From patchwork Wed Jun 14 20:48:53 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Oleksij Rempel X-Patchwork-Id: 9787423 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork.web.codeaurora.org (Postfix) with ESMTP id D78C160384 for ; Wed, 14 Jun 2017 20:49:49 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id CA34B284F1 for ; Wed, 14 Jun 2017 20:49:49 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id BEAF0284F8; Wed, 14 Jun 2017 20:49:49 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.9 required=2.0 tests=BAYES_00,RCVD_IN_DNSWL_HI autolearn=unavailable version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 56B48284F1 for ; Wed, 14 Jun 2017 20:49:48 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751760AbdFNUtr (ORCPT ); Wed, 14 Jun 2017 16:49:47 -0400 Received: from metis.ext.4.pengutronix.de ([92.198.50.35]:58701 "EHLO metis.ext.4.pengutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752515AbdFNUtc (ORCPT ); Wed, 14 Jun 2017 16:49:32 -0400 Received: from dude.hi.pengutronix.de ([2001:67c:670:100:1d::7]) by metis.ext.pengutronix.de with esmtps (TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.84_2) (envelope-from ) id 1dLFDp-0001ar-IV; Wed, 14 Jun 2017 22:49:01 +0200 Received: from ore by dude.hi.pengutronix.de with local (Exim 4.89) (envelope-from ) id 1dLFDn-0004mp-I2; Wed, 14 Jun 2017 22:48:59 +0200 From: Oleksij Rempel To: devicetree@vger.kernel.org, kernel@pengutronix.de, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Rob Herring , Mark Rutland , Russell King , Shawn Guo , Fabio Estevam , Ohad Ben-Cohen , Bjorn Andersson , linux-remoteproc@vger.kernel.org Cc: Oleksij Rempel Subject: [RFC PATCH 1/3] ARM: dts: imx7d: add imx7d-phyboard-zeta Date: Wed, 14 Jun 2017 22:48:53 +0200 Message-Id: <20170614204855.18347-2-o.rempel@pengutronix.de> X-Mailer: git-send-email 2.11.0 In-Reply-To: <20170614204855.18347-1-o.rempel@pengutronix.de> References: <20170614204855.18347-1-o.rempel@pengutronix.de> X-SA-Exim-Connect-IP: 2001:67c:670:100:1d::7 X-SA-Exim-Mail-From: ore@pengutronix.de X-SA-Exim-Scanned: No (on metis.ext.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: linux-remoteproc@vger.kernel.org Sender: linux-remoteproc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-remoteproc@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP From: Oleksij Rempel Signed-off-by: Oleksij Rempel --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx7d-pba-c-09.dtsi | 272 ++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx7d-peb-av-02.dtsi | 104 ++++++++++++ arch/arm/boot/dts/imx7d-peb-eval-02.dtsi | 130 ++++++++++++++ arch/arm/boot/dts/imx7d-phyboard-zeta.dts | 144 ++++++++++++++++ arch/arm/boot/dts/imx7d-phycore-som.dtsi | 272 ++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx7d-pinfunc-lpsr.h | 76 +++++++++ arch/arm/boot/dts/imx7s.dtsi | 1 + 8 files changed, 1000 insertions(+) create mode 100644 arch/arm/boot/dts/imx7d-pba-c-09.dtsi create mode 100644 arch/arm/boot/dts/imx7d-peb-av-02.dtsi create mode 100644 arch/arm/boot/dts/imx7d-peb-eval-02.dtsi create mode 100644 arch/arm/boot/dts/imx7d-phyboard-zeta.dts create mode 100644 arch/arm/boot/dts/imx7d-phycore-som.dtsi create mode 100644 arch/arm/boot/dts/imx7d-pinfunc-lpsr.h diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9c5e1d944d1c..cdd4bdb3a7c2 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -476,6 +476,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-cl-som-imx7.dtb \ imx7d-colibri-eval-v3.dtb \ imx7d-nitrogen7.dtb \ + imx7d-phyboard-zeta.dtb \ imx7d-sbc-imx7.dtb \ imx7d-sdb.dtb \ imx7d-sdb-sht11.dtb \ diff --git a/arch/arm/boot/dts/imx7d-pba-c-09.dtsi b/arch/arm/boot/dts/imx7d-pba-c-09.dtsi new file mode 100644 index 000000000000..4150c16684b7 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-pba-c-09.dtsi @@ -0,0 +1,272 @@ +/* + * Copyright (C) 2015 PHYTEC America, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + model = "Phytec i.MX7 phyBOARD-Zeta"; + compatible = "phytec,imx7d-pba-c-09", "phytec,imx7d-phycore-som", "fsl,imx7d"; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb_otg1_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg2_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + /* Enable if R9 is populated. Conflicts with userbtn2 on PEB-EVAL-02 */ + /* + reg_can1_3v3: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "can1-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + */ + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_1 &pinctrl_hog_2 &pinctrl_hog_lcd>; + + pinctrl_hog_2: hoggrp-2 { + fsl,pins = < + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* SD1 CD */ + MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 /* PCIe Disable */ + MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 0x59 /* PCIe Reset */ + MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 /* USB2 pwr */ + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x59 /* ETH2 Int_N */ + MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x59 /* ETH2 Reset_n */ + MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x59 /* User Button */ + MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x39 /* Boot Circuit Buffer Enable + 5K pull-up */ + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x59 + MX7D_PAD_SD1_CLK__SD1_CLK 0x19 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX 0x59 + MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX 0x59 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x5 + MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x5 + MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x5 + MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x5 + MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x5 + MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x5 + MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x5 + MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x5 + MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x5 + MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x5 + MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x5 + MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x5 + >; + }; +}; + +&iomuxc_lpsr { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_lpsr_1 &pinctrl_hog_lpsr_lcd>; + + pinctrl_hog_lpsr_1: hoggrp-lpsr_1 { + fsl,pins = < + MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x14 /* USB1 pwr */ + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO06__UART5_DCE_RX 0x79 + MX7D_PAD_GPIO1_IO07__UART5_DCE_TX 0x79 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x74 + >; + }; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + status = "disabled"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + no-1-8-v; /* Fixed voltage supply, doesn't support vsel */ + enable-sdio-wakeup; + keep-power-in-suspend; + status = "disabled"; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + /* Enable the following if SD1_RESET_B is used to enable/disable CAN xceiver + * xceiver-supply = <®_can1_3v3>; + */ + status = "disabled"; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>, + <&clks IMX7D_ENET2_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii"; + phy-handle = <ðphy1>; + fsl,magic-packet; + phy-reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; + status = "disabled"; +}; + +/* same MDIO bus as PHY on phyCORE SOM */ +&mdio { + ethphy1: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c22"; + interrupt-parent = <&gpio1>; + interrupts = <9 0>; + reg = <2>; + rxdv-skew-ps = <0>; + txen-skew-ps = <0>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + rxc-skew-ps = <1860>; + txc-skew-ps = <1860>; + }; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + dr_mode = "host"; + status = "disabled"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + status = "disabled"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,wdog_b; +}; + +/* DTS pinmuxing and bindings for LCD adapter PEB-AV-02 */ + +&iomuxc { + pinctrl_hog_lcd: hog_lcdgrp { + fsl,pins = < + MX7D_PAD_LCD_RESET__GPIO3_IO4 0x79 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f + MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f + >; + }; + + pinctrl_edt_ts_irq: tsirqgrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x59 + >; + }; +}; + +&iomuxc_lpsr { + pinctrl_pwm3: pwmgrp { + fsl,pins = < + MX7D_PAD_GPIO1_IO03__PWM3_OUT 0x30 + >; + }; + + pinctrl_hog_lpsr_lcd: hoggrp_lpsr_lcd { + fsl,pins = < + MX7D_PAD_GPIO1_IO01__GPIO1_IO1 0x59 + >; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "disabled"; + + ft5406: ft5406@38 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_edt_ts_irq>; + interrupt-parent = <&gpio2>; + interrupts = <14 0>; + reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; + status = "disabled"; + }; +}; + +#include "imx7d-peb-av-02.dtsi" + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "disabled"; +}; + +&backlight { + pwms = <&pwm3 0 5000000>; + enable-gpios = <&gpio1 1 0>; + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx7d-peb-av-02.dtsi b/arch/arm/boot/dts/imx7d-peb-av-02.dtsi new file mode 100644 index 000000000000..dcf117c71a92 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-peb-av-02.dtsi @@ -0,0 +1,104 @@ +/* + * Copyright (C) 2015 PHYTEC America, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + power-supply = <&lcd_3v3>; + status = "disabled"; + }; + + lcd_3v3: fixedregulator-lcd { + compatible = "regulator-fixed"; + regulator-name = "lcd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; +}; + +&iomuxc { + pinctrl_lcdif_ctrl: lcdifctrlgrp { + fsl,pins = < + MX7D_PAD_LCD_CLK__LCD_CLK 0x7e + MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x7e + MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x7e + MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x7e + >; + }; + + pinctrl_lcdif_dat: lcdifdatgrp { + fsl,pins = < + MX7D_PAD_LCD_DATA00__LCD_DATA0 0x7e + MX7D_PAD_LCD_DATA01__LCD_DATA1 0x7e + MX7D_PAD_LCD_DATA02__LCD_DATA2 0x7e + MX7D_PAD_LCD_DATA03__LCD_DATA3 0x7e + MX7D_PAD_LCD_DATA04__LCD_DATA4 0x7e + MX7D_PAD_LCD_DATA05__LCD_DATA5 0x7e + MX7D_PAD_LCD_DATA06__LCD_DATA6 0x7e + MX7D_PAD_LCD_DATA07__LCD_DATA7 0x7e + MX7D_PAD_LCD_DATA08__LCD_DATA8 0x7e + MX7D_PAD_LCD_DATA09__LCD_DATA9 0x7e + MX7D_PAD_LCD_DATA10__LCD_DATA10 0x7e + MX7D_PAD_LCD_DATA11__LCD_DATA11 0x7e + MX7D_PAD_LCD_DATA12__LCD_DATA12 0x7e + MX7D_PAD_LCD_DATA13__LCD_DATA13 0x7e + MX7D_PAD_LCD_DATA14__LCD_DATA14 0x7e + MX7D_PAD_LCD_DATA15__LCD_DATA15 0x7e + MX7D_PAD_LCD_DATA16__LCD_DATA16 0x7e + MX7D_PAD_LCD_DATA17__LCD_DATA17 0x7e + MX7D_PAD_LCD_DATA18__LCD_DATA18 0x7e + MX7D_PAD_LCD_DATA19__LCD_DATA19 0x7e + MX7D_PAD_LCD_DATA20__LCD_DATA20 0x7e + MX7D_PAD_LCD_DATA21__LCD_DATA21 0x7e + MX7D_PAD_LCD_DATA22__LCD_DATA22 0x7e + MX7D_PAD_LCD_DATA23__LCD_DATA23 0x7e + >; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat + &pinctrl_lcdif_ctrl>; + display = <&display0>; + lcd-supply = <&lcd_3v3>; + status = "disabled"; + + display0: display { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: ETM0700G0DH6 { + clock-frequency = <33000000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <216>; + hsync-len = <128>; + vback-porch = <35>; + vfront-porch = <10>; + vsync-len = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&ft5406 { + compatible = "edt,edt-ft5406", "edt,edt-ft5x06"; + reg = <0x38>; + status = "disabled"; +}; \ No newline at end of file diff --git a/arch/arm/boot/dts/imx7d-peb-eval-02.dtsi b/arch/arm/boot/dts/imx7d-peb-eval-02.dtsi new file mode 100644 index 000000000000..8bde5b13e702 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-peb-eval-02.dtsi @@ -0,0 +1,130 @@ +/* + * Copyright (C) 2015 PHYTEC America, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + phytec_leds: leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds_eval>; + status = "disabled"; + + led@0 { + label = "eval_led_1"; + gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "on"; + }; + + led@1 { + label = "eval_led_2"; + gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "on"; + }; + + led@2 { + label = "eval_led_3"; + gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "on"; + }; + }; + + phytec_buttons: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_btns_eval>; + status = "disabled"; + + userbtn@0 { + label = "eval_button_1"; + gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; + linux,code = <0x100>; /* BTN_MISC */ + }; + userbtn@1 { + label = "eval_button_2"; + gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; + linux,code = <0x100>; /* BTN_MISC */ + }; + + userbtn@2 { + label = "eval_button_3"; + gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; + linux,code = <0x100>; /* BTN_MISC */ + }; + }; +}; + +&iomuxc { + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f + MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f + >; + }; + + pinctrl_leds_eval: leds_evalgrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x79 /* Labeled UART6_RX on schematic */ + MX7D_PAD_UART3_RX_DATA__GPIO4_IO4 0x79 + MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x79 /* Labeled EXP_CONN_MUX5 on schematic */ + >; + }; + + pinctrl_btns_eval: btns_evalgrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x79 /* Labeled UART6_TX on schematic */ + MX7D_PAD_UART3_TX_DATA__GPIO4_IO5 0x79 + MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x79 /* Labeled EXP_CONN_MUX3 on schematic */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 + MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX 0x79 + MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX 0x79 + >; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "disabled"; + + i2c4_eeprom: eeprom@56 { + compatible = "onnn,24c32"; + reg = <0x56>; + pagesize = <32>; + status = "disabled"; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + status = "disabled"; +}; \ No newline at end of file diff --git a/arch/arm/boot/dts/imx7d-phyboard-zeta.dts b/arch/arm/boot/dts/imx7d-phyboard-zeta.dts new file mode 100644 index 000000000000..16cf12244f16 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-phyboard-zeta.dts @@ -0,0 +1,144 @@ +/* + * Copyright (C) 2015 PHYTEC America, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "imx7d-phycore-som.dtsi" +#include "imx7d-pba-c-09.dtsi" +#include "imx7d-peb-eval-02.dtsi" + +#include "imx7s.dtsi" + +/ { + chosen { + stdout-path = &uart5; + + environment@0 { + compatible = "barebox,environment"; + device-path = &bareboxenv; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; +}; + +/**** SOM - PCM-061 ****/ + +&fec1 { + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + status = "okay"; + + boot0-partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + barebox@0 { + label = "barebox"; + reg = <0x0 0x300000>; + }; + + bareboxenv: bareboxenv@300000 { + label = "bareboxenv"; + reg = <0x300000 0x0>; + }; + }; +}; + +&i2c_eeprom { + status = "okay"; +}; + +&i2c_rtc { + status = "okay"; +}; + +/**** Carrier Board - PBA-C-09 ****/ + +&uart5 { + status = "okay"; +}; + +&usdhc1 { + status = "okay"; +}; + +&fec2 { + status = "okay"; +}; + +/* Host mode */ +&usbotg1 { + status = "okay"; +}; + +/* OTG mode */ +&usbotg2 { + status = "okay"; +}; + +&flexcan1 { + status = "okay"; +}; + +&wdog1 { + status = "okay"; +}; + +/**** PEB-AV-02: touch controller ft5406, LCD and PWM backlight control ****/ +&i2c2 { + status = "okay"; +}; + +&ft5406 { + status = "okay"; +}; + +&lcdif { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&backlight { + status = "okay"; +}; + +/**** Interfaces on PEB-EVAL-02 ****/ + +&i2c4 { + status = "okay"; +}; + +&i2c4_eeprom { + status = "okay"; +}; + +&phytec_leds { + status = "okay"; +}; + +&phytec_buttons { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; \ No newline at end of file diff --git a/arch/arm/boot/dts/imx7d-phycore-som.dtsi b/arch/arm/boot/dts/imx7d-phycore-som.dtsi new file mode 100644 index 000000000000..ea8c801f3852 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-phycore-som.dtsi @@ -0,0 +1,272 @@ +/* + * Copyright (C) 2015 PHYTEC America, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +/ { + model = "Phytec i.MX7D phyCORE"; + compatible = "phytec,imx7d-phycore-som", "fsl,imx7d"; + + memory { + reg = <0x80000000 0x80000000>; + }; +}; + +&cpu0 { + arm-supply = <&sw1a_reg>; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pfuze3000@08 { + compatible = "fsl,pfuze3000"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1a { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + /* use sw1c_reg to align with pfuze100/pfuze200 */ + sw1c_reg: sw1b { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen2_reg: vldo2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen3_reg: vccsd { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: v33 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + i2c_eeprom: eeprom@50 { + compatible = "atmel,24c32"; + pagesize = <32>; + reg = <0x50>; + status = "disabled"; + }; + + i2c_rtc: rtc@68 { + compatible = "mc,rv4162"; + reg=<0x68>; + status = "disabled"; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_1>; + + pinctrl_hog_1: hoggrp-1 { + fsl,pins = < + MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x59 /* PMIC VSELECT */ + MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x59 /* ENET1_RESET_B */ + MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x59 /* ENET1_INT_B */ + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x7 + MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x7 + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x5 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x5 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x5 + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x5 + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x5 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x5 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x5 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x5 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x5 + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x5 + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x5 + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x5 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f + MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5d + MX7D_PAD_SD3_CLK__SD3_CLK 0x1d + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5d + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5d + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5d + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5d + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5d + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5d + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5d + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5d + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5e + MX7D_PAD_SD3_CLK__SD3_CLK 0x1e + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5e + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5e + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5e + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5e + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5e + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5e + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5e + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5e + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5f + MX7D_PAD_SD3_CLK__SD3_CLK 0x1f + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5f + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5f + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5f + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5f + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5f + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5f + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5f + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5f + >; + }; + + pinctrl_qspi1_1: qspi1grp_1 { + fsl,pins = < + MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 0x51 + MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1 0x51 + MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2 0x51 + MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3 0x51 + MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK 0x51 + MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B 0x51 + >; + }; +}; + +&sdma { + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii"; + phy-handle = <ðphy0>; + fsl,magic-packet; + phy-reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + status = "disabled"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + + /*ETH1 PHY on SOM, 25MHz crystal */ + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + interrupt-parent = <&gpio2>; + interrupts = <29 0>; + reg = <1>; + }; + }; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; + assigned-clock-rates = <400000000>; + bus-width = <8>; + tuning-step = <2>; + non-removable; + status = "disabled"; +}; \ No newline at end of file diff --git a/arch/arm/boot/dts/imx7d-pinfunc-lpsr.h b/arch/arm/boot/dts/imx7d-pinfunc-lpsr.h new file mode 100644 index 000000000000..378694ee05c2 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-pinfunc-lpsr.h @@ -0,0 +1,76 @@ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DTS_IMX7D_PINFUNC_LPSR_H +#define __DTS_IMX7D_PINFUNC_LPSR_H + +/* + * The pin function ID is a tuple of + * + * + * NOTE: imx7d-lpsr pin groups should be put under &iomuxc_lpsr node when used + */ + +#define MX7D_PAD_GPIO1_IO00__GPIO1_IO0 0x0000 0x0030 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO00__PWM4_OUT 0x0000 0x0030 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_ANY 0x0000 0x0030 0x0000 0x2 0x0 +#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x0000 0x0030 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG__RST_B_DEB 0x0000 0x0030 0x0000 0x4 0x0 +#define MX7D_PAD_GPIO1_IO01__GPIO1_IO1 0x0004 0x0034 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO01__PWM1_OUT 0x0004 0x0034 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO01__CCM_ENET_REF_CLK3 0x0004 0x0034 0x0000 0x2 0x0 +#define MX7D_PAD_GPIO1_IO01__SAI1_MCLK 0x0004 0x0034 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO01__ANATOP_24M_OUT 0x0004 0x0034 0x0000 0x4 0x0 +#define MX7D_PAD_GPIO1_IO01__OBSERVE0_OUT 0x0004 0x0034 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO02__GPIO1_IO2 0x0008 0x0038 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO02__PWM2_OUT 0x0008 0x0038 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO02__CCM_ENET_REF_CLK1 0x0008 0x0038 0x0564 0x2 0x3 +#define MX7D_PAD_GPIO1_IO02__SAI2_MCLK 0x0008 0x0038 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO02__CCM_CLKO1 0x0008 0x0038 0x0000 0x5 0x0 +#define MX7D_PAD_GPIO1_IO02__OBSERVE1_OUT 0x0008 0x0038 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO02__USB_OTG1_ID 0x0008 0x0038 0x0734 0x7 0x3 +#define MX7D_PAD_GPIO1_IO03__GPIO1_IO3 0x000C 0x003C 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO03__PWM3_OUT 0x000C 0x003C 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO03__CCM_ENET_REF_CLK2 0x000C 0x003C 0x0570 0x2 0x3 +#define MX7D_PAD_GPIO1_IO03__SAI3_MCLK 0x000C 0x003C 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO03__CCM_CLKO2 0x000C 0x003C 0x0000 0x5 0x0 +#define MX7D_PAD_GPIO1_IO03__OBSERVE2_OUT 0x000C 0x003C 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO03__USB_OTG2_ID 0x000C 0x003C 0x0730 0x7 0x3 +#define MX7D_PAD_GPIO1_IO04__GPIO1_IO4 0x0010 0x0040 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO04__USB_OTG1_OC 0x0010 0x0040 0x072C 0x1 0x1 +#define MX7D_PAD_GPIO1_IO04__FLEXTIMER1_CH4 0x0010 0x0040 0x0594 0x2 0x1 +#define MX7D_PAD_GPIO1_IO04__UART5_DCE_CTS 0x0010 0x0040 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO04__UART5_DTE_RTS 0x0010 0x0040 0x0710 0x3 0x4 +#define MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x0010 0x0040 0x05D4 0x4 0x2 +#define MX7D_PAD_GPIO1_IO04__OBSERVE3_OUT 0x0010 0x0040 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x0014 0x0044 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR 0x0014 0x0044 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO05__FLEXTIMER1_CH5 0x0014 0x0044 0x0598 0x2 0x1 +#define MX7D_PAD_GPIO1_IO05__UART5_DCE_RTS 0x0014 0x0044 0x0710 0x3 0x5 +#define MX7D_PAD_GPIO1_IO05__UART5_DTE_CTS 0x0014 0x0044 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO05__I2C1_SDA 0x0014 0x0044 0x05D8 0x4 0x2 +#define MX7D_PAD_GPIO1_IO05__OBSERVE4_OUT 0x0014 0x0044 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO06__GPIO1_IO6 0x0018 0x0048 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO06__USB_OTG2_OC 0x0018 0x0048 0x0728 0x1 0x1 +#define MX7D_PAD_GPIO1_IO06__FLEXTIMER1_CH6 0x0018 0x0048 0x059C 0x2 0x1 +#define MX7D_PAD_GPIO1_IO06__UART5_DCE_RX 0x0018 0x0048 0x0714 0x3 0x4 +#define MX7D_PAD_GPIO1_IO06__UART5_DTE_TX 0x0018 0x0048 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO06__I2C2_SCL 0x0018 0x0048 0x05DC 0x4 0x2 +#define MX7D_PAD_GPIO1_IO06__CCM_WAIT 0x0018 0x0048 0x0000 0x5 0x0 +#define MX7D_PAD_GPIO1_IO06__KPP_ROW4 0x0018 0x0048 0x0624 0x6 0x1 +#define MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x001C 0x004C 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO07__USB_OTG2_PWR 0x001C 0x004C 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO07__FLEXTIMER1_CH7 0x001C 0x004C 0x05A0 0x2 0x1 +#define MX7D_PAD_GPIO1_IO07__UART5_DCE_TX 0x001C 0x004C 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO07__UART5_DTE_RX 0x001C 0x004C 0x0714 0x3 0x5 +#define MX7D_PAD_GPIO1_IO07__I2C2_SDA 0x001C 0x004C 0x05E0 0x4 0x2 +#define MX7D_PAD_GPIO1_IO07__CCM_STOP 0x001C 0x004C 0x0000 0x5 0x0 +#define MX7D_PAD_GPIO1_IO07__KPP_COL4 0x001C 0x004C 0x0604 0x6 0x1 + +#endif /* __DTS_IMX7D_PINFUNC_LPSR_H */ diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index c4f12fd2e044..c138b0fb410a 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -46,6 +46,7 @@ #include #include #include "imx7d-pinfunc.h" +#include "imx7d-pinfunc-lpsr.h" / { #address-cells = <1>;