@@ -140,11 +140,6 @@ struct q6v5 {
int active_reg_count;
int proxy_reg_count;
-
- struct clk *ahb_clk;
- struct clk *axi_clk;
- struct clk *rom_clk;
-
struct completion start_done;
struct completion stop_done;
bool running;
@@ -252,6 +247,38 @@ static void q6v5_regulator_disable(struct q6v5 *qproc,
}
}
+
+static int q6v5_clk_enable(struct device *dev,
+ struct clk **clks, int count)
+{
+ int rc;
+ int i;
+
+ for (i = 0; i < count; i++) {
+ rc = clk_prepare_enable(clks[i]);
+ if (rc) {
+ dev_err(dev, "Clock enable failed\n");
+ goto err;
+ }
+ }
+
+ return 0;
+err:
+ for (i--; i >= 0; i--)
+ clk_disable_unprepare(clks[i]);
+
+ return rc;
+}
+
+static void q6v5_clk_disable(struct device *dev,
+ struct clk **clks, int count)
+{
+ int i;
+
+ for (i = 0; i < count; i++)
+ clk_disable_unprepare(clks[i]);
+}
+
static int q6v5_load(struct rproc *rproc, const struct firmware *fw)
{
struct q6v5 *qproc = rproc->priv;
@@ -548,11 +575,18 @@ static int q6v5_start(struct rproc *rproc)
return ret;
}
+ ret = q6v5_clk_enable(qproc->dev, qproc->proxy_clks,
+ qproc->proxy_clk_count);
+ if (ret) {
+ dev_err(qproc->dev, "failed to enable proxy clocks\n");
+ goto disable_proxy_reg;
+ }
+
ret = q6v5_regulator_enable(qproc, qproc->active_regs,
qproc->active_reg_count);
if (ret) {
dev_err(qproc->dev, "failed to enable supplies\n");
- goto disable_proxy_reg;
+ goto disable_proxy_clk;
}
ret = reset_control_deassert(qproc->mss_restart);
if (ret) {
@@ -560,17 +594,12 @@ static int q6v5_start(struct rproc *rproc)
goto disable_vdd;
}
- ret = clk_prepare_enable(qproc->ahb_clk);
- if (ret)
+ ret = q6v5_clk_enable(qproc->dev, qproc->active_clks,
+ qproc->active_clk_count);
+ if (ret) {
+ dev_err(qproc->dev, "failed to enable clocks\n");
goto assert_reset;
-
- ret = clk_prepare_enable(qproc->axi_clk);
- if (ret)
- goto disable_ahb_clk;
-
- ret = clk_prepare_enable(qproc->rom_clk);
- if (ret)
- goto disable_axi_clk;
+ }
writel(qproc->mba_phys, qproc->rmb_base + RMB_MBA_IMAGE_REG);
@@ -605,25 +634,26 @@ static int q6v5_start(struct rproc *rproc)
qproc->running = true;
- /* TODO: All done, release the handover resources */
-
+ q6v5_clk_disable(qproc->dev, qproc->proxy_clks,
+ qproc->proxy_clk_count);
+ q6v5_regulator_disable(qproc, qproc->proxy_regs,
+ qproc->proxy_reg_count);
return 0;
halt_axi_ports:
q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_q6);
q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_modem);
q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
-
- clk_disable_unprepare(qproc->rom_clk);
-disable_axi_clk:
- clk_disable_unprepare(qproc->axi_clk);
-disable_ahb_clk:
- clk_disable_unprepare(qproc->ahb_clk);
+ q6v5_clk_disable(qproc->dev, qproc->active_clks,
+ qproc->active_clk_count);
assert_reset:
reset_control_assert(qproc->mss_restart);
disable_vdd:
q6v5_regulator_disable(qproc, qproc->active_regs,
qproc->active_reg_count);
+disable_proxy_clk:
+ q6v5_clk_disable(qproc->dev, qproc->proxy_clks,
+ qproc->proxy_clk_count);
disable_proxy_reg:
q6v5_regulator_disable(qproc, qproc->proxy_regs,
qproc->proxy_reg_count);
@@ -652,9 +682,10 @@ static int q6v5_stop(struct rproc *rproc)
q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
reset_control_assert(qproc->mss_restart);
- clk_disable_unprepare(qproc->rom_clk);
- clk_disable_unprepare(qproc->axi_clk);
- clk_disable_unprepare(qproc->ahb_clk);
+ q6v5_clk_disable(qproc->dev, qproc->active_clks,
+ qproc->active_clk_count);
+ q6v5_clk_disable(qproc->dev, qproc->proxy_clks,
+ qproc->proxy_clk_count);
q6v5_regulator_disable(qproc, qproc->active_regs,
qproc->active_reg_count);
q6v5_regulator_disable(qproc, qproc->proxy_regs,
Clock enable/disable routine will get additional input parameter of pointer of array of clock struct's and clock count, it will use these pre initialized values to turn them up/down. Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org> --- drivers/remoteproc/qcom_q6v5_pil.c | 85 ++++++++++++++++++++++++++------------ 1 file changed, 58 insertions(+), 27 deletions(-)