Message ID | 20180323130455.11470-2-brgl@bgdev.pl (mailing list archive) |
---|---|
State | Superseded, archived |
Headers | show |
On Fri, 2018-03-23 at 14:04 +0100, Bartosz Golaszewski wrote: > From: Bartosz Golaszewski <bgolaszewski@baylibre.com> > > Commit 7af1bb19f1d7 ("reset: add support for non-DT systems") > introduced reset control lookup mechanism for boards that still use > board files. > > The routine used to register lookup entries takes the corresponding > reset_controlled_dev structure as argument. > > It's been determined however that for the first user of this new > interface - davinci psc driver - it will be easier to register the > lookup entries using the reset controller device name. > > This patch changes the way lookup entries are added. > > Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> > --- > drivers/reset/core.c | 38 +++++++++++++++++++++++++++++++------- > include/linux/reset-controller.h | 14 ++++++++------ > 2 files changed, 39 insertions(+), 13 deletions(-) > > diff --git a/drivers/reset/core.c b/drivers/reset/core.c > index 06fa4907afc4..f4a29c046995 100644 > --- a/drivers/reset/core.c > +++ b/drivers/reset/core.c > @@ -153,12 +153,10 @@ EXPORT_SYMBOL_GPL(devm_reset_controller_register); > > /** > * reset_controller_add_lookup - register a set of lookup entries > - * @rcdev: initialized reset controller device owning the reset line > * @lookup: array of reset lookup entries > * @num_entries: number of entries in the lookup array > */ > -void reset_controller_add_lookup(struct reset_controller_dev *rcdev, > - struct reset_control_lookup *lookup, > +void reset_controller_add_lookup(struct reset_control_lookup *lookup, > unsigned int num_entries) > { > struct reset_control_lookup *entry; > @@ -168,13 +166,12 @@ void reset_controller_add_lookup(struct reset_controller_dev *rcdev, > for (i = 0; i < num_entries; i++) { > entry = &lookup[i]; > > - if (!entry->dev_id) { > - pr_warn("%s(): reset lookup entry has no dev_id, skipping\n", > + if (!entry->dev_id || !entry->provider) { > + pr_warn("%s(): reset lookup entry badly specified, skipping\n", > __func__); > continue; > } > > - entry->rcdev = rcdev; > list_add_tail(&entry->list, &reset_lookup_list); > } > mutex_unlock(&reset_lookup_mutex); > @@ -526,11 +523,30 @@ struct reset_control *__of_reset_control_get(struct device_node *node, > } > EXPORT_SYMBOL_GPL(__of_reset_control_get); > > +static struct reset_controller_dev * > +__reset_controller_by_name(const char *name) > +{ > + struct reset_controller_dev *rcdev; > + > + lockdep_assert_held(&reset_list_mutex); > + > + list_for_each_entry(rcdev, &reset_controller_list, list) { > + if (!rcdev->dev) > + continue; > + > + if (!strcmp(name, dev_name(rcdev->dev))) > + return rcdev; > + } > + > + return NULL; > +} > + > static struct reset_control * > __reset_control_get_from_lookup(struct device *dev, const char *con_id, > bool shared, bool optional) > { > const struct reset_control_lookup *lookup; > + struct reset_controller_dev *rcdev; > const char *dev_id = dev_name(dev); > struct reset_control *rstc = NULL; > > @@ -547,7 +563,15 @@ __reset_control_get_from_lookup(struct device *dev, const char *con_id, > ((con_id && lookup->con_id) && > !strcmp(con_id, lookup->con_id))) { > mutex_lock(&reset_list_mutex); > - rstc = __reset_control_get_internal(lookup->rcdev, > + rcdev = __reset_controller_by_name(lookup->provider); > + if (!rcdev) { > + mutex_unlock(&reset_list_mutex); > + mutex_unlock(&reset_lookup_mutex); > + /* Reset provider may not be ready yet. */ > + return -EPROBE_DEFER; Thanks, I've applied this patch to reset/next with the following change: - return -EPROBE_DEFER; + return ERR_PTR(-EPROBE_DEFER); regards Philipp -- To unsubscribe from this list: send the line "unsubscribe linux-remoteproc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
2018-03-23 14:43 GMT+01:00 Philipp Zabel <p.zabel@pengutronix.de>: > On Fri, 2018-03-23 at 14:04 +0100, Bartosz Golaszewski wrote: >> From: Bartosz Golaszewski <bgolaszewski@baylibre.com> >> >> Commit 7af1bb19f1d7 ("reset: add support for non-DT systems") >> introduced reset control lookup mechanism for boards that still use >> board files. >> >> The routine used to register lookup entries takes the corresponding >> reset_controlled_dev structure as argument. >> >> It's been determined however that for the first user of this new >> interface - davinci psc driver - it will be easier to register the >> lookup entries using the reset controller device name. >> >> This patch changes the way lookup entries are added. >> >> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> >> --- >> drivers/reset/core.c | 38 +++++++++++++++++++++++++++++++------- >> include/linux/reset-controller.h | 14 ++++++++------ >> 2 files changed, 39 insertions(+), 13 deletions(-) >> >> diff --git a/drivers/reset/core.c b/drivers/reset/core.c >> index 06fa4907afc4..f4a29c046995 100644 >> --- a/drivers/reset/core.c >> +++ b/drivers/reset/core.c >> @@ -153,12 +153,10 @@ EXPORT_SYMBOL_GPL(devm_reset_controller_register); >> >> /** >> * reset_controller_add_lookup - register a set of lookup entries >> - * @rcdev: initialized reset controller device owning the reset line >> * @lookup: array of reset lookup entries >> * @num_entries: number of entries in the lookup array >> */ >> -void reset_controller_add_lookup(struct reset_controller_dev *rcdev, >> - struct reset_control_lookup *lookup, >> +void reset_controller_add_lookup(struct reset_control_lookup *lookup, >> unsigned int num_entries) >> { >> struct reset_control_lookup *entry; >> @@ -168,13 +166,12 @@ void reset_controller_add_lookup(struct reset_controller_dev *rcdev, >> for (i = 0; i < num_entries; i++) { >> entry = &lookup[i]; >> >> - if (!entry->dev_id) { >> - pr_warn("%s(): reset lookup entry has no dev_id, skipping\n", >> + if (!entry->dev_id || !entry->provider) { >> + pr_warn("%s(): reset lookup entry badly specified, skipping\n", >> __func__); >> continue; >> } >> >> - entry->rcdev = rcdev; >> list_add_tail(&entry->list, &reset_lookup_list); >> } >> mutex_unlock(&reset_lookup_mutex); >> @@ -526,11 +523,30 @@ struct reset_control *__of_reset_control_get(struct device_node *node, >> } >> EXPORT_SYMBOL_GPL(__of_reset_control_get); >> >> +static struct reset_controller_dev * >> +__reset_controller_by_name(const char *name) >> +{ >> + struct reset_controller_dev *rcdev; >> + >> + lockdep_assert_held(&reset_list_mutex); >> + >> + list_for_each_entry(rcdev, &reset_controller_list, list) { >> + if (!rcdev->dev) >> + continue; >> + >> + if (!strcmp(name, dev_name(rcdev->dev))) >> + return rcdev; >> + } >> + >> + return NULL; >> +} >> + >> static struct reset_control * >> __reset_control_get_from_lookup(struct device *dev, const char *con_id, >> bool shared, bool optional) >> { >> const struct reset_control_lookup *lookup; >> + struct reset_controller_dev *rcdev; >> const char *dev_id = dev_name(dev); >> struct reset_control *rstc = NULL; >> >> @@ -547,7 +563,15 @@ __reset_control_get_from_lookup(struct device *dev, const char *con_id, >> ((con_id && lookup->con_id) && >> !strcmp(con_id, lookup->con_id))) { >> mutex_lock(&reset_list_mutex); >> - rstc = __reset_control_get_internal(lookup->rcdev, >> + rcdev = __reset_controller_by_name(lookup->provider); >> + if (!rcdev) { >> + mutex_unlock(&reset_list_mutex); >> + mutex_unlock(&reset_lookup_mutex); >> + /* Reset provider may not be ready yet. */ >> + return -EPROBE_DEFER; > > Thanks, I've applied this patch to reset/next with the following change: > > - return -EPROBE_DEFER; > + return ERR_PTR(-EPROBE_DEFER); > > regards > Philipp Oops, thanks for spotting that. Thanks, Bart -- To unsubscribe from this list: send the line "unsubscribe linux-remoteproc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/reset/core.c b/drivers/reset/core.c index 06fa4907afc4..f4a29c046995 100644 --- a/drivers/reset/core.c +++ b/drivers/reset/core.c @@ -153,12 +153,10 @@ EXPORT_SYMBOL_GPL(devm_reset_controller_register); /** * reset_controller_add_lookup - register a set of lookup entries - * @rcdev: initialized reset controller device owning the reset line * @lookup: array of reset lookup entries * @num_entries: number of entries in the lookup array */ -void reset_controller_add_lookup(struct reset_controller_dev *rcdev, - struct reset_control_lookup *lookup, +void reset_controller_add_lookup(struct reset_control_lookup *lookup, unsigned int num_entries) { struct reset_control_lookup *entry; @@ -168,13 +166,12 @@ void reset_controller_add_lookup(struct reset_controller_dev *rcdev, for (i = 0; i < num_entries; i++) { entry = &lookup[i]; - if (!entry->dev_id) { - pr_warn("%s(): reset lookup entry has no dev_id, skipping\n", + if (!entry->dev_id || !entry->provider) { + pr_warn("%s(): reset lookup entry badly specified, skipping\n", __func__); continue; } - entry->rcdev = rcdev; list_add_tail(&entry->list, &reset_lookup_list); } mutex_unlock(&reset_lookup_mutex); @@ -526,11 +523,30 @@ struct reset_control *__of_reset_control_get(struct device_node *node, } EXPORT_SYMBOL_GPL(__of_reset_control_get); +static struct reset_controller_dev * +__reset_controller_by_name(const char *name) +{ + struct reset_controller_dev *rcdev; + + lockdep_assert_held(&reset_list_mutex); + + list_for_each_entry(rcdev, &reset_controller_list, list) { + if (!rcdev->dev) + continue; + + if (!strcmp(name, dev_name(rcdev->dev))) + return rcdev; + } + + return NULL; +} + static struct reset_control * __reset_control_get_from_lookup(struct device *dev, const char *con_id, bool shared, bool optional) { const struct reset_control_lookup *lookup; + struct reset_controller_dev *rcdev; const char *dev_id = dev_name(dev); struct reset_control *rstc = NULL; @@ -547,7 +563,15 @@ __reset_control_get_from_lookup(struct device *dev, const char *con_id, ((con_id && lookup->con_id) && !strcmp(con_id, lookup->con_id))) { mutex_lock(&reset_list_mutex); - rstc = __reset_control_get_internal(lookup->rcdev, + rcdev = __reset_controller_by_name(lookup->provider); + if (!rcdev) { + mutex_unlock(&reset_list_mutex); + mutex_unlock(&reset_lookup_mutex); + /* Reset provider may not be ready yet. */ + return -EPROBE_DEFER; + } + + rstc = __reset_control_get_internal(rcdev, lookup->index, shared); mutex_unlock(&reset_list_mutex); diff --git a/include/linux/reset-controller.h b/include/linux/reset-controller.h index 25698f6c1fae..9326d671b6e6 100644 --- a/include/linux/reset-controller.h +++ b/include/linux/reset-controller.h @@ -30,24 +30,25 @@ struct of_phandle_args; * struct reset_control_lookup - represents a single lookup entry * * @list: internal list of all reset lookup entries - * @rcdev: reset controller device controlling this reset line + * @provider: name of the reset controller device controlling this reset line * @index: ID of the reset controller in the reset controller device * @dev_id: name of the device associated with this reset line * @con_id name of the reset line (can be NULL) */ struct reset_control_lookup { struct list_head list; - struct reset_controller_dev *rcdev; + const char *provider; unsigned int index; const char *dev_id; const char *con_id; }; -#define RESET_LOOKUP(_dev_id, _con_id, _index) \ +#define RESET_LOOKUP(_provider, _index, _dev_id, _con_id) \ { \ + .provider = _provider, \ + .index = _index, \ .dev_id = _dev_id, \ .con_id = _con_id, \ - .index = _index, \ } /** @@ -57,6 +58,7 @@ struct reset_control_lookup { * @owner: kernel module of the reset controller driver * @list: internal list of reset controller devices * @reset_control_head: head of internal list of requested reset controls + * @dev: corresponding driver model device struct * @of_node: corresponding device tree node as phandle target * @of_reset_n_cells: number of cells in reset line specifiers * @of_xlate: translation function to translate from specifier as found in the @@ -68,6 +70,7 @@ struct reset_controller_dev { struct module *owner; struct list_head list; struct list_head reset_control_head; + struct device *dev; struct device_node *of_node; int of_reset_n_cells; int (*of_xlate)(struct reset_controller_dev *rcdev, @@ -82,8 +85,7 @@ struct device; int devm_reset_controller_register(struct device *dev, struct reset_controller_dev *rcdev); -void reset_controller_add_lookup(struct reset_controller_dev *rcdev, - struct reset_control_lookup *lookup, +void reset_controller_add_lookup(struct reset_control_lookup *lookup, unsigned int num_entries); #endif