@@ -21,6 +21,7 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_reserved_mem.h>
+#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/remoteproc.h>
@@ -52,6 +53,10 @@ struct st_rproc {
struct regmap *boot_base;
u32 boot_offset;
struct mbox_chan *mbox_chan[ST_RPROC_MAX_VRING][MBOX_MAX];
+ phys_addr_t mem_phys;
+ phys_addr_t mem_reloc;
+ void *mem_region;
+ size_t mem_size;
};
static void st_rproc_mbox_callback(struct device *dev, u32 msg)
@@ -156,10 +161,23 @@ static int st_rproc_stop(struct rproc *rproc)
return sw_err ?: pwr_err;
}
+static void *st_proc_da_to_va(struct rproc *rproc, u64 da, int len)
+{
+ struct st_rproc *ddata = rproc->priv;
+ int offset;
+
+ offset = da - ddata->mem_reloc;
+ if (offset < 0 || offset + len > ddata->mem_size)
+ return NULL;
+
+ return ddata->mem_region + offset;
+}
+
static struct rproc_ops st_rproc_ops = {
.kick = st_rproc_kick,
.start = st_rproc_start,
.stop = st_rproc_stop,
+ .da_to_va = st_proc_da_to_va,
};
/*
@@ -207,7 +225,8 @@ static int st_rproc_parse_dt(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct rproc *rproc = platform_get_drvdata(pdev);
struct st_rproc *ddata = rproc->priv;
- struct device_node *np = dev->of_node;
+ struct device_node *np = dev->of_node, *node;
+ struct resource res;
int err;
if (ddata->config->sw_reset) {
@@ -251,10 +270,23 @@ static int st_rproc_parse_dt(struct platform_device *pdev)
return -EINVAL;
}
- err = of_reserved_mem_device_init(dev);
- if (err) {
- dev_err(dev, "Failed to obtain shared memory\n");
+ node = of_parse_phandle(np, "memory-region", 0);
+ if (!node) {
+ dev_err(dev, "No memory-region specified\n");
+ return -EINVAL;
+ }
+
+ err = of_address_to_resource(node, 0, &res);
+ if (err)
return err;
+
+ ddata->mem_phys = ddata->mem_reloc = res.start;
+ ddata->mem_size = resource_size(&res);
+ ddata->mem_region = devm_ioremap_wc(dev, ddata->mem_phys, ddata->mem_size);
+ if (!ddata->mem_region) {
+ dev_err(dev, "Unable to map memory region: %pa+%zx\n",
+ &res.start, ddata->mem_size);
+ return -EBUSY;
}
err = clk_prepare(ddata->clk);
@@ -391,8 +423,6 @@ static int st_rproc_remove(struct platform_device *pdev)
clk_disable_unprepare(ddata->clk);
- of_reserved_mem_device_release(&pdev->dev);
-
mbox_free_channel(ddata->mbox_chan[0][MBOX_RX]);
mbox_free_channel(ddata->mbox_chan[1][MBOX_RX]);
mbox_free_channel(ddata->mbox_chan[0][MBOX_TX]);
ST remoteproc driver needs to provide information about carveout memory region to allow remoteproc core to load firmware and access trace buffer. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> --- drivers/remoteproc/st_remoteproc.c | 42 ++++++++++++++++++++++++++++++++------ 1 file changed, 36 insertions(+), 6 deletions(-)