| Message ID | 20170526202140.10472-4-s-anna@ti.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
On Fri, May 26, 2017 at 03:21:39PM -0500, Suman Anna wrote: > Add the device tree bindings document for the DSP processor > subsystem devices on TI Davinci DA8xx/OMAP-L13x SoCs. "dt-bindings: remoteproc: ..." for the subject. > > Signed-off-by: Suman Anna <s-anna@ti.com> > --- > .../bindings/remoteproc/ti,davinci-rproc.txt | 92 ++++++++++++++++++++++ > 1 file changed, 92 insertions(+) > create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt > > diff --git a/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt b/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt > new file mode 100644 > index 000000000000..e53572e22002 > --- /dev/null > +++ b/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt > @@ -0,0 +1,92 @@ > +TI Davinci DSP devices > +======================= > + > +Binding status: Unstable - Subject to changes for DT clocks and resets Sorry, understandable if you didn't have documentation, but you work for TI, figure out what the clocks and resets are. > + > +The TI Davinci family of SoCs usually contains a TI DSP Core sub-system that > +is used to offload some of the processor-intensive tasks or algorithms, for > +achieving various system level goals. > + > +The processor cores in the sub-system usually contain additional sub-modules > +like L1 and/or L2 caches/SRAMs, an Interrupt Controller, an external memory > +controller, a dedicated local power/sleep controller etc. The DSP processor > +core used in Davinci SoCs is usually a C674x DSP CPU. I'm wondering if your compatible string is specific enough with this statement. > + > +DSP Device Node: > +================ > +Each DSP Core sub-system is represented as a single DT node. > + > +Required properties: > +-------------------- > +The following are the mandatory properties: > + > +- compatible: Should be one of the following, > + "ti,da850-dsp" for DSPs on OMAP-L138 SoCs > + > +- reg: Should contain an entry for each value in 'reg-names'. > + Each entry should have the memory region's start address > + and the size of the region, the representation matching > + the parent node's '#address-cells' and '#size-cells' values. > + > +- reg-names: Should contain strings with the following names, each > + representing a specific internal memory region or a > + specific register space, > + "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig_base" > + > +- interrupts: Should contain the interrupt number used to receive the > + interrupts from the DSP. The value should follow the > + interrupt-specifier format as dictated by the > + 'interrupt-parent' node. > + > +- memory-region: phandle to the reserved memory node to be associated > + with the remoteproc device. The reserved memory node > + can be a CMA memory node, and should be defined as > + per the bindings in > + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt > + > +Optional properties: > +-------------------- > +- interrupt-parent: phandle to the interrupt controller node. This property > + is needed if the device node hierarchy doesn't have an > + interrupt controller. > + > + > +Example: > +-------- > + > + /* DA850 DTS file */ Don't show the dts split in examples. > + { > + dsp: dsp@11800000 { > + compatible = "ti,da850-dsp"; > + reg = <0x11800000 0x40000>, > + <0x11e00000 0x8000>, > + <0x11f00000 0x8000>, > + <0x01c14044 0x4>, > + <0x01c14174 0x8>; > + reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", > + "chipsig"; > + interrupt-parent = <&intc>; > + interrupts = <28>; > + status = "disabled"; Don't show status in examples. > + }; > + > + }; > + > + /* OMAP-L138 LCDK Board file */ > + reserved-memory { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + dsp_cma_pool: dsp_cma@c3000000 { cma is a linuxism. dsp-memory@... > + compatible = "shared-dma-pool"; > + reg = <0xc3000000 0x1000000>; > + reusable; > + status = "okay"; > + }; > + }; > + > + &dsp { > + status = "okay"; > + memory-region = <&dsp_cma_pool>; > + }; > -- > 2.12.0 > -- To unsubscribe from this list: send the line "unsubscribe linux-remoteproc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Rob, On 05/31/2017 02:22 PM, Rob Herring wrote: > On Fri, May 26, 2017 at 03:21:39PM -0500, Suman Anna wrote: >> Add the device tree bindings document for the DSP processor >> subsystem devices on TI Davinci DA8xx/OMAP-L13x SoCs. > > "dt-bindings: remoteproc: ..." for the subject. Ok, will fix this on v2 > >> >> Signed-off-by: Suman Anna <s-anna@ti.com> >> --- >> .../bindings/remoteproc/ti,davinci-rproc.txt | 92 ++++++++++++++++++++++ >> 1 file changed, 92 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt >> >> diff --git a/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt b/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt >> new file mode 100644 >> index 000000000000..e53572e22002 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt >> @@ -0,0 +1,92 @@ >> +TI Davinci DSP devices >> +======================= >> + >> +Binding status: Unstable - Subject to changes for DT clocks and resets > > Sorry, understandable if you didn't have documentation, but you work for > TI, figure out what the clocks and resets are. Well, what I meant here is that the clocks and resets do not have a DT representation yet on these SoCs. And when they do have a DT representation, I would need to add the additional _required_ clocks and resets properties, hence the marking. > >> + >> +The TI Davinci family of SoCs usually contains a TI DSP Core sub-system that >> +is used to offload some of the processor-intensive tasks or algorithms, for >> +achieving various system level goals. >> + >> +The processor cores in the sub-system usually contain additional sub-modules >> +like L1 and/or L2 caches/SRAMs, an Interrupt Controller, an external memory >> +controller, a dedicated local power/sleep controller etc. The DSP processor >> +core used in Davinci SoCs is usually a C674x DSP CPU. > > I'm wondering if your compatible string is specific enough with this > statement. We always have integration aspects around these IPs into different SoCs, so the compatible is following the SoC name. Also note that the C674x is just the DSP core - one part of the DSP subsystem. > >> + >> +DSP Device Node: >> +================ >> +Each DSP Core sub-system is represented as a single DT node. >> + >> +Required properties: >> +-------------------- >> +The following are the mandatory properties: >> + >> +- compatible: Should be one of the following, >> + "ti,da850-dsp" for DSPs on OMAP-L138 SoCs >> + >> +- reg: Should contain an entry for each value in 'reg-names'. >> + Each entry should have the memory region's start address >> + and the size of the region, the representation matching >> + the parent node's '#address-cells' and '#size-cells' values. >> + >> +- reg-names: Should contain strings with the following names, each >> + representing a specific internal memory region or a >> + specific register space, >> + "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig_base" >> + >> +- interrupts: Should contain the interrupt number used to receive the >> + interrupts from the DSP. The value should follow the >> + interrupt-specifier format as dictated by the >> + 'interrupt-parent' node. >> + >> +- memory-region: phandle to the reserved memory node to be associated >> + with the remoteproc device. The reserved memory node >> + can be a CMA memory node, and should be defined as >> + per the bindings in >> + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt >> + >> +Optional properties: >> +-------------------- >> +- interrupt-parent: phandle to the interrupt controller node. This property >> + is needed if the device node hierarchy doesn't have an >> + interrupt controller. >> + >> + >> +Example: >> +-------- >> + >> + /* DA850 DTS file */ > > Don't show the dts split in examples. > >> + { >> + dsp: dsp@11800000 { >> + compatible = "ti,da850-dsp"; >> + reg = <0x11800000 0x40000>, >> + <0x11e00000 0x8000>, >> + <0x11f00000 0x8000>, >> + <0x01c14044 0x4>, >> + <0x01c14174 0x8>; >> + reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", >> + "chipsig"; >> + interrupt-parent = <&intc>; >> + interrupts = <28>; >> + status = "disabled"; > > Don't show status in examples. > >> + }; >> + >> + }; >> + >> + /* OMAP-L138 LCDK Board file */ >> + reserved-memory { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges; >> + >> + dsp_cma_pool: dsp_cma@c3000000 { > > cma is a linuxism. dsp-memory@... OK will fix up all these comments as well. regards Suman > >> + compatible = "shared-dma-pool"; >> + reg = <0xc3000000 0x1000000>; >> + reusable; >> + status = "okay"; >> + }; >> + }; >> + >> + &dsp { >> + status = "okay"; >> + memory-region = <&dsp_cma_pool>; >> + }; >> -- >> 2.12.0 >> -- To unsubscribe from this list: send the line "unsubscribe linux-remoteproc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt b/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt new file mode 100644 index 000000000000..e53572e22002 --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt @@ -0,0 +1,92 @@ +TI Davinci DSP devices +======================= + +Binding status: Unstable - Subject to changes for DT clocks and resets + +The TI Davinci family of SoCs usually contains a TI DSP Core sub-system that +is used to offload some of the processor-intensive tasks or algorithms, for +achieving various system level goals. + +The processor cores in the sub-system usually contain additional sub-modules +like L1 and/or L2 caches/SRAMs, an Interrupt Controller, an external memory +controller, a dedicated local power/sleep controller etc. The DSP processor +core used in Davinci SoCs is usually a C674x DSP CPU. + +DSP Device Node: +================ +Each DSP Core sub-system is represented as a single DT node. + +Required properties: +-------------------- +The following are the mandatory properties: + +- compatible: Should be one of the following, + "ti,da850-dsp" for DSPs on OMAP-L138 SoCs + +- reg: Should contain an entry for each value in 'reg-names'. + Each entry should have the memory region's start address + and the size of the region, the representation matching + the parent node's '#address-cells' and '#size-cells' values. + +- reg-names: Should contain strings with the following names, each + representing a specific internal memory region or a + specific register space, + "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig_base" + +- interrupts: Should contain the interrupt number used to receive the + interrupts from the DSP. The value should follow the + interrupt-specifier format as dictated by the + 'interrupt-parent' node. + +- memory-region: phandle to the reserved memory node to be associated + with the remoteproc device. The reserved memory node + can be a CMA memory node, and should be defined as + per the bindings in + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt + +Optional properties: +-------------------- +- interrupt-parent: phandle to the interrupt controller node. This property + is needed if the device node hierarchy doesn't have an + interrupt controller. + + +Example: +-------- + + /* DA850 DTS file */ + { + dsp: dsp@11800000 { + compatible = "ti,da850-dsp"; + reg = <0x11800000 0x40000>, + <0x11e00000 0x8000>, + <0x11f00000 0x8000>, + <0x01c14044 0x4>, + <0x01c14174 0x8>; + reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", + "chipsig"; + interrupt-parent = <&intc>; + interrupts = <28>; + status = "disabled"; + }; + + }; + + /* OMAP-L138 LCDK Board file */ + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dsp_cma_pool: dsp_cma@c3000000 { + compatible = "shared-dma-pool"; + reg = <0xc3000000 0x1000000>; + reusable; + status = "okay"; + }; + }; + + &dsp { + status = "okay"; + memory-region = <&dsp_cma_pool>; + };
Add the device tree bindings document for the DSP processor subsystem devices on TI Davinci DA8xx/OMAP-L13x SoCs. Signed-off-by: Suman Anna <s-anna@ti.com> --- .../bindings/remoteproc/ti,davinci-rproc.txt | 92 ++++++++++++++++++++++ 1 file changed, 92 insertions(+) create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt