| Message ID | 20180515205345.8090-6-elder@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hello Alex, On 05/15/2018 10:53 PM, Alex Elder wrote: > From: Bjorn Andersson <bjorn.andersson@linaro.org> > > On rare occasions a subdevice might need to prepare some hardware > resources before a remote processor is booted, and clean up some > state after it has been shut down. > > One such example is the IP Accelerator found in various Qualcomm > platforms, which is accessed directly from both the modem remoteproc > and the application subsystem and requires an intricate lockstep > process when bringing the modem up and down. > > [elder@linaro.org: minor description and comment edits] > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > Acked-by: Alex Elder <elder@linaro.org> > --- > drivers/remoteproc/remoteproc_core.c | 56 ++++++++++++++++++++++++++-- > include/linux/remoteproc.h | 4 ++ > 2 files changed, 57 insertions(+), 3 deletions(-) > > diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c > index 2ede7ae6f5bc..283b258f5e0f 100644 > --- a/drivers/remoteproc/remoteproc_core.c > +++ b/drivers/remoteproc/remoteproc_core.c > @@ -776,6 +776,30 @@ static int rproc_handle_resources(struct rproc *rproc, > return ret; > } > > +static int rproc_prepare_subdevices(struct rproc *rproc) > +{ > + struct rproc_subdev *subdev; > + int ret; > + > + list_for_each_entry(subdev, &rproc->subdevs, node) { > + if (subdev->prepare) { > + ret = subdev->prepare(subdev); > + if (ret) > + goto unroll_preparation; > + } > + } > + > + return 0; > + > +unroll_preparation: > + list_for_each_entry_continue_reverse(subdev, &rproc->subdevs, node) { > + if (subdev->unprepare) > + subdev->unprepare(subdev); > + } Here you could call rproc_unprepare_subdevices instead of duplicating the code. regards Arnaud > + > + return ret; > +} > + > static int rproc_start_subdevices(struct rproc *rproc) > { > struct rproc_subdev *subdev; > @@ -810,6 +834,16 @@ static void rproc_stop_subdevices(struct rproc *rproc, bool crashed) > } > } > > +static void rproc_unprepare_subdevices(struct rproc *rproc) > +{ > + struct rproc_subdev *subdev; > + > + list_for_each_entry_reverse(subdev, &rproc->subdevs, node) { > + if (subdev->unprepare) > + subdev->unprepare(subdev); > + } > +} > + > /** > * rproc_coredump_cleanup() - clean up dump_segments list > * @rproc: the remote processor handle > @@ -902,11 +936,18 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw) > rproc->table_ptr = loaded_table; > } > > + ret = rproc_prepare_subdevices(rproc); > + if (ret) { > + dev_err(dev, "failed to prepare subdevices for %s: %d\n", > + rproc->name, ret); > + return ret; > + } > + > /* power up the remote processor */ > ret = rproc->ops->start(rproc); > if (ret) { > dev_err(dev, "can't start rproc %s: %d\n", rproc->name, ret); > - return ret; > + goto unprepare_subdevices; > } > > /* Start any subdevices for the remote processor */ > @@ -914,8 +955,7 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw) > if (ret) { > dev_err(dev, "failed to probe subdevices for %s: %d\n", > rproc->name, ret); > - rproc->ops->stop(rproc); > - return ret; > + goto stop_rproc; > } > > rproc->state = RPROC_RUNNING; > @@ -923,6 +963,14 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw) > dev_info(dev, "remote processor %s is now up\n", rproc->name); > > return 0; > + > +stop_rproc: > + rproc->ops->stop(rproc); > + > +unprepare_subdevices: > + rproc_unprepare_subdevices(rproc); > + > + return ret; > } > > /* > @@ -1035,6 +1083,8 @@ static int rproc_stop(struct rproc *rproc, bool crashed) > return ret; > } > > + rproc_unprepare_subdevices(rproc); > + > rproc->state = RPROC_OFFLINE; > > dev_info(dev, "stopped remote processor %s\n", rproc->name); > diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h > index 8f1426330cca..e3c5d856b6da 100644 > --- a/include/linux/remoteproc.h > +++ b/include/linux/remoteproc.h > @@ -477,15 +477,19 @@ struct rproc { > /** > * struct rproc_subdev - subdevice tied to a remoteproc > * @node: list node related to the rproc subdevs list > + * @prepare: prepare function, called before the rproc is started > * @start: start function, called after the rproc has been started > * @stop: stop function, called before the rproc is stopped; the @crashed > * parameter indicates if this originates from a recovery > + * @unprepare: unprepare function, called after the rproc has been stopped > */ > struct rproc_subdev { > struct list_head node; > > + int (*prepare)(struct rproc_subdev *subdev); > int (*start)(struct rproc_subdev *subdev); > void (*stop)(struct rproc_subdev *subdev, bool crashed); > + void (*unprepare)(struct rproc_subdev *subdev); > }; > > /* we currently support only two vrings per rvdev */ > -- To unsubscribe from this list: send the line "unsubscribe linux-remoteproc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 05/29/2018 04:16 AM, Arnaud Pouliquen wrote: . . . >> +unroll_preparation: >> + list_for_each_entry_continue_reverse(subdev, &rproc->subdevs, node) { >> + if (subdev->unprepare) >> + subdev->unprepare(subdev); >> + } > Here you could call rproc_unprepare_subdevices instead of duplicating > the code. I thought the same thing, but it won't work because we only want to unprepare those devices that were successfully prepared. Here we are unwinding the work that was partially done; in rproc_unprepare_subdevices() *all* subdevices have their unprepare function called. -Alex -- To unsubscribe from this list: send the line "unsubscribe linux-remoteproc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 05/29/2018 01:51 PM, Alex Elder wrote: > On 05/29/2018 04:16 AM, Arnaud Pouliquen wrote: > . . . > >>> +unroll_preparation: >>> + list_for_each_entry_continue_reverse(subdev, &rproc->subdevs, node) { >>> + if (subdev->unprepare) >>> + subdev->unprepare(subdev); >>> + } >> Here you could call rproc_unprepare_subdevices instead of duplicating >> the code. > > I thought the same thing, but it won't work because we only want to > unprepare those devices that were successfully prepared. Here we are > unwinding the work that was partially done; in rproc_unprepare_subdevices() > *all* subdevices have their unprepare function called. You right, i missed the "continue"... new for me as i never used it, thank for teaching! Arnaud -- To unsubscribe from this list: send the line "unsubscribe linux-remoteproc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Fabien, Please , could you add your "Tested-by" as you test it on ST platform? Thanks Arnaud On 05/15/2018 10:53 PM, Alex Elder wrote: > From: Bjorn Andersson <bjorn.andersson@linaro.org> > > On rare occasions a subdevice might need to prepare some hardware > resources before a remote processor is booted, and clean up some > state after it has been shut down. > > One such example is the IP Accelerator found in various Qualcomm > platforms, which is accessed directly from both the modem remoteproc > and the application subsystem and requires an intricate lockstep > process when bringing the modem up and down. > > [elder@linaro.org: minor description and comment edits] > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > Acked-by: Alex Elder <elder@linaro.org> > --- > drivers/remoteproc/remoteproc_core.c | 56 ++++++++++++++++++++++++++-- > include/linux/remoteproc.h | 4 ++ > 2 files changed, 57 insertions(+), 3 deletions(-) > > diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c > index 2ede7ae6f5bc..283b258f5e0f 100644 > --- a/drivers/remoteproc/remoteproc_core.c > +++ b/drivers/remoteproc/remoteproc_core.c > @@ -776,6 +776,30 @@ static int rproc_handle_resources(struct rproc *rproc, > return ret; > } > > +static int rproc_prepare_subdevices(struct rproc *rproc) > +{ > + struct rproc_subdev *subdev; > + int ret; > + > + list_for_each_entry(subdev, &rproc->subdevs, node) { > + if (subdev->prepare) { > + ret = subdev->prepare(subdev); > + if (ret) > + goto unroll_preparation; > + } > + } > + > + return 0; > + > +unroll_preparation: > + list_for_each_entry_continue_reverse(subdev, &rproc->subdevs, node) { > + if (subdev->unprepare) > + subdev->unprepare(subdev); > + } > + > + return ret; > +} > + > static int rproc_start_subdevices(struct rproc *rproc) > { > struct rproc_subdev *subdev; > @@ -810,6 +834,16 @@ static void rproc_stop_subdevices(struct rproc *rproc, bool crashed) > } > } > > +static void rproc_unprepare_subdevices(struct rproc *rproc) > +{ > + struct rproc_subdev *subdev; > + > + list_for_each_entry_reverse(subdev, &rproc->subdevs, node) { > + if (subdev->unprepare) > + subdev->unprepare(subdev); > + } > +} > + > /** > * rproc_coredump_cleanup() - clean up dump_segments list > * @rproc: the remote processor handle > @@ -902,11 +936,18 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw) > rproc->table_ptr = loaded_table; > } > > + ret = rproc_prepare_subdevices(rproc); > + if (ret) { > + dev_err(dev, "failed to prepare subdevices for %s: %d\n", > + rproc->name, ret); > + return ret; > + } > + > /* power up the remote processor */ > ret = rproc->ops->start(rproc); > if (ret) { > dev_err(dev, "can't start rproc %s: %d\n", rproc->name, ret); > - return ret; > + goto unprepare_subdevices; > } > > /* Start any subdevices for the remote processor */ > @@ -914,8 +955,7 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw) > if (ret) { > dev_err(dev, "failed to probe subdevices for %s: %d\n", > rproc->name, ret); > - rproc->ops->stop(rproc); > - return ret; > + goto stop_rproc; > } > > rproc->state = RPROC_RUNNING; > @@ -923,6 +963,14 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw) > dev_info(dev, "remote processor %s is now up\n", rproc->name); > > return 0; > + > +stop_rproc: > + rproc->ops->stop(rproc); > + > +unprepare_subdevices: > + rproc_unprepare_subdevices(rproc); > + > + return ret; > } > > /* > @@ -1035,6 +1083,8 @@ static int rproc_stop(struct rproc *rproc, bool crashed) > return ret; > } > > + rproc_unprepare_subdevices(rproc); > + > rproc->state = RPROC_OFFLINE; > > dev_info(dev, "stopped remote processor %s\n", rproc->name); > diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h > index 8f1426330cca..e3c5d856b6da 100644 > --- a/include/linux/remoteproc.h > +++ b/include/linux/remoteproc.h > @@ -477,15 +477,19 @@ struct rproc { > /** > * struct rproc_subdev - subdevice tied to a remoteproc > * @node: list node related to the rproc subdevs list > + * @prepare: prepare function, called before the rproc is started > * @start: start function, called after the rproc has been started > * @stop: stop function, called before the rproc is stopped; the @crashed > * parameter indicates if this originates from a recovery > + * @unprepare: unprepare function, called after the rproc has been stopped > */ > struct rproc_subdev { > struct list_head node; > > + int (*prepare)(struct rproc_subdev *subdev); > int (*start)(struct rproc_subdev *subdev); > void (*stop)(struct rproc_subdev *subdev, bool crashed); > + void (*unprepare)(struct rproc_subdev *subdev); > }; > > /* we currently support only two vrings per rvdev */ > -- To unsubscribe from this list: send the line "unsubscribe linux-remoteproc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, Adding my 'Tested-by'. BR, Fabien On 29/05/18 17:26, Arnaud Pouliquen wrote: > Hi Fabien, > Please , could you add your "Tested-by" as you test it on ST platform? > > Thanks > Arnaud > > On 05/15/2018 10:53 PM, Alex Elder wrote: >> From: Bjorn Andersson <bjorn.andersson@linaro.org> >> >> On rare occasions a subdevice might need to prepare some hardware >> resources before a remote processor is booted, and clean up some >> state after it has been shut down. >> >> One such example is the IP Accelerator found in various Qualcomm >> platforms, which is accessed directly from both the modem remoteproc >> and the application subsystem and requires an intricate lockstep >> process when bringing the modem up and down. >> >> [elder@linaro.org: minor description and comment edits] >> >> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> >> Acked-by: Alex Elder <elder@linaro.org> Tested-by: Fabien Dessenne <fabien.dessenne@st.com> >> --- >> drivers/remoteproc/remoteproc_core.c | 56 ++++++++++++++++++++++++++-- >> include/linux/remoteproc.h | 4 ++ >> 2 files changed, 57 insertions(+), 3 deletions(-) >> >> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c >> index 2ede7ae6f5bc..283b258f5e0f 100644 >> --- a/drivers/remoteproc/remoteproc_core.c >> +++ b/drivers/remoteproc/remoteproc_core.c >> @@ -776,6 +776,30 @@ static int rproc_handle_resources(struct rproc *rproc, >> return ret; >> } >> >> +static int rproc_prepare_subdevices(struct rproc *rproc) >> +{ >> + struct rproc_subdev *subdev; >> + int ret; >> + >> + list_for_each_entry(subdev, &rproc->subdevs, node) { >> + if (subdev->prepare) { >> + ret = subdev->prepare(subdev); >> + if (ret) >> + goto unroll_preparation; >> + } >> + } >> + >> + return 0; >> + >> +unroll_preparation: >> + list_for_each_entry_continue_reverse(subdev, &rproc->subdevs, node) { >> + if (subdev->unprepare) >> + subdev->unprepare(subdev); >> + } >> + >> + return ret; >> +} >> + >> static int rproc_start_subdevices(struct rproc *rproc) >> { >> struct rproc_subdev *subdev; >> @@ -810,6 +834,16 @@ static void rproc_stop_subdevices(struct rproc *rproc, bool crashed) >> } >> } >> >> +static void rproc_unprepare_subdevices(struct rproc *rproc) >> +{ >> + struct rproc_subdev *subdev; >> + >> + list_for_each_entry_reverse(subdev, &rproc->subdevs, node) { >> + if (subdev->unprepare) >> + subdev->unprepare(subdev); >> + } >> +} >> + >> /** >> * rproc_coredump_cleanup() - clean up dump_segments list >> * @rproc: the remote processor handle >> @@ -902,11 +936,18 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw) >> rproc->table_ptr = loaded_table; >> } >> >> + ret = rproc_prepare_subdevices(rproc); >> + if (ret) { >> + dev_err(dev, "failed to prepare subdevices for %s: %d\n", >> + rproc->name, ret); >> + return ret; >> + } >> + >> /* power up the remote processor */ >> ret = rproc->ops->start(rproc); >> if (ret) { >> dev_err(dev, "can't start rproc %s: %d\n", rproc->name, ret); >> - return ret; >> + goto unprepare_subdevices; >> } >> >> /* Start any subdevices for the remote processor */ >> @@ -914,8 +955,7 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw) >> if (ret) { >> dev_err(dev, "failed to probe subdevices for %s: %d\n", >> rproc->name, ret); >> - rproc->ops->stop(rproc); >> - return ret; >> + goto stop_rproc; >> } >> >> rproc->state = RPROC_RUNNING; >> @@ -923,6 +963,14 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw) >> dev_info(dev, "remote processor %s is now up\n", rproc->name); >> >> return 0; >> + >> +stop_rproc: >> + rproc->ops->stop(rproc); >> + >> +unprepare_subdevices: >> + rproc_unprepare_subdevices(rproc); >> + >> + return ret; >> } >> >> /* >> @@ -1035,6 +1083,8 @@ static int rproc_stop(struct rproc *rproc, bool crashed) >> return ret; >> } >> >> + rproc_unprepare_subdevices(rproc); >> + >> rproc->state = RPROC_OFFLINE; >> >> dev_info(dev, "stopped remote processor %s\n", rproc->name); >> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h >> index 8f1426330cca..e3c5d856b6da 100644 >> --- a/include/linux/remoteproc.h >> +++ b/include/linux/remoteproc.h >> @@ -477,15 +477,19 @@ struct rproc { >> /** >> * struct rproc_subdev - subdevice tied to a remoteproc >> * @node: list node related to the rproc subdevs list >> + * @prepare: prepare function, called before the rproc is started >> * @start: start function, called after the rproc has been started >> * @stop: stop function, called before the rproc is stopped; the @crashed >> * parameter indicates if this originates from a recovery >> + * @unprepare: unprepare function, called after the rproc has been stopped >> */ >> struct rproc_subdev { >> struct list_head node; >> >> + int (*prepare)(struct rproc_subdev *subdev); >> int (*start)(struct rproc_subdev *subdev); >> void (*stop)(struct rproc_subdev *subdev, bool crashed); >> + void (*unprepare)(struct rproc_subdev *subdev); >> }; >> >> /* we currently support only two vrings per rvdev */ >>
On 05/29/2018 10:30 AM, Fabien DESSENNE wrote: > Hi, > > Adding my 'Tested-by'. Normally you would say: Tested-by: Fabien DESSENNE <fabien.dessenne@st.com> The reason it might be important is you might wish to indicate the name and/or e-mail as something different from what you're now sending from. Is what I wrote above the way you would like it to appear? I will add that line to every one of my patches when I update them. Thanks. -Alex > > BR, > > Fabien > > > On 29/05/18 17:26, Arnaud Pouliquen wrote: >> Hi Fabien, >> Please , could you add your "Tested-by" as you test it on ST platform? >> >> Thanks >> Arnaud >> >> On 05/15/2018 10:53 PM, Alex Elder wrote: >>> From: Bjorn Andersson <bjorn.andersson@linaro.org> >>> >>> On rare occasions a subdevice might need to prepare some hardware >>> resources before a remote processor is booted, and clean up some >>> state after it has been shut down. >>> >>> One such example is the IP Accelerator found in various Qualcomm >>> platforms, which is accessed directly from both the modem remoteproc >>> and the application subsystem and requires an intricate lockstep >>> process when bringing the modem up and down. >>> >>> [elder@linaro.org: minor description and comment edits] >>> >>> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> >>> Acked-by: Alex Elder <elder@linaro.org> > > Tested-by: Fabien Dessenne <fabien.dessenne@st.com> > >>> --- >>> drivers/remoteproc/remoteproc_core.c | 56 ++++++++++++++++++++++++++-- >>> include/linux/remoteproc.h | 4 ++ >>> 2 files changed, 57 insertions(+), 3 deletions(-) >>> >>> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c >>> index 2ede7ae6f5bc..283b258f5e0f 100644 >>> --- a/drivers/remoteproc/remoteproc_core.c >>> +++ b/drivers/remoteproc/remoteproc_core.c >>> @@ -776,6 +776,30 @@ static int rproc_handle_resources(struct rproc *rproc, >>> return ret; >>> } >>> >>> +static int rproc_prepare_subdevices(struct rproc *rproc) >>> +{ >>> + struct rproc_subdev *subdev; >>> + int ret; >>> + >>> + list_for_each_entry(subdev, &rproc->subdevs, node) { >>> + if (subdev->prepare) { >>> + ret = subdev->prepare(subdev); >>> + if (ret) >>> + goto unroll_preparation; >>> + } >>> + } >>> + >>> + return 0; >>> + >>> +unroll_preparation: >>> + list_for_each_entry_continue_reverse(subdev, &rproc->subdevs, node) { >>> + if (subdev->unprepare) >>> + subdev->unprepare(subdev); >>> + } >>> + >>> + return ret; >>> +} >>> + >>> static int rproc_start_subdevices(struct rproc *rproc) >>> { >>> struct rproc_subdev *subdev; >>> @@ -810,6 +834,16 @@ static void rproc_stop_subdevices(struct rproc *rproc, bool crashed) >>> } >>> } >>> >>> +static void rproc_unprepare_subdevices(struct rproc *rproc) >>> +{ >>> + struct rproc_subdev *subdev; >>> + >>> + list_for_each_entry_reverse(subdev, &rproc->subdevs, node) { >>> + if (subdev->unprepare) >>> + subdev->unprepare(subdev); >>> + } >>> +} >>> + >>> /** >>> * rproc_coredump_cleanup() - clean up dump_segments list >>> * @rproc: the remote processor handle >>> @@ -902,11 +936,18 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw) >>> rproc->table_ptr = loaded_table; >>> } >>> >>> + ret = rproc_prepare_subdevices(rproc); >>> + if (ret) { >>> + dev_err(dev, "failed to prepare subdevices for %s: %d\n", >>> + rproc->name, ret); >>> + return ret; >>> + } >>> + >>> /* power up the remote processor */ >>> ret = rproc->ops->start(rproc); >>> if (ret) { >>> dev_err(dev, "can't start rproc %s: %d\n", rproc->name, ret); >>> - return ret; >>> + goto unprepare_subdevices; >>> } >>> >>> /* Start any subdevices for the remote processor */ >>> @@ -914,8 +955,7 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw) >>> if (ret) { >>> dev_err(dev, "failed to probe subdevices for %s: %d\n", >>> rproc->name, ret); >>> - rproc->ops->stop(rproc); >>> - return ret; >>> + goto stop_rproc; >>> } >>> >>> rproc->state = RPROC_RUNNING; >>> @@ -923,6 +963,14 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw) >>> dev_info(dev, "remote processor %s is now up\n", rproc->name); >>> >>> return 0; >>> + >>> +stop_rproc: >>> + rproc->ops->stop(rproc); >>> + >>> +unprepare_subdevices: >>> + rproc_unprepare_subdevices(rproc); >>> + >>> + return ret; >>> } >>> >>> /* >>> @@ -1035,6 +1083,8 @@ static int rproc_stop(struct rproc *rproc, bool crashed) >>> return ret; >>> } >>> >>> + rproc_unprepare_subdevices(rproc); >>> + >>> rproc->state = RPROC_OFFLINE; >>> >>> dev_info(dev, "stopped remote processor %s\n", rproc->name); >>> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h >>> index 8f1426330cca..e3c5d856b6da 100644 >>> --- a/include/linux/remoteproc.h >>> +++ b/include/linux/remoteproc.h >>> @@ -477,15 +477,19 @@ struct rproc { >>> /** >>> * struct rproc_subdev - subdevice tied to a remoteproc >>> * @node: list node related to the rproc subdevs list >>> + * @prepare: prepare function, called before the rproc is started >>> * @start: start function, called after the rproc has been started >>> * @stop: stop function, called before the rproc is stopped; the @crashed >>> * parameter indicates if this originates from a recovery >>> + * @unprepare: unprepare function, called after the rproc has been stopped >>> */ >>> struct rproc_subdev { >>> struct list_head node; >>> >>> + int (*prepare)(struct rproc_subdev *subdev); >>> int (*start)(struct rproc_subdev *subdev); >>> void (*stop)(struct rproc_subdev *subdev, bool crashed); >>> + void (*unprepare)(struct rproc_subdev *subdev); >>> }; >>> >>> /* we currently support only two vrings per rvdev */ >>> -- To unsubscribe from this list: send the line "unsubscribe linux-remoteproc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Alex, That's the correct syntax (I wrote it with the official form a few lines later (after the Signed-off-by / Acked-by)). You can add it to the full patch set (although I tested only the core part + the future ST driver part) BR Fabien On 29/05/18 17:31, Alex Elder wrote: > On 05/29/2018 10:30 AM, Fabien DESSENNE wrote: >> Hi, >> >> Adding my 'Tested-by'. > Normally you would say: > > Tested-by: Fabien DESSENNE <fabien.dessenne@st.com> > > The reason it might be important is you might wish to indicate the > name and/or e-mail as something different from what you're now > sending from. > > Is what I wrote above the way you would like it to appear? > > I will add that line to every one of my patches when I update them. > > Thanks. > > -Alex >> BR, >> >> Fabien >> >> >> On 29/05/18 17:26, Arnaud Pouliquen wrote: >>> Hi Fabien, >>> Please , could you add your "Tested-by" as you test it on ST platform? >>> >>> Thanks >>> Arnaud >>> >>> On 05/15/2018 10:53 PM, Alex Elder wrote: >>>> From: Bjorn Andersson <bjorn.andersson@linaro.org> >>>> >>>> On rare occasions a subdevice might need to prepare some hardware >>>> resources before a remote processor is booted, and clean up some >>>> state after it has been shut down. >>>> >>>> One such example is the IP Accelerator found in various Qualcomm >>>> platforms, which is accessed directly from both the modem remoteproc >>>> and the application subsystem and requires an intricate lockstep >>>> process when bringing the modem up and down. >>>> >>>> [elder@linaro.org: minor description and comment edits] >>>> >>>> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> >>>> Acked-by: Alex Elder <elder@linaro.org> >> Tested-by: Fabien Dessenne <fabien.dessenne@st.com> >> >>>> --- >>>> drivers/remoteproc/remoteproc_core.c | 56 ++++++++++++++++++++++++++-- >>>> include/linux/remoteproc.h | 4 ++ >>>> 2 files changed, 57 insertions(+), 3 deletions(-) >>>> >>>> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c >>>> index 2ede7ae6f5bc..283b258f5e0f 100644 >>>> --- a/drivers/remoteproc/remoteproc_core.c >>>> +++ b/drivers/remoteproc/remoteproc_core.c >>>> @@ -776,6 +776,30 @@ static int rproc_handle_resources(struct rproc *rproc, >>>> return ret; >>>> } >>>> >>>> +static int rproc_prepare_subdevices(struct rproc *rproc) >>>> +{ >>>> + struct rproc_subdev *subdev; >>>> + int ret; >>>> + >>>> + list_for_each_entry(subdev, &rproc->subdevs, node) { >>>> + if (subdev->prepare) { >>>> + ret = subdev->prepare(subdev); >>>> + if (ret) >>>> + goto unroll_preparation; >>>> + } >>>> + } >>>> + >>>> + return 0; >>>> + >>>> +unroll_preparation: >>>> + list_for_each_entry_continue_reverse(subdev, &rproc->subdevs, node) { >>>> + if (subdev->unprepare) >>>> + subdev->unprepare(subdev); >>>> + } >>>> + >>>> + return ret; >>>> +} >>>> + >>>> static int rproc_start_subdevices(struct rproc *rproc) >>>> { >>>> struct rproc_subdev *subdev; >>>> @@ -810,6 +834,16 @@ static void rproc_stop_subdevices(struct rproc *rproc, bool crashed) >>>> } >>>> } >>>> >>>> +static void rproc_unprepare_subdevices(struct rproc *rproc) >>>> +{ >>>> + struct rproc_subdev *subdev; >>>> + >>>> + list_for_each_entry_reverse(subdev, &rproc->subdevs, node) { >>>> + if (subdev->unprepare) >>>> + subdev->unprepare(subdev); >>>> + } >>>> +} >>>> + >>>> /** >>>> * rproc_coredump_cleanup() - clean up dump_segments list >>>> * @rproc: the remote processor handle >>>> @@ -902,11 +936,18 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw) >>>> rproc->table_ptr = loaded_table; >>>> } >>>> >>>> + ret = rproc_prepare_subdevices(rproc); >>>> + if (ret) { >>>> + dev_err(dev, "failed to prepare subdevices for %s: %d\n", >>>> + rproc->name, ret); >>>> + return ret; >>>> + } >>>> + >>>> /* power up the remote processor */ >>>> ret = rproc->ops->start(rproc); >>>> if (ret) { >>>> dev_err(dev, "can't start rproc %s: %d\n", rproc->name, ret); >>>> - return ret; >>>> + goto unprepare_subdevices; >>>> } >>>> >>>> /* Start any subdevices for the remote processor */ >>>> @@ -914,8 +955,7 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw) >>>> if (ret) { >>>> dev_err(dev, "failed to probe subdevices for %s: %d\n", >>>> rproc->name, ret); >>>> - rproc->ops->stop(rproc); >>>> - return ret; >>>> + goto stop_rproc; >>>> } >>>> >>>> rproc->state = RPROC_RUNNING; >>>> @@ -923,6 +963,14 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw) >>>> dev_info(dev, "remote processor %s is now up\n", rproc->name); >>>> >>>> return 0; >>>> + >>>> +stop_rproc: >>>> + rproc->ops->stop(rproc); >>>> + >>>> +unprepare_subdevices: >>>> + rproc_unprepare_subdevices(rproc); >>>> + >>>> + return ret; >>>> } >>>> >>>> /* >>>> @@ -1035,6 +1083,8 @@ static int rproc_stop(struct rproc *rproc, bool crashed) >>>> return ret; >>>> } >>>> >>>> + rproc_unprepare_subdevices(rproc); >>>> + >>>> rproc->state = RPROC_OFFLINE; >>>> >>>> dev_info(dev, "stopped remote processor %s\n", rproc->name); >>>> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h >>>> index 8f1426330cca..e3c5d856b6da 100644 >>>> --- a/include/linux/remoteproc.h >>>> +++ b/include/linux/remoteproc.h >>>> @@ -477,15 +477,19 @@ struct rproc { >>>> /** >>>> * struct rproc_subdev - subdevice tied to a remoteproc >>>> * @node: list node related to the rproc subdevs list >>>> + * @prepare: prepare function, called before the rproc is started >>>> * @start: start function, called after the rproc has been started >>>> * @stop: stop function, called before the rproc is stopped; the @crashed >>>> * parameter indicates if this originates from a recovery >>>> + * @unprepare: unprepare function, called after the rproc has been stopped >>>> */ >>>> struct rproc_subdev { >>>> struct list_head node; >>>> >>>> + int (*prepare)(struct rproc_subdev *subdev); >>>> int (*start)(struct rproc_subdev *subdev); >>>> void (*stop)(struct rproc_subdev *subdev, bool crashed); >>>> + void (*unprepare)(struct rproc_subdev *subdev); >>>> }; >>>> >>>> /* we currently support only two vrings per rvdev */ >>>>
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c index 2ede7ae6f5bc..283b258f5e0f 100644 --- a/drivers/remoteproc/remoteproc_core.c +++ b/drivers/remoteproc/remoteproc_core.c @@ -776,6 +776,30 @@ static int rproc_handle_resources(struct rproc *rproc, return ret; } +static int rproc_prepare_subdevices(struct rproc *rproc) +{ + struct rproc_subdev *subdev; + int ret; + + list_for_each_entry(subdev, &rproc->subdevs, node) { + if (subdev->prepare) { + ret = subdev->prepare(subdev); + if (ret) + goto unroll_preparation; + } + } + + return 0; + +unroll_preparation: + list_for_each_entry_continue_reverse(subdev, &rproc->subdevs, node) { + if (subdev->unprepare) + subdev->unprepare(subdev); + } + + return ret; +} + static int rproc_start_subdevices(struct rproc *rproc) { struct rproc_subdev *subdev; @@ -810,6 +834,16 @@ static void rproc_stop_subdevices(struct rproc *rproc, bool crashed) } } +static void rproc_unprepare_subdevices(struct rproc *rproc) +{ + struct rproc_subdev *subdev; + + list_for_each_entry_reverse(subdev, &rproc->subdevs, node) { + if (subdev->unprepare) + subdev->unprepare(subdev); + } +} + /** * rproc_coredump_cleanup() - clean up dump_segments list * @rproc: the remote processor handle @@ -902,11 +936,18 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw) rproc->table_ptr = loaded_table; } + ret = rproc_prepare_subdevices(rproc); + if (ret) { + dev_err(dev, "failed to prepare subdevices for %s: %d\n", + rproc->name, ret); + return ret; + } + /* power up the remote processor */ ret = rproc->ops->start(rproc); if (ret) { dev_err(dev, "can't start rproc %s: %d\n", rproc->name, ret); - return ret; + goto unprepare_subdevices; } /* Start any subdevices for the remote processor */ @@ -914,8 +955,7 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw) if (ret) { dev_err(dev, "failed to probe subdevices for %s: %d\n", rproc->name, ret); - rproc->ops->stop(rproc); - return ret; + goto stop_rproc; } rproc->state = RPROC_RUNNING; @@ -923,6 +963,14 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw) dev_info(dev, "remote processor %s is now up\n", rproc->name); return 0; + +stop_rproc: + rproc->ops->stop(rproc); + +unprepare_subdevices: + rproc_unprepare_subdevices(rproc); + + return ret; } /* @@ -1035,6 +1083,8 @@ static int rproc_stop(struct rproc *rproc, bool crashed) return ret; } + rproc_unprepare_subdevices(rproc); + rproc->state = RPROC_OFFLINE; dev_info(dev, "stopped remote processor %s\n", rproc->name); diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h index 8f1426330cca..e3c5d856b6da 100644 --- a/include/linux/remoteproc.h +++ b/include/linux/remoteproc.h @@ -477,15 +477,19 @@ struct rproc { /** * struct rproc_subdev - subdevice tied to a remoteproc * @node: list node related to the rproc subdevs list + * @prepare: prepare function, called before the rproc is started * @start: start function, called after the rproc has been started * @stop: stop function, called before the rproc is stopped; the @crashed * parameter indicates if this originates from a recovery + * @unprepare: unprepare function, called after the rproc has been stopped */ struct rproc_subdev { struct list_head node; + int (*prepare)(struct rproc_subdev *subdev); int (*start)(struct rproc_subdev *subdev); void (*stop)(struct rproc_subdev *subdev, bool crashed); + void (*unprepare)(struct rproc_subdev *subdev); }; /* we currently support only two vrings per rvdev */