproc->firmware); > +} > + > +/* Change firmware name via sysfs */ > +static ssize_t firmware_store(struct device *dev, > + struct device_attribute *attr, > + const char *buf, size_t count) > +{ > + struct rproc *rproc = to_rproc(dev); > + char *p; > + int err, len = count; > + > + err = mutex_lock_interruptible(&rproc->lock); > + if (err) { > + dev_err(dev, "can't lock rproc %s: %d\n", rproc->name, err); > + return -EINVAL; > + } > + > + if (rproc->state != RPROC_OFFLINE) { > + dev_err(dev, "can't change firmware while running\n"); > + err = -EBUSY; > + goto out; > + } > + > + len = strcspn(buf, "\n"); > + > + p = kstrndup(buf, len, GFP_KERNEL); > + if (!p) { > + err = -ENOMEM; > + goto out; > + } > + > + kfree(rproc->firmware); it gives me kernel panic if the initial firmware name is passed from my remoteproc driver to rproc_alloc() and it is a const string. It is better to have another modification to the remoteproc_core.c as follows in the rproc_alloc(). - if (!firmware) + if (!firmware) { /* * Make room for default firmware name (minus %s plus '\0'). * If the caller didn't pass in a firmware name then @@ -1332,17 +1346,29 @@ struct rproc *rproc_alloc(struct device *dev, const char *name, * the caller doesn't pass one). */ name_len = strlen(name) + strlen(template) - 2 + 1; + p = kmalloc_track_caller(name_len, GFP_KERNEL); + if (!p) + return NULL; + snprintf(p, name_len, template, name); + } else { + p = kstrndup(firmware, strlen(firmware), GFP_KERNEL); + if (!p) { + return NULL; + } + } - rproc = kzalloc(sizeof(*rproc) + len + name_len, GFP_KERNEL); + rproc = kzalloc(sizeof(*rproc) + len, GFP_KERNEL); > + rproc->firmware = p; > +out: > + mutex_unlock(&rproc->lock); > + > + return err ? err : count; > +} > +static DEVICE_ATTR_RW(firmware); > + > +/* > + * A state-to-string lookup table, for exposing a human readable state > + * via sysfs. Always keep in sync with enum rproc_state > + */ > +static const char * const rproc_state_string[] = { > + [RPROC_OFFLINE] = "offline", > + [RPROC_SUSPENDED] = "suspended", > + [RPROC_RUNNING] = "running", > + [RPROC_CRASHED] = "crashed", > + [RPROC_LAST] = "invalid", > +}; > + > +/* Expose the state of the remote processor via sysfs */ > +static ssize_t state_show(struct device *dev, struct device_attribute *attr, > + char *buf) > +{ > + struct rproc *rproc = to_rproc(dev); > + unsigned int state; > + > + state = rproc->state > RPROC_LAST ? RPROC_LAST : rproc->state; > + return sprintf(buf, "%s\n", rproc_state_string[state]); > +} > + > +/* Change remote processor state via sysfs */ > +static ssize_t state_store(struct device *dev, > + struct device_attribute *attr, > + const char *buf, size_t count) > +{ > + struct rproc *rproc = to_rproc(dev); > + int ret = 0; > + > + if (sysfs_streq(buf, "start")) { > + if (rproc->state == RPROC_RUNNING) > + return -EBUSY; > + > + ret = rproc_boot(rproc); > + if (ret) > + dev_err(&rproc->dev, "Boot failed: %d\n", ret); > + } else if (sysfs_streq(buf, "stop")) { > + if (rproc->state != RPROC_RUNNING) > + return -EINVAL; > + > + rproc_shutdown(rproc); The kernel hanged when it was trying to unregister the virtio device after I tried"stop". It doesn't look like related to this sysfs API. But just wonder have you seen similar issue? > + } else { > + dev_err(&rproc->dev, "Unrecognised option: %s\n", buf); > + ret = -EINVAL; > + } > + return ret ? ret : count; > +} > +static DEVICE_ATTR_RW(state); > + > +static struct attribute *rproc_attrs[] = { > + &dev_attr_firmware.attr, > + &dev_attr_state.attr, > + NULL > +}; > + > +static const struct attribute_group rproc_devgroup = { > + .attrs = rproc_attrs > +}; > + > +static const struct attribute_group *rproc_devgroups[] = { > + &rproc_devgroup, > + NULL > +}; > + > +struct class rproc_class = { > + .name = "remoteproc", > + .dev_groups = rproc_devgroups, > +}; > + > +int __init rproc_init_sysfs(void) > +{ > + /* create remoteproc device class for sysfs */ > + int err = class_register(&rproc_class); > + > + if (err) > + pr_err("remoteproc: unable to register class\n"); > + return err; > +} > + > +void __exit rproc_exit_sysfs(void) > +{ > + class_unregister(&rproc_class); > +} > -- > 2.7.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-remoteproc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-remoteproc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Wendy, Replies inline On 03/11/16 23:40, Wendy Liang wrote: > HI Matt, > > Thanks for your patch. I am trying it. > > Please see my questions inline. > > Thanks, > Wendy > > On Wed, Oct 19, 2016 at 5:05 AM, Matt Redfearn <matt.redfearn@imgtec.com> wrote: >> This patch adds a sysfs interface to rproc allowing the firmware name >> and processor state to be changed dynamically. >> >> State was previously available in debugfs, and is replicated here. The >> firmware file allows retrieval of the running firmware name, and a new >> one to be specified at run time, so long as the remote processor has >> been stopped. >> >> Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> >> >> --- >> >> Changes in v3: >> Drop call to rproc_add_virtio_devices from sysfs firmware_store >> Use strcspn to find firmware name length >> Explicit indexes for state strings >> >> Changes in v2: >> Have firmware_store perform the necessary steps inline. >> Use sysfs_streq when dealing with writes to sysfs files >> >> Documentation/ABI/testing/sysfs-class-remoteproc | 50 ++++++++ >> drivers/remoteproc/Makefile | 1 + >> drivers/remoteproc/remoteproc_core.c | 3 + >> drivers/remoteproc/remoteproc_internal.h | 5 + >> drivers/remoteproc/remoteproc_sysfs.c | 151 +++++++++++++++++++++++ >> 5 files changed, 210 insertions(+) >> create mode 100644 Documentation/ABI/testing/sysfs-class-remoteproc >> create mode 100644 drivers/remoteproc/remoteproc_sysfs.c >> >> diff --git a/Documentation/ABI/testing/sysfs-class-remoteproc b/Documentation/ABI/testing/sysfs-class-remoteproc >> new file mode 100644 >> index 000000000000..d188afebc8ba >> --- /dev/null >> +++ b/Documentation/ABI/testing/sysfs-class-remoteproc >> @@ -0,0 +1,50 @@ >> +What: /sys/class/remoteproc/.../firmware >> +Date: October 2016 >> +Contact: Matt Redfearn <matt.redfearn@imgtec.com> >> +Description: Remote processor firmware >> + >> + Reports the name of the firmware currently loaded to the >> + remote processor. >> + >> + To change the running firmware, ensure the remote processor is >> + stopped (using /sys/class/remoteproc/.../state) and write a new filename. >> + >> +What: /sys/class/remoteproc/.../state >> +Date: October 2016 >> +Contact: Matt Redfearn <matt.redfearn@imgtec.com> >> +Description: Remote processor state >> + >> + Reports the state of the remote processor, which will be one of: >> + >> + "offline" >> + "suspended" >> + "running" >> + "crashed" >> + "invalid" >> + >> + "offline" means the remote processor is powered off. >> + >> + "suspended" means that the remote processor is suspended and >> + must be woken to receive messages. >> + >> + "running" is the normal state of an available remote processor >> + >> + "crashed" indicates that a problem/crash has been detected on >> + the remote processor. >> + >> + "invalid" is returned if the remote processor is in an >> + unknown state. >> + >> + Writing this file controls the state of the remote processor. >> + The following states can be written: >> + >> + "start" >> + "stop" >> + >> + Writing "start" will attempt to start the processor running the >> + firmware indicated by, or written to, >> + /sys/class/remoteproc/.../firmware. The remote processor should >> + transition to "running" state. >> + >> + Writing "stop" will attempt to halt the remote processor and >> + return it to the "offline" state. >> diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile >> index 6dfb62ed643f..6da9b12f9798 100644 >> --- a/drivers/remoteproc/Makefile >> +++ b/drivers/remoteproc/Makefile >> @@ -5,6 +5,7 @@ >> obj-$(CONFIG_REMOTEPROC) += remoteproc.o >> remoteproc-y := remoteproc_core.o >> remoteproc-y += remoteproc_debugfs.o >> +remoteproc-y += remoteproc_sysfs.o >> remoteproc-y += remoteproc_virtio.o >> remoteproc-y += remoteproc_elf_loader.o >> obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o >> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c >> index ccc2a73e94dd..b1860949d106 100644 >> --- a/drivers/remoteproc/remoteproc_core.c >> +++ b/drivers/remoteproc/remoteproc_core.c >> @@ -1347,6 +1347,7 @@ struct rproc *rproc_alloc(struct device *dev, const char *name, >> device_initialize(&rproc->dev); >> rproc->dev.parent = dev; >> rproc->dev.type = &rproc_type; >> + rproc->dev.class = &rproc_class; >> >> /* Assign a unique device index and name */ >> rproc->index = ida_simple_get(&rproc_dev_index, 0, 0, GFP_KERNEL); >> @@ -1485,6 +1486,7 @@ EXPORT_SYMBOL(rproc_report_crash); >> >> static int __init remoteproc_init(void) >> { >> + rproc_init_sysfs(); >> rproc_init_debugfs(); >> >> return 0; >> @@ -1496,6 +1498,7 @@ static void __exit remoteproc_exit(void) >> ida_destroy(&rproc_dev_index); >> >> rproc_exit_debugfs(); >> + rproc_exit_sysfs(); >> } >> module_exit(remoteproc_exit); >> >> diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h >> index 4cf93ca2816e..c2c3e4762b90 100644 >> --- a/drivers/remoteproc/remoteproc_internal.h >> +++ b/drivers/remoteproc/remoteproc_internal.h >> @@ -63,6 +63,11 @@ void rproc_create_debug_dir(struct rproc *rproc); >> void rproc_init_debugfs(void); >> void rproc_exit_debugfs(void); >> >> +/* from remoteproc_sysfs.c */ >> +extern struct class rproc_class; >> +int rproc_init_sysfs(void); >> +void rproc_exit_sysfs(void); >> + >> void rproc_free_vring(struct rproc_vring *rvring); >> int rproc_alloc_vring(struct rproc_vdev *rvdev, int i); >> >> diff --git a/drivers/remoteproc/remoteproc_sysfs.c b/drivers/remoteproc/remoteproc_sysfs.c >> new file mode 100644 >> index 000000000000..bc5b0e00efb1 >> --- /dev/null >> +++ b/drivers/remoteproc/remoteproc_sysfs.c >> @@ -0,0 +1,151 @@ >> +/* >> + * Remote Processor Framework >> + * >> + * This program is free software; you can redistribute it and/or >> + * modify it under the terms of the GNU General Public License >> + * version 2 as published by the Free Software Foundation. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + */ >> + >> +#include <linux/remoteproc.h> >> + >> +#include "remoteproc_internal.h" >> + >> +#define to_rproc(d) container_of(d, struct rproc, dev) >> + >> +/* Expose the loaded / running firmware name via sysfs */ >> +static ssize_t firmware_show(struct device *dev, struct device_attribute *attr, >> + char *buf) >> +{ >> + struct rproc *rproc = to_rproc(dev); >> + >> + return sprintf(buf, "%s\n", rproc->firmware); >> +} >> + >> +/* Change firmware name via sysfs */ >> +static ssize_t firmware_store(struct device *dev, >> + struct device_attribute *attr, >> + const char *buf, size_t count) >> +{ >> + struct rproc *rproc = to_rproc(dev); >> + char *p; >> + int err, len = count; >> + >> + err = mutex_lock_interruptible(&rproc->lock); >> + if (err) { >> + dev_err(dev, "can't lock rproc %s: %d\n", rproc->name, err); >> + return -EINVAL; >> + } >> + >> + if (rproc->state != RPROC_OFFLINE) { >> + dev_err(dev, "can't change firmware while running\n"); >> + err = -EBUSY; >> + goto out; >> + } >> + >> + len = strcspn(buf, "\n"); >> + >> + p = kstrndup(buf, len, GFP_KERNEL); >> + if (!p) { >> + err = -ENOMEM; >> + goto out; >> + } >> + >> + kfree(rproc->firmware); > it gives me kernel panic if the initial firmware name is passed from > my remoteproc driver to rproc_alloc() > and it is a const string. > It is better to have another modification to the remoteproc_core.c as > follows in the rproc_alloc(). > > - if (!firmware) > + if (!firmware) { > /* > * Make room for default firmware name (minus %s plus '\0'). > * If the caller didn't pass in a firmware name then > @@ -1332,17 +1346,29 @@ struct rproc *rproc_alloc(struct device *dev, > const char *name, > * the caller doesn't pass one). > */ > name_len = strlen(name) + strlen(template) - 2 + 1; > + p = kmalloc_track_caller(name_len, GFP_KERNEL); > + if (!p) > + return NULL; > + snprintf(p, name_len, template, name); > + } else { > + p = kstrndup(firmware, strlen(firmware), GFP_KERNEL); > + if (!p) { > + return NULL; > + } > + } > > - rproc = kzalloc(sizeof(*rproc) + len + name_len, GFP_KERNEL); > + rproc = kzalloc(sizeof(*rproc) + len, GFP_KERNEL); Yes - to address this a very similar change was already introduced into Bjorn's tree in https://github.com/andersson/remoteproc/commit/0f57dc6ae1ff0c702450083176b657ba37c07363 > >> + rproc->firmware = p; >> +out: >> + mutex_unlock(&rproc->lock); >> + >> + return err ? err : count; >> +} >> +static DEVICE_ATTR_RW(firmware); >> + >> +/* >> + * A state-to-string lookup table, for exposing a human readable state >> + * via sysfs. Always keep in sync with enum rproc_state >> + */ >> +static const char * const rproc_state_string[] = { >> + [RPROC_OFFLINE] = "offline", >> + [RPROC_SUSPENDED] = "suspended", >> + [RPROC_RUNNING] = "running", >> + [RPROC_CRASHED] = "crashed", >> + [RPROC_LAST] = "invalid", >> +}; >> + >> +/* Expose the state of the remote processor via sysfs */ >> +static ssize_t state_show(struct device *dev, struct device_attribute *attr, >> + char *buf) >> +{ >> + struct rproc *rproc = to_rproc(dev); >> + unsigned int state; >> + >> + state = rproc->state > RPROC_LAST ? RPROC_LAST : rproc->state; >> + return sprintf(buf, "%s\n", rproc_state_string[state]); >> +} >> + >> +/* Change remote processor state via sysfs */ >> +static ssize_t state_store(struct device *dev, >> + struct device_attribute *attr, >> + const char *buf, size_t count) >> +{ >> + struct rproc *rproc = to_rproc(dev); >> + int ret = 0; >> + >> + if (sysfs_streq(buf, "start")) { >> + if (rproc->state == RPROC_RUNNING) >> + return -EBUSY; >> + >> + ret = rproc_boot(rproc); >> + if (ret) >> + dev_err(&rproc->dev, "Boot failed: %d\n", ret); >> + } else if (sysfs_streq(buf, "stop")) { >> + if (rproc->state != RPROC_RUNNING) >> + return -EINVAL; >> + >> + rproc_shutdown(rproc); > The kernel hanged when it was trying to unregister the virtio device > after I tried"stop". > It doesn't look like related to this sysfs API. But just wonder have you seen > similar issue? I have not seen that in my testing - but I did run into things such as virtio_console giving warnings when the device was removed from a remoteproc device (which I submitted a fix for). I guess that the removal of remoteproc devices at runtime has previously not been as easy and therefore not as well tested so there may well be a few issues lurking as new code paths are tested, depending on which virtio devices your firmware implements. Thanks, Matt > >> + } else { >> + dev_err(&rproc->dev, "Unrecognised option: %s\n", buf); >> + ret = -EINVAL; >> + } >> + return ret ? ret : count; >> +} >> +static DEVICE_ATTR_RW(state); >> + >> +static struct attribute *rproc_attrs[] = { >> + &dev_attr_firmware.attr, >> + &dev_attr_state.attr, >> + NULL >> +}; >> + >> +static const struct attribute_group rproc_devgroup = { >> + .attrs = rproc_attrs >> +}; >> + >> +static const struct attribute_group *rproc_devgroups[] = { >> + &rproc_devgroup, >> + NULL >> +}; >> + >> +struct class rproc_class = { >> + .name = "remoteproc", >> + .dev_groups = rproc_devgroups, >> +}; >> + >> +int __init rproc_init_sysfs(void) >> +{ >> + /* create remoteproc device class for sysfs */ >> + int err = class_register(&rproc_class); >> + >> + if (err) >> + pr_err("remoteproc: unable to register class\n"); >> + return err; >> +} >> + >> +void __exit rproc_exit_sysfs(void) >> +{ >> + class_unregister(&rproc_class); >> +} >> -- >> 2.7.4 >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-remoteproc" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-remoteproc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Matt, On Fri, Nov 4, 2016 at 2:13 AM, Matt Redfearn <matt.redfearn@imgtec.com> wrote: > Hi Wendy, > > Replies inline > > > > On 03/11/16 23:40, Wendy Liang wrote: >> >> HI Matt, >> >> Thanks for your patch. I am trying it. >> >> Please see my questions inline. >> >> Thanks, >> Wendy >> >> On Wed, Oct 19, 2016 at 5:05 AM, Matt Redfearn <matt.redfearn@imgtec.com> >> wrote: >>> >>> This patch adds a sysfs interface to rproc allowing the firmware name >>> and processor state to be changed dynamically. >>> >>> State was previously available in debugfs, and is replicated here. The >>> firmware file allows retrieval of the running firmware name, and a new >>> one to be specified at run time, so long as the remote processor has >>> been stopped. >>> >>> Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> >>> >>> --- >>> >>> Changes in v3: >>> Drop call to rproc_add_virtio_devices from sysfs firmware_store >>> Use strcspn to find firmware name length >>> Explicit indexes for state strings >>> >>> Changes in v2: >>> Have firmware_store perform the necessary steps inline. >>> Use sysfs_streq when dealing with writes to sysfs files >>> >>> Documentation/ABI/testing/sysfs-class-remoteproc | 50 ++++++++ >>> drivers/remoteproc/Makefile | 1 + >>> drivers/remoteproc/remoteproc_core.c | 3 + >>> drivers/remoteproc/remoteproc_internal.h | 5 + >>> drivers/remoteproc/remoteproc_sysfs.c | 151 >>> +++++++++++++++++++++++ >>> 5 files changed, 210 insertions(+) >>> create mode 100644 Documentation/ABI/testing/sysfs-class-remoteproc >>> create mode 100644 drivers/remoteproc/remoteproc_sysfs.c >>> >>> diff --git a/Documentation/ABI/testing/sysfs-class-remoteproc >>> b/Documentation/ABI/testing/sysfs-class-remoteproc >>> new file mode 100644 >>> index 000000000000..d188afebc8ba >>> --- /dev/null >>> +++ b/Documentation/ABI/testing/sysfs-class-remoteproc >>> @@ -0,0 +1,50 @@ >>> +What: /sys/class/remoteproc/.../firmware >>> +Date: October 2016 >>> +Contact: Matt Redfearn <matt.redfearn@imgtec.com> >>> +Description: Remote processor firmware >>> + >>> + Reports the name of the firmware currently loaded to the >>> + remote processor. >>> + >>> + To change the running firmware, ensure the remote >>> processor is >>> + stopped (using /sys/class/remoteproc/.../state) and write >>> a new filename. >>> + >>> +What: /sys/class/remoteproc/.../state >>> +Date: October 2016 >>> +Contact: Matt Redfearn <matt.redfearn@imgtec.com> >>> +Description: Remote processor state >>> + >>> + Reports the state of the remote processor, which will be >>> one of: >>> + >>> + "offline" >>> + "suspended" >>> + "running" >>> + "crashed" >>> + "invalid" >>> + >>> + "offline" means the remote processor is powered off. >>> + >>> + "suspended" means that the remote processor is suspended >>> and >>> + must be woken to receive messages. >>> + >>> + "running" is the normal state of an available remote >>> processor >>> + >>> + "crashed" indicates that a problem/crash has been >>> detected on >>> + the remote processor. >>> + >>> + "invalid" is returned if the remote processor is in an >>> + unknown state. >>> + >>> + Writing this file controls the state of the remote >>> processor. >>> + The following states can be written: >>> + >>> + "start" >>> + "stop" >>> + >>> + Writing "start" will attempt to start the processor >>> running the >>> + firmware indicated by, or written to, >>> + /sys/class/remoteproc/.../firmware. The remote processor >>> should >>> + transition to "running" state. >>> + >>> + Writing "stop" will attempt to halt the remote processor >>> and >>> + return it to the "offline" state. >>> diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile >>> index 6dfb62ed643f..6da9b12f9798 100644 >>> --- a/drivers/remoteproc/Makefile >>> +++ b/drivers/remoteproc/Makefile >>> @@ -5,6 +5,7 @@ >>> obj-$(CONFIG_REMOTEPROC) += remoteproc.o >>> remoteproc-y := remoteproc_core.o >>> remoteproc-y += remoteproc_debugfs.o >>> +remoteproc-y += remoteproc_sysfs.o >>> remoteproc-y += remoteproc_virtio.o >>> remoteproc-y += remoteproc_elf_loader.o >>> obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o >>> diff --git a/drivers/remoteproc/remoteproc_core.c >>> b/drivers/remoteproc/remoteproc_core.c >>> index ccc2a73e94dd..b1860949d106 100644 >>> --- a/drivers/remoteproc/remoteproc_core.c >>> +++ b/drivers/remoteproc/remoteproc_core.c >>> @@ -1347,6 +1347,7 @@ struct rproc *rproc_alloc(struct device *dev, const >>> char *name, >>> device_initialize(&rproc->dev); >>> rproc->dev.parent = dev; >>> rproc->dev.type = &rproc_type; >>> + rproc->dev.class = &rproc_class; >>> >>> /* Assign a unique device index and name */ >>> rproc->index = ida_simple_get(&rproc_dev_index, 0, 0, >>> GFP_KERNEL); >>> @@ -1485,6 +1486,7 @@ EXPORT_SYMBOL(rproc_report_crash); >>> >>> static int __init remoteproc_init(void) >>> { >>> + rproc_init_sysfs(); >>> rproc_init_debugfs(); >>> >>> return 0; >>> @@ -1496,6 +1498,7 @@ static void __exit remoteproc_exit(void) >>> ida_destroy(&rproc_dev_index); >>> >>> rproc_exit_debugfs(); >>> + rproc_exit_sysfs(); >>> } >>> module_exit(remoteproc_exit); >>> >>> diff --git a/drivers/remoteproc/remoteproc_internal.h >>> b/drivers/remoteproc/remoteproc_internal.h >>> index 4cf93ca2816e..c2c3e4762b90 100644 >>> --- a/drivers/remoteproc/remoteproc_internal.h >>> +++ b/drivers/remoteproc/remoteproc_internal.h >>> @@ -63,6 +63,11 @@ void rproc_create_debug_dir(struct rproc *rproc); >>> void rproc_init_debugfs(void); >>> void rproc_exit_debugfs(void); >>> >>> +/* from remoteproc_sysfs.c */ >>> +extern struct class rproc_class; >>> +int rproc_init_sysfs(void); >>> +void rproc_exit_sysfs(void); >>> + >>> void rproc_free_vring(struct rproc_vring *rvring); >>> int rproc_alloc_vring(struct rproc_vdev *rvdev, int i); >>> >>> diff --git a/drivers/remoteproc/remoteproc_sysfs.c >>> b/drivers/remoteproc/remoteproc_sysfs.c >>> new file mode 100644 >>> index 000000000000..bc5b0e00efb1 >>> --- /dev/null >>> +++ b/drivers/remoteproc/remoteproc_sysfs.c >>> @@ -0,0 +1,151 @@ >>> +/* >>> + * Remote Processor Framework >>> + * >>> + * This program is free software; you can redistribute it and/or >>> + * modify it under the terms of the GNU General Public License >>> + * version 2 as published by the Free Software Foundation. >>> + * >>> + * This program is distributed in the hope that it will be useful, >>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >>> + * GNU General Public License for more details. >>> + */ >>> + >>> +#include <linux/remoteproc.h> >>> + >>> +#include "remoteproc_internal.h" >>> + >>> +#define to_rproc(d) container_of(d, struct rproc, dev) >>> + >>> +/* Expose the loaded / running firmware name via sysfs */ >>> +static ssize_t firmware_show(struct device *dev, struct device_attribute >>> *attr, >>> + char *buf) >>> +{ >>> + struct rproc *rproc = to_rproc(dev); >>> + >>> + return sprintf(buf, "%s\n", rproc->firmware); >>> +} >>> + >>> +/* Change firmware name via sysfs */ >>> +static ssize_t firmware_store(struct device *dev, >>> + struct device_attribute *attr, >>> + const char *buf, size_t count) >>> +{ >>> + struct rproc *rproc = to_rproc(dev); >>> + char *p; >>> + int err, len = count; >>> + >>> + err = mutex_lock_interruptible(&rproc->lock); >>> + if (err) { >>> + dev_err(dev, "can't lock rproc %s: %d\n", rproc->name, >>> err); >>> + return -EINVAL; >>> + } >>> + >>> + if (rproc->state != RPROC_OFFLINE) { >>> + dev_err(dev, "can't change firmware while running\n"); >>> + err = -EBUSY; >>> + goto out; >>> + } >>> + >>> + len = strcspn(buf, "\n"); >>> + >>> + p = kstrndup(buf, len, GFP_KERNEL); >>> + if (!p) { >>> + err = -ENOMEM; >>> + goto out; >>> + } >>> + >>> + kfree(rproc->firmware); >> >> it gives me kernel panic if the initial firmware name is passed from >> my remoteproc driver to rproc_alloc() >> and it is a const string. >> It is better to have another modification to the remoteproc_core.c as >> follows in the rproc_alloc(). >> >> - if (!firmware) >> + if (!firmware) { >> /* >> * Make room for default firmware name (minus %s plus >> '\0'). >> * If the caller didn't pass in a firmware name then >> @@ -1332,17 +1346,29 @@ struct rproc *rproc_alloc(struct device *dev, >> const char *name, >> * the caller doesn't pass one). >> */ >> name_len = strlen(name) + strlen(template) - 2 + 1; >> + p = kmalloc_track_caller(name_len, GFP_KERNEL); >> + if (!p) >> + return NULL; >> + snprintf(p, name_len, template, name); >> + } else { >> + p = kstrndup(firmware, strlen(firmware), GFP_KERNEL); >> + if (!p) { >> + return NULL; >> + } >> + } >> >> - rproc = kzalloc(sizeof(*rproc) + len + name_len, GFP_KERNEL); >> + rproc = kzalloc(sizeof(*rproc) + len, GFP_KERNEL); > > > Yes - to address this a very similar change was already introduced into > Bjorn's tree in > https://github.com/andersson/remoteproc/commit/0f57dc6ae1ff0c702450083176b657ba37c07363 Great. I didn't know that. > > > >> >>> + rproc->firmware = p; >>> +out: >>> + mutex_unlock(&rproc->lock); >>> + >>> + return err ? err : count; >>> +} >>> +static DEVICE_ATTR_RW(firmware); >>> + >>> +/* >>> + * A state-to-string lookup table, for exposing a human readable state >>> + * via sysfs. Always keep in sync with enum rproc_state >>> + */ >>> +static const char * const rproc_state_string[] = { >>> + [RPROC_OFFLINE] = "offline", >>> + [RPROC_SUSPENDED] = "suspended", >>> + [RPROC_RUNNING] = "running", >>> + [RPROC_CRASHED] = "crashed", >>> + [RPROC_LAST] = "invalid", >>> +}; >>> + >>> +/* Expose the state of the remote processor via sysfs */ >>> +static ssize_t state_show(struct device *dev, struct device_attribute >>> *attr, >>> + char *buf) >>> +{ >>> + struct rproc *rproc = to_rproc(dev); >>> + unsigned int state; >>> + >>> + state = rproc->state > RPROC_LAST ? RPROC_LAST : rproc->state; >>> + return sprintf(buf, "%s\n", rproc_state_string[state]); >>> +} >>> + >>> +/* Change remote processor state via sysfs */ >>> +static ssize_t state_store(struct device *dev, >>> + struct device_attribute *attr, >>> + const char *buf, size_t count) >>> +{ >>> + struct rproc *rproc = to_rproc(dev); >>> + int ret = 0; >>> + >>> + if (sysfs_streq(buf, "start")) { >>> + if (rproc->state == RPROC_RUNNING) >>> + return -EBUSY; >>> + >>> + ret = rproc_boot(rproc); >>> + if (ret) >>> + dev_err(&rproc->dev, "Boot failed: %d\n", ret); >>> + } else if (sysfs_streq(buf, "stop")) { >>> + if (rproc->state != RPROC_RUNNING) >>> + return -EINVAL; >>> + >>> + rproc_shutdown(rproc); >> >> The kernel hanged when it was trying to unregister the virtio device >> after I tried"stop". >> It doesn't look like related to this sysfs API. But just wonder have you >> seen >> similar issue? > > > I have not seen that in my testing - but I did run into things such as > virtio_console giving warnings when the device was removed from a remoteproc > device (which I submitted a fix for). I guess that the removal of remoteproc > devices at runtime has previously not been as easy and therefore not as well > tested so there may well be a few issues lurking as new code paths are > tested, depending on which virtio devices your firmware implements. It is just a vring deivce, I am still checking why it hanged at device_unregister() in the unregister_virtio_device(). > > Thanks, > Matt > > >> >>> + } else { >>> + dev_err(&rproc->dev, "Unrecognised option: %s\n", buf); >>> + ret = -EINVAL; >>> + } >>> + return ret ? ret : count; >>> +} >>> +static DEVICE_ATTR_RW(state); >>> + >>> +static struct attribute *rproc_attrs[] = { >>> + &dev_attr_firmware.attr, >>> + &dev_attr_state.attr, >>> + NULL >>> +}; >>> + >>> +static const struct attribute_group rproc_devgroup = { >>> + .attrs = rproc_attrs >>> +}; >>> + >>> +static const struct attribute_group *rproc_devgroups[] = { >>> + &rproc_devgroup, >>> + NULL >>> +}; >>> + >>> +struct class rproc_class = { >>> + .name = "remoteproc", >>> + .dev_groups = rproc_devgroups, >>> +}; >>> + >>> +int __init rproc_init_sysfs(void) >>> +{ >>> + /* create remoteproc device class for sysfs */ >>> + int err = class_register(&rproc_class); >>> + >>> + if (err) >>> + pr_err("remoteproc: unable to register class\n"); >>> + return err; >>> +} >>> + >>> +void __exit rproc_exit_sysfs(void) >>> +{ >>> + class_unregister(&rproc_class); >>> +} >>> -- >>> 2.7.4 >>> >>> -- >>> To unsubscribe from this list: send the line "unsubscribe >>> linux-remoteproc" in >>> the body of a message to majordomo@vger.kernel.org >>> More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- To unsubscribe from this list: send the line "unsubscribe linux-remoteproc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/ABI/testing/sysfs-class-remoteproc b/Documentation/ABI/testing/sysfs-class-remoteproc new file mode 100644 index 000000000000..d188afebc8ba --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-remoteproc @@ -0,0 +1,50 @@ +What: /sys/class/remoteproc/.../firmware +Date: October 2016 +Contact: Matt Redfearn <matt.redfearn@imgtec.com> +Description: Remote processor firmware + + Reports the name of the firmware currently loaded to the + remote processor. + + To change the running firmware, ensure the remote processor is + stopped (using /sys/class/remoteproc/.../state) and write a new filename. + +What: /sys/class/remoteproc/.../state +Date: October 2016 +Contact: Matt Redfearn <matt.redfearn@imgtec.com> +Description: Remote processor state + + Reports the state of the remote processor, which will be one of: + + "offline" + "suspended" + "running" + "crashed" + "invalid" + + "offline" means the remote processor is powered off. + + "suspended" means that the remote processor is suspended and + must be woken to receive messages. + + "running" is the normal state of an available remote processor + + "crashed" indicates that a problem/crash has been detected on + the remote processor. + + "invalid" is returned if the remote processor is in an + unknown state. + + Writing this file controls the state of the remote processor. + The following states can be written: + + "start" + "stop" + + Writing "start" will attempt to start the processor running the + firmware indicated by, or written to, + /sys/class/remoteproc/.../firmware. The remote processor should + transition to "running" state. + + Writing "stop" will attempt to halt the remote processor and + return it to the "offline" state. diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile index 6dfb62ed643f..6da9b12f9798 100644 --- a/drivers/remoteproc/Makefile +++ b/drivers/remoteproc/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_REMOTEPROC) += remoteproc.o remoteproc-y := remoteproc_core.o remoteproc-y += remoteproc_debugfs.o +remoteproc-y += remoteproc_sysfs.o remoteproc-y += remoteproc_virtio.o remoteproc-y += remoteproc_elf_loader.o obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c index ccc2a73e94dd..b1860949d106 100644 --- a/drivers/remoteproc/remoteproc_core.c +++ b/drivers/remoteproc/remoteproc_core.c @@ -1347,6 +1347,7 @@ struct rproc *rproc_alloc(struct device *dev, const char *name, device_initialize(&rproc->dev); rproc->dev.parent = dev; rproc->dev.type = &rproc_type; + rproc->dev.class = &rproc_class; /* Assign a unique device index and name */ rproc->index = ida_simple_get(&rproc_dev_index, 0, 0, GFP_KERNEL); @@ -1485,6 +1486,7 @@ EXPORT_SYMBOL(rproc_report_crash); static int __init remoteproc_init(void) { + rproc_init_sysfs(); rproc_init_debugfs(); return 0; @@ -1496,6 +1498,7 @@ static void __exit remoteproc_exit(void) ida_destroy(&rproc_dev_index); rproc_exit_debugfs(); + rproc_exit_sysfs(); } module_exit(remoteproc_exit); diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h index 4cf93ca2816e..c2c3e4762b90 100644 --- a/drivers/remoteproc/remoteproc_internal.h +++ b/drivers/remoteproc/remoteproc_internal.h @@ -63,6 +63,11 @@ void rproc_create_debug_dir(struct rproc *rproc); void rproc_init_debugfs(void); void rproc_exit_debugfs(void); +/* from remoteproc_sysfs.c */ +extern struct class rproc_class; +int rproc_init_sysfs(void); +void rproc_exit_sysfs(void); + void rproc_free_vring(struct rproc_vring *rvring); int rproc_alloc_vring(struct rproc_vdev *rvdev, int i); diff --git a/drivers/remoteproc/remoteproc_sysfs.c b/drivers/remoteproc/remoteproc_sysfs.c new file mode 100644 index 000000000000..bc5b0e00efb1 --- /dev/null +++ b/drivers/remoteproc/remoteproc_sysfs.c @@ -0,0 +1,151 @@ +/* + * Remote Processor Framework + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/remoteproc.h> + +#include "remoteproc_internal.h" + +#define to_rproc(d) container_of(d, struct rproc, dev) + +/* Expose the loaded / running firmware name via sysfs */ +static ssize_t firmware_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct rproc *rproc = to_rproc(dev); + + return sprintf(buf, "%s\n", rproc->firmware); +} + +/* Change firmware name via sysfs */ +static ssize_t firmware_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct rproc *rproc = to_rproc(dev); + char *p; + int err, len = count; + + err = mutex_lock_interruptible(&rproc->lock); + if (err) { + dev_err(dev, "can't lock rproc %s: %d\n", rproc->name, err); + return -EINVAL; + } + + if (rproc->state != RPROC_OFFLINE) { + dev_err(dev, "can't change firmware while running\n"); + err = -EBUSY; + goto out; + } + + len = strcspn(buf, "\n"); + + p = kstrndup(buf, len, GFP_KERNEL); + if (!p) { + err = -ENOMEM; + goto out; + } + + kfree(rproc->firmware); + rproc->firmware = p; +out: + mutex_unlock(&rproc->lock); + + return err ? err : count; +} +static DEVICE_ATTR_RW(firmware); + +/* + * A state-to-string lookup table, for exposing a human readable state + * via sysfs. Always keep in sync with enum rproc_state + */ +static const char * const rproc_state_string[] = { + [RPROC_OFFLINE] = "offline", + [RPROC_SUSPENDED] = "suspended", + [RPROC_RUNNING] = "running", + [RPROC_CRASHED] = "crashed", + [RPROC_LAST] = "invalid", +}; + +/* Expose the state of the remote processor via sysfs */ +static ssize_t state_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct rproc *rproc = to_rproc(dev); + unsigned int state; + + state = rproc->state > RPROC_LAST ? RPROC_LAST : rproc->state; + return sprintf(buf, "%s\n", rproc_state_string[state]); +} + +/* Change remote processor state via sysfs */ +static ssize_t state_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct rproc *rproc = to_rproc(dev); + int ret = 0; + + if (sysfs_streq(buf, "start")) { + if (rproc->state == RPROC_RUNNING) + return -EBUSY; + + ret = rproc_boot(rproc); + if (ret) + dev_err(&rproc->dev, "Boot failed: %d\n", ret); + } else if (sysfs_streq(buf, "stop")) { + if (rproc->state != RPROC_RUNNING) + return -EINVAL; + + rproc_shutdown(rproc); + } else { + dev_err(&rproc->dev, "Unrecognised option: %s\n", buf); + ret = -EINVAL; + } + return ret ? ret : count; +} +static DEVICE_ATTR_RW(state); + +static struct attribute *rproc_attrs[] = { + &dev_attr_firmware.attr, + &dev_attr_state.attr, + NULL +}; + +static const struct attribute_group rproc_devgroup = { + .attrs = rproc_attrs +}; + +static const struct attribute_group *rproc_devgroups[] = { + &rproc_devgroup, + NULL +}; + +struct class rproc_class = { + .name = "remoteproc", + .dev_groups = rproc_devgroups, +}; + +int __init rproc_init_sysfs(void) +{ + /* create remoteproc device class for sysfs */ + int err = class_register(&rproc_class); + + if (err) + pr_err("remoteproc: unable to register class\n"); + return err; +} + +void __exit rproc_exit_sysfs(void) +{ + class_unregister(&rproc_class); +}
This patch adds a sysfs interface to rproc allowing the firmware name and processor state to be changed dynamically. State was previously available in debugfs, and is replicated here. The firmware file allows retrieval of the running firmware name, and a new one to be specified at run time, so long as the remote processor has been stopped. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> --- Changes in v3: Drop call to rproc_add_virtio_devices from sysfs firmware_store Use strcspn to find firmware name length Explicit indexes for state strings Changes in v2: Have firmware_store perform the necessary steps inline. Use sysfs_streq when dealing with writes to sysfs files Documentation/ABI/testing/sysfs-class-remoteproc | 50 ++++++++ drivers/remoteproc/Makefile | 1 + drivers/remoteproc/remoteproc_core.c | 3 + drivers/remoteproc/remoteproc_internal.h | 5 + drivers/remoteproc/remoteproc_sysfs.c | 151 +++++++++++++++++++++++ 5 files changed, 210 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-class-remoteproc create mode 100644 drivers/remoteproc/remoteproc_sysfs.c